{"title":"Cementitious Casting Compounds","description":"","products":[{"product_id":"a-r-chopped-fiberglass","title":"A\/R Chopped Fiberglass","description":"\u003cp\u003eAlkali Resistant (AR) Glass Fibers are designed specifically for use in concrete. They are manufactured from a specially formulated glass composition with an optimum level of Zirconia (ZrO2) to be suitable for use in concrete. AR Glass Fibers are particularly suitable for Premix GFRC and other mortar and concrete reinforcement applications. They have high tensile strength and modulus, do not rust like steel, and are easily incorporated into concrete mixes.\u003c\/p\u003e\n\u003cp\u003eOur fibers are 19mm (3\/4\") in length, with 200 filaments per strand bundle and a filament diameter of 18 microns. While the bundles are designed to resist breaking down during mixing, care must be given not to overmix. Compared to monofilament fibers (PVA, AC50), bundled fibers are more likely to be visible in finished surfaces if precautions are not taken.\u003c\/p\u003e\n\u003cp\u003eTypical load range: 3% by weight of the total mix, or 1.5-1.75 lb. (0.68-0.79 kg) per bag of Buddy Rhodes blended concrete mix.\u003c\/p\u003e\n\u003cp\u003eAll of our alkali resistant glass fiber products are manufactured in compliance with ASTM C1666\/C 1666M, EN 15422 and under recommendations of PCI and GRCA.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/msds\/files\/ARGlass_SDS.pdf\" rel=\"noopener\" target=\"_blank\"\u003eSDS\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/tb\/files\/AR%20GLASS%20FIBER%20TDS.pdf\" rel=\"noopener\" target=\"_blank\"\u003eTDS\u003c\/a\u003e\u003c\/p\u003e","brand":"Buddy Rhodes","offers":[{"title":"1lb Bag","offer_id":48014506754363,"sku":"10023977","price":13.99,"currency_code":"USD","in_stock":true},{"title":"12lb Bag","offer_id":48014506787131,"sku":"10023860","price":89.99,"currency_code":"USD","in_stock":true},{"title":"44lb Bag","offer_id":48014506819899,"sku":"10023837","price":209.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/arglassfiber-44lb-1000x1000-group-1_ee818e55-6cd7-4ece-9eef-55f01cf2d249.jpg?v=1710989595"},{"product_id":"a-r-fiberglass-mesh-300yd-x-40in-roll-10mm","title":"A\/R Fiberglass Mesh Alkali Resistant Glass Scrim","description":"\u003cp\u003eAlkali Resistant (AR) Glass Scrim is an oriented fiber fabric. Scrims are often used in conjunction with fiber reinforced mixes to provide additional tensile strength in locations that will experience point-specific strain. When they are placed in the tensile regions of the product they can significantly increase the flexural strength of the composite. More than one layer of scrim can be used for increased performance.\u003c\/p\u003e\r\n\u003cp\u003eThis scrim is produced with 10mm X 10mm (3\/8\") webbing and comes in 1 m (40”) wide rolls. It is available in lengths of 15’, 50’ and 300’ (4.6 m, 15.2 m, 91.4 m).\u003c\/p\u003e\r\n\u003cp\u003eAll of our alkali resistant glass fiber products are manufactured in compliance with ASTM C1666\/C 1666M, EN 15422 and under recommendations of PCI and GRCA.\u003c\/p\u003e","brand":"Buddy Rhodes","offers":[{"title":"15 ft x 40 in Roll","offer_id":51391084233019,"sku":"10023933","price":62.0,"currency_code":"USD","in_stock":true},{"title":"50 ft x 40 in Roll","offer_id":51391084200251,"sku":"10023893","price":120.0,"currency_code":"USD","in_stock":true},{"title":"300 ft x 40 in Roll","offer_id":51391084167483,"sku":"10023876","price":524.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/109041-arglassscrim-300ft-1000x1000-scale_316298ad-bb1d-429a-a3de-54a1c6b386f3.jpg?v=1710989917"},{"product_id":"acrylic-fiber-ac50","title":"Acrylic Fiber AC50","description":"\u003cp\u003eAcrylic AC50 Fibers are modified polymer fibers that greatly enhance the performance and durability of concrete. They drastically reduce plastic shrinkage cracking, provide secondary reinforcement and increased impact resistance.\u003c\/p\u003e\n\u003cp\u003eAcrylic AC50 Fibers are 6 mm in length and are the least visible of our fiber offerings, making them best suited for face mixes that require additional reinforcement. They also provide excellent trowelability when blended with either the Craftsman, GFRC or ECC mixes.\u003c\/p\u003e\n\u003cp\u003e\u003cimg height=\"577\" width=\"415\" alt=\"\" src=\"https:\/\/cdn.shoplightspeed.com\/shops\/606431\/files\/52348879\/ac50specs.png\"\u003e\u003c\/p\u003e\n\u003cp\u003eAcrylic AC50 fibers are monofilament and have more surface area than bundled fibers. Because of this, they can easily choke up a concrete mix if they are overdosed or not carefully blended in. Some users find blending the fibers in the mix water first provides optimal dispersion. Others prefer to slowly blend the fibers into the concrete later in the mixing process. Some experimentation is suggested to determine the best solution for a specific mix design. \u003c\/p\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" href=\"https:\/\/www.smooth-on.com\/msds\/files\/1325_%201.pdf\" target=\"_blank\"\u003eSDS\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" href=\"https:\/\/www.smooth-on.com\/tb\/files\/BUDDY_RHODES_ACRYLIC_FIBER_AC50.pdf\" target=\"_blank\"\u003eTDS\u003c\/a\u003e\u003c\/p\u003e","brand":"Buddy Rhodes","offers":[{"title":"1lb Bag","offer_id":48014515470651,"sku":"10024059","price":14.99,"currency_code":"USD","in_stock":true},{"title":"8lb Bag","offer_id":48014515503419,"sku":"10023926","price":64.99,"currency_code":"USD","in_stock":true},{"title":"40lb Bag","offer_id":48014515536187,"sku":"10023934","price":169.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/acrylicfiberac50-1000x1000-grouped-1_7b33a7f8-8647-4842-91ef-95e070b7909f.jpg?v=1741902826"},{"product_id":"smooth-on-duo-matrix-c-5-gallon","title":"duoMatrix™-C 5 Gallon","description":"\u003cp\u003e\u003cstrong\u003eduoMatrix™–C\u003c\/strong\u003e is new polymer additive that enhances the physical and performance properties of cementitious materials such as portland cements and mortars. \u003cstrong\u003eduoMatrix™–C\u003c\/strong\u003e (\u003cstrong\u003eMatrix™-C\u003c\/strong\u003e for short) eliminates the need for the usual 7-day post cure. It drastically reduces water and salt absorption and fills in micro cracks to minimize crack propagation. Other performance characteristics include greatly enhanced freeze\/thaw, ultra-violet, and chemical resistance. Higher flexural strength reduces brittleness. \u003cstrong\u003eMatrix™-G\u003c\/strong\u003e is available to enhance the performance of alpha-gypsums. \u003c\/p\u003e\r\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shoplightspeed.com\/shops\/606431\/files\/52202150\/duomatrixcmixratio.png\" alt=\"\" width=\"861\" height=\"235\"\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shoplightspeed.com\/shops\/606431\/files\/52202151\/duomatrixcspecs.png\" alt=\"\" width=\"410\" height=\"628\"\u003e\u003c\/p\u003e\r\n\u003cp\u003eFeatures\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eEasy to use and can be introduced to any aggregate mix. It is usually cast solid or mixed with chopped fiber and sprayed.\u003c\/li\u003e\r\n\u003cli\u003eCan be pigmented and improves color uniformity. \u003cstrong\u003eMatrix™-C\u003c\/strong\u003e will improve processing of GFRC, making architectural elements and concrete castings (ornamental, etc.) more durable.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003eInstructions\u003c\/p\u003e\r\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eSafety\u003c\/strong\u003e - \u003c\/em\u003eStore and use at room temperature (73°F\/23°C). These products have a limited shelf life and should be used as soon as possible. Colder temperatures will slow the working\/cure time, while warmer temperatures will reduce working times. Individual components should be stored in a dry environment at room temperature. Humid conditions will cause plaster and resin to lose effectiveness. \u003cstrong\u003eDo not latex freeze.\u003c\/strong\u003e Wear safety glasses, long sleeves and rubber gloves to minimize contamination risk.\u003c\/p\u003e\r\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eMold Preparation\u003c\/strong\u003e -\u003c\/em\u003e When solid casting \u003cstrong\u003eMatrix™-C\u003c\/strong\u003e into a rubber mold, rinse the mold with solution with any standard concrete release agent prior to each casting. This will help minimize air bubbles, facilitate demold, reduce build-up during production and give longer mold life.\u003c\/p\u003e\r\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eRequired Material\u003c\/strong\u003es\u003c\/em\u003e - Assemble all components and accessories before you begin.\u003c\/p\u003e\r\n\u003cp\u003eYou will need:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003ePortland Cement-Type 1 (White or Gray)\u003c\/li\u003e\r\n\u003cli\u003eA-R Chopped Strand * - ½” or ¾” (Do not use E Glass)\u003c\/li\u003e\r\n\u003cli\u003e\n\u003cstrong\u003eMatrix™-C\u003c\/strong\u003e Mixing Containers\u003c\/li\u003e\r\n\u003cli\u003eWater Weighing Scale (Digital Gram or Triple Beam Balance)\u003c\/li\u003e\r\n\u003cli\u003eSilica Sand (fine grade – 00 Size)\u003c\/li\u003e\r\n\u003cli\u003eMechanical \/ Power Mixer (Jiffy Mixer)NIOSH Approved Dust Mask\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e* Available from Nippon Electric Glass – 972-602-1740\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eBecause no two applications are quite the same, a small test application to determine suitability for your project is recommended if performance of this material is in question. \u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eMeasuring and Mixing -\u003c\/em\u003e \u003c\/strong\u003eTo minimize dust inhalation, we recommend that you wear a NIOSH approved dust mask while weighing and mixing components. Use only clean, dry measuring and mixing vessels and stirring utensils. Component amounts will vary depending on the size of the batch you are making.