{"title":"Body Casting Materials","description":"","products":[{"product_id":"370-sd-5lb-unit","title":"370-SD 5lb Unit Alginate","description":"\u003cp\u003eOur friends in the Orthotics \u0026amp; Prosthetics industry asked us for a formula that would make one of their tough jobs easier. They asked us for a pourable alginate that would set up very, very firmly to help them in fitting artificial arms and legs. Our R\u0026amp;D staff came up with a great formula that is the standard in this large industry.\u003c\/p\u003e\r\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shoplightspeed.com\/shops\/606431\/files\/52157963\/370specs.png\" alt=\"\" width=\"956\" height=\"241\"\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\u003cstrong\u003eMixes smoothly\u003c\/strong\u003e\u003c\/li\u003e\r\n\u003cli\u003e\u003cstrong\u003eSets in about 3 minutes with 70°F water\u003c\/strong\u003e\u003c\/li\u003e\r\n\u003cli\u003e\u003cstrong\u003eSets very firmly\u003c\/strong\u003e\u003c\/li\u003e\r\n\u003cli\u003e\u003cstrong\u003eLow shrinkage rate\u003c\/strong\u003e\u003c\/li\u003e\r\n\u003cli\u003e\u003cstrong\u003eSpecifically designed for Socket Duplication\u003c\/strong\u003e\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/msds\/files\/1901_ACCUCAST%20570-PGV;%20ACCUCAST%20880-B;%20ACCUCAST%20GENESIS%20V;%20%20ACCUCAST%20380-WHITE;%20ACCUCAST%20390-S2;%20ACCUCAST%20590-IBG;%20ACCUCAST%20370-S.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSDS\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/tb\/files\/370SD_TB.pdf\" target=\"_blank\" rel=\"noopener\"\u003eTDS\u003c\/a\u003e\u003c\/p\u003e","brand":"Accu-Cast","offers":[{"title":"Default","offer_id":48014392394043,"sku":"10029843","price":62.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/370sd-combo-bag-1400x1050-85253-93079-445361623356.jpg?v=1710971401"},{"product_id":"400ml-manual-dispensing-gun","title":"400ml Manual Dispensing Gun","description":"\u003cp\u003eDispensing gun for \u003cstrong\u003eBody Double™\u003c\/strong\u003e, \u003cstrong\u003eDragon Skin™\u003c\/strong\u003e, \u003cstrong\u003eMold Star™\u003c\/strong\u003e, and \u003cstrong\u003eEcoflex™\u003c\/strong\u003e 400 ml and \u003cstrong\u003eSuperInstant™\u003c\/strong\u003e 200ml cartridges through a static mixing tube. Squeeze the handles of the manual gun.\u003c\/p\u003e","brand":"Smooth-On","offers":[{"title":"Default","offer_id":48014430994747,"sku":"99816","price":99.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/400ML-Manual-Gun-hand-1400x1050.jpg?v=1748697989"},{"product_id":"adult-hand-casting-kit","title":"Adult Hand Casting Kit Alginate","description":"\u003cp\u003eYou too can now make a hard stone casting with amazing detail of up to two adult hands with our complete Adult Hand Casting Kit. Making a hand sculpture with this kit is lots of fun and a terrific way to learn this fascinating art form. \u003cem\u003e\u003cstrong\u003eVery Popular Item for Valentines Day. Great Wedding Present.\u003c\/strong\u003e \u003c\/em\u003ePlease don't wait for the last minute to order.\u003c\/p\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" href=\"https:\/\/www.smooth-on.com\/assets\/accu-cast\/instructions\/HandKit_Instructions_single_pages.pdf\" target=\"_blank\"\u003eINSTRUCTIONS\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eKit Contains:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOne bag HandGel (570) Alginate- 1.5 pounds\u003c\/li\u003e\n\u003cli\u003eOne bag LiquiStone Gypsum Cement- 3.5 pounds\u003c\/li\u003e\n\u003cli\u003eOne 4-Qt molding bucket\u003c\/li\u003e\n\u003cli\u003eOne small bag of clay for long fingernails\u003c\/li\u003e\n\u003cli\u003eOne small bag of LiquiStone for filling small bubbles, etc.\u003c\/li\u003e\n\u003cli\u003eOne illustrated procedural guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" href=\"https:\/\/www.smooth-on.com\/msds\/files\/1901_ACCUCAST%20570-PGV;%20ACCUCAST%20880-B;%20ACCUCAST%20GENESIS%20V;%20%20ACCUCAST%20380-WHITE;%20ACCUCAST%20390-S2;%20ACCUCAST%20590-IBG;%20ACCUCAST%20370-S.pdf\" target=\"_blank\"\u003eAlginate SDS\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" href=\"https:\/\/www.smooth-on.com\/msds\/files\/ACCU-CAST%20LIQUISTONE-REV.1.pdf\" target=\"_blank\"\u003eLiquistone SDS\u003c\/a\u003e\u003c\/p\u003e","brand":"Accu-Cast","offers":[{"title":"Default","offer_id":48014518419771,"sku":"10029684","price":45.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/adult-hand-casting-kit-1000x750-w-casting_49e34c42-bfb8-4551-ac69-d9dfbd2052fa.jpg?v=1710983972"},{"product_id":"algislo-16oz","title":"Algislo Alginate Retarder 16oz","description":"\u003cp\u003e\u003c\/p\u003e\u003cdiv id=\"description\" class=\"data item content\" role=\"tabpanel\" data-role=\"content\" aria-labelledby=\"tab-label-description\" aria-hidden=\"false\"\u003e\r\n\u003cdiv class=\"product attribute description\"\u003e\r\n\u003cdiv class=\"value\"\u003e\r\n\u003ch3 align=\"center\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan style=\"font-family: verdana,geneva; color: #ff0000;\"\u003eINTRODUCING ALGISLO\u003cspan style=\"font-size: xx-small;\"\u003etm\u003c\/span\u003e \u003cbr\u003e\u003c\/span\u003eThe 4-in-1 Alginate\u003cbr\u003eRetarder\/Bonder\/Softener\/Cleaner\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\r\n\u003cp\u003eA REAL STUDIO BREAKTHROUGH - ArtMolds has created the 3-in-1 alginate control formula . . . a must have for anyone who uses alginate. This is an indispensable multi-use formula for all brands of alginate. \u003cbr\u003eUSE AS A . . .\u003c\/p\u003e\r\n\u003cp\u003eRETARDER . . . increase set time up to 5 or more minutes. \u003cbr\u003eBONDER . . . bond a set layer to a new layer stronger than any other method available. \u003cbr\u003eSOFTENER . . . soften freshly set alginate to allow application of fiber to the surface to firmly hold a mother mold.\u003cbr\u003eCLEANER . . . Removes dried alginate from clothes\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eRETARDER\u003c\/strong\u003e. Algislo is the alginate-retarding agent created especially for artists, special effects, restorers, taxidermists, sculptors, mold makers and anyone who wished they had more control over their alginate product. \u003cbr\u003e   Algislo is the answer to all alginate users! To slow set time: in 16 ounces (480 ml) of water simply substitute approximately ½ ounces (15 ml.) of your water mix to ½ ounces (15 ml.) of Algislo for each minute of additional set time desired, for up to five and even more minutes. OR for every pound of water remove 1\/2 oz. (15 ml.) of Algislo to add one minute (approximately) of set time.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eBONDER.\u003c\/strong\u003e For best results surface to be bonded should be recently set. The longer the set, the poorer the bond. Thoroughly spray the surface of the alginate and apply your new alginate layer. We recommend spraying the surface rather than the use of a paint brush for more even results and to avoid pulling on a tacky area.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eSURFACE SOFTENER.\u003c\/strong\u003e When applied to a recently set surface, Algislo will soften it sufficiently to allow the application of fiber to secure a mother (shell) mold. For best results we recommend spraying the surface before it sets. This will act as a surface set retarder giving the lifecaster ample time to apply fiber on the surface.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eCLEANER\u003c\/strong\u003e. Wil help remove driead alginates from clothes and cloth. Spray on and wait fotr three minutes. Then scrub with a tooth brush to remove. If residual material remains. Repeat the process until all traces are removed\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/www.artmolds.com\/pub\/media\/blfa_files\/SDS_AlgiSlo_1.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSDS\u003c\/a\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e","brand":"ArtMolds","offers":[{"title":"Default","offer_id":48014540833083,"sku":"SM200510R","price":24.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/algislo-1000px.jpg?v=1710973437"},{"product_id":"artmolds-hollywood-impressions-1lb","title":"Hollywood Impressions 1lb Alginate","description":"\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: medium;\"\u003eThe Healthiest -- Most Environmental Friendly Mold Making Impression Material Available HIGHLIGHTS: 2-3 Minute Set Time Health Friendly – Silica-free and dustless, too!\u003c\/span\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: small;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: medium;\"\u003eEnvironmentally GREEN\u003c\/span\u003e\u003c\/strong\u003e – with all food grade ingredients Highest Yielding Formula – greatest value ounce-for-ounce Delayed Shrinkage – extends casting time requirements up 24-hrs. Ultra Smooth and Creamy – reduces mold voids due to air bubbles Stays In Place – improved surface tension reduces runs Gradual Set Time – eliminates a setting surprise Surface Enhanced – improved gypsum and fast resin compatibilty Approved for ASTM D-4236 Labeling – independently tested It is the healthiest, earth friendliest, most shrink resistant hydrocolloid impression material of its kind to date and . . . and provides 50-percent greater yields over traditional blends. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: small;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: medium;\"\u003eSilica Free\u003c\/span\u003e\u003c\/strong\u003e The new formula is both crystalline silica-free (OSHA recommends elimination of this potential hazard in the work place) and dust free eliminating inhalation hazards during dispensing. It is also fluoride free and ‘lead free’ which other formulas cannot represent. With all of these safety improvements it is by far the healthiest formula to use. The new filler along with the other food grade components enriches the soil when discarded. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: medium;\"\u003eUP 50% Higher Yield Over Other Brands \u003c\/span\u003e\u003c\/strong\u003e\u003cspan style=\"font-size: small;\"\u003eThis earth friendly product now makes disposing of used material not only a simple matter, but CO2 reducing, too. It actually helps in the fight against global warming and promotes clean air by nurturing carbon dioxide eliminating and oxygen producing plants. Yet higher quality doesn’t mean higher cost. Intriguingly, the new formula holds more water in suspension than the old mixes which creates greater yields of impression material per pound. This means each pound of the improved mold powder when combined with water yields up to 20-50-percent more impression material compared to current formulations. \u003c\/span\u003e\u003cspan style=\"font-size: small;\"\u003eAs an example with its 7-to-1 mix ratio by weight (water to powder) it yields twice as much impression material as brands that offer only 3-to-1 mix ratios. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: medium;\"\u003eDelayed Shrinkage \u003c\/span\u003e\u003c\/strong\u003e\u003cspan style=\"font-size: small;\"\u003eBut, that is not all. The new discovery not only improves mold detail without the use of more toxic fluoride salts, but its innovative ingredients contain a cell structure that delays mold shrinkage by enabling it to hold water far longer than similar impression materials. With delayed shrinkage casting can be postponed to a more convenient time while still retaining all the original detail that would normally be lost with current blends. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: medium;\"\u003eCan Be Garden Composted When Finished \u003c\/span\u003e\u003c\/strong\u003e\u003cspan style=\"font-size: small;\"\u003eWhen your mold is no longer needed just crumble it up and add it to the soil or the compost pile as a supplement to foster plant growth. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: medium;\"\u003eUltra Smooth Mix \u003c\/span\u003e\u003c\/strong\u003e\u003cspan style=\"font-size: small;\"\u003eMore importantly a high quality mold is assured every time through an improved manufacturing process that guarantees an ultra smooth and creamy, lump-free consistency. (Make certain your water is not hard or you will get a lumpy mix) The advanced formula has been evaluated by Info Tox. International, Inc., a toxicology, occupational safety and environmental health testing lab and consulting company based in Riverside, California and has been certified: ‘Approved Conforming to ASTM D-4236.’ MIXING AND CURING: \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: medium;\"\u003eHow to Mix \u003c\/span\u003e\u003c\/strong\u003e\u003cspan style=\"font-size: small;\"\u003eWeigh or measure proper amounts of MoldGel SILFREE Regular Set powder and 80° F. \/ 27° C water. Mix together rapidly, but avoid whipping in air. A turbo mixer on a variable speed drill is recommended. Thicken with more powder, thin with more water. Apply to surface with a flowing motion pushing air out ahead of material. Optional liquid retarder may be premixed with water to extend working time.  SILFREEwill not bond to itself unless the previous mix is not completely set. Thus, adhere two layers so that more than one mix should be made by mixing a series of mixes within five minutes of one another. Bonding can be accomplished on on a gelled surface, by spraying or painting Algislo on the surface of the mold material. You can also embed fiber into SILFREE to secure the shell. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: medium;\"\u003eThree Great Formulas \u003c\/span\u003e\u003c\/strong\u003e\u003cspan style=\"font-size: small;\"\u003eAs soon as SILFREEis firm, mix and apply a mother mold using plaster bandages or cheesecloth and diluted plaster. When plaster shell is set, remove the mold. It is recommended that a positive casting be made within 12-hours, as SilFree will begin to loose detail as it dries. ArtMolds offers three variations to its new formula . . . Hollywood Impressions® SILFREE with a 2-3 minute set time in 80-degree F. (27-degrees C.) water. It is tinted green and an attractive lime scented. MoldGel® SILFREE Regular Set has a 4-5 minute set time with an orange tint and a pleasant orange fragrance. Then there is MoldGel® SILFREE SloSet with a 7-8 minute set time and is blue tinted with a peppermint candy scent. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: small;\"\u003e\u003ca href=\"https:\/\/www.artmolds.com\/pub\/media\/blfa_files\/SDS_ArtMolds_Impression_Material-SILFREE-US-04_20_2015.pdf\" rel=\"noopener\" target=\"_blank\"\u003eSDS\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"ArtMolds","offers":[{"title":"Default","offer_id":48014576714043,"sku":"AM1D0101W","price":18.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/hollywood-impressions-1000px.jpg?v=1710974444"},{"product_id":"artmolds-moldez-alginate-hair-release","title":"MoldEZ Alginate Hair Release","description":"\u003cp\u003eMoldEZ Hair and Mold Release Water soluble! This gem of a product is a \"must have\" for every lifecaster Avoid the hassle and win your model over with MoldEZ. Use this water-based release cream instead of petroleum jelly on the skin and all body hair. Washes out the first time unlike petroleum-based jellies. Work a generous amount into the hair and then comb. You can cast an entire head of hair. Also great to fill pin holes in your MoldGel and alginate molds prior to casting. Another handy idea - use it to hold your MoldGel or alginate mold to the mother mold around the edges. Hypoallergenic, all natural ingredients. Smells great, too.