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eImportant: Components must be mixed in proper sequence. A power mixer should be used to mix all components.\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eStep 1:\u003c\/strong\u003e Combine all dry ingredients before adding liquid latex.\u003c\/p\u003e\r\n\u003cp\u003eCombine cement, sand \u0026amp; fiber into a suitable size-mixing container (If adding dry pigments or other additives, blend with dry components before adding water and \u003cstrong\u003eMatrix™-C\u003c\/strong\u003e). Mix dry components thoroughly with mixing paddle, power mixer, etc. until well blended. \u003cstrong\u003eNote: \u003c\/strong\u003eFor convenience and future use, large amounts of dry powder components can be pre-mixed and stored in a clean, dry, airtight container.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eStep 2:\u003c\/strong\u003e Shake or stir \u003cstrong\u003eMatrix™-C\u003c\/strong\u003e well, and add required amount.\u003c\/p\u003e\r\n\u003cp\u003ePre-mix\u003cstrong\u003e Matrix™-C\u003c\/strong\u003e with power mixer. Add required amount of \u003cstrong\u003eMatrix™-C\u003c\/strong\u003e and water by weight and mix all components with a power mixer until all dry powder components are thoroughly dispersed (minimum 90 seconds).\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eOptional\u003c\/strong\u003e \u003cstrong\u003e- For Better Flow, Add A Plasticizer -\u003c\/strong\u003e A plasticizer can be added to the mixture to improve the flow and reduce air bubbles. Sikament 10 (available from Sika Corp.) or Daracem 19 (available from WR Grace \u0026amp; Co.) is available worldwide and will work well with the \u003cstrong\u003eMatrix™ -C\u003c\/strong\u003e aggregate. Add 8 oz. (237 ml) of plasticizer per 100 lbs. (46 kgs.) Portland cement and mix as directed above.\u003c\/p\u003e\r\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003ePouring\u003c\/strong\u003e - \u003c\/em\u003ePour mixture in a single spot at the lowest point of mold, and let mixture seek its level. Vibrating: After pouring, vibrate mold using a vibrating table or pass-vibrating wand through mixture.\u003c\/p\u003e\r\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eCuring\u003c\/strong\u003e -\u003c\/em\u003e Let cure at room temperature for 16 hours before demolding. Colder temperatures will slow the curing process. Do not cure in temperatures below 32°F \/ 0°C. Warmer temperatures will accelerate the curing process. If curing at temperatures above 105°F \/ 32°C, castings should be covered to prevent pre-mature evaporation. This could result in surface shrinkage and cracking.\u003c\/p\u003e\r\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eAccelerating Or Slowing Matrix™-C\u003c\/strong\u003e\u003c\/em\u003e - Accelerating or slowing the cure of Matrix™-C may be achieved with conventional ad mixtures (such as Daraccel accelerator or Daratard 17 retarder from WR Grace. Sika Rapid 1 accelerator or Plastiment retarder is also suitable).\u003c\/p\u003e\r\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eMeasuring Proportions \/ GFRC Spray\u003c\/strong\u003e\u003c\/em\u003e - For making large architectural panels or for covering large areas, \u003cstrong\u003eMatrix™-C\u003c\/strong\u003e can be sprayed using standard spray equipment (normally used to spray cementitious materials). \u003cstrong\u003eMatrix™-C\u003c\/strong\u003e is applied in 2 steps. It is mixed as directed below and is then poured into the spray gun “hopper” where it is forced through the spray equipment and out the spray nozzle.\u003c\/p\u003e\r\n\u003cp\u003eTo minimize dust inhalation, we recommend that you wear a NIOSH approved dust mask while weighing and mixing components. Weigh materials in proper proportion as accurately as possible.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eStep 1:\u003c\/strong\u003e Apply a surface coat without fiber. Mix as indicated below WITHOUT FIBER and spray mold surface.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eStep 2:\u003c\/strong\u003e Immediately follow with Fiber Mix Coat as indicated below.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eAdding Color\u003c\/strong\u003e - Standard concrete powder pigments can be added at any time during the mix. Experimentation may be required to achieve desired colors.\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/msds\/files\/Duomatrix_G.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSDS\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/tb\/files\/DUO-MATRIX_C.pdf\" target=\"_blank\" rel=\"noopener\"\u003eTDS\u003c\/a\u003e\u003c\/p\u003e","brand":"Smooth-On","offers":[{"title":"Default","offer_id":48014562230587,"sku":"94170A","price":230.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/DuoMatrix-C-5-Gallon-hand-1400x1050.jpg?v=1748703857"},{"product_id":"quikrete-sand-mix-10lb","title":"Quikrete Sand Mix 10lb","description":"\u003cp\u003eBlend of portland cement and graded sand for pouring overlays less than 2\" thick, patching and topping chipped concrete surfaces or laying flagstone and paving bricks, bases or sculpture applications.\u003c\/p\u003e","brand":"The Compleat Sculptor, Inc","offers":[{"title":"Default","offer_id":48014693925179,"sku":"63811031","price":13.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/039645110317.jpg?v=1710976735"},{"product_id":"vertical-mix-50lb-bag","title":"Vertical Mix™ 34lb bag","description":"\u003cdiv aria-hidden=\"false\" role=\"tabpanel\" data-role=\"content\" id=\"description\" aria-labelledby=\"tab-label-description\" class=\"data item content\"\u003e\n\u003cp\u003eWARNING - Prop. 65\u003c\/p\u003e\n\u003cul class=\"messages\"\u003e\n\u003cli class=\"notice-msg\"\u003e\n\u003cul\u003e\n\u003cli\u003eIMPORTANT: You Must Use\n\u003cdiv\u003eRAMP™ Adhesion and Cure Promoter\u003c\/div\u003e\nwith the Buddy Rhodes Vertical Mix™.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBuddy Rhodes Vertical Mix™ is an easy-to-use carveable cement-based overlay that is easy to mix and apply onto vertical surfaces for creating various textures by carving, sculpting or stamping. This lightweight, zero slump formula is used for creating themed environments, zoos \u0026amp; aquarium displays, decorative panels and public sculpture. With Buddy Rhodes’ extensive line of pigments, the color possibilities are endless. Buddy Rhodes Glazes can also be applied to the cured concrete to achieve a variety of color effects. Buddy Rhodes offers the only Vertical Mix available that has been tested and certified E-84 Class A flame-resistant.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e• Non-Toxic: Animal Friendly, No VOC’s and Water Based\u003c\/li\u003e\n\u003cli\u003e• Flame Rated: Certified to the highest ASTM fire rating; E-84 Class A\/1\u003c\/li\u003e\n\u003cli\u003e• Easy to Use \u0026amp; Versatile: Mix, apply, carve and texture quickly over a variety of surfaces; easily colored with Buddy Rhodes Pigments \u0026amp; Glazes\u003c\/li\u003e\n\u003cli\u003e• Economical: Build large, lightweight, thin structures at a fraction of the cost\u003c\/li\u003e\n\u003cli\u003e• Lightweight: Up to 30% lighter than other concrete mixes with better coverage per bag.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli class=\"doc\"\u003e\n\u003cdiv data-count=\"3\"\u003e\u003ca class=\"infodoc\" href=\"https:\/\/www.smooth-on.com\/tb\/files\/VERTICAL_MIX_TB.pdf\" target=\"_blank\"\u003e\u003cspan\u003eDownload Vertical Mix Technical Bulletin\u003c\/span\u003e\u003c\/a\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli class=\"doc\"\u003e\n\u003cdiv data-count=\"4\"\u003e\u003ca class=\"infodoc\" href=\"https:\/\/www.smooth-on.com\/tb\/files\/espanol\/BUDDY_RHODES_VERTICAL_MIX_TB_ESPANOL.pdf\" target=\"_blank\"\u003e\u003cspan\u003eFicha Técnica en Español\u003c\/span\u003e\u003c\/a\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli class=\"doc\"\u003e\n\u003cdiv data-count=\"5\"\u003e\u003ca class=\"infodoc\" href=\"https:\/\/www.smooth-on.com\/assets\/pdf\/Buddy_Rhodes_Vertical_Mix_E84_Class_A_Flame_Rating_Certification_0112022.pdf\" target=\"_blank\"\u003e\u003cspan\u003eDownload Vertical Mix E84 Flame Rating Certification\u003c\/span\u003e\u003c\/a\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli class=\"doc\"\u003e\n\u003cdiv data-count=\"6\"\u003e\u003ca class=\"infodoc\" href=\"https:\/\/www.smooth-on.com\/msds\/files\/1813_1_BR_VERTICAL_MIX.pdf\" target=\"_blank\"\u003e\u003cspan\u003eDownload Vertical Mix SDS\u003c\/span\u003e\u003c\/a\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli class=\"doc\"\u003e\n\u003cdiv data-count=\"7\"\u003e\u003ca class=\"infodoc\" href=\"https:\/\/www.smooth-on.com\/tb\/files\/BR_RAMP_TB.pdf\" target=\"_blank\"\u003e\u003cspan\u003eDownload RAMP Mix Technical Bulletin\u003c\/span\u003e\u003c\/a\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli class=\"doc\"\u003e\n\u003cdiv data-count=\"8\"\u003e\u003ca class=\"infodoc\" href=\"https:\/\/www.smooth-on.com\/msds\/files\/1219_1_BR_RAMP.pdf\" target=\"_blank\"\u003e\u003cspan\u003eDownload RAMP SDS\u003c\/span\u003e\u003c\/a\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Buddy Rhodes","offers":[{"title":"Default","offer_id":48015134097723,"sku":"10028754","price":35.