\u003c\/p\u003e","brand":"ArtMolds","offers":[{"title":"Default","offer_id":48014589985083,"sku":"SM300101W","price":18.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/moldez-1000px.jpg?v=1710974836"},{"product_id":"facegel-590-25lb-unit","title":"Facegel 590 2.5lb Unit Alginate","description":"\u003cp\u003eSpecifically designed for doing face molds, FaceGel™ is also ideal for heads and other medium sized Layup Molds- where alginate is placed onto a vertical surface. FaceGel™ (590) has an extra thickener in it that makes it go on more like cake frosting rather than pancake batter. Less waste also equals more economy.\u003c\/p\u003e\r\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shoplightspeed.com\/shops\/606431\/files\/52157827\/590specs.png\" alt=\"\" width=\"954\" height=\"239\"\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eMixes thicker than normal alginates\u003c\/li\u003e\r\n\u003cli\u003eSets in about 5 minutes when using 90°F water\u003c\/li\u003e\r\n\u003cli\u003eDoesn't drip like ordinary alginates- stays where you put it\u003c\/li\u003e\r\n\u003cli\u003eSets gradually from the inside out- ideal for face castings\u003c\/li\u003e\r\n\u003cli\u003eSets very flexibly and tough\u003c\/li\u003e\r\n\u003cli\u003eLoses water very slowly to evaporation\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003eAvailable in 1, 2.5, 5, 25 and 50 pound bags.\u003c\/p\u003e\r\n\u003cp\u003eApproximate requirements:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eA face mold takes only 3-4 ounces of FaceGel™ (4-5 per pound)\u003c\/li\u003e\r\n\u003cli\u003eA half torso takes about .75 to 1 pound\u003c\/li\u003e\r\n\u003cli\u003eA head casting takes about 1.5 pounds\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/msds\/files\/1915_1%20ACCU-CAST%20ACCUCAST%20590_SDS.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSDS\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/tb\/files\/FaceGel_590_TB.pdf\" target=\"_blank\" rel=\"noopener\"\u003eTDS\u003c\/a\u003e\u003c\/p\u003e","brand":"Accu-Cast","offers":[{"title":"Default","offer_id":48015298036027,"sku":"10029814","price":37.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/facegel590-combined-bag-1400x1050-74950-62719-1178.jpg?v=1710983933"},{"product_id":"handgel-570-5lb-unit","title":"Handgel 570 5lb Unit Alginate","description":"\u003cp\u003eHandGel is our \"go to\" alginate for larger bucket molds like Adult Hand Casting, Family Hand Casting and Foot Casting. Nice long setting time gives you plenty of time to mix and get the hands in place- even for novices.\u003c\/p\u003e\r\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shoplightspeed.com\/shops\/606431\/files\/52157878\/570specs.png\" alt=\"\" width=\"958\" height=\"240\"\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eMixes smooth, creamy and pourable\u003c\/li\u003e\r\n\u003cli\u003eSets in about 5:30 using 70°F water\u003c\/li\u003e\r\n\u003cli\u003eSets \"snappy\"- goes from liquid to solid quickly\u003c\/li\u003e\r\n\u003cli\u003eModerately high tear strength but easy to de-mold\u003c\/li\u003e\r\n\u003cli\u003eFirm but flexible set\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003eAvailable in 5, 25 and 50 pound bags.  Approx. Requirements:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eAdult Hand Cast for 1 takes about 1.5 pounds in a 4 Quart bucket\u003c\/li\u003e\r\n\u003cli\u003eAdult Hand Cast for 2 takes about 1.25 pounds in a 4 Quart bucket\u003c\/li\u003e\r\n\u003cli\u003eFamily Hand Cast for 4 takes about 2.5 pounds in a 8 Quart bucket\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/msds\/files\/1901_ACCUCAST%20570-PGV;%20ACCUCAST%20880-B;%20ACCUCAST%20GENESIS%20V;%20%20ACCUCAST%20380-WHITE;%20ACCUCAST%20390-S2;%20ACCUCAST%20590-IBG;%20ACCUCAST%20370-S.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSDS\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/tb\/files\/HandGel_570_TB.pdf\" target=\"_blank\" rel=\"noopener\"\u003eTDS\u003c\/a\u003e\u003c\/p\u003e","brand":"Accu-Cast","offers":[{"title":"Default","offer_id":48015298068795,"sku":"120367","price":59.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/handgel570-combined-bag-1400x1050-69182-30034-5098.jpg?v=1710983936"},{"product_id":"baby-child-hand-casting-kit","title":"Baby \/ Child Hand Casting Kit Alginate","description":"\u003cp\u003eComplete Baby \/ Child Hand Casting Kit is an easy and fun way to learn this art form. Recommended for hand casting of children up to about 7 years old.\u003c\/p\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" href=\"https:\/\/www.smooth-on.com\/assets\/accu-cast\/instructions\/Baby-Child-Hand-Cast-Kit-Instructions.pdf\" target=\"_blank\"\u003eINSTRUCTIONS\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eThe kit is complete. \u003cstrong\u003eEXCLUSIVE BONUS:\u003c\/strong\u003e It even includes a second bag of alginate- just in case the first mold doesn't come out so well.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKit Contains:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTwo bags of our BabyGel 2 (380) Alginate- 6 oz each\u003c\/li\u003e\n\u003cli\u003eOne bag of our LiquiStone Casting Stone- 18 oz\u003c\/li\u003e\n\u003cli\u003eOne 32 oz molding bucket\u003c\/li\u003e\n\u003cli\u003eOne Thermometer\u003c\/li\u003e\n\u003cli\u003eOne small bag LiquiStone for fixing small problems with casting\u003c\/li\u003e\n\u003cli\u003eOne printed instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" href=\"https:\/\/www.smooth-on.com\/msds\/files\/1901_ACCUCAST%20570-PGV;%20ACCUCAST%20880-B;%20ACCUCAST%20GENESIS%20V;%20%20ACCUCAST%20380-WHITE;%20ACCUCAST%20390-S2;%20ACCUCAST%20590-IBG;%20ACCUCAST%20370-S.pdf\" target=\"_blank\"\u003eAlginate SDS\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" href=\"https:\/\/www.smooth-on.com\/msds\/files\/ACCU-CAST%20LIQUISTONE-REV.1.pdf\" target=\"_blank\"\u003eLiquistone SDS\u003c\/a\u003e\u003c\/p\u003e","brand":"Accu-Cast","offers":[{"title":"Default","offer_id":48015298953531,"sku":"10029687","price":22.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/baby-child-hand-casting-kit-1000x750.jpg?v=1710983957"},{"product_id":"family-hand-casting-kit","title":"Family Hand Casting Kit Alginate","description":"\u003cp\u003eThe Family Hand Casting Kit is just like the Adult Hand Casting Kit, but larger, to allow for more hands to be cast at once.\u003c\/p\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" href=\"https:\/\/www.smooth-on.com\/assets\/accu-cast\/instructions\/Familykit_Single_pages.pdf\" target=\"_blank\"\u003eINSTRUCTIONS\u003c\/a\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe reusable molding bucket is bigger (8 quarts vs. 4 quarts)\u003c\/li\u003e\n\u003cli\u003eKit contains twice as much alginate (our HandGel™ 570 formula)\u003c\/li\u003e\n\u003cli\u003eKit contains twice as much LiquiStone™ casting cement\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis kit can cast up to 4 adult hands or some similar arrangement of adult and children's hands.\u003c\/p\u003e\n\u003cp\u003eThe final casting is hard, white and very durable. It can be painted or finished in many ways using standard paints. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e The kit comes with two Mix-In-The-Bag alginates so we recommend having two people mix the alginate at the same time.\u003c\/p\u003e\n\u003cp\u003eKit Contains:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAlginate Mix-In-The-Bag: 2 x 1.5 pounds HandGel™ 570 Alginate\u003c\/li\u003e\n\u003cli\u003eLiquiStone™ Mix-In-The-Bag: 2 x 3.5 pounds\u003c\/li\u003e\n\u003cli\u003eMolding Bucket: 8 Quart size\u003c\/li\u003e\n\u003cli\u003eSmall bag of clay for filling under long fingernails\u003c\/li\u003e\n\u003cli\u003eSmall bag of LiquiStone™ for repair use\u003c\/li\u003e\n\u003cli\u003ePrinted Instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" href=\"https:\/\/www.smooth-on.com\/msds\/files\/1901_ACCUCAST%20570-PGV;%20ACCUCAST%20880-B;%20ACCUCAST%20GENESIS%20V;%20%20ACCUCAST%20380-WHITE;%20ACCUCAST%20390-S2;%20ACCUCAST%20590-IBG;%20ACCUCAST%20370-S.pdf\" target=\"_blank\"\u003eAlginate SDS\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" href=\"https:\/\/www.smooth-on.com\/msds\/files\/ACCU-CAST%20LIQUISTONE-REV.1.pdf\" target=\"_blank\"\u003eLiquistone SDS\u003c\/a\u003e\u003c\/p\u003e","brand":"Accu-Cast","offers":[{"title":"Default","offer_id":48015301476667,"sku":"10029685","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/family-hand-casting-kit-1000x750-w-casting.jpg?v=1710983980"},{"product_id":"face-casting-kit","title":"Face Casting Kit Alginate","description":"\u003cp\u003e \u003c\/p\u003e\n\u003cdiv aria-hidden=\"false\" data-role=\"content\" aria-labelledby=\"tab-label-description\" role=\"tabpanel\" class=\"data item content\" id=\"description\"\u003e\n\u003cdiv data-decoded=\"true\" data-element=\"main\" data-appearance=\"default\" data-content-type=\"html\"\u003e\n\u003cp\u003eIncluded in the face casting kit are the very same materials used by professional lifecasters. Recommended for adults and children over the age of about 8 years.\u003c\/p\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" href=\"https:\/\/www.smooth-on.com\/assets\/accu-cast\/instructions\/Face-Casting-Kit-Instructions.pdf\" target=\"_blank\"\u003eINSTRUCTIONS\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKit includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTwo 4 ounce bags of 590-PGV alginate\u003c\/li\u003e\n\u003cli\u003eTwo 0.75 pound bags of LiquiStone™ Flowable Gypsum Cement\u003c\/li\u003e\n\u003cli\u003eTwo 5 yard rolls of gypsum bandage\u003c\/li\u003e\n\u003cli\u003eThermometer\u003c\/li\u003e\n\u003cli\u003eTwo .25lb bags of Liquistone™ (for repairs)\u003c\/li\u003e\n\u003cli\u003eMixing stick\u003c\/li\u003e\n\u003cli\u003eMixing cups\u003c\/li\u003e\n\u003cli\u003eMounting hook\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" href=\"https:\/\/www.smooth-on.com\/msds\/files\/1901_ACCUCAST%20570-PGV;%20ACCUCAST%20880-B;%20ACCUCAST%20GENESIS%20V;%20%20ACCUCAST%20380-WHITE;%20ACCUCAST%20390-S2;%20ACCUCAST%20590-IBG;%20ACCUCAST%20370-S.pdf\" target=\"_blank\"\u003eAlginate SDS\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" href=\"https:\/\/www.smooth-on.com\/msds\/files\/ACCU-CAST%20LIQUISTONE-REV.1.pdf\" target=\"_blank\"\u003eLiquistone SDS\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Accu-Cast","offers":[{"title":"Default","offer_id":48015303278907,"sku":"120383","price":39.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/face-casting-kit-1000x750-w-casting.jpg?v=1710983988"},{"product_id":"full-torso-pregnancy-casting-kit","title":"Full Torso \/ Pregnancy Casting Kit Alginate","description":"\u003cp\u003eThis kit comes with everything you'll need to make a torso casting except for water and a model:\u003c\/p\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" href=\"https:\/\/www.smooth-on.com\/assets\/accu-cast\/instructions\/Torsokit_Single_pages.pdf\" target=\"_blank\"\u003eINSTRUCTIONS\u003c\/a\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOne bag of BodyGel (880) Alginate- 1.6 pounds\u003c\/li\u003e\n\u003cli\u003eTwo bags of LiquiStone Casting Material- 5 pounds each\u003c\/li\u003e\n\u003cli\u003e7 rolls of 4x5 plaster bandages\u003c\/li\u003e\n\u003cli\u003eMetal hook for hanging finished sculpture\u003c\/li\u003e\n\u003cli\u003ePlastic smock for protecting clothes\u003c\/li\u003e\n\u003cli\u003eComplete illustrated instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIt is best to have an assistant working with you when creating a mold of this size.\u003c\/p\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" href=\"https:\/\/www.smooth-on.com\/msds\/files\/1901_ACCUCAST%20570-PGV;%20ACCUCAST%20880-B;%20ACCUCAST%20GENESIS%20V;%20%20ACCUCAST%20380-WHITE;%20ACCUCAST%20390-S2;%20ACCUCAST%20590-IBG;%20ACCUCAST%20370-S.pdf\" target=\"_blank\"\u003eAlginate SDS\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" href=\"https:\/\/www.smooth-on.com\/msds\/files\/ACCU-CAST%20LIQUISTONE-REV.1.pdf\" target=\"_blank\"\u003eLiquistone SDS\u003c\/a\u003e\u003c\/p\u003e","brand":"Accu-Cast","offers":[{"title":"Default","offer_id":48015303934267,"sku":"120387","price":118.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/torso1.jpg?v=1710983995"},{"product_id":"foot-casting-kit","title":"Foot Casting Kit Alginate","description":"\u003cp\u003eThis casting kit is perfect for making custom shoes or creating a 3D stone sculpture of a foot.\u003c\/p\u003e\n\u003cp\u003eThe procedure is simple enough you could do it all by yourself. The Mix-In-The-Bag technique is used, so cleanup is very easy.\u003c\/p\u003e\n\u003cp\u003eWith this kit you can make individual molds and castings of one adult sized foot - up to about size 12.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/assets\/accu-cast\/instructions\/Footkit_Single_pages.pdf\" rel=\"noopener\" target=\"_blank\"\u003eINSTRUCTIONS\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKit includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTwo 1lb bags of 570-PGV alginate\u003c\/li\u003e\n\u003cli\u003eOne 3.5lb bag of LiquiStone™ Flowable Gypsum Cement\u003c\/li\u003e\n\u003cli\u003eRectangular Molding Bucket\u003c\/li\u003e\n\u003cli\u003eThermometer\u003c\/li\u003e\n\u003cli\u003eBlack Plastic Dropcloth\u003c\/li\u003e\n\u003cli\u003eOne .25lb bag of Liquistone™ (for repairs)\u003c\/li\u003e\n\u003cli\u003eMixing stick\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eUsed by sculptors, prosthetists and custom shoemakers.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/msds\/files\/1901_ACCUCAST%20570-PGV;%20ACCUCAST%20880-B;%20ACCUCAST%20GENESIS%20V;%20%20ACCUCAST%20380-WHITE;%20ACCUCAST%20390-S2;%20ACCUCAST%20590-IBG;%20ACCUCAST%20370-S.pdf\" rel=\"noopener\" target=\"_blank\"\u003eAlginate SDS\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/msds\/files\/ACCU-CAST%20LIQUISTONE-REV.1.pdf\" rel=\"noopener\" target=\"_blank\"\u003eLiquistone SDS\u003c\/a\u003e\u003c\/p\u003e","brand":"Accu-Cast","offers":[{"title":"Default","offer_id":48015305670971,"sku":"10029679","price":53.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/foot-casting-kit-1000x750-w-casting2.jpg?v=1734204458"},{"product_id":"alja-safe","title":"Alja-Safe™","description":"\u003cp\u003eSafe to use \u003cstrong\u003eAlja-Safe™\u003c\/strong\u003e is the world’s first alginate molding powder that does not contain crystalline silica (a known carcinogen). \u003cstrong\u003eAlja-Safe™\u003c\/strong\u003e is perfect for making single-use molds of the face, hands and other body parts. It captures detail better than other alginates, giving you a more accurate reproduction of your original.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCertified Skin Safe\u003c\/strong\u003e - Material is skin safe and certified by an independent laboratory.\u003c\/p\u003e\n\u003cp\u003e\u003cimg height=\"335\" width=\"402\" alt=\"\" src=\"https:\/\/cdn.shoplightspeed.com\/shops\/606431\/files\/50849932\/aljasafespecs.png\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg height=\"235\" width=\"953\" alt=\"\" src=\"https:\/\/cdn.shoplightspeed.com\/shops\/606431\/files\/50849964\/aljasafecalc.png\"\u003e\u003c\/p\u003e\n\u003cp\u003eFeatures\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAlja-Safe™\u003c\/strong\u003e is easy to use and cures quickly. It reproduces fine detail and makes an excellent temporary mold – good for one or two reproductions of any body part. You can then cast plaster, platinum cure silicone rubber or \u003cstrong\u003eSmooth-Cast™ 300Q\u003c\/strong\u003e ultra-fast urethane resin into the mold to make a reproduction.