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/115258-verticalmix-50lb-1000x1000-1-1.jpg?v=1710981485"},{"product_id":"bone-paste-plus-8lb-pail","title":"Bone Paste Plus 8lb Pail","description":"\u003cdiv aria-hidden=\"false\" role=\"tabpanel\" data-role=\"content\" id=\"description\" aria-labelledby=\"tab-label-description\" class=\"data item content\"\u003e\n\u003cp\u003eWARNING - Prop. 65\u003c\/p\u003e\n\u003cp\u003eBone Paste Plus is a blend of cement, pozzolan, and polymer that is specially formulated to create a slurry for filling voids in artisan cast concrete. The paste doesn’t have any large particles, so it is soft and smooth, allowing it to easily fill holes and voids. The only necessary additive for the Bone Paste Plus is water, as it already has polymer blended into the formula. Pigment can be added to achieve whatever the desired color shade is.\u003c\/p\u003e\n\u003cp\u003eAdd between 1\/4 and 1\/3 cup of water per 1 cup of Bone Paste Plus and mix to a yogurt-like consistency. When pigmenting with a color from the Buddy Rhodes Signature Collection™, add approximately 1.5 teaspoons of pigment to 1 cup of Bone Paste Plus.\u003c\/p\u003e\n\u003cp\u003eBone Paste Plus does not contain any sand. This means it will produce a different surface and color finish than the base concrete. When filling larger voids, you can add 1 part fine sand to 1 part Bone Paste Plus to reduce shrinkage cracks.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cul\u003e\n\u003cli class=\"doc\"\u003e\n\u003cdiv data-count=\"1\"\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/msds\/files\/1216_%201.pdf\" class=\"infodoc\" target=\"_blank\"\u003e\u003cspan\u003eDownload SDS\u003c\/span\u003e\u003c\/a\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli class=\"doc\"\u003e\n\u003cdiv data-count=\"2\"\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/tb\/files\/BUDDY%20RHODES%20BONE%20PASTE%20PLUS%20TDS.pdf\" class=\"infodoc\" target=\"_blank\"\u003e\u003cspan\u003eDownload Technical Bulletin\u003c\/span\u003e\u003c\/a\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Buddy Rhodes","offers":[{"title":"Default","offer_id":48015137079611,"sku":"10023867","price":41.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/bone-paste-plus-8lb-pail.jpg?v=1710981516"},{"product_id":"gfrc-blended-mix-50lb-bag","title":"GFRC Blended Mix 50lb bag","description":"\u003cp\u003eWARNING - Prop. 65\u003c\/p\u003e\n\u003cp\u003eOur GFRC Preblended Concrete Mix can be sprayed, poured, pressed, or troweled. Fibers are not preblended into our GFRC mix, so that you can select the fiber combination and load rate that suits your needs. There are also no larger aggregates in the mix, making it an ideal base to add decorative aggregates to, or to build a specific custom recipe from. The mix can be used to create many different looks; from a clean, almost machined finish to one with beautiful depth and movement.\u003c\/p\u003e\n\u003cp\u003eGFRC Preblended uses all white ingredients, naturally curing to a bone white. The mix can be pigmented with any of the Buddy Rhodes Color Wheel™ color collections. The mix has all the necessary high-performance ingredients preblended, including curing polymer, such that only water and necessary reinforcement need to be added. The workability of the mix can be changed with the addition of our series of water reducers. AR Glass fibers are often used as primary reinforcement in this mix.\u003c\/p\u003e\n\u003cp\u003e\u003cimg height=\"655\" width=\"402\" alt=\"\" src=\"https:\/\/cdn.shoplightspeed.com\/shops\/606431\/files\/54566899\/gfrcspecs.png\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCOVERAGE AND CEMENT CONTENT\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis mix is typically made at 0.75” - 1” thick. This mix is often cast at ½” thick for objects like tiles, but consideration must be given in the handling and support of the piece.\u003c\/p\u003e\n\u003cul style=\"list-style-type: square;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e One bag covers +\/- 5 ft\u003csup\u003e2\u003c\/sup\u003e at 1” thick. One bag produces +\/- 30 ft\u003csup\u003e2\u003c\/sup\u003e of mist\/face coat when sprayed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal Cementitious Binder\u003c\/strong\u003e (per 50 lb bag): 26 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg height=\"277\" width=\"965\" alt=\"\" src=\"https:\/\/cdn.shoplightspeed.com\/shops\/606431\/files\/54566898\/gfrcrecipes.png\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" href=\"https:\/\/www.smooth-on.com\/msds\/files\/1202_2_GFRC%20BLENDED%20MIX_ARTISAN%2010LB.pdf\" target=\"_blank\"\u003eSDS\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" href=\"https:\/\/www.smooth-on.com\/tb\/files\/BUDDY_RHODES_GFRC_MIX_TB.pdf\" target=\"_blank\"\u003eTDS\u003c\/a\u003e\u003c\/p\u003e","brand":"Buddy Rhodes","offers":[{"title":"Default","offer_id":48015158182203,"sku":"10023836","price":44.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/109001-gfrcmix-50lb-1000x1000-2.jpg?v=1710981683"},{"product_id":"craftsman-mix-50lb-bag","title":"Craftsman Mix 50lb bag","description":"\u003cdiv aria-hidden=\"false\" role=\"tabpanel\" data-role=\"content\" id=\"description\" aria-labelledby=\"tab-label-description\" class=\"data item content\"\u003e\n\u003cp\u003eWARNING - Prop. 65\u003c\/p\u003e\n\u003cp\u003eThis is the enhanced version of Buddy's original concrete countertop concrete mix. It is an artisan concrete blend designed to exhibit clay-like properties in the wet state. The consistency of the mix lends itself to use with Buddy’s signature press technique, applying up vertical surfaces with minimal molding and simplicity of application. This mix is also ideal for troweling and can be plasticized to create a castable mix.\u003c\/p\u003e\n\u003cp\u003eThe mix uses all white ingredients, naturally curing to a bone white. It can be pigmented using any of the Buddy Rhodes Color Wheel™ color collections.\u003c\/p\u003e\n\u003cp\u003eThe mix has all of the necessary high-performance ingredients pre-blended, including curing polymer, such that only water and necessary reinforcement need to be added. The workability of the mix can be changed with the addition of our series of water reducers. Primary reinforcement can be achieved using our series of reinforcing fibers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCOVERAGE AND CEMENT CONTENT\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis mix is typically cast at 1.25” - 1.5” thick. It can be cast thinner, particularly with the use of AR Glass Fibers in the backer mix, but consideration must be given in the handling and support of the piece.\u003c\/p\u003e\n\u003cul style=\"list-style-type: square;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e +\/- 5 sq. ft. at 1” thick.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal Cementitious Binder\u003c\/strong\u003e (per 50 lb bag): 20.5 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/msds\/files\/1203_2_CRAFTSMAN%20BLENDED%20MIX_REV.pdf\" rel=\"noopener\" target=\"_blank\"\u003eSDS\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/tb\/files\/BUDDY_RHODES_CRAFTSMAN_MIX_TB.pdf\" rel=\"noopener\" target=\"_blank\"\u003eTDS\u003c\/a\u003e\u003c\/p\u003e","brand":"Buddy Rhodes","offers":[{"title":"Default","offer_id":48015158346043,"sku":null,"price":44.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/109003-craftsmanmix-50lb-1000x1000-1.jpg?v=1710981688"},{"product_id":"penetrating-sealer-22lb","title":"Penetrating Sealer 2.2lb","description":"\u003cp\u003eBuddy Rhodes Penetrating Sealer is an aqueous copolymer chemically reactive dispersion that provides a durable and transparent protective barrier against oil and water on concrete surfaces. This new chemistry offers invisible protection to both dense and porous concrete and is extremely effective as a water sealer. It is used as a primer for the first step in the Buddy Rhodes sealing system, followed by the BR Satin Sealer, and the BR Beeswax.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCoverage:\u003c\/strong\u003e One quart of BR Penetrating Sealer will cover approximately 100 ft2. This may vary from application to application.\u003c\/p\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" href=\"https:\/\/www.smooth-on.com\/msds\/files\/1214_%201.pdf\" target=\"_blank\"\u003eSDS\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" href=\"https:\/\/www.smooth-on.com\/tb\/files\/BUDDY%20RHODES%20SEALING%20SYSTEM%20INSTRUCTIONS.pdf\" target=\"_blank\"\u003eInstructions\u003c\/a\u003e\u003c\/p\u003e","brand":"Buddy Rhodes","offers":[{"title":"Default","offer_id":48015234695483,"sku":"10033999","price":97.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/br-penetrating-sealer-opt-72547143516825310801080.jpg?v=1710983241"},{"product_id":"satin-sealer-22lb","title":"Satin Concrete Sealer Quart 2.2lb","description":"\u003cp\u003e\u003cstrong\u003eKeep From Freezing\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBuddy Rhodes Satin Sealer is the latest in water based acrylic micro emulsion technology for concrete countertops. It creates a barrier coating that seals and protects while enhancing the natural beauty of the concrete. The sealer will resist most stains up to 72 hours, however, oils and solvents should be wiped up promptly. This is the second step in the Buddy Rhodes sealing system, preceded by the BR Penetrating Sealer and followed by the BR Beeswax.\u003c\/p\u003e\n\u003cp\u003eCoverage: \u003cbr\u003eOne quart of Satin Sealer will cover approximately 50 ft2. This may vary from application to application.\u003c\/p\u003e\n\u003cp\u003eFor Use On\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAll concrete and masonry surfaces\u003c\/li\u003e\n\u003cli\u003eExposed aggregate\u003c\/li\u003e\n\u003cli\u003eStamped and colored concrete\u003c\/li\u003e\n\u003cli\u003eNatural and manufactured stone brick\u003c\/li\u003e\n\u003cli\u003eConcrete paver tiles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLimitations: Not recommended for marble, granite, or porcelain.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/msds\/files\/1211_1.pdf\" rel=\"noopener\" target=\"_blank\"\u003eSDS\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/tb\/files\/BUDDY%20RHODES%20SEALING%20SYSTEM%20INSTRUCTIONS.pdf\" rel=\"noopener\" target=\"_blank\"\u003eInstructions\u003c\/a\u003e\u003c\/p\u003e","brand":"Buddy Rhodes","offers":[{"title":"Default","offer_id":48015234728251,"sku":"10023855","price":66.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/satin-sealer-quart-opt-16509143516498710801080-1-1.jpg?v=1710983243"},{"product_id":"ecc-blended-mix-50lb-bag","title":"ECC Blended Mix 50lb bag","description":"\u003cdiv class=\"data item content\" aria-labelledby=\"tab-label-description\" id=\"description\" data-role=\"content\" role=\"tabpanel\" aria-hidden=\"false\"\u003e\n\u003cp\u003eWARNING - Prop. 65\u003c\/p\u003e\n\u003cp\u003eThe most advanced concrete mix design available is ECC (Engineered Cementitious Composite). This mix was originally developed for use in seismic zones for its high ductility. It has been modified to improve the mix characteristics while maintaining performance. The strength of our ECC recipes comes from the combination of particle gradation and the addition of a high dosage of fiber. From a creative standpoint, ECC can be mixed to unique workabilities, allowing for many variations in finish. While this mix takes some getting used to, the professionals that use it swear by its vast aesthetic and performance potential. It is very strong, it will bend before it breaks, and it produces unrivaled finishes and durability.\u003c\/p\u003e\n\u003cp\u003eECC uses all white ingredients, naturally curing to a bone white. The mix can be pigmented with any of the Buddy Rhodes Color Wheel™ color collections.. The mix has all of the necessary high-performance ingredients preblended, including curing polymer, such that only water and necessary reinforcement need to be added. The workability of the mix can be changed with the addition of our series of water reducers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCOVERAGE AND CEMENT CONTENT\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis mix is typically done at 0.75” - 1” thick. This mix is often cast at 3\/8” thick for objects like tiles, but considerations must be given in the handling and support of the piece.\u003c\/p\u003e\n\u003cul style=\"list-style-type: square;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e One Bag covers +\/- 5 sq. ft at 1” thick.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal Cementitious Binder\u003c\/strong\u003e (per 50 lb bag): 28.45 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cul\u003e\n\u003cli class=\"doc\"\u003e\n\u003cdiv data-count=\"3\"\u003e\n\u003cdiv\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/tb\/files\/BUDDY_RHODES_ECC_MIX_TB.pdf\" class=\"infodoc\" target=\"_blank\"\u003e\u003cspan\u003eDownload Technical Bulletin\u003c\/span\u003e\u003c\/a\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli class=\"doc\"\u003e\n\u003cdiv data-count=\"4\"\u003e\n\u003cdiv\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/msds\/files\/1205_2_ECC%20BLENDED%20MIX.pdf\" class=\"infodoc\" target=\"_blank\"\u003e\u003cspan\u003eDownload SDS\u003c\/span\u003e\u003c\/a\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Buddy Rhodes","offers":[{"title":"Default","offer_id":48015239053627,"sku":"10023840","price":48.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/109005-eccmix-50lb-1000x1000-1.jpg?v=1710983355"},{"product_id":"stamp-and-roller-release","title":"Stamp and Roller Release","description":"\u003cp\u003eBuddy Rhodes Stamp and Roller Release is a bubble gum scented solvent release agent that aids in texturing Buddy Rhodes™ Vertical Mix by preventing the concrete sticking to texture stamps or rollers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBenefits\/Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCreates a good barrier between tools and concrete\u003c\/li\u003e\n\u003cli\u003eEvaporates and leaves behind no residue\u003c\/li\u003e\n\u003cli\u003eEconomical\u003c\/li\u003e\n\u003cli\u003eEasy to use\u003c\/li\u003e\n\u003cli\u003ePleasant bubble gum scent\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eUsage\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhile the mix is in the plastic state, Buddy Rhodes Vertical Mix can be easily stamped or textured. Pour Stamp and Roller Release into a clean spray bottle or pump sprayer. Apply a fine mist of release directly to texture stamp or roller prior to pressing into the soft concrete surface. It can be used with both silicone and polyurethane stamps. Stamp and Roller Release may damage the spray mechanisms in some spray bottles. Test to ensure suitability. Clean texture tools with dishwashing soap and water after use to prevent damage, especially to polyurethanes. Do not attempt to thin Buddy Rhodes Stamp and Roller Release with other materials.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConditions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor best results store and use at 73ºF\/23ºC.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli class=\"doc\"\u003e\n\u003cdiv data-count=\"1\"\u003e\n\u003cdiv\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/msds\/files\/BUDDY%20RHODES%20STAMP%20AND%20ROLLER%20RELEASE_REV.1.pdf\" class=\"infodoc\" target=\"_blank\"\u003e\u003cspan\u003eDownload SDS\u003c\/span\u003e\u003c\/a\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli class=\"doc\"\u003e\n\u003cdiv data-count=\"2\"\u003e\n\u003cdiv\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/tb\/files\/BUDDY_RHODES_STAMP_AND_ROLLER_RELEASE_TDS.pdf\" class=\"infodoc\" target=\"_blank\"\u003e\u003cspan\u003eTechnical Bulletin\u003c\/span\u003e\u003c\/a\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Buddy Rhodes","offers":[{"title":"Pint","offer_id":48015700918587,"sku":"10029410","price":15.0,"currency_code":"USD","in_stock":true},{"title":"Gallon","offer_id":48015700951355,"sku":"10029461","price":34.0,"currency_code":"USD","in_stock":true},{"title":"5 Gallon","offer_id":48015700984123,"sku":"10029462","price":127.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/stamp-and-roller-release-1000x1000-grouped-1.jpg?v=1713544208"},{"product_id":"forton-vf-774-5-gallon","title":"Forton VF-774 5 Gallon","description":"\u003cp\u003e\u003c\/p\u003e\u003cdiv style=\"position: relative;\"\u003e\n\u003cimg style=\"width: 100%; height: auto;\" src=\"https:\/\/cdn.shoplightspeed.com\/shops\/606431\/files\/52221791\/forton774specs.png\"\u003e\r\n\u003cdiv style=\"position: absolute; top: 50%; left: 50%; transform: translate(-50%, -50%); background-color: rgba(0,0,0,0.5); padding: 10px; display: none;\"\u003e\u003cimg style=\"width: auto; height: 100%;\" src=\"https:\/\/cdn.shoplightspeed.com\/shops\/606431\/files\/52221791\/forton774specs.png\"\u003e\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp\u003eFeatures\u003c\/p\u003e\r\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eThe Primary Benefits of Using Forton™ VF-774 are:\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\r\n\u003cp\u003e• \u003cstrong\u003eElimination of the seven day wet cure\u003c\/strong\u003e required to achieve the maximum strengths of the GFRC composite.\u003c\/p\u003e\r\n\u003cp\u003e• Significant improvements in the long-term durability of the GFRC composite, especially the \u003cstrong\u003emaintenance of the long-term flexural strain to failure property, i.e. ductility of the composite.\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shoplightspeed.com\/shops\/606431\/files\/52221790\/forton774mixratio.png\" alt=\"\" width=\"783\" height=\"281\"\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eOther Advantages to Using Forton™ VF-774:\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\r\n\u003cp\u003e• \u003cstrong\u003eImproved workability\u003c\/strong\u003e of the mix at low water\/cement ratios, further enhancing the strength of the cured cement matrix.