\u003c\/p\u003e\n\u003cp\u003eFor making re-usable molds of any body part, use \u003cstrong\u003eBody Double™\u003c\/strong\u003e silicone rubber.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT: This product has not been tested and should not be used for dental applications. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eStarter Kit comes with:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e0.85 lb. of \u003cstrong\u003eAlja-Safe™\u003c\/strong\u003e Molding Gel\u003c\/li\u003e\n\u003cli\u003e2 lbs. Casting Plaster\u003c\/li\u003e\n\u003cli\u003eQuick Start Guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eInstructions\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003ePreparation\u003c\/strong\u003e\u003c\/em\u003e - Store and use \u003cstrong\u003eAlja-Safe™\u003c\/strong\u003e in a dry environment at room temperature. \u003cstrong\u003eAlja-Safe™\u003c\/strong\u003e powder may get warm in storage\/shipping during the summer months which will cause the powder\/water mixture to set too fast. To remedy, store \u003cstrong\u003eAlja-Safe™\u003c\/strong\u003e in a cool area (60°C - 70°F or 15°C - 31°C) for 24 hours before using. \u003cstrong\u003eAlja-Safe™\u003c\/strong\u003e has a limited shelf life and should be used as soon as possible. Do not allow moisture to come into contact with unused \u003cstrong\u003eAlja-Safe™\u003c\/strong\u003e. Use only with adequate ventilation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePractice:\u003c\/strong\u003e \u003cstrong\u003eMake a mold of your thumb\u003c\/strong\u003e – make a mold of something small before going on to larger models. \u003cem\u003e\u003cstrong\u003eYou’ll gain a lot of experience with a small test.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eApplying A Release Agent\u003c\/em\u003e \u003c\/strong\u003e– \u003cstrong\u003eAlja-Safe™\u003c\/strong\u003e will not stick to most surfaces. When making a mold of the head, a release preparation is recommended to prevent mechanical lock to the hair. CHOLESTEROL Brand Hair Conditioner (available at most pharmacies) can be applied to hair-covered areas prior to applying \u003cstrong\u003eAlja-Safe™\u003c\/strong\u003e. It can be washed out of the hair easily after use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eMeasuring\u003c\/em\u003e \u003c\/strong\u003e– \u003cstrong\u003eAlja-Safe™\u003c\/strong\u003e is mixed 1 part water to 1 part powder by volume (1 cup + 1 cup, for example). You can vary the water level somewhat to change consistency of the mixture. Less water will make \u003cstrong\u003eAlja-Safe™\u003c\/strong\u003e thicker. More water will make the mixture thinner and easier to pour. \u003cstrong\u003eBe careful…\u003c\/strong\u003etoo much water will may result in the mixture not curing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eWater Quality\u003c\/em\u003e \u003c\/strong\u003e– Water that has a high mineral content (calcium, phosphate, etc.) may cause any alginate to become “lumpy” or not set properly. A small-scale test is recommended prior to mixing large amounts. If water quality is in question, use distilled water heated to the correct temperature using a stove top or microwave oven if needed. Check water temperature using a thermometer.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eTemperature Of The Water\u003c\/strong\u003e\u003c\/em\u003e - At 80° F \/ 27° C, Alja-Safe™ will have a working time of 5 minutes and a demold time of 8 minutes. Warmer water will cause the material to cure faster (less working time). Colder water will give a longer working time and slower demold time.\u003cstrong\u003e For best results, sift Alja-Safe™ powder into water and mix as directed.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eMixing\u003c\/em\u003e \u003c\/strong\u003e– \u003cstrong\u003eAlja-Safe™\u003c\/strong\u003e can be hand mixed, but best results will be obtained using a power drill with a mixer attachment. Attach a Jiffy Mixer or Turbine Mixer to a power drill and mix for one minute (depending on volume) to a gel-like consistency – smooth without any powder lumps. Jiffy mixers are available at many hardware stores. Turbine Mixers will yield the best mix and are available from Smooth-On or your Smooth-On distributor.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAlja-Safe™ can be poured around an object or applied to vertical surfaces.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003ePouring Around An Object\u003c\/strong\u003e\u003c\/em\u003e - Once mixed, \u003cstrong\u003eAlja-Safe™\u003c\/strong\u003e can be poured around the hand, foot, fingers or other model in a fixed position inside a container. Suspend the model just above the bottom of the container and have at least ½\" (1.27 cm) space between the model and the side walls of the container.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eFor Best Results:\u003c\/strong\u003e\u003c\/em\u003e Apply a thin coating of \u003cstrong\u003eAlja-Safe™\u003c\/strong\u003e to the surface of the model by smoothing a small amount of material on by hand. Pour\u003cstrong\u003e Alja-Safe™\u003c\/strong\u003e into the container at the lowest point and let the material rise around the model. Make sure your model has a good clearance distance from the bottom and sides of the container. Keep your model still until the \u003cstrong\u003eAlja-Safe™\u003c\/strong\u003e sets up. You will know the \u003cstrong\u003eAlja-Safe™\u003c\/strong\u003e has set when it is firm and no longer gel-like.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eFor Vertical Application\u003c\/strong\u003e\u003c\/em\u003e – You may want to experiment with the amount of water added to \u003cstrong\u003eAlja-Safe™\u003c\/strong\u003e to find a thicker consistency that is right for vertical surface application. For example, some customers mix 1 part water to 1.5 parts \u003cstrong\u003eAlja-Safe™\u003c\/strong\u003e. Work \u003cstrong\u003eAlja-Safe™\u003c\/strong\u003e into model detail with your hands and let cure.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eApplying A Support Shell\u003c\/strong\u003e \u003c\/em\u003e- Once the alginate cures, a support shell will be necessary to support the alginate mold. \u003cstrong\u003eGypsona \u003c\/strong\u003ebandages are ideal for this purpose, and are available from Smooth-On or your Smooth-On distributor.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eCasting Into The Mold\u003c\/em\u003e - \u003c\/strong\u003eAll alginate molds will deteriorate quickly. It is recommended that you cast into the mold within 4 hours following demold. Materials commonly cast into alginates include plaster, wax, clay and very fast urethane resins (such as \u003cstrong\u003eSmooth-Cast 300Q\u003c\/strong\u003e). \u003cstrong\u003eFor Soft \"Skin-Like\" Castings\u003c\/strong\u003e – You can cast \u003cstrong\u003eDragon Skin 10 FAST\u003c\/strong\u003e soft silicone rubber into \u003cstrong\u003eAlja-Safe™\u003c\/strong\u003e molds to make realistic hands, limbs, etc.\u003c\/p\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" href=\"https:\/\/www.smooth-on.com\/msds\/files\/Alja-Safe.pdf\" target=\"_blank\"\u003eSDS\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" href=\"https:\/\/www.smooth-on.com\/assets\/pdf\/ALJASAFE_How_To_Guide.pdf\" target=\"_blank\"\u003eQuickstart Guide\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" href=\"https:\/\/www.smooth-on.com\/tb\/files\/SkinSafeDocs\/AljasafeSkinSafeCertificate13018.pdf\" target=\"_blank\"\u003eSkin Safety Certification\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Smooth-On","offers":[{"title":"3lb Box (3 lbs. \/ 1.36 kg.)","offer_id":48015671099707,"sku":"86060A","price":38.99,"currency_code":"USD","in_stock":false},{"title":"20lb Box (20 lbs. \/ 9.07 kg.)","offer_id":48015671132475,"sku":"86070A","price":200.99,"currency_code":"USD","in_stock":true},{"title":"50lb Box (50 lbs. \/ 22.68 kg.)","offer_id":48015671165243,"sku":"86010A","price":472.99,"currency_code":"USD","in_stock":false},{"title":"Lifecasting Starter Kit (3 lbs. \/ 1.36 kg.)","offer_id":48015671198011,"sku":"86022","price":30.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/Alja-Safe-combo-1400x1050.jpg?v=1748698118"},{"product_id":"ecoflex-00-35-fast","title":"Ecoflex™ 00-35 FAST","description":"\u003cp\u003e\u003cstrong\u003eEcoflex™ 00-35 FAST\u003c\/strong\u003e is a soft, fast cure platinum-catalyzed silicone that is versatile and easy to use. Parts A and B are mixed 1:1 by weight or volume, pot life is about 2.5 minutes and rubber cures in about 5 minutes at room temperature with negligible shrinkage. Low viscosity ensures easy mixing and pouring. Rubber cures without \"tacky\" surface, is very soft, very strong and very \"stretchy, stretching many times its original size. \u003cstrong\u003eEcoFlex™ 00-35 FAST\u003c\/strong\u003e is off-white translucent and can be color pigmented using \u003cstrong\u003eSilc Pig™\u003c\/strong\u003e silicone color pigments.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shoplightspeed.com\/shops\/606431\/files\/50868754\/ecoflex0035specs.png\" alt=\"\" width=\"406\" height=\"703\"\u003e\u003c\/p\u003e\n\u003cp\u003eFeatures\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCertified Skin Safe\u003c\/strong\u003e - Material is skin safe and certified by an independent laboratory. Liquid \u003cstrong\u003eEcoflex™ 00-35 FAST will cure against the skin \u003c\/strong\u003eand can be used for \u003cstrong\u003elife casting \u003c\/strong\u003eapplications to make rubber molds that cure quickly and are good for casting wax, resins, etc. \u003cstrong\u003eEcoflex™ 00-35 FAST \u003c\/strong\u003ecan also be used for a variety of skin safe applications including making fast skin safe appliances for special effects and cosplay, cushioning for orthopedic and orthotic devices worn on the body and much more.\u003cstrong\u003eEcoflex™ 00-35 FAST\u003c\/strong\u003e can also be used to make fast cure rubber molds with high elongation for casting a variety of materials.\u003c\/p\u003e\n\u003cp\u003eInstructions\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eSafety\u003c\/em\u003e \u003c\/strong\u003e– Use in a properly ventilated area (“room size” ventilation). Wear safety glasses, long sleeves and rubber gloves to minimize contamination risk. Wear vinyl gloves only. Latex gloves will inhibit the cure of the rubber.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStore and use material at room temperature (73°F\/23°C).\u003c\/strong\u003e Warmer temperatures will drastically reduce working time and cure time. Storing material at warmer temperatures will also reduce the usable shelf life of unused material. These products have a limited shelf life and should be used as soon as possible.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eCure Inhibition\u003c\/strong\u003e\u003c\/em\u003e – Addition-cure silicone rubber may be inhibited by certain contaminants in or on the pattern to be molded resulting in tackiness at the pattern interface or a total lack of cure throughout the mold. Latex, tin-cure silicone, sulfur clays, certain wood surfaces, newly cast polyester, epoxy or urethane rubber may cause inhibition. If compatibility between the rubber and the surface is a concern, a small-scale test is recommended. Apply a small amount of rubber onto a non-critical area of the pattern. Inhibition has occurred if the rubber is gummy or uncured after the recommended cure time has passed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBecause no two applications are quite the same, a small test application to determine suitability for your project is recommended if performance of this material is in question.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTo prevent inhibition, one or more coatings of a clear acrylic lacquer applied to the model surface is usually effective. Allow any sealer to thoroughly dry before applying rubber. Note: Even with a sealer, platinum silicones will not work with modeling clays containing heavy amounts of sulfur. Do a small scale test for compatibility before using on your project.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eApplying A Release Agent\u003c\/strong\u003e\u003c\/em\u003e - Although not usually necessary, a release agent will make demolding easier when pouring into or over most surfaces. \u003cstrong\u003eEase Release™ 200\u003c\/strong\u003e is a proven release agent for use with silicone rubber. Mann Ease Release™ products are available from Smooth-On or your Smooth-On distributor.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eIMPORTANT:\u003c\/strong\u003e\u003c\/em\u003e To ensure thorough coverage, lightly brush the release agent with a soft brush over all surfaces of the model. Follow with a light mist coating and let the release agent dry for 30 minutes.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eIf Applying To The Skin\u003c\/strong\u003e -\u003c\/em\u003e \u003cstrong\u003eBody Double™ Release Cream\u003c\/strong\u003e (available from Smooth-On) is a non-toxic skin conditioner that will aid in releasing \u003cstrong\u003eEcoflex™ 00-35 FAST \u003c\/strong\u003emold rubber from skin surfaces with or without hair. It washes off with soap and water. It is highly concentrated, so a little goes a long way. To use, wash intended body section with soap and water and dry thoroughly. Liberally apply \u003cstrong\u003eBody Double™ Release Cream\u003c\/strong\u003e to all skin surfaces (bare and hair covered) that will contact mold rubber.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTake special care to aggressively massage and work the cream into and over body hair.\u003c\/strong\u003e Body hair not thoroughly coated with release cream will become encapsulated and stuck in rubber which will be difficult \u0026amp; painful to remove\u003c\/p\u003e\n\u003cp\u003eIf there is any question about the effectiveness of a sealer\/release agent combination, a small-scale test should be made on an identical surface for trial.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eMEASURING \u0026amp; MIXING -\u003c\/em\u003e \u003c\/strong\u003eBefore you begin, pre-mix Part B thoroughly. After dispensing required amounts of Parts A and B into mixing container (1A:1B by volume or weight), mix thoroughly for 90 seconds making sure that you scrape the sides and bottom of the mixing container several times. This material sets up quickly - do not delay between mixing and pouring.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003ePOURING - \u003c\/strong\u003e\u003c\/em\u003eFor best results, pour your mixture in a single spot at the lowest point of the containment field. If making a mold, let the rubber seek its level up and over the model. \u003cstrong\u003eA uniform flow will help minimize entrapped air\u003c\/strong\u003e. The liquid rubber should level off at least 1\/2” (1.3 cm) over the highest point of the model surface.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eCURING \/ POST CURING -\u003c\/strong\u003e\u003c\/em\u003e Allow rubber to cure as prescribed at room temperature (73°F\/23°C) before demolding. Do not cure rubber where temperature is less than 65°F\/18°C. \u003cstrong\u003eOptional:\u003c\/strong\u003e Post curing the mold will aid in quickly attaining maximum physical and performance properties. After curing at room temperature, expose the rubber to 176°F\/80°C for 2 hours and 212°F\/100°C for one hour. Allow mold to cool to room temperature before using. \u003cstrong\u003eImportant; \u003c\/strong\u003eRubber will yellow over time naturally. Heating the rubber will cause the rubber to yellow more quickly.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eThinning Ecoflex™ 00-35 FAST\u003c\/strong\u003e\u003c\/em\u003e - Smooth-On’s \u003cstrong\u003eSilicone Thinner™\u003c\/strong\u003e will lower the viscosity of \u003cstrong\u003eEcoflex™ 00-35 FAST \u003c\/strong\u003efor easier pouring and vacuum degassing. A disadvantage is that ultimate tear and tensile are reduced in proportion to the amount of \u003cstrong\u003eSilicone Thinner™\u003c\/strong\u003e added. It is not recommended to exceed 10% by weight of total system (A+B). See the \u003cstrong\u003eSilicone Thinner™\u003c\/strong\u003e technical bulletin (available from Smooth-On or your Smooth-On distributor) for full details.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThickening Ecoflex™ 00-35 FAST \u003c\/strong\u003e- \u003cstrong\u003eTHI-VEX™\u003c\/strong\u003e is made especially for thickening Smooth-On’s silicones for vertical surface application (making brush-on molds). Different viscosities can be attained by varying the amount of \u003cstrong\u003eTHI-VEX™\u003c\/strong\u003e. See the \u003cstrong\u003eTHI-VEX™\u003c\/strong\u003e technical bulletin (available from Smooth-On or your Smooth-On distributor) for full details.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/msds\/files\/BD_DS_Eco_Equ_EZB_EZS_Psy_MS_OOMOO_Reb_ST_SS_Soma_Sol_Sorta.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSDS\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/tb\/files\/SkinSafeDocs\/Ecoflex00-35SkinSafeCertificate11818.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSkin Safety Certification\u003c\/a\u003e\u003c\/p\u003e","brand":"Smooth-On","offers":[{"title":"Trial Kit (2 lbs. \/ 0.91 kg.)","offer_id":48015678177595,"sku":"74844","price":43.99,"currency_code":"USD","in_stock":false},{"title":"2 Gallon Kit (16 lbs. \/ 7.26 kg.)","offer_id":48015678210363,"sku":"74861","price":269.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/Ecoflex-00-35-combo-1400x1050.jpg?v=1748720356"},{"product_id":"body-double-release-cream","title":"Body Double™ Release Cream","description":"\u003cp\u003e\u003cstrong\u003eBody Double\u003c\/strong\u003e™\u003cstrong\u003e Release Cream\u003c\/strong\u003e is a non-toxic skin conditioner that will aid in releasing \u003cstrong\u003eBody Double™\u003c\/strong\u003e mold rubber from skin surfaces with or without hair. \u003cstrong\u003eBody Double™ Release Cream\u003c\/strong\u003e is skin safe and certified by an independent laboratory. It washes off with soap and water. It is highly concentrated, so a little goes a long way. To use, wash intended body section with soap and water and dry thoroughly. Liberally apply \u003cstrong\u003eBody Double™ Release Cream\u003c\/strong\u003e to all skin surfaces (bare and hair covered) that will contact \u003cstrong\u003eBody Double™\u003c\/strong\u003e mold rubber. Take special care to aggressively message and work the cream into and over body hair.\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/msds\/files\/Body_Double_Release_Cream.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSDS\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/tb\/files\/SkinSafeDocs\/BodyDoubleReleaseCreamSkinSafeCertification111919.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSkin Safety Certification\u003c\/a\u003e\u003c\/p\u003e","brand":"Smooth-On","offers":[{"title":"1oz (0.06 lbs. \/ 0.03 kg.)","offer_id":48015699149115,"sku":"84222","price":4.99,"currency_code":"USD","in_stock":false},{"title":"3.5oz (0.22 lbs. \/ 0.1 kg.)","offer_id":48015699181883,"sku":"84242","price":13.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/BodyDoubleCream-combo-1400x1050.jpg?v=1748698463"},{"product_id":"body-double-standard-set","title":"Body Double™ Standard Set","description":"\u003cp\u003e\u003cstrong\u003eBody Double™\u003c\/strong\u003e is a long lasting platinum-cure silicone rubber that can be applied directly to the skin to make molds of the face, hands and other body parts. The rubber cures quickly and will reproduce perfect detail from any original model – far better detail than any alginate! \u003cstrong\u003eBody Double™\u003c\/strong\u003e is skin safe and certified by an independent laboratory.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE: \u003c\/strong\u003eCartridge sizes require a 400 ml Dispensing Gun\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/tb\/files\/bodydouble_visual_coverage_chart.pdf\" rel=\"noopener\" target=\"_blank\"\u003eVisual Coverage Chart\u003c\/a\u003e\u003c\/p\u003e\n\u003cdiv class=\"slide-gallery\"\u003e\n\u003cdiv class=\"slider-main slider-main-1\"\u003e\n\u003ca href=\"https:\/\/www.smooth-on.com\/products\/body-double-standard-set\/#\" class=\"slider-control slider-left slider-1-left\" rel=\"undefined\"\u003e\u003c\/a\u003e\n\u003cdiv style=\"display: inline-block; width: 100%; max-width: 800px;\"\u003e\n\u003cdiv id=\"slider-wistia-mother-1\" class=\"wistia_responsive_padding\" style=\"padding: 56.25% 0 0 0; position: relative;\"\u003e\n\u003cdiv class=\"wistia_responsive_wrapper\" style=\"height: 100%; left: 0; position: absolute; top: 0; width: 100%;\"\u003e\u003ciframe src=\"https:\/\/player.vimeo.com\/video\/839082329?badge=0\u0026amp;autopause=0\u0026amp;title=0\u0026amp;portrait=0\u0026amp;byline=0\u0026amp;player_id=0\u0026amp;app_id=58479\" style=\"position: absolute; top: 0; left: 0; width: 100%; height: 100%;\" frameborder=\"0\" allow=\"autoplay; fullscreen; picture-in-picture\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ca href=\"https:\/\/www.smooth-on.com\/products\/body-double-standard-set\/#\" class=\"slider-control slider-right slider-1-right\" rel=\"yt:mc2YQ1pI12w\"\u003e\u003c\/a\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"slider-thumbs thumbs-9 slider-thumbs-1\"\u003e\n\u003cdiv class=\"iScrollWrapper\" style=\"transition-timing-function: cubic-bezier(0.1, 0.57, 0.1, 1); transition-duration: 0ms; transform: translate(0px) translateZ(0px);\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003eFeatures\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOne Casting or Many . . . For About The Same Price:\u003c\/strong\u003e unlike alginates, which are good for only one casting, \u003cstrong\u003eBody Double™\u003c\/strong\u003e will last for many castings of almost any material including plaster, \u003cstrong\u003eMatrix™ NEO™\u003c\/strong\u003e, wax, resins (\u003cstrong\u003eSmooth-Cast™\u003c\/strong\u003e urethanes, polyester, etc.), low-temperature melt metal alloys, etc. The amount of \u003cstrong\u003eBody Double\u003c\/strong\u003e™ used per mold is less than most alginates, so the cost per mold is about the same. Adding \u003cstrong\u003eHYPERFOLIC™\u003c\/strong\u003e release additive to \u003cstrong\u003eBody Double™\u003c\/strong\u003e silicone will create a self-releasing silicone which is easily removed from hair-covered body areas.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBody Double™\u003c\/strong\u003e “\u003cstrong\u003eStandard Set \u003c\/strong\u003eis for larger surface areas. It has a working time of 5 minutes and a demold time of 20 minutes*.\u003c\/p\u003e\n\u003cp\u003e*Depending on material temperature, ambient temperature and body temperature – see “Preparation” below for details.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shoplightspeed.com\/shops\/606431\/files\/51959254\/bodydoublestandardfastspecs.png\" alt=\"\" width=\"952\" height=\"271\"\u003e\u003c\/p\u003e\n\u003cp\u003eInstructions\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003ePREPARATION... \u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStore and use Body Double™ at room temperature (73°F \/ 23°C). \u003c\/strong\u003eWarmer temperatures will drastically reduce working time and cure time. Storing material at warmer temperatures will also reduce the usable shelf life of unused material. This product has a limited shelf life and should be used as soon as possible. Wear safety glasses, long sleeves and rubber gloves to minimize contamination risk. Mixing sticks should be flat and stiff with defined edges for scraping the sides and bottom of your mixing container.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eSafety \u003c\/strong\u003e\u003c\/em\u003e\u003cstrong\u003e- We recommend that you do a small scale test on the back of your hand\u003c\/strong\u003e to ensure that you have no allergic reaction to the release preparations or mold rubber. If you notice any type of skin reaction, do not use this product. \u003cstrong\u003eBody Double™\u003c\/strong\u003e is safe for skin application only – it should not be ingested. Do not use to make molds of the inside of the mouth. You can make molds of a smile - parted lips with teeth exposed, but closed together.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eAvoid Open Eye Contact -\u003c\/strong\u003e\u003c\/em\u003e In making a mold of the face, applying this silicone to closed eyes (after applying \u003cstrong\u003eBody Double™ Release Cream\u003c\/strong\u003e to avoid encapsulating eye lashes) is common practice. At no time should this or any other Smooth-On material come in contact with open eyes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLife casting is best done with at least three people. \u003c\/strong\u003eYou will be working with materials that set up quickly. One person is the designated model and the others will mix and apply mold rubber and support shell.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eCure Inhibition\u003c\/strong\u003e\u003c\/em\u003e - Contaminants on the skin will cause inhibition. Prior to applying \u003cstrong\u003eBody Double™ Release Cream\u003c\/strong\u003e, skin should be clean and free of make-up, cosmetics, skin creams, oils perfumes, etc. Do not apply rubber over skin coated with an aloe-based product, as this will cause cure inhibition. \u003cstrong\u003eDo not use latex gloves\u003c\/strong\u003e. If using a bald cap, make sure it is latex free.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBecause no two applications are quite the same, a small test application to determine suitability for your project is recommended if performance of this material is in question. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eRELEASING BODY DOUBLE™\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBody Double™\u003c\/strong\u003e will not stick to skin but it will “mechanically lock” onto skin hair including facial hair, eyebrows, eyelashes etc. \u003cstrong\u003eBody Double™ Release Cream\u003c\/strong\u003e or \u003cstrong\u003eHYPER-FOLIC™ Release Additive\u003c\/strong\u003e (see below) will minimize mechanical lock. Also, you can shave the intended molding area prior to applying \u003cstrong\u003eBody Double™\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBody Double™ Release Cream\u003c\/strong\u003e (available from Smooth-On) is a non-toxic skin conditioner that will aid in releasing \u003cstrong\u003eBody Double™\u003c\/strong\u003e mold rubber from skin surfaces with or without hair. It washes off with soap and water. It is highly concentrated, so a little goes a long way. To use, wash intended body section with soap and water and dry thoroughly. Liberally apply \u003cstrong\u003eBody Double™ Release Cream\u003c\/strong\u003e to all skin surfaces (bare and hair covered) that will contact mold rubber. \u003cstrong\u003eTake special care to aggressively massage and work the cream into and over body hair.\u003c\/strong\u003e Body hair not thoroughly coated with release cream will become encapsulated and stuck in rubber which will be difficult \u0026amp; painful to remove.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHYPER-FOLIC™ Release Additive\u003c\/strong\u003e is a non-toxic, skin conditioning liquid that is mixed with \u003cstrong\u003eBody Double™\u003c\/strong\u003e silicone mold rubber prior to applying rubber to the skin. \u003cstrong\u003eHYPER-FOLIC™\u003c\/strong\u003e will not only aid in releasing cured rubber from the skin but will also release cured rubber from hair-covered skin surfaces (closely cropped beards, moustaches, eye-brows, pubic hair, etc.) See the \u003cstrong\u003eHYPER-FOLIC™\u003c\/strong\u003e Technical Bulletin (available at www.smooth-on.com) for more information.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eMEASURING \u0026amp; MIXING... \u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eBody Double™ “Fast Set”\u003c\/strong\u003e\u003c\/em\u003e is best dispensed through its pre-measured \u003cstrong\u003e400 ml. cartridge tube system with static mixing tube\u003c\/strong\u003e (1\/2” – 18 elements). Cartridge dispensing guns and static mixing tubes are available from Smooth-On distributors. On cartridge tube set (A+B), remove clear cap from cartridge end and Twist \/ break off end-cap. Screw on static mixing tube and place cartridge in dispensing gun.\u003c\/p\u003e\n\u003cp\u003eDo not squeeze trigger until you are ready to apply rubber. After squeezing trigger, Parts A \u0026amp; B will quickly be mixed through the static mixing tube and dispensed through the tip in a uniform color. Dispense directly onto skin and immediately spread mixture over all surfaces to be molded using a soft bristle brush.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e If you stop dispensing, product may cure in static mixing tube. If this happens, replace static mixing tube.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStorage Of Unused Material\u003c\/strong\u003e – Leave static mixing tube with cured material attached to cartridge. To use again, simply replace static mixing tube.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eBody Double™ “Standard Set”\u003c\/strong\u003e\u003c\/em\u003e is available in larger units (quarts, gallons, etc.). Mix ratio is 1A:1B by volume. Stir Part A and Part B thoroughly before dispensing. Dispense equal amounts into a mixing container and aggressively hand mix, making sure that you scrape the sides and bottom of your mixing container to attain a uniform color and eliminate any color streaks. Apply to skin with soft bristle brush.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOptional: \u003c\/strong\u003eFor initial layer or “detail coat”, rubber can be thinned for easier application with Smooth-On’s \u003cstrong\u003eSilicone Thinner™\u003c\/strong\u003e. Apply to skin with soft bristle brush. Subsequent layers can be applied without thinner.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdd material as necessary\u003c\/strong\u003e – \u003cstrong\u003eBody Double™\u003c\/strong\u003e sticks to itself, so adding more rubber is not a problem. Add new material as soon as possible. Be careful when adding new material to cured material - carefully “marry” sections to minimize seam lines. Final mold thickness should be ¼” – ½” (1 cm). Let material cure fully before applying support shell.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eAPPLYING A SUPPORT SHELL, DEMOLDING \u0026amp; CASTING... \u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eGypsona™ Plaster Bandages\u003c\/strong\u003e\u003c\/em\u003e (available from Smooth-On) remain the industry standard for making a fast, strong support shell. After \u003cstrong\u003eBody Double™\u003c\/strong\u003e rubber has cured, brush a thin layer of petroleum jelly onto rubber mold surface to minimize chances of suction or mechanical locking of rigid support shell. Wet and apply bandages over rubber mold surface, following contours. Bandages dry in 15 minutes and can be removed from rubber surface.