\u003c\/p\u003e\r\n\u003cp\u003e• \u003cstrong\u003eEasy spraying of vertical surfaces\u003c\/strong\u003e without having the face mix sag.\u003c\/p\u003e\r\n\u003cp\u003e• \u003cstrong\u003eComplete dispersion of iron oxide pigments\u003c\/strong\u003e for batch-to-batch color consistency of face mixes.\u003c\/p\u003e\r\n\u003cp\u003e• \u003cstrong\u003eUV stability of the Forton™ polymer\u003c\/strong\u003e means architectural finishes maintain their “as produced” colors.\u003c\/p\u003e\r\n\u003cp\u003e• \u003cstrong\u003eHard cured face mixes\u003c\/strong\u003e for better sand blasting uniformity.\u003c\/p\u003e\r\n\u003cp\u003e• \u003cstrong\u003eTighter, denser cured product,\u003c\/strong\u003e which reduces absolute moisture absorption and vapor permeability while at the same time significantly reducing the rate of absorption as a function of time.\u003c\/p\u003e\r\n\u003cp\u003e• \u003cstrong\u003eElimination of crazing and spider cracking\u003c\/strong\u003e in the face mix due to the soft polymer particles in between the cement particle and the sand grain.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003ePCI Compliance:\u003c\/em\u003e Forton™ VF-774\u003c\/strong\u003e complies with Appendix G of MNL 130, the Manual for Quality Control for Glass Fiber Reinforced Concrete Products from the PCI for the elimination of the seven day wet cure.\u003c\/p\u003e\r\n\u003cp\u003eInstructions\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eHANDLING \u0026amp; STORAGE \u003c\/em\u003e- Forton™ VF-774\u003c\/strong\u003e is supplied in 5-gallon pails (40 lbs\/18 kgs), 55-gallon drums (480 lbs\/218 kgs) and totes (2,300 lbs\/1,043 kgs). \u003cstrong\u003eVF-774 should not be allowed to freeze.\u003c\/strong\u003e Recommended storage temperature range: 50°F - 100°F (10°C - 38°C). \u003cstrong\u003eVF-774\u003c\/strong\u003e should be stored in closed containers out of direct sun light and away from direct sources of heat.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eSHELF LIFE\u003c\/em\u003e \u003c\/strong\u003e- Shelf life of \u003cstrong\u003eVF-774\u003c\/strong\u003e is one year in unopened containers when properly stored. Smooth-On cannot guarantee shelf life of opened or repackaged units. Important: This product has limited shelf life. Use as soon as possible after opening.\u003c\/p\u003e\r\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003ePRE-MIXING\u003c\/strong\u003e \u003c\/em\u003e- \u003cstrong\u003eVF-774\u003c\/strong\u003e can separate over time in storage or transit as evidenced by caramel liquid on the surface. Gently stir with a paddle for 30 seconds. Pre-mixing one time per 24 hour usage cycle is recommended.\u003c\/p\u003e\r\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eMEASURING \u0026amp; MIXING\u003c\/strong\u003e \u003c\/em\u003e- Assemble all components and accessories before you begin.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eRequired Materials:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003ePortland Cement, Type I (White or Gray)\u003c\/li\u003e\r\n\u003cli\u003eSilica Sand (washed, graded, dried. 0 Retention on 20 mesh sieve)\u003c\/li\u003e\r\n\u003cli\u003e\u003cstrong\u003eForton™ VF-774\u003c\/strong\u003e\u003c\/li\u003e\r\n\u003cli\u003eWater\u003c\/li\u003e\r\n\u003cli\u003ePlasticizer (see recommendation based in Technical Bulletin)\u003c\/li\u003e\r\n\u003cli\u003eAR Glass Fiber (see recommendation based in Technical Bulletin).\u003cstrong\u003e Important:\u003c\/strong\u003e \u003cstrong\u003eDo not use “E” Glass\u003c\/strong\u003e\n\u003c\/li\u003e\r\n\u003cli\u003ePigments - UV Stable, Iron Oxide (liquid or dry, if required)\u003c\/li\u003e\r\n\u003cli\u003eWeighing Scales- with digital gram accuracy (do not use postal scale, dietary scale, etc.)\u003c\/li\u003e\r\n\u003cli\u003eMechanical \/ Power Mixer: 5 - 10 hp vertical high shear mixer or CS Unitec handheld MG120, MG140 or MG160 blades\u003c\/li\u003e\r\n\u003cli\u003eNIOSH Approved Dust Mask to minimize dust inhalation while using components\u003c\/li\u003e\r\n\u003cli\u003eMixing Containers\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eImportant: Components should be mixed in proper sequence. Standard concrete mixers may be used, but it is recommended to use a high shear mixer specially designed for GFRC to ensure a thoroughly mixed, lump free slurry is produced.\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eStep 1: \u003c\/strong\u003eWeigh or batch all materials.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eStep 2: \u003c\/strong\u003eAdd all liquids, including\u003cstrong\u003e VF-774\u003c\/strong\u003e and 2 oz. of plasticizer, to mixer.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eStep 3: \u003c\/strong\u003eStart mixer on slow (300-500 rpm).\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eStep 4:\u003c\/strong\u003e Add pigment if used.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eStep 5: \u003c\/strong\u003eAdd sand.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eStep 6:\u003c\/strong\u003e Add cement and increase mixer speed to high (1,000-1,800 rpm).\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eStep 7:\u003c\/strong\u003e Mix for 1 - 2 minutes.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eStep 8:\u003c\/strong\u003e Add the remaining plasticizer to achieve desired workability.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eStep 9:\u003c\/strong\u003e Reduce mixer speed to slow (300-500 rpm) and gradually add fiber (Premix only) until dispersed (typically not more than one minute).\u003cstrong\u003e Important: Mixing too long or at too high a speed after fiber has been added can filamentize or damage the fiber, resulting in placement issues and reduced strengths.\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eAPPLYING A RELEASE AGENT - \u003c\/strong\u003e\u003c\/em\u003eCommon mold materials include mold rubber, melamine coated board and birch faced plywood or FRP with tooling resin gel coat. Use a high quality release agent meant for releasing architectural concrete such as Crete-Lease 20 VOC to release GFRC castings from the mold.\u003c\/p\u003e\r\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eCasting -\u003c\/strong\u003e \u003c\/em\u003ePour mixture in a single spot at the lowest point of mold, and let mixture seek its level. Vibrating: After casting, consolidate the slurry and remove entrapped air using a vibrating table or hand vibrator.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eSpraying -\u003c\/em\u003e For higher volume \u003c\/strong\u003eof smaller parts or making large cladding panels, GFRC slurry can be sprayed into molds using rotor\/stator or peristaltic pumps specifically designed for GFRC. Regardless of spray pump used, a face coat without fiber is typically applied first. After the face coat has properly stiffened, a fiber backup mix is applied in multiple passes, with proper compaction following each pass. For low volume application - A hopper gun (Kraft EZY Deck Pro is recommended) can be used to apply face mix. GFRC back up mix can be applied by hand.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eCuring -\u003c\/em\u003e \u003c\/strong\u003eAfter placement, cover GFRC with plastic tarp \/ sheeting to prevent excessive moisture loss and maintain heat of hydration to ensure a proper initial cure. Let cure in the mold for 12-16 hours. Curing temperatures should be maintained above 50°F\/10°C in order to ensure proper film forming of the \u003cstrong\u003eVF-774\u003c\/strong\u003e.\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/msds\/files\/1067_1.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSDS\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/tb\/files\/20_Year_Durability_Paper.pdf\" target=\"_blank\" rel=\"noopener\"\u003e20 Year Durability Paper\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/tb\/files\/Forton_VF_774_TB.pdf\" target=\"_blank\" rel=\"noopener\"\u003eINSTRUCTIONS\/TDS\u003c\/a\u003e\u003c\/p\u003e","brand":"Smooth-On","offers":[{"title":"Default","offer_id":48015747842363,"sku":"37170A","price":164.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/vf774.jpg?v=1748562859"},{"product_id":"ramp-adhesion-and-cure-promoter","title":"RAMP™ Adhesion And Cure Promoter","description":"\u003cp\u003eRAMP™ is a low viscosity liquid polymer adhesion and cure promoter developed specifically to be used with the Buddy Rhodes Vertical Mix™ carvable concrete. Adding RAMP™ ensures proper cure of Vertical Mix and improved the overall physical properties. It also reduces water and salt absorption and greatly enhances freeze\/thaw resistance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePreparation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis product has a limited shelf life and should be used as soon as possible. KEEP FROM FREEZING. Store and use at room temperature (73° F \/ 23° C). Wear long sleeves and disposable vinyl gloves in a well-ventilated area when using this product.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUse as an Adhesion Promoter\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eApply a primer coat of RAMP™ before mixing and applying Buddy Rhodes Vertical Mix™ carvable concrete. Mix 100 parts RAMP™ with 100 parts water (50\/50). Apply over all surfaces using a spray bottle, pump sprayer, or similar. Allow to become tacky before applying Vertical Mix. If primer dries completely, reapply and wait until tacky before proceeding.