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eDemold Rubber From Body \u003c\/strong\u003e\u003c\/em\u003e- Slowly peel rubber away from skin surface. If you encounter encapsulated hair that is stuck (did not get enough release agent), you may have to slowly cut the hair with scissors. Be careful not to cut your skin or the mold rubber.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eRemoving Body Double™ Release Cream\u003c\/strong\u003e\u003c\/em\u003e – \u003cstrong\u003eMake-Up Remover will work well.\u003c\/strong\u003e Apply to skin and then wash area with soap and water. \u003cstrong\u003eBaby oil will also work, \u003c\/strong\u003ebut may leave a residue on the skin.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eCasting\u003c\/strong\u003e\u003c\/em\u003e - Seat rubber mold into support shell before casting. A release agent is not necessary when casting most materials. \u003cstrong\u003eIf casting another platinum-cure silicone rubber,\u003c\/strong\u003e use \u003cstrong\u003eEase Release™ 200\u003c\/strong\u003e. \u003cstrong\u003eIf casting resins,\u003c\/strong\u003e let rubber cure at least 60 minutes before casting. Store cured \u003cstrong\u003eBody Double™\u003c\/strong\u003e rubber mold in support shell for best results.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/msds\/files\/BD_DS_Eco_Equ_EZB_EZS_Psy_MS_OOMOO_Reb_ST_SS_Soma_Sol_Sorta.pdf\" rel=\"noopener\" target=\"_blank\"\u003eSDS\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/tb\/files\/BODY_DOUBLE.pdf\" rel=\"noopener\" target=\"_blank\"\u003eTDS\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/tb\/files\/SkinSafeDocs\/BodyDoubleSkinSafeCertification5292018.pdf\" rel=\"noopener\" target=\"_blank\"\u003eSkin Safety Certification\u003c\/a\u003e\u003c\/p\u003e","brand":"Smooth-On","offers":[{"title":"Trial Kit (2 lbs. \/ 0.91 kg.)","offer_id":48015732343099,"sku":"84144","price":46.99,"currency_code":"USD","in_stock":false},{"title":"2 Gallon Kit (18 lbs. \/ 8.16 kg.)","offer_id":48015732375867,"sku":"84161","price":297.0,"currency_code":"USD","in_stock":false},{"title":"10 Gallon Kit (90 lbs. \/ 40.82 kg.)","offer_id":48015732408635,"sku":"84171","price":1249.99,"currency_code":"USD","in_stock":false},{"title":"400mL Cartridge (1 lbs. \/ 0.45 kg.)","offer_id":48015732441403,"sku":"84132","price":37.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/BodyDoubleStandardSet-combo-1400x1050-w-cartridge.jpg?v=1748698807"},{"product_id":"body-double-standard-set-starter-kit","title":"Body Double™ Standard Set Starter Kit (3 lbs. \/ 1.36 kg.)","description":"\u003cp\u003e\u003cstrong\u003eBody Double™\u003c\/strong\u003e is a long lasting platinum-cure silicone rubber that can be applied directly to the skin to make molds of the face, hands and other body parts. The rubber cures quickly and will reproduce perfect detail from any original model – far better detail than any alginate! \u003cstrong\u003eBody Double™\u003c\/strong\u003e is skin safe and certified by an independent laboratory.\u003c\/p\u003e\n\u003cp\u003eStarter kit contains all supplies needed to make a mold and support shell of a moderately sized area of the body. Includes trial size \u003cstrong\u003eBody Double™ \u003c\/strong\u003eSilicone, 2 rolls of 4\" width bandages, \u003cstrong\u003eBody Double™ Release Cream\u003c\/strong\u003e, mixing sticks and containers.  Read TB and SDS Before Using.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/tb\/files\/bodydouble_visual_coverage_chart.pdf\" rel=\"noopener\" target=\"_blank\"\u003eVisual Coverage Chart\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eFeatures\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOne Casting or Many . . . For About The Same Price:\u003c\/strong\u003e unlike alginates, which are good for one only casting, \u003cstrong\u003eBody Double™\u003c\/strong\u003e will last for many castings of almost any material including plaster, \u003cstrong\u003eMatrix™ Neo™\u003c\/strong\u003e, wax, resins (\u003cstrong\u003eSmooth-Cast™\u003c\/strong\u003e urethanes, polyester, etc.), low-temperature melt metal alloys, etc. The amount of \u003cstrong\u003eBody Double™\u003c\/strong\u003e used per mold is less than most alginates, so the cost per mold is about the same. Adding \u003cstrong\u003eHYPER-FOLIC™\u003c\/strong\u003e release additive to \u003cstrong\u003eBody Double™\u003c\/strong\u003e silicone will create a self-releasing silicone which is easily removed from hair-covered body areas.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBody Double™\u003c\/strong\u003e \u003cstrong\u003eStandard Set\u003c\/strong\u003e for larger surface areas. Working time of 5 minutes and a demold time of 20 minutes*.\u003c\/p\u003e\n\u003cp\u003e*Depending on material temperature, ambient temperature and body temperature – see “Preparation” below for details.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shoplightspeed.com\/shops\/606431\/files\/51959254\/bodydoublestandardfastspecs.png\" alt=\"\" width=\"952\" height=\"271\"\u003e\u003c\/p\u003e\n\u003cp\u003eInstructions\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003ePREPARATION... \u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStore and use Body Double™ at room temperature (73°F \/ 23°C). \u003c\/strong\u003eWarmer temperatures will drastically reduce working time and cure time. Storing material at warmer temperatures will also reduce the usable shelf life of unused material. This product has a limited shelf life and should be used as soon as possible. Wear safety glasses, long sleeves and rubber gloves to minimize contamination risk. Mixing sticks should be flat and stiff with defined edges for scraping the sides and bottom of your mixing container.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eSafety \u003c\/strong\u003e\u003c\/em\u003e\u003cstrong\u003e- We recommend that you do a small scale test on the back of your hand\u003c\/strong\u003e to ensure that you have no allergic reaction to the release preparations or mold rubber. If you notice any type of skin reaction, do not use this product. \u003cstrong\u003eBody Double™\u003c\/strong\u003e is safe for skin application only – it should not be ingested. Do not use to make molds of the inside of the mouth. You can make molds of a smile - parted lips with teeth exposed, but closed together.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLife casting is best done with at least three people. \u003c\/strong\u003eYou will be working with materials that set up quickly. One person is the designated model and the others will mix and apply mold rubber and support shell.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eCure Inhibition\u003c\/strong\u003e\u003c\/em\u003e - Contaminants on the skin will cause inhibition. Prior to applying \u003cstrong\u003eBody Double™ Release Cream\u003c\/strong\u003e, skin should be clean and free of make-up, cosmetics, skin creams, oils perfumes, etc. Do not apply rubber over skin coated with an aloe-based product, as this will cause cure inhibition. \u003cstrong\u003eDo not use latex gloves\u003c\/strong\u003e. If using a bald cap, make sure it is latex free.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBecause no two applications are quite the same, a small test application to determine suitability for your project is recommended if performance of this material is in question. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eRELEASING BODY DOUBLE™... \u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBody Double™\u003c\/strong\u003e will not stick to skin but it will “mechanically lock” onto skin hair including facial hair, eyebrows, eyelashes etc. \u003cstrong\u003eBody Double™ Release Cream\u003c\/strong\u003e or \u003cstrong\u003eHYPER-FOLIC™ Release Additive \u003c\/strong\u003e(see below) will minimize mechanical lock. Also, you can shave the intended molding area prior to applying \u003cstrong\u003eBody Double™\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBody Double™ Release Cream\u003c\/strong\u003e (available from Smooth-On) is a non-toxic skin conditioner that will aid in releasing \u003cstrong\u003eBody Double™\u003c\/strong\u003e mold rubber from skin surfaces with or without hair. It washes off with soap and water. It is highly concentrated, so a little goes a long way. To use, wash intended body section with soap and water and dry thoroughly. Liberally apply \u003cstrong\u003eBody Double™ Release Cream\u003c\/strong\u003e to all skin surfaces (bare and hair covered) that will contact mold rubber. \u003cstrong\u003eTake special care to aggressively massage and work the cream into and over body hair.\u003c\/strong\u003e Body hair not thoroughly coated with release cream will become encapsulated and stuck in rubber which will be difficult \u0026amp; painful to remove.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHYPER-FOLIC™ Release Additive\u003c\/strong\u003e is a non-toxic, skin conditioning liquid that is mixed with \u003cstrong\u003eBody Double™\u003c\/strong\u003e silicone mold rubber prior to applying rubber to the skin. \u003cstrong\u003eHYPER-FOLIC™\u003c\/strong\u003e will not only aid in releasing cured rubber from the skin but will also release cured rubber from hair-covered skin surfaces (closely cropped beards, moustaches, eye-brows, pubic hair, etc.) See the \u003cstrong\u003eHYPER-FOLIC™ \u003c\/strong\u003eTechnical Bulletin (available at www.smooth-on.com) for more information.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eMEASURING \u0026amp; MIXING... \u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eBody Double™ Fast Set\u003c\/strong\u003e\u003c\/em\u003e is best dispensed through its pre-measured \u003cstrong\u003e400 ml. cartridge tube system with static mixing tube\u003c\/strong\u003e (1\/2” – 18 elements). Cartridge dispensing guns and static mixing tubes are available from Smooth-On distributors. On cartridge tube set (A+B), remove clear cap from cartridge end and Twist \/ break off end-cap. Screw on static mixing tube and place cartridge in dispensing gun.\u003c\/p\u003e\n\u003cp\u003eDo not squeeze trigger until you are ready to apply rubber. After squeezing trigger, Parts A \u0026amp; B will quickly be mixed through the static mixing tube and dispensed through the tip in a uniform color. Dispense directly onto skin and immediately spread mixture over all surfaces to be molded using a soft bristle brush.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e If you stop dispensing, product may cure in static mixing tube. If this happens, replace static mixing tube.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStorage Of Unused Material\u003c\/strong\u003e – Leave static mixing tube with cured material attached to cartridge. To use again, simply replace static mixing tube.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eBody Double™ Standard Set\u003c\/strong\u003e\u003c\/em\u003e is available in larger units (quarts, gallons, etc.). Mix ratio is 1A:1B by volume. Stir Part A and Part B thoroughly before dispensing. Dispense equal amounts into a mixing container and aggressively hand mix, making sure that you scrape the sides and bottom of your mixing container to attain a uniform color and eliminate any color streaks. Apply to skin with soft bristle brush.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOptional: \u003c\/strong\u003eFor initial layer or “detail coat”, rubber can be thinned for easier application with Smooth-On’s \u003cstrong\u003eSilicone Thinner™\u003c\/strong\u003e. Apply to skin with soft bristle brush. Subsequent layers can be applied without thinner.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdd material as necessary\u003c\/strong\u003e – \u003cstrong\u003eBody Double™\u003c\/strong\u003e sticks to itself, so adding more rubber is not a problem. Add new material as soon as possible. Be careful when adding new material to cured material - carefully “marry” sections to minimize seam lines. Final mold thickness should be ¼” – ½” (1 cm). Let material cure fully before applying support shell.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eAPPLYING A SUPPORT SHELL, DEMOLDING \u0026amp; CASTING... \u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eGypsona™ Plaster Bandages\u003c\/strong\u003e\u003c\/em\u003e (available from Smooth-On) remain the industry standard for making a fast, strong support shell. After \u003cstrong\u003eBody Double™\u003c\/strong\u003e rubber has cured, brush a thin layer of petroleum jelly onto rubber mold surface to minimize chances of suction or mechanical locking of rigid support shell. Wet and apply bandages over rubber mold surface, following contours. Bandages dry in 15 minutes and can be removed from rubber surface.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eDemold Rubber From Body \u003c\/strong\u003e\u003c\/em\u003e- Slowly peel rubber away from skin surface. If you encounter encapsulated hair that is stuck (did not get enough release agent), you may have to slowly cut the hair with scissors. Be careful not to cut your skin or the mold rubber.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eRemoving Body Double™ Release Cream\u003c\/strong\u003e\u003c\/em\u003e – \u003cstrong\u003eMake-Up Remover will work well.\u003c\/strong\u003e Apply to skin and then wash area with soap and water. \u003cstrong\u003eBaby oil will also work, \u003c\/strong\u003ebut may leave a residue on the skin.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eCasting\u003c\/strong\u003e\u003c\/em\u003e - Seat rubber mold into support shell before casting. A release agent is not necessary when casting most materials. \u003cstrong\u003eIf casting another platinum-cure silicone rubber,\u003c\/strong\u003e use Ease Release™ 200. \u003cstrong\u003eIf casting resins,\u003c\/strong\u003e let rubber cure at least 60 minutes before casting. Store cured \u003cstrong\u003eBody Double™\u003c\/strong\u003e rubber mold in support shell for best results.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/msds\/files\/BD_DS_Eco_Equ_EZB_EZS_Psy_MS_OOMOO_Reb_ST_SS_Soma_Sol_Sorta.pdf\" rel=\"noopener\" target=\"_blank\"\u003eSDS\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/tb\/files\/BODY_DOUBLE.pdf\" rel=\"noopener\" target=\"_blank\"\u003eTDS\u003c\/a\u003e\u003c\/p\u003e","brand":"Smooth-On","offers":[{"title":"Default","offer_id":48015733981499,"sku":"84152","price":81.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/BodyDoubleStandard-Starter-Kit-trial-1400x1050.jpg?v=1748698844"},{"product_id":"body-double-fast-set","title":"Body Double™ Fast Set","description":"\u003cp\u003e\u003cstrong\u003eBody Double™\u003c\/strong\u003e is a long lasting platinum-cure silicone rubber that can be applied directly to the skin to make molds of the face, hands and other body parts. The rubber cures quickly and will reproduce perfect detail from any original model – far better detail than any alginate! \u003cstrong\u003eBody Double™\u003c\/strong\u003e is skin safe and certified by an independent laboratory.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE: \u003c\/strong\u003eCartridge sizes require a 400 ml Dispensing Gun\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/tb\/files\/bodydouble_visual_coverage_chart.pdf\" rel=\"noopener\" target=\"_blank\"\u003eVisual Coverage Chart\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eFeatures\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOne Casting or Many . . . For About The Same Price:\u003c\/strong\u003e unlike alginates, which are good for only one casting, \u003cstrong\u003eBody Double™\u003c\/strong\u003e will last for many castings of almost any material including plaster, \u003cstrong\u003eMatrix™ NEO™\u003c\/strong\u003e, wax, resins (\u003cstrong\u003eSmooth-Cast™\u003c\/strong\u003e urethanes, polyester, etc.), low-temperature melt metal alloys, etc. The amount of \u003cstrong\u003eBody Double\u003c\/strong\u003e™ used per mold is less than most alginates, so the cost per mold is about the same. Adding \u003cstrong\u003eHYPERFOLIC™\u003c\/strong\u003e release additive to \u003cstrong\u003eBody Double™\u003c\/strong\u003e silicone will create a self-releasing silicone which is easily removed from hair-covered body areas.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBody Double™\u003c\/strong\u003e “\u003cstrong\u003eFast Set\u003c\/strong\u003e” for fast turnaround. Working time of 90 seconds and a demold time of 7 minutes*.\u003c\/p\u003e\n\u003cp\u003e*Depending on material temperature, ambient temperature and body temperature – see “Preparation” below for details.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shoplightspeed.com\/shops\/606431\/files\/51959254\/bodydoublestandardfastspecs.png\" alt=\"\" width=\"952\" height=\"271\"\u003e\u003c\/p\u003e\n\u003cp\u003eInstructions\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003ePREPARATION... \u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStore and use Body Double™ at room temperature (73°F \/ 23°C). \u003c\/strong\u003eWarmer temperatures will drastically reduce working time and cure time. Storing material at warmer temperatures will also reduce the usable shelf life of unused material. This product has a limited shelf life and should be used as soon as possible. Wear safety glasses, long sleeves and rubber gloves to minimize contamination risk. Mixing sticks should be flat and stiff with defined edges for scraping the sides and bottom of your mixing container.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eSafety \u003c\/strong\u003e\u003c\/em\u003e\u003cstrong\u003e- We recommend that you do a small scale test on the back of your hand\u003c\/strong\u003e to ensure that you have no allergic reaction to the release preparations or mold rubber. If you notice any type of skin reaction, do not use this product. \u003cstrong\u003eBody Double™\u003c\/strong\u003e is safe for skin application only – it should not be ingested. Do not use to make molds of the inside of the mouth. You can make molds of a smile - parted lips with teeth exposed, but closed together.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eAvoid Open Eye Contact -\u003c\/strong\u003e\u003c\/em\u003e In making a mold of the face, applying this silicone to closed eyes (after applying \u003cstrong\u003eBody Double™ Release Cream\u003c\/strong\u003e to avoid encapsulating eye lashes) is common practice. At no time should this or any other Smooth-On material come in contact with open eyes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLife casting is best done with at least three people. \u003c\/strong\u003eYou will be working with materials that set up quickly. One person is the designated model and the others will mix and apply mold rubber and support shell.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eCure Inhibition\u003c\/strong\u003e\u003c\/em\u003e - Contaminants on the skin will cause inhibition. Prior to applying \u003cstrong\u003eBody Double™ Release Cream\u003c\/strong\u003e, skin should be clean and free of make-up, cosmetics, skin creams, oils perfumes, etc. Do not apply rubber over skin coated with an aloe-based product, as this will cause cure inhibition. \u003cstrong\u003eDo not use latex gloves\u003c\/strong\u003e. If using a bald cap, make sure it is latex free.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBecause no two applications are quite the same, a small test application to determine suitability for your project is recommended if performance of this material is in question. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eRELEASING BODY DOUBLE™\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBody Double™\u003c\/strong\u003e will not stick to skin but it will “mechanically lock” onto skin hair including facial hair, eyebrows, eyelashes etc. \u003cstrong\u003eBody Double™ Release Cream\u003c\/strong\u003e or \u003cstrong\u003eHYPER-FOLIC™ Release Additive \u003c\/strong\u003e(see below) will minimize mechanical lock. Also, you can shave the intended molding area prior to applying \u003cstrong\u003eBody Double™\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBody Double™ Release Cream\u003c\/strong\u003e (available from Smooth-On) is a non-toxic skin conditioner that will aid in releasing \u003cstrong\u003eBody Double™\u003c\/strong\u003e mold rubber from skin surfaces with or without hair. It washes off with soap and water. It is highly concentrated, so a little goes a long way. To use, wash intended body section with soap and water and dry thoroughly. Liberally apply \u003cstrong\u003eBody Double™ Release Cream\u003c\/strong\u003e to all skin surfaces (bare and hair covered) that will contact mold rubber. \u003cstrong\u003eTake special care to aggressively massage and work the cream into and over body hair.\u003c\/strong\u003e Body hair not thoroughly coated with release cream will become encapsulated and stuck in rubber which will be difficult \u0026amp; painful to remove.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHYPER-FOLIC™ Release Additive\u003c\/strong\u003e is a non-toxic, skin conditioning liquid that is mixed with \u003cstrong\u003eBody Double™\u003c\/strong\u003e silicone mold rubber prior to applying rubber to the skin. \u003cstrong\u003eHYPER-FOLIC™\u003c\/strong\u003e will not only aid in releasing cured rubber from the skin but will also release cured rubber from hair-covered skin surfaces (closely cropped beards, moustaches, eye-brows, pubic hair, etc.) See the \u003cstrong\u003eHYPER-FOLIC™\u003c\/strong\u003e Technical Bulletin (available at www.smooth-on.com) for more information.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eMEASURING \u0026amp; MIXING... \u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eBody Double™ “Fast Set”\u003c\/strong\u003e\u003c\/em\u003e is best dispensed through its pre-measured \u003cstrong\u003e400 ml. cartridge tube system with static mixing tube\u003c\/strong\u003e (1\/2” – 18 elements). Cartridge dispensing guns and static mixing tubes are available from Smooth-On distributors. On cartridge tube set (A+B), remove clear cap from cartridge end and Twist \/ break off end-cap. Screw on static mixing tube and place cartridge in dispensing gun.\u003c\/p\u003e\n\u003cp\u003eDo not squeeze trigger until you are ready to apply rubber. After squeezing trigger, Parts A \u0026amp; B will quickly be mixed through the static mixing tube and dispensed through the tip in a uniform color. Dispense directly onto skin and immediately spread mixture over all surfaces to be molded using a soft bristle brush.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e If you stop dispensing, product may cure in static mixing tube. If this happens, replace static mixing tube.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eStorage Of Unused Material\u003c\/strong\u003e \u003c\/em\u003e– Leave static mixing tube with cured material attached to cartridge. To use again, simply replace static mixing tube.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eBody Double™ “Standard Set”\u003c\/strong\u003e\u003c\/em\u003e is available in larger units (quarts, gallons, etc.). Mix ratio is 1A:1B by volume. Stir Part A and Part B thoroughly before dispensing. Dispense equal amounts into a mixing container and aggressively hand mix, making sure that you scrape the sides and bottom of your mixing container to attain a uniform color and eliminate any color streaks. Apply to skin with soft bristle brush.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOptional: \u003c\/strong\u003eFor initial layer or “detail coat”, rubber can be thinned for easier application with Smooth-On’s \u003cstrong\u003eSilicone Thinner\u003c\/strong\u003e\u003cem\u003e\u003cstrong\u003e™\u003c\/strong\u003e\u003c\/em\u003e\u003cstrong\u003e.\u003c\/strong\u003e Apply to skin with soft bristle brush. Subsequent layers can be applied without thinner.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eAdd material as necessary\u003c\/strong\u003e \u003c\/em\u003e– \u003cstrong\u003eBody Double™\u003c\/strong\u003e sticks to itself, so adding more rubber is not a problem. Add new material as soon as possible. Be careful when adding new material to cured material - carefully “marry” sections to minimize seam lines. Final mold thickness should be ¼” – ½” (1 cm). Let material cure fully before applying support shell.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eAPPLYING A SUPPORT SHELL, DEMOLDING \u0026amp; CASTING... \u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eGypsona™ Plaster Bandages\u003c\/strong\u003e\u003c\/em\u003e (available from Smooth-On) remain the industry standard for making a fast, strong support shell. After \u003cstrong\u003eBody Double™\u003c\/strong\u003e rubber has cured, brush a thin layer of petroleum jelly onto rubber mold surface to minimize chances of suction or mechanical locking of rigid support shell. Wet and apply bandages over rubber mold surface, following contours. Bandages dry in 15 minutes and can be removed from rubber surface.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eDemold Rubber From Body \u003c\/strong\u003e\u003c\/em\u003e- Slowly peel rubber away from skin surface. If you encounter encapsulated hair that is stuck (did not get enough release agent), you may have to slowly cut the hair with scissors. Be careful not to cut your skin or the mold rubber.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eRemoving Body Double™ Release Cream\u003c\/strong\u003e\u003c\/em\u003e – \u003cstrong\u003eMake-Up Remover will work well.\u003c\/strong\u003e Apply to skin and then wash area with soap and water. \u003cstrong\u003eBaby oil will also work, \u003c\/strong\u003ebut may leave a residue on the skin.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eCasting\u003c\/strong\u003e\u003c\/em\u003e - Seat rubber mold into support shell before casting. A release agent is not necessary when casting most materials. \u003cstrong\u003eIf casting another platinum-cure silicone rubber,\u003c\/strong\u003e use \u003cstrong\u003eEase Release™ 200\u003c\/strong\u003e. \u003cstrong\u003eIf casting resins,\u003c\/strong\u003e let rubber cure at least 60 minutes before casting. Store cured \u003cstrong\u003eBody Double™\u003c\/strong\u003e rubber mold in support shell for best results.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/msds\/files\/BD_DS_Eco_Equ_EZB_EZS_Psy_MS_OOMOO_Reb_ST_SS_Soma_Sol_Sorta.pdf\" rel=\"noopener\" target=\"_blank\"\u003eSDS\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/tb\/files\/BODY_DOUBLE.pdf\" rel=\"noopener\" target=\"_blank\"\u003eTDS\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/tb\/files\/SkinSafeDocs\/BodyDoubleSkinSafeCertification5292018.pdf\" rel=\"noopener\" target=\"_blank\"\u003eSkin Safety Certification\u003c\/a\u003e\u003c\/p\u003e","brand":"Smooth-On","offers":[{"title":"Trial Kit (2 lbs. \/ 0.91 kg.)","offer_id":48015734669627,"sku":"83744","price":46.99,"currency_code":"USD","in_stock":true},{"title":"2 Gallon Kit (18 lbs. \/ 8.16 kg.)","offer_id":48015734702395,"sku":"083761","price":297.99,"currency_code":"USD","in_stock":true},{"title":"400mL Cartridge (1 lbs. \/ 0.45 kg.)","offer_id":48015734735163,"sku":"083742","price":37.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/BodyDouble-Fast-combo-1400x1050-w-cartridge.jpg?v=1748698385"},{"product_id":"body-double-silk","title":"Body Double™ SILK","description":"\u003cp\u003e\u003cstrong\u003eBody Double™ SILK\u003c\/strong\u003e is a \u003cstrong\u003eself-releasing \u003c\/strong\u003eplatinum-cure silicone rubber that can be applied directly to the skin to make molds of the face, hands and other body parts. The rubber cures quickly and will reproduce excellent detail from any original model. \u003cstrong\u003eCertified Skin Safe\u003c\/strong\u003e - Material is skin safe and certified by an independent laboratory. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBody Double™ SILK will release from closely cropped hair-covered skin surfaces \u003c\/strong\u003e(short beards, mustaches, eyebrows, pubic hair, etc.). Release cream or \u003cstrong\u003eHyper-Folic™\u003c\/strong\u003e are not needed when using \u003cstrong\u003eBody Double™ SILK\u003c\/strong\u003e. \u003cstrong\u003eBody Double™ SILK \u003c\/strong\u003ewill last for many castings of almost any material including plaster, \u003cstrong\u003eMatrix™ NEO™\u003c\/strong\u003e, wax, resins (\u003cstrong\u003eSmooth-Cast™\u003c\/strong\u003e urethanes, polyester, etc.) \u003cstrong\u003eBody Double™ SILK\u003c\/strong\u003e has a working time of 6 minutes and a demold time of 20 minutes*.\u003c\/p\u003e\n\u003cp\u003e*Depending on material temperature, ambient temperature and body temperature – see “Preparation” below for details.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shoplightspeed.com\/shops\/606431\/files\/51961245\/bodydoublesilkspecs.png\" alt=\"\" width=\"916\" height=\"283\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/tb\/files\/bodydouble_visual_coverage_chart.pdf\" rel=\"noopener\" target=\"_blank\"\u003eVisual Coverage Chart\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e Instructions\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStore and use Body Double™ SILK at room temperature (73°F \/ 23°C).\u003c\/strong\u003e Warmer temperatures will drastically reduce working time and cure time. Storing material at warmer temperatures will also reduce the usable shelf life of unused material. This product has a limited shelf life and should be used as soon as possible. Wear safety glasses, long sleeves and rubber gloves to minimize contamination risk.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eSafety -\u003c\/em\u003e We recommend that you do a small scale test on the back of your hand\u003c\/strong\u003e to ensure that you have no allergic reaction to the mold rubber. If you notice any type of skin reaction, do not use this product. \u003cstrong\u003eBody Double™ SILK\u003c\/strong\u003e is safe for skin application only – it should not be ingested. Do not use to make molds of the inside of the mouth. You can make molds of a smile - parted lips with teeth exposed, but closed together.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eAvoid Open Eye Contact -\u003c\/strong\u003e\u003c\/em\u003e In making a mold of the face, applying this silicone to closed eyes (after applying \u003cstrong\u003eBody Double™ Release Cream\u003c\/strong\u003e to avoid encapsulating eye lashes) is common practice. At no time should this or any other Smooth-On material come in contact with open eyes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLife casting is best done with at least three people.\u003c\/strong\u003e You will be working with materials that set up quickly. One person is the designated model and the others will mix and apply mold rubber and support shell.