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUse as a Cure Promoter \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg height=\"539\" width=\"1148\" alt=\"\" src=\"https:\/\/cdn.shoplightspeed.com\/shops\/606431\/files\/52348748\/rampratiomix.png\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" href=\"https:\/\/www.smooth-on.com\/msds\/files\/1219_1_BR_RAMP.pdf\" target=\"_blank\"\u003eRAMP SDS\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" href=\"https:\/\/www.smooth-on.com\/tb\/files\/BR_RAMP_TB.pdf\" target=\"_blank\"\u003eRAMP TDS\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" href=\"https:\/\/www.smooth-on.com\/msds\/files\/1813_1_BR_VERTICAL_MIX.pdf\" target=\"_blank\"\u003eVERTICAL MIX SDS\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" href=\"https:\/\/www.smooth-on.com\/tb\/files\/VERTICAL_MIX_TB.pdf\" target=\"_blank\"\u003eVERTICAL MIX TDS\u003c\/a\u003e\u003c\/p\u003e","brand":"Buddy Rhodes","offers":[{"title":"1\/2 Gallon (3.25lbs)","offer_id":48015749120315,"sku":"10046761","price":28.0,"currency_code":"USD","in_stock":false},{"title":"1 Gallon (6.50lbs)","offer_id":48015749153083,"sku":"10029108","price":48.0,"currency_code":"USD","in_stock":false},{"title":"5 Gallon (42.50lbs)","offer_id":48015749185851,"sku":"10029109","price":200.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/ramp-1000x1000-1.jpg?v=1713544170"},{"product_id":"kwixset-anchoring-cement","title":"Kwixset Anchoring Cement","description":"\u003cp\u003e\u003cstrong\u003eKwixset is a fast-setting, weatherproof hydraulic expansion cement – the exterior counterpart to Rockite. Mixes with water, initially sets within 15-20 minutes, and within one hour sets stronger than concrete. Great for patching concrete and brick, and anchoring bolts, screws, balustrades, gates, fencing, railings, and more.\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eWarning:\u003c\/strong\u003e Kwixset has very strong expansion properties which generate the high tensile loads that can be achieved. Therefore, we do not recommend its use in hollow bricks, concrete block, limestone, or granite. Always leave at least 4 inches from the edge of the concrete to the hole.\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eJust add water\u003c\/li\u003e\r\n\u003cli\u003eInitially sets in 15-20 minutes\u003c\/li\u003e\r\n\u003cli\u003eSelf-leveling\u003c\/li\u003e\r\n\u003cli\u003eTakes stress loading in two hours\u003c\/li\u003e\r\n\u003cli\u003eMinimal waste: mix Rockite\/Kwixset as you require it\u003c\/li\u003e\r\n\u003cli\u003eIndefinite shelf life\u003c\/li\u003e\r\n\u003cli\u003eRockite will set below freezing, down to 25°F \/ -4°C\u003c\/li\u003e\r\n\u003cli\u003eKwixset will set down to 39°F \/ 4°C\u003c\/li\u003e\r\n\u003cli\u003eEasy, economical, and safe to use\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003eKwixset makes quick work of repairing holes and cracks in walls, ceilings, and interior floors. A patch or plug of Kwixset locks itself into place by expanding within the void, and will not crack or let go when subjected to normal heat or pressure. Kwixset should be placed at above freezing temperatures.\u003c\/p\u003e\r\n\u003cp\u003eConveniently packaged in 25 lb\/11.3 kg and 50 lb\/22.7 kg packages, Kwixset meets every need from the DIY project to the stern realities of plant maintenance. Mixing Kwixset is an easy job for even the most inexperienced person – merely add water until you get the proper consistency for the job at hand.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eHow to Mix\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003ePour enough Kwixset for the job at hand into a clean container. Don’t mix more than can be applied in ten minutes. Setting time may vary depending on the temperature. Gradually add water until the desired consistency is reached. DO NOT USE MORE WATER THAN DESCRIBED BELOW:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\n\u003cstrong\u003eFluid Consistency\u003c\/strong\u003e for pouring requires 4 oz of water per pound of Kwixset; stir the mix as water is added. Final consistency should be a thick paste similar to pancake batter. Add more Kwixset if the mixture is too watery.\u003c\/li\u003e\r\n\u003cli\u003e\n\u003cstrong\u003ePlastic Consistency\u003c\/strong\u003e for troweling requires about 3.5 oz of water per pound of Kwixset. Work the mix to putty-like firmness, kneading it with the hands if necessary. Add Kwixset sparingly if the mixture is too watery.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eAnchoring embedded items in concrete\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003col\u003e\r\n\u003cli\u003eDrill hole.\u003c\/li\u003e\r\n\u003cli\u003eBlow out dust and cuttings.\u003c\/li\u003e\r\n\u003cli\u003eFill hole with water and scrub interior surfaces.\u003c\/li\u003e\r\n\u003cli\u003eWipe out excess water, leaving hole damp.\u003c\/li\u003e\r\n\u003cli\u003eIn floors, position embedded item in hole and pour fluid Kwixset around it.\u003c\/li\u003e\r\n\u003cli\u003eIn walls or ceiling, fill hole with plastic Kwixset and press or tamp embedded item into position. If Kwixset is too fluid and sags, let it stand a few minutes then smooth with trowel or putty knife.\u003c\/li\u003e\r\n\u003cli\u003eSupport embedded items until Kwixset has set – approximately 15-20 minutes.\u003c\/li\u003e\r\n\u003cli\u003eLet set for 1-2 hours before putting strain on embedded items.\u003c\/li\u003e\r\n\u003c\/ol\u003e\r\n\u003cp\u003e\u003cstrong\u003ePatching cracks and holes in concrete\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003col\u003e\r\n\u003cli\u003eRemove loose and fractured material in and around void to be patched.\u003c\/li\u003e\r\n\u003cli\u003eChisel edges of void so that no part of Kwixset patch is less than ½ inch deep. Feather edges should be avoided.\u003c\/li\u003e\r\n\u003cli\u003eBlow chips and dirt out of void. Remove any grease with caustic solution and scrape, if necessary, to provide clean interior surfaces.\u003c\/li\u003e\r\n\u003cli\u003eKeep void and surrounding area damp, but avoid water accumulation.\u003c\/li\u003e\r\n\u003cli\u003ePlace a small amount of Kwixset in void and scrub it into interior surfaces to ensure bond.\u003c\/li\u003e\r\n\u003cli\u003eFor floors, fill void with fluid consistency Kwixset; for walls and ceilings, fill void with plastic consistency Kwixset.\u003c\/li\u003e\r\n\u003cli\u003eAfter approx. ten minutes, smooth with trowel.\u003c\/li\u003e\r\n\u003cli\u003eAfter approx. thirty minutes, sprinkle patch with water, then light traffic may walk floor patches. After one hour, resume normal traffic.\u003c\/li\u003e\r\n\u003cli\u003eFor large patching jobs, sand and aggregate may be added per specifications.\u003c\/li\u003e\r\n\u003c\/ol\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/hartlineproducts.com\/wp-content\/uploads\/2019\/09\/msds-kwixset.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSDS\u003c\/a\u003e\u003c\/p\u003e","brand":"Rockite","offers":[{"title":"25lb","offer_id":48015798174011,"sku":null,"price":54.99,"currency_code":"USD","in_stock":true},{"title":"50lb","offer_id":48015798206779,"sku":null,"price":99.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/kwixset50.jpg?v=1710989659"},{"product_id":"water-reducer-444","title":"Water Reducer 444","description":"\u003cp\u003eWater Reducer 444 is a liquid plasticizer designed to work well with all Buddy Rhodes high-performance concrete mixes. It is a versatile water reducing option that can be used to make self consolidating concrete (SCC), and at lower doses will provide fluidity needed to spray GFRC mixes without imparting too much sag or slump. Water Reducer 444 can also be used to temper mixes that have been plasticized with Water Reducer 310 or Water Reducer 205. This combination of water reducers allows the fabricator a wide range of possibilities in responding to environmental conditions.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eRecommended Dosage Rate:\u003c\/strong\u003e 4 to 32 fluid oz. per 100 lbs of cement (250 to 2,000 mL per 100 kg). This is equivalent to a dosage range of 0.25% to 2.0% of cement weight. Dosage rates will vary depending on the materials used, mix design, ambient conditions and the requirements of a specific project. Make test batches of 10-20 lbs (5-10 kg) of concrete until you are familiar with Water Reducer 444's effect on your mix. This product should either be added to the mix water or at the end of the mixing cycle.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eCaution -\u003c\/strong\u003e Do not overdose Water Reducers. The ultimate indicator of an overdosage of plasticizer is segregation of the mix.\u003c\/p\u003e\r\n\u003cp\u003eMake test batches prior to production to ensure optimal dosage.\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/msds\/files\/WATER%20REDUCER%20444_SDS%20REV%201.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSDS\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/tb\/files\/BUDDY_RHODES_WATER_REDUCER_444.pdf\" target=\"_blank\" rel=\"noopener\"\u003eTDS\u003c\/a\u003e\u003c\/p\u003e","brand":"Buddy Rhodes","offers":[{"title":"Quart","offer_id":48015809872187,"sku":"10034002","price":29.99,"currency_code":"USD","in_stock":true},{"title":"Gallon","offer_id":48015809904955,"sku":"10034052","price":71.99,"currency_code":"USD","in_stock":true},{"title":"5 Gallon","offer_id":48015809937723,"sku":"115890","price":222.