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eCure Inhibition\u003c\/strong\u003e -\u003c\/em\u003e Contaminants on the skin may cause inhibition. Prior to applying \u003cstrong\u003eBody Double™ SILK\u003c\/strong\u003e, skin should be clean, dry and free of make-up, cosmetics, skin creams, oils perfumes, etc. Do not apply rubber over skin coated with an aloe-based product, as this will cause cure inhibition. \u003cstrong\u003eDo not use latex gloves.\u003c\/strong\u003e When using a bald cap, make sure it is latex free.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBecause no two applications are quite the same, a small test application to determine suitability for your project is recommended if performance of this material is in question.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eRELEASING BODY DOUBLE™ SILK -\u003c\/strong\u003e\u003c\/em\u003e \u003cstrong\u003eBody Double™ SILK\u003c\/strong\u003e is designed to not encapsulate body or facial hair such as \u003cstrong\u003eclosely cropped\u003c\/strong\u003e beards, moustaches, eye-brows, pubic hair, etc. A release cream or additive is not required in most cases. If performing a full-head lifecasting, use of a non-latex bald cap is recommended. \u003cstrong\u003eA small test application to determine suitability of release properties is recommended. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003ePRE-MIXING -\u003c\/em\u003e Stir Part A and Part B thoroughly before dispensing.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAfter pre-mixing Parts A and B, dispense equal amounts into a mixing container (1A:1B) and aggressively hand mix, making sure that you scrape the sides and bottom of your mixing container to attain a uniform color and eliminate any color streaks\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/msds\/files\/BD_DS_Eco_Equ_EZB_EZS_Psy_MS_OOMOO_Reb_ST_SS_Soma_Sol_Sorta.pdf\" rel=\"noopener\" target=\"_blank\"\u003eSDS\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/tb\/files\/BODY_DOUBLE_SILK_TB.pdf\" rel=\"noopener\" target=\"_blank\"\u003eTDS\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/tb\/files\/SkinSafeDocs\/Body%20Double%20SILK%20Skin%20Safe%20Certification%20111919.pdf\" rel=\"noopener\" target=\"_blank\"\u003eSkin Safety Certification\u003c\/a\u003e\u003c\/p\u003e","brand":"Smooth-On","offers":[{"title":"Trial Kit (1.7 lbs. \/ 0.77 kg.)","offer_id":48015735357755,"sku":"56444","price":40.99,"currency_code":"USD","in_stock":true},{"title":"2 Gallon Kit (14 lbs. \/ 6.35 kg.)","offer_id":48015735390523,"sku":"56461","price":254.99,"currency_code":"USD","in_stock":true},{"title":"10 Gallon Kit (70 lbs. \/ 31.75 kg.)","offer_id":48015735423291,"sku":"56471","price":1095.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/BodyDouble-Silk-combo-1400x1050.jpg?v=1748698712"},{"product_id":"hyper-folic","title":"HYPER-FOLIC™","description":"\u003cdiv class=\"info\"\u003e\n\u003cp\u003e\u003cstrong\u003eHYPER-FOLIC™\u003c\/strong\u003e Release Additive is a non-toxic, skin conditioning liquid that is mixed with \u003cstrong\u003eBody Double™\u003c\/strong\u003e silicone mold rubber prior to applying rubber to the skin.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHYPER-FOLIC™\u003c\/strong\u003e will not only aid in releasing cured rubber from the skin but will also release cured rubber from hair-covered skin surfaces (closely cropped beards, moustaches, eye-brows, pubic hair, etc.)\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"features\"\u003e\n\u003ca name=\"features\"\u003e\u003c\/a\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eAdvantages:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Double™\u003c\/strong\u003e with \u003cstrong\u003eHYPER-FOLIC™\u003c\/strong\u003e will still bond to itself.\u003c\/li\u003e\n\u003cli\u003eLittle or no release cream residue in the cured rubber means your mold is immediately ready for casting.\u003c\/li\u003e\n\u003cli\u003eUsed as directed, \u003cstrong\u003eHYPER-FOLIC™\u003c\/strong\u003e has minimal affect on the tear strength of \u003cstrong\u003eBody Double™\u003c\/strong\u003e, allowing for an extremely strong mold\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHYPER-FOLIC™\u003c\/strong\u003e does not affect the skin safety rating of \u003cstrong\u003eBody Double™\u003c\/strong\u003e silicone\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"instructions\"\u003e\n\u003ca name=\"instructions\"\u003e\u003c\/a\u003e\n\u003ch2\u003eInstructions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003ePREPARATION:\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGram Scale Necessary – For best results, always measure \u003cstrong\u003eHYPER-FOLIC™\u003c\/strong\u003e by weight.\u003c\/li\u003e\n\u003cli\u003eMake sure the surface of the skin is clean and dry. Do not use cleansers containing aloe vera on the skin before applying Body Double™ with HYPER-FOLIC™, as inhibition may result.\u003c\/li\u003e\n\u003cli\u003eAlthough \u003cstrong\u003eHYPER-FOLIC™\u003c\/strong\u003e will reduce the risk of body hair encapsulation, it is recommended that the hair be trimmed as short as possible.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eUsage Example \u003c\/strong\u003e\u003c\/em\u003e- 50 grams of \u003cstrong\u003eBody Double™ FAST SET\u003c\/strong\u003e part A and 50 grams of \u003cstrong\u003eBody Double™ FAST SET\u003c\/strong\u003e part B are weighed into separate containers using a gram scale. 20 grams of \u003cstrong\u003eHYPER-FOLIC™\u003c\/strong\u003e is added to \u003cstrong\u003eBody Double™\u003c\/strong\u003e part B and thoroughly mixed. \u003cstrong\u003eBody Double™\u003c\/strong\u003e part A is combined with the \u003cstrong\u003eBody Double™\u003c\/strong\u003e part B \/ \u003cstrong\u003eHYPER-FOLIC™\u003c\/strong\u003e in a larger mixing container and is mixed thoroughly. This mixture is then applied to the skin surface directly.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eUsage Option #1\u003c\/strong\u003e\u003c\/em\u003e - Mix \u003cstrong\u003eHYPER-FOLIC™\u003c\/strong\u003e with \u003cstrong\u003eBody Double™\u003c\/strong\u003e rubber components at a 100A + 100B + 40 Parts \u003cstrong\u003eHYPER-FOLIC™\u003c\/strong\u003e ratio by weight (20% \u003cstrong\u003eHYPER-FOLIC™\u003c\/strong\u003e added to the silicone by weight) and apply.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eResults\u003c\/strong\u003e\u003c\/em\u003e – \u003cstrong\u003eBody Double™\u003c\/strong\u003e mold rubber will completely penetrate facial or body hair and capture detail from underlying skin. Hair detail will mostly not be reflected in the finished mold or reproduced during casting. This technique is often used for prosthetic make-up applications.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eUsage Option #2\u003c\/strong\u003e -\u003c\/em\u003e Apply \u003cstrong\u003eBody Double™ Release Cream \u003c\/strong\u003eliberally to the skin and facial or body hair. Mix \u003cstrong\u003eHYPER-FOLIC™\u003c\/strong\u003e at a reduced amount with \u003cstrong\u003eBody Double™\u003c\/strong\u003e rubber components at a 100A + 100B + 20 Parts \u003cstrong\u003eHYPER-FOLIC™ \u003c\/strong\u003eratio by weight (10%\u003cstrong\u003e HYPER-FOLIC™\u003c\/strong\u003e added to the silicone by weight) and apply.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eResults\u003c\/strong\u003e\u003c\/em\u003e – \u003cstrong\u003eBody Double™\u003c\/strong\u003e mold rubber will partially penetrate hair and hair detail will be reflected in the finished mold or reproduced during casting.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eUSAGE TIPS\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOptional - Use \u003cstrong\u003eBody Double™\u003c\/strong\u003e mixed with \u003cstrong\u003eHYPER-FOLIC™\u003c\/strong\u003e on all skin surfaces. Ensure that all hair is covered by this layer. If hair remains exposed after applying this layer, apply more \u003cstrong\u003eBody Double™\u003c\/strong\u003e mixed with \u003cstrong\u003eHYPER-FOLIC™\u003c\/strong\u003e until hair is no longer visible. Apply at least one more layer of rubber using \u003cstrong\u003eBody Double™\u003c\/strong\u003e with no additive. This will result in a very strong mold which has excellent release from skin surfaces, even where hair is present.\u003c\/li\u003e\n\u003cli\u003eDoing a Full-Head Lifecasting? We recommend that the subject wear a non-latex bald cap.\u003c\/li\u003e\n\u003cli\u003eIf casting another platinum silicone (such as \u003cstrong\u003eDragon Skin™\u003c\/strong\u003e or \u003cstrong\u003eEcoflex™\u003c\/strong\u003e), apply \u003cstrong\u003eEase Release™ 200\u003c\/strong\u003e to the mold surface prior to casting to prevent adhesion.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eHow Does HYPER-FOLIC™ additive affect Body Double rubber?\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIt will lengthen the pot life and cure time of \u003cstrong\u003eBody Double™\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eIt will slightly reduce the tear strength of \u003cstrong\u003eBody Double™\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eCured\u003cstrong\u003e Body Double™\u003c\/strong\u003e rubber may shrink slightly over time vs. \u003cstrong\u003eBody Double™ \u003c\/strong\u003ewithout the additive\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eCasting Into The Finished Mold -\u003c\/strong\u003e\u003c\/em\u003e You can cast a variety of materials into the finished mold without a release agent including wax, plaster, concrete, resins, etc. Using a release agent (such as \u003cstrong\u003eEase Release™ 200\u003c\/strong\u003e) for production casting of resins will extend the production life of the mold.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/msds\/files\/Hyper-Folic.pdf\" rel=\"noopener\" target=\"_blank\"\u003eSDS\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/tb\/files\/HYPER-FOLIC_TB.pdf\" rel=\"noopener\" target=\"_blank\"\u003eTDS\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/tb\/files\/SkinSafeDocs\/HyperFolicSkinSafeCertification071519.pdf\" rel=\"noopener\" target=\"_blank\"\u003eSkin Safety Certification\u003c\/a\u003e\u003c\/p\u003e","brand":"Smooth-On","offers":[{"title":"Pint (0.9 lbs. \/ 0.41 kg.)","offer_id":48015735718203,"sku":"27242","price":21.99,"currency_code":"USD","in_stock":false},{"title":"Gallon (7 lbs. \/ 3.18 kg.)","offer_id":48015735750971,"sku":"27260A","price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/hyperfolic-combo-533x400-2.jpg?v=1710988611"},{"product_id":"fibergel-e-f-x-grade-alginate","title":"FiberGel E F\/X Grade Alginate","description":"\u003cp\u003eFiberGel alginate impression material is formulated for professional high-production, high-end detailed E F\/X work. FiberGel is independently tested 40% stronger than the leading brand because it contains a patent pending duo fiber matrix system. Set Time - 5-6 minutes.        \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eFiberGel alginate stays where you put it, too so it is the right selection for vertical surface alginate molds. The fibers not only add tear resistance and strength, they prevent runs and drips. The fiber matrix in the alginate formula retains moisture reducing shrink rate keeping your mold soft and flexible far beyond normal alginates. This allows for delayed casting times without the loss of detail.        \u003c\/p\u003e\n\u003cp\u003eThe unique patented alginate formula allows an even, creamy, one-coat coverage. A thicker or thinner mix can be had by varying the mix ratio. FiberGel alginate mixes smoothly and goes on easily and uniformly.\u003c\/p\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" href=\"https:\/\/www.artmolds.com\/pub\/media\/blfa_files\/SDS-FiberGel-E-FX_Alginate-US-04_27_2015.pdf\" target=\"_blank\"\u003eSDS\u003c\/a\u003e\u003c\/p\u003e","brand":"ArtMolds","offers":[{"title":"1lb","offer_id":48015744893243,"sku":"631101","price":19.95,"currency_code":"USD","in_stock":false},{"title":"10lb","offer_id":48015744926011,"sku":"631301","price":153.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/fibergel-1000px-1.jpg?v=1710988739"},{"product_id":"moldgel-alginate-regular-set","title":"MoldGel Alginate Regular Set","description":"\u003cp\u003e\u003cstrong\u003eThe Healthiest -- Most Environmental Friendly Mold Making Impression Material Alginate Available\u003cbr\u003e\u003c\/strong\u003e\u003cstrong\u003eHIGHLIGHTS: \u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eHealth Friendly – Silica-free and dustless, too!\u003c\/li\u003e\r\n\u003cli\u003eEnvironmentally GREEN – with all food grade ingredients\u003c\/li\u003e\r\n\u003cli\u003eHighest Yielding Formula – greatest value ounce-for-ounce\u003c\/li\u003e\r\n\u003cli\u003eDelayed Shrinkage – extends casting time requirements up 24-hrs.\u003c\/li\u003e\r\n\u003cli\u003eUltra Smooth and Creamy – reduces mold voids due to air bubbles\u003c\/li\u003e\r\n\u003cli\u003eStays In Place – improved surface tension reduces runs\u003c\/li\u003e\r\n\u003cli\u003eGradual Set Time – eliminates a setting surprise\u003c\/li\u003e\r\n\u003cli\u003eSurface Enhanced – improved gypsum and fast resin compatibilty\u003c\/li\u003e\r\n\u003cli\u003eApproved for ASTM D-4236 Labeling – independently tested\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003eIt is the healthiest, earth friendliest, most shrink resistant hydrocolloid impression material of its kind to date and . . . and provides 20-50-percent greater yields over traditional blends.\u003c\/p\u003e\r\n\u003cp\u003eThe new formula is both crystalline silica-free (OSHA recommends elimination of this potential hazard in the work place) and dust free eliminating inhalation hazards during dispensing. It is also fluoride free and ‘lead free’ which other formulas cannot represent. With all of these safety improvements it is by far the healthiest formula to use. \u003cbr\u003eThe new filler along with the other food grade components enriches the soil when discarded. This earth friendly product now makes disposing of used material not only a simple matter, but CO2 reducing, too. It actually helps in the fight against \u003cem\u003eglobal warming\u003c\/em\u003e and promotes clean air by nurturing carbon dioxide eliminating and oxygen producing plants.\u003cbr\u003eYet higher quality doesn’t mean higher cost. Intriguingly, the new formula holds more water in suspension than the old mixes which creates greater yields of impression material per pound. This means each pound of the improved mold powder when combined with water yields up to 50-percent more impression material compared to current formulations. \u003cbr\u003eAs an example with its 7-to-1 mix ratio by weight (water to powder) it yields more than twice as much impression material as brands that offer only 3-to-1 mix ratios. But, that is not all. The new discovery not only improves mold detail without the use of more toxic fluoride salts, but its innovative ingredients contain a cell structure that delays mold shrinkage by enabling it to hold water far longer than similar impression materials. With delayed shrinkage casting can be postponed to a more convenient time while still retaining all the original detail that would normally be lost with current blends. \u003cbr\u003eWhen your mold is no longer needed just crumble it up and add it to the soil or the compost pile as a supplement to foster plant growth. More importantly a high quality mold is assured every time through an improved manufacturing process that guarantees an ultra smooth and creamy, lump-free consistency.