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/waterreducer444-1000x1000-grouped.jpg?v=1713544232"},{"product_id":"water-reducer-555","title":"Water Reducer 555","description":"\u003cp\u003eWater Reducer 555 is a high efficiency polycarboxylate-based superplasticizer in liquid form. It is ideally suited for use when making Self-Consolidating Concrete (SCC). Water Reducer 555 has been formulated to provide maximum workability without segregation to concrete.\u003c\/p\u003e\r\n\u003cp\u003eRecommended Dosage Rate: 8 to 20 fluid oz per 100 lbs. of cement (540 to 1400 mL per 100 kg). This is equivalent to a dosage range of 0.5% to 1.4% of cement weight. Dosage rates will vary depending on the materials used, mix design, ambient conditions and the requirements of a specific project. Make test batches of 10-20 lbs (5-10 kg) of concrete until you are familiar with Water Reducer 555's effect on your mix.\u003c\/p\u003e\r\n\u003cp\u003eMixing: Water Reducer 555 can be added with the initial batch water, but delayed addition will generally result in optimal water reduction. Mixing Water Reducer 555 with the batch water first yields improved mixing efficiency, while delayed addition allows for fine-tuning of the mix consistency. When adding incrementally, mix the concrete for 2 to 5 minutes before adding more. Adding too much superplasticizer is easy to do, and it can result in segregation.\u003c\/p\u003e\r\n\u003cp\u003e(Formerly BR Water Reducer)\u003c\/p\u003e\r\n\u003cp\u003eAdding Water Reducers will increase workability of concrete mixes that have a low water to cement ratio. Maintaining a low water to cement ratio is critical for reaching optimal strength in the cured matrix.\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/msds\/files\/1217_%201.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSDS\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/tb\/files\/BUDDY_RHODES_WATER_REDUCER_555_TDS.pdf\" target=\"_blank\" rel=\"noopener\"\u003eTDS\u003c\/a\u003e\u003c\/p\u003e","brand":"Buddy Rhodes","offers":[{"title":"Quart","offer_id":48015810167099,"sku":"10034001","price":23.99,"currency_code":"USD","in_stock":false},{"title":"Gallon","offer_id":48015810199867,"sku":"10023885","price":54.99,"currency_code":"USD","in_stock":true},{"title":"Five Gallon","offer_id":48015810232635,"sku":"10023868","price":204.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/grouped-waterreducer555-1000x1000-edit.jpg?v=1713544251"},{"product_id":"cement-glazes","title":"Cement Glazes","description":"\u003cp\u003e\u003cstrong\u003ePLEASE USE THE DROP-DOWN MENU TO SELECT YOUR DESIRED COLOR AND SIZE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eGlazes are a water based coloring treatment for use on cured concrete. They achieve the desired appearance with nano sized pigment particles that penetrate deeply into the concrete surface. The carrier reacts with the concrete to lock in the particles. Glazes can be used in a multitude of ways, producing subtle tints or dramatic color variation. See Glazes section for tips and tricks, application methods, and dilution rates.\u003c\/p\u003e\n\u003cp\u003eAvailable in a wide color range, these colors can be blended together to produce a wide array of shades.\u003c\/p\u003e\n\u003cp\u003eGlazes are UV resistant, and do not contain acids, metal salts, or acetone.\u003c\/p\u003e\n\u003cp\u003ePackaged in 4oz Spray Bottles and Quarts. For Gallon availability please call us.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSHAKE WELL BEFORE EACH USE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKeep From Freezing\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe material can be applied over polished concrete, but it will be far more durable and rich in concrete that is matte or etched.\u003c\/li\u003e\n\u003cli\u003eWhen the glaze is wet, it is active. When you rub across a still wet area, it will remove the material. This can either be a cool effect, or a precursor to cursing.\u003c\/li\u003e\n\u003cli\u003eThe longer the glaze has been dry, the harder it will be to remove. Soon after drying, it can be removed with a wet towel, the next day it will require diamond abrasives.\u003c\/li\u003e\n\u003cli\u003eApply thin layers. You will end up with a more durable finish applying multiple thin layers as opposed to one thick layer.\u003c\/li\u003e\n\u003cli\u003eThe first coat is the hardest. When the concrete is thirsty, it is tough to keep from getting streaks. You can dilute the glaze with distilled water by 50%. If you want to make an even more dilute solution, you can make a base of 25% CH Prep, 25% FS Seals, and 50% water. With this formula, you can make as dilute glaze as you want. The further the dilution on your first layer, the more forgiving.\u003c\/li\u003e\n\u003cli\u003eWhile this is compatible with many different sealers, and it in fact enhances the performance of many sealers, it should be tested with non BR Sealers.\u003c\/li\u003e\n\u003cli\u003eYou can combine these colors to make virtually any color you want. This is very useful if you have concrete colors you want to shift the color of, or if you simply want to enhance a color. If you want help formulating a color to suit a particular situation, let us know and we can help you in that process.\u003c\/li\u003e\n\u003cli\u003eA dilute version of the Black Glaze is a very effective way to enhance virtually any color. In many cases, this will produce the most durable ‘wet look’ effect you will find.\u003c\/li\u003e\n\u003cli\u003eProtect your piece with sealer. These Glazes are UV resistant, and will stand up to a fair bit of abrasion, but sealer will help protect them for the long haul.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" href=\"https:\/\/www.smooth-on.com\/tb\/files\/BUDDY%20RHODES%20GLAZES%20TDS.pdf\" target=\"_blank\"\u003eTDS\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" href=\"https:\/\/www.smooth-on.com\/msds\/files\/1247_%201.pdf\" target=\"_blank\"\u003eBlack SDS\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" href=\"https:\/\/www.smooth-on.com\/msds\/files\/1250_%201_BR%20GLAZE%20BLUE.pdf\" target=\"_blank\"\u003eBlue SDS\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" href=\"https:\/\/www.smooth-on.com\/msds\/files\/1251_%201.pdf\" target=\"_blank\"\u003eBright Red SDS\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" href=\"https:\/\/www.smooth-on.com\/msds\/files\/1258_%201.pdf\" target=\"_blank\"\u003eGreen SDS\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" href=\"https:\/\/www.smooth-on.com\/msds\/files\/1253_%201.pdf\" target=\"_blank\"\u003eLeather SDS\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" href=\"https:\/\/www.smooth-on.com\/msds\/files\/1269_%201.pdf\" target=\"_blank\"\u003eMagenta SDS\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" href=\"https:\/\/www.smooth-on.com\/msds\/files\/1256_%201.pdf\" target=\"_blank\"\u003eMaple SDS\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" href=\"https:\/\/www.smooth-on.com\/msds\/files\/1265_%201.pdf\" target=\"_blank\"\u003eOlive SDS\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" href=\"https:\/\/www.smooth-on.com\/msds\/files\/1270_%201.pdf\" target=\"_blank\"\u003eUmber SDS\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" href=\"https:\/\/www.smooth-on.com\/msds\/files\/1257_%201.pdf\" target=\"_blank\"\u003eWhite SDS\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" href=\"https:\/\/www.smooth-on.com\/msds\/files\/1254_%201.pdf\" target=\"_blank\"\u003eYellow SDS\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Buddy Rhodes","offers":[{"title":"Black 4oz","offer_id":48015811445051,"sku":"10024054","price":24.99,"currency_code":"USD","in_stock":true},{"title":"Black Quart","offer_id":48015811412283,"sku":"10023946","price":49.99,"currency_code":"USD","in_stock":false},{"title":"Blue 4oz","offer_id":48015811477819,"sku":"10024269","price":24.99,"currency_code":"USD","in_stock":true},{"title":"Blue Quart","offer_id":48015811510587,"sku":"10024227","price":49.99,"currency_code":"USD","in_stock":true},{"title":"Bright Red 4oz","offer_id":48015811543355,"sku":"10024376","price":24.99,"currency_code":"USD","in_stock":true},{"title":"Green 4oz","offer_id":48015811576123,"sku":"10024377","price":24.99,"currency_code":"USD","in_stock":true},{"title":"Leather 4oz","offer_id":48015811608891,"sku":"10024225","price":24.99,"currency_code":"USD","in_stock":true},{"title":"Leather Quart","offer_id":48015811641659,"sku":"10023987","price":49.99,"currency_code":"USD","in_stock":true},{"title":"Magenta 4oz","offer_id":48015811674427,"sku":"10025018","price":24.99,"currency_code":"USD","in_stock":true},{"title":"Maple 4oz","offer_id":48015811707195,"sku":"10024239","price":24.99,"currency_code":"USD","in_stock":true},{"title":"Maple Quart","offer_id":48015811739963,"sku":"10024103","price":49.99,"currency_code":"USD","in_stock":true},{"title":"Olive 4oz","offer_id":48015811772731,"sku":"10024421","price":24.99,"currency_code":"USD","in_stock":true},{"title":"Umber 4oz","offer_id":48015811805499,"sku":"10024255","price":24.99,"currency_code":"USD","in_stock":true},{"title":"Umber Quart","offer_id":48015811838267,"sku":"10024020","price":49.99,"currency_code":"USD","in_stock":false},{"title":"White 4oz","offer_id":48015811871035,"sku":"10024131","price":24.99,"currency_code":"USD","in_stock":true},{"title":"White Quart","offer_id":48015811903803,"sku":"10024012","price":51.99,"currency_code":"USD","in_stock":true},{"title":"Yellow 4oz","offer_id":48015811936571,"sku":"10024296","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/glazescatimage-main-1000x1000-1.jpg?v=1713543912"},{"product_id":"rockite","title":"Rockite","description":"\u003cp\u003e\u003cstrong\u003eRockite\u003c\/strong\u003e is a fast setting, hydraulic expansion cement. Mixes with water, initially sets within 15 minutes, and within one hour sets stronger than concrete. Great for patching concrete and brick, and anchoring bolts, screws, balustrades, gates, fencing, railings, and more.