\u003cbr\u003eThe advanced formula has been evaluated by Info Tox. International, Inc., a toxicology, occupational safety and environmental health testing lab and consulting company based in Riverside, California and has been certified: ‘Approved Conforming to ASTM D-4236.’\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eMIXING AND CURING: \u003c\/strong\u003eWeigh or measure proper amounts of MoldGel SILFREE Regular Set powder and 80° F. \/ 27° C water. Mix together rapidly, but avoid whipping in air. A turbo mixer on a variable speed drill is recommended. Thicken with more powder, thin with more water. Apply to surface with a flowing motion pushing air out ahead of material. Optional liquid retarder may be premixed with water to extend working time. See chart.\u003c\/p\u003e\r\n\u003cp\u003eMoldGel will not bond to itself unless the previous mix is not completely set. Thus, a large mold requiring more than one mix should be made by mixing a series of mixes within five minutes of one another. Bonding can be accomplished on gelled MoldGel by spraying or painting Algislo on the surface of the mold material. You can also embed fiber into MoldGel to secure the shell. As soon as MoldGel is firm, mix and apply a mother mold using plaster bandages or cheesecloth and diluted plaster. When plaster shell is set, remove the mold. It is recommended that a positive casting be made within 12-hours, as MoldGel SilFree will begin to loose detail as it dries. ArtMolds offers three variations to its new formula . . . Hollywood Impressions® SILFREE with a 2-3 minute set time in 80-degree F. (27-degrees C.) water. It is tinted green and an attractive lime scented. MoldGel® SILFREE Regular Set has a 4-5 minute set time with an orange tint and a pleasant orange fragrance. Then there is MoldGel® SILFREE SloSet with a 7-8 minute set time and is blue tinted with a peppermint candy scent.\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/www.artmolds.com\/pub\/media\/blfa_files\/SDS_ArtMolds_Impression_Material-SILFREE-US-04_20_2015.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSDS\u003c\/a\u003e\u003c\/p\u003e","brand":"ArtMolds","offers":[{"title":"1lb","offer_id":48015745089851,"sku":"Am1R0101W","price":18.95,"currency_code":"USD","in_stock":true},{"title":"10lb","offer_id":48015745122619,"sku":"6310110","price":149.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/moldgel-regset-1000px.jpg?v=1710988741"},{"product_id":"moldgel-alginate-slo-set","title":"MoldGel Alginate Slo Set","description":"\u003cp\u003e\u003cstrong\u003eThe Healthiest -- Most Environmental Friendly Mold Making Impression Material Alginate Available\u003cbr\u003e\u003c\/strong\u003e\u003cstrong\u003eHIGHLIGHTS: \u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eHealth Friendly – Silica-free and dustless, too!\u003c\/li\u003e\r\n\u003cli\u003eEnvironmentally GREEN – with all food grade ingredients\u003c\/li\u003e\r\n\u003cli\u003eHighest Yielding Formula – greatest value ounce-for-ounce\u003c\/li\u003e\r\n\u003cli\u003eDelayed Shrinkage – extends casting time requirements up 24-hrs.\u003c\/li\u003e\r\n\u003cli\u003eUltra Smooth and Creamy – reduces mold voids due to air bubbles\u003c\/li\u003e\r\n\u003cli\u003eStays In Place – improved surface tension reduces runs\u003c\/li\u003e\r\n\u003cli\u003eGradual Set Time – eliminates a setting surprise\u003c\/li\u003e\r\n\u003cli\u003eSurface Enhanced – improved gypsum and fast resin compatibilty\u003c\/li\u003e\r\n\u003cli\u003eApproved for ASTM D-4236 Labeling – independently tested\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003eIt is the healthiest, earth friendliest, most shrink resistant hydrocolloid impression material of its kind to date and . . . and provides 20-50-percent greater yields over traditional blends.\u003c\/p\u003e\r\n\u003cp\u003eThe new formula is both crystalline silica-free (OSHA recommends elimination of this potential hazard in the work place) and dust free eliminating inhalation hazards during dispensing. It is also fluoride free and ‘lead free’ which other formulas cannot represent. With all of these safety improvements it is by far the healthiest formula to use. \u003cbr\u003eThe new filler along with the other food grade components enriches the soil when discarded. This earth friendly product now makes disposing of used material not only a simple matter, but CO2 reducing, too. It actually helps in the fight against \u003cem\u003eglobal warming\u003c\/em\u003e and promotes clean air by nurturing carbon dioxide eliminating and oxygen producing plants.\u003cbr\u003eYet higher quality doesn’t mean higher cost. Intriguingly, the new formula holds more water in suspension than the old mixes which creates greater yields of impression material per pound. This means each pound of the improved mold powder when combined with water yields up to 50-percent more impression material compared to current formulations. \u003cbr\u003eAs an example with its 7-to-1 mix ratio by weight (water to powder) it yields more than twice as much impression material as brands that offer only 3-to-1 mix ratios. But, that is not all. The new discovery not only improves mold detail without the use of more toxic fluoride salts, but its innovative ingredients contain a cell structure that delays mold shrinkage by enabling it to hold water far longer than similar impression materials. With delayed shrinkage casting can be postponed to a more convenient time while still retaining all the original detail that would normally be lost with current blends. \u003cbr\u003eWhen your mold is no longer needed just crumble it up and add it to the soil or the compost pile as a supplement to foster plant growth. More importantly a high quality mold is assured every time through an improved manufacturing process that guarantees an ultra smooth and creamy, lump-free consistency.\u003cbr\u003eThe advanced formula has been evaluated by Info Tox. International, Inc., a toxicology, occupational safety and environmental health testing lab and consulting company based in Riverside, California and has been certified: ‘Approved Conforming to ASTM D-4236.’\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eMIXING AND CURING: \u003c\/strong\u003eWeigh or measure proper amounts of MoldGel SILFREE Regular Set powder and 80° F. \/ 27° C water. Mix together rapidly, but avoid whipping in air. A turbo mixer on a variable speed drill is recommended. Thicken with more powder, thin with more water. Apply to surface with a flowing motion pushing air out ahead of material. Optional liquid retarder may be premixed with water to extend working time. See chart.\u003c\/p\u003e\r\n\u003cp\u003eMoldGel will not bond to itself unless the previous mix is not completely set. Thus, a large mold requiring more than one mix should be made by mixing a series of mixes within five minutes of one another. Bonding can be accomplished on gelled MoldGel by spraying or painting Algislo on the surface of the mold material. You can also embed fiber into MoldGel to secure the shell. As soon as MoldGel is firm, mix and apply a mother mold using plaster bandages or cheesecloth and diluted plaster. When plaster shell is set, remove the mold. It is recommended that a positive casting be made within 12-hours, as MoldGel SilFree will begin to loose detail as it dries. ArtMolds offers three variations to its new formula . . . Hollywood Impressions® SILFREE with a 2-3 minute set time in 80-degree F. (27-degrees C.) water. It is tinted green and an attractive lime scented. MoldGel® SILFREE Regular Set has a 4-5 minute set time with an orange tint and a pleasant orange fragrance. Then there is MoldGel® SILFREE SloSet with a 7-8 minute set time and is blue tinted with a peppermint candy scent.\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/www.artmolds.com\/pub\/media\/blfa_files\/SDS_ArtMolds_Impression_Material-SILFREE-US-04_20_2015.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSDS\u003c\/a\u003e\u003c\/p\u003e","brand":"ArtMolds","offers":[{"title":"1lb","offer_id":48015745253691,"sku":"AM1S0101W","price":19.95,"currency_code":"USD","in_stock":true},{"title":"10lb","offer_id":48015745286459,"sku":"631210S","price":131.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/moldgel-sloset-1000px.jpg?v=1710988744"},{"product_id":"ocl-5-plaster-gauze","title":"OCL 5\" Plaster Gauze Case of 48 rolls","description":"\u003cp\u003eOCL Extra Fast Setting Plaster Bandages are economical, providing a cheap but reliable choice for casting. Plaster Bandages are designed for a very creamy texture, easily moldable and leaving a smooth finish. The Plaster of Paris formula is designed for consistent set times. Extra Fast Setting Casting Bandages have a 2 - 4 minute set time. The high moldability is ideal for making casts or negative molds for prosthetics.\u003c\/p\u003e\n\u003cp\u003eOCL plaster products feature a highly creamy texture for ease of molding. The quick wet out and consistent set time are great for making custom splints in the Emergency Department or negative molds in the O\u0026amp;P office.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCreamy texture\u003c\/li\u003e\n\u003cli\u003eFast and extra fast set time\u003c\/li\u003e\n\u003cli\u003eQuick wet out\u003c\/li\u003e\n\u003cli\u003eSmooth finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shoplightspeed.com\/shops\/606431\/files\/56917663\/ocllist.png\" alt=\"\" width=\"333\" height=\"113\"\u003e\u003c\/p\u003e","brand":"Gypsona","offers":[{"title":"Default Title","offer_id":48015867445563,"sku":"41-955X","price":290.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/oclbox.jpg?v=1713999040"},{"product_id":"chromatic-fast-set-dental-alginate-1lb","title":"Chromatic Fast Set Dental Alginate 1lb","description":"\u003cul class=\"a-unordered-list a-vertical a-spacing-mini\"\u003e\n\u003cli class=\"a-spacing-mini\"\u003e\u003cspan class=\"a-list-item\"\u003e Time in mouth: 1:00 \u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"a-spacing-mini\"\u003e\u003cspan class=\"a-list-item\"\u003e Total setting time: 2:30 \u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"a-spacing-mini\"\u003e\u003cspan class=\"a-list-item\"\u003e 48-hour dimensional stability \u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"a-spacing-mini\"\u003e\u003cspan class=\"a-list-item\"\u003e High elasticity and exceptional tear strength \u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"a-spacing-mini\"\u003e\u003cspan class=\"a-list-item\"\u003e Pleasant mint flavor \u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hygedent","offers":[{"title":"Default Title","offer_id":50029312442683,"sku":"","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/dentalalginate.jpg?v=1739654871"},{"product_id":"hand-casting8group","title":"Corporate Hand Casting \u0026 Mold Making Experience up to 8 People","description":"\u003cp\u003e\u003cstrong\u003eWant a cool thing to do with your team. This corporate event is great for small and large groups- We will mold and cast every ones hand so you get to take it home. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThis class is for people who want to learn about body casting. We will demonstrate different types of molds.\u003c\/li\u003e\n\u003cli\u003eAnd you will get a Hydrocal cast of your hand!!!!*\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eThis class is designed for team builing experiences.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eAn important step in successful mold making is being familiar with mold making materials available to you. The more you know about the materials and their characteristics, more likely the better your mold will be. Another important step is knowing the various types of molds that can be made and when to use them.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eThis class is devoted to discussion, demystifying various mold making materials such as silicone, alginate and wax, each has their own properties, inhibitions \u0026amp; characteristics; as well as advantages and disadvantages. \u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCall us to schedule your time slot!\u003c\/p\u003e\n\u003c!----\u003e","brand":"TCS Classes","offers":[{"title":"Default Title","offer_id":50817836450107,"sku":null,"price":1560.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/HANDCASTINCLASS.png?v=1725058019"},{"product_id":"400ml-electric-dispensing-gun","title":"400mL Electric Dispensing Gun","description":"\u003cp\u003eDispensing guns hold Body Double™, Dragon Skin™, and Ecoflex™ 400 ml cartridges and dispense the Parts A \u0026amp; B through a static mixing tube. Pull the trigger on the electric gun for 400 ml cartridges. The electric gun is excellent for frequent molders and larger projects.\u003c\/p\u003e","brand":"Smooth-On","offers":[{"title":"Default","offer_id":50968791974203,"sku":"99848","price":616.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/400ML-Electric-Gun-hand-1400x1050.jpg?v=1770853862"},{"product_id":"defend®-super-hydrophilic-vinyl-polysiloxane-impression-material-vps-fast-set-medium","title":"DEFEND® Super Hydrophilic Vinyl Polysiloxane Impression Material (VPS) Fast Set Medium","description":"\u003cp\u003eHigh performance (HP) cartridge system available in regular and fast set. All viscosities are available. Excellent tear strength to maintain impression integrity upon removal and precise impressions no matter what technique you use. Exceeds ISO 4380 standard which will help eliminate remakes.\u003c\/p\u003e\n\u003cp\u003e4 CARTRIDGES PER BOX\u003c\/p\u003e","brand":"The Compleat Sculptor, Inc","offers":[{"title":"Default Title","offer_id":51476781760827,"sku":"VP-9009 Special Order","price":82.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/Defend-VPSBox-1000px.jpg?v=1784318510"},{"product_id":"defend®-dispensing-gun","title":"DEFEND® Dispensing Gun","description":"\u003cp\u003eThe dispensing gun is used to extrude impression materials and bite registration materials from cartridges. It consists of a release lever and a plunger, which are coordinated simultaneously to load and remove the cartridge. The gun also consists of a trigger to dispense the material. Works with 1:1 and 2:1 cartridges.\u003c\/p\u003e\n\u003cp\u003eVP-8204- for 4:1\/10:1 Cartridge- 50ml\u003c\/p\u003e","brand":"The Compleat Sculptor, Inc","offers":[{"title":"Default Title","offer_id":51476836974907,"sku":"VP-8204 Special Order","price":76.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/VP-8202-dispensing-gun-1000px.jpg?v=1784318656"},{"product_id":"defend®-t-mix-tips-25ct","title":"DEFEND® T-Mix Tips 24pk","description":"\u003cp\u003e24 Pack\u003c\/p\u003e\n\u003cp\u003eThe dispensing gun is used to extrude impression materials and bite registration materials from cartridges. It consists of a release lever and a plunger, which are coordinated simultaneously to load and remove the cartridge. The gun also consists of a trigger to dispense the material. Works with 1 to 1 and 2 to 1 cartridges. \u003c\/p\u003e\n\u003cp\u003eVP-8204- for 4:1\/10:1 Cartridge- 50ml\u003c\/p\u003e","brand":"The Compleat Sculptor, Inc","offers":[{"title":"Default Title","offer_id":51509010956603,"sku":"#VP-8104T Special Order","price":49.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/VP-8108T-Crown-Bridge-Mixing-Tips-1000px.jpg?v=1785172369"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/collections\/bdlinehero.png?v=1702103275","url":"https:\/\/maacaffestore.com\/collections\/body-casting-materials.oembed","provider":"The Compleat Sculptor, Inc","version":"1.0","type":"link"}