\u003c\/p\u003e\r\n\u003cp\u003eRockite Cement meets designations ASTM C1107-02, C109-01, C191-01, E488-96.\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/hartlineproducts.com\/wp-content\/uploads\/2019\/05\/specsheet-rockite.pdf\" target=\"_blank\" rel=\"noopener\"\u003eTech Sheet\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/hartlineproducts.com\/wp-content\/uploads\/2022\/07\/ROCKITE-SDS-3-Rev.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSDS\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eWarning:\u003c\/strong\u003e Due to its expansion properties, do not use Rockite for anchoring in cement that is narrow on top such as handicapped ramps, concrete construction barriers, or concrete walls. When using Rockite, always leave at least 4 inches from the edge of the concrete to the hole.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDo not use Rockite in swimming pools!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eWhen used outdoors, Rockite should be allowed to dry out thoroughly for seven days, and then protected with a coat of good grade exterior paint. Rockite should not be used underwater or as a primary structural member. Rockite should not be used outdoors for anchoring in porous materials such as brick, limestone and granite, when they are exposed to wet conditions. Use Kwixset for those kinds of applications.\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eust add water\u003c\/li\u003e\r\n\u003cli\u003eInitially sets in 15 minutes\u003c\/li\u003e\r\n\u003cli\u003eSelf-leveling\u003c\/li\u003e\r\n\u003cli\u003eTakes stress loading in two hours\u003c\/li\u003e\r\n\u003cli\u003eMinimal waste: mix Rockite\/Kwixset as you require it\u003c\/li\u003e\r\n\u003cli\u003eIndefinite shelf life\u003c\/li\u003e\r\n\u003cli\u003eRockite will set below freezing, down to 25°F \/ -4°C\u003c\/li\u003e\r\n\u003cli\u003eKwixset will set down to 39°F \/ 4°C\u003c\/li\u003e\r\n\u003cli\u003eEasy, economical, and safe to use\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eHow to Mix Rockite Cement\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eAlways use a clean container. Never add sand, gravel, or other foreign substances to Rockite – they weaken the cement and affect the setting.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eYield (Volume Calculation)\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e1 lb Rockite Cement yields 18.75 cubic inches\u003c\/li\u003e\r\n\u003cli\u003e92 lbs Rockite Cement yields one cubic foot\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eFluid (Pouring) Consistency\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eMix Rockite with water to a thick paste. Let the mixture stand for approx. one minute, then stir thoroughly. At this point, the mixture will become more fluid. The proper consistency is like a thick batter, just fluid enough to pour, \u003cem\u003ebut not watery\u003c\/em\u003e. Keep the mix thick, this makes stronger cement. Add water very sparingly. If the mix is thin, add more Rockite promptly to thicken it. The exact water measurements are 4 ½ oz per lb or 1 ½ pints per 5 lb box – measure accurately!\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003ePlastic Consistency\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eAdd only enough water to make the cement form dry lumps. Keep mixing for 60–90 seconds. As the powder absorbs the moisture, the cement will begin to look like ordinary putty. This is the proper consistency. The exact water measurements for the plastic consistency is 3 ½ oz per lb – measure accurately!\u003c\/p\u003e\r\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shoplightspeed.com\/shops\/606431\/files\/56749835\/rockitespecs.png\" alt=\"\" width=\"753\" height=\"572\"\u003e\u003c\/p\u003e","brand":"Rockite","offers":[{"title":"5lb","offer_id":48015991243067,"sku":"13840410005","price":12.99,"currency_code":"USD","in_stock":false},{"title":"10lb","offer_id":48015991275835,"sku":"13840410010","price":23.99,"currency_code":"USD","in_stock":false},{"title":"50lb","offer_id":48015991308603,"sku":"13840410051","price":69.99,"currency_code":"USD","in_stock":true},{"title":"Special White 5lb","offer_id":48015991341371,"sku":null,"price":15.99,"currency_code":"USD","in_stock":true},{"title":"Special White 10lb","offer_id":48015991374139,"sku":null,"price":29.99,"currency_code":"USD","in_stock":true},{"title":"Special White 50lb","offer_id":48015991406907,"sku":null,"price":89.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/rockiteseries_21d46c28-fbdf-4d3b-a886-8f9bed49013c.png?v=1714235188"},{"product_id":"ict-concrete-sealer-system","title":"ICT Concrete Sealer System","description":"\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/tb\/files\/BR_ICT_PS1_INSTRUCTIONS.pdf\" target=\"_blank\" rel=\"noopener\"\u003eAPPLICATION INSTRUCTIONS\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eICT PS1 Reactive Sealer\u003c\/strong\u003e hybrid sealer combines the benefits of reactive penetrating sealing technology and a micro-coating technology together in one single product. This sealer provides excellent stain and abrasion resistance, requiring very minimal maintenance for years of quality use and abuse. An application of ICT Clean and Set is needed following the PS1 to accelerate the curing process of the sealer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCoverage:\u003c\/strong\u003e The coverage will be approximately 200 ft2 per quart, which may vary due to porosity and application technique. ICT PS1 has a high sheen finish. For a low sheen formula, use ICT PS1‑LS.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/msds\/files\/1477_1.pdf\" target=\"_blank\" rel=\"noopener\"\u003ePS1\/PS1LS SDS\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/tb\/files\/PS1+PS1-LS%20_INSTRUCTIONS.pdf\" target=\"_blank\" rel=\"noopener\"\u003ePS1\/PS1LS Tech Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eICT Clean and Set \u003c\/strong\u003eis the final step in the ICT sealing system. It accelerates the curing of ICT sealer products and is also effective as a cleaner for concrete sealed with ICT. When using as a cleaner, dilute Clean and Set at 3 parts water to 1 part Clean and Set.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/msds\/files\/1239_1.pdf\" target=\"_blank\" rel=\"noopener\"\u003eICT Clean and Set SDS\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/tb\/files\/ICT_CLEAN_AND_SET.pdf\" target=\"_blank\" rel=\"noopener\"\u003eClean and Set Tech Sheet\u003c\/a\u003e\u003c\/p\u003e","brand":"Buddy Rhodes","offers":[{"title":"PS1 Quart","offer_id":48015992127803,"sku":"10025770","price":89.99,"currency_code":"USD","in_stock":false},{"title":"PS1 Gallon","offer_id":48015992160571,"sku":"10025769","price":325.0,"currency_code":"USD","in_stock":true},{"title":"PS1-LS Quart","offer_id":48015992193339,"sku":"10025775","price":89.99,"currency_code":"USD","in_stock":false},{"title":"PS1-LS Gallon","offer_id":48015992226107,"sku":"10025774","price":325.0,"currency_code":"USD","in_stock":false},{"title":"Clean and Set Quart","offer_id":48015992258875,"sku":"10029009","price":29.99,"currency_code":"USD","in_stock":true},{"title":"Clean and Set Gallon","offer_id":48015992291643,"sku":"10023923","price":84.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/ictsystem_25c17c7d-c2ac-49d4-848f-b7700aa06bd9.png?v=1713544081"},{"product_id":"pva-polyvinyl-alcohol-fiber","title":"PVA (Polyvinyl Alcohol) Fiber","description":"\u003cp\u003ePVA Fibers (polyvinyl alcohol) are high-performance reinforcement fibers for concrete and mortar. PVA fibers are well-suited for a wide variety of applications because of their superior crack-fighting properties, high modulus of elasticity, excellent tensile and molecular bond strength, and high resistance to alkali, UV, chemicals, fatigue and abrasion. PVA fibers are unique in their ability to create a molecular bond with mortar and concrete that is 300% greater than other fibers.\u003c\/p\u003e\n\u003cp\u003eThese are monofilament fibers that are available in 3 different lengths and filament diameters.\u003c\/p\u003e\n\u003ctable class=\"chart\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"background: #465051; color: white;\"\u003e\n\u003ctd\u003eFiber\u003c\/td\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003eFilament Diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePVA RECS 7\u003c\/td\u003e\n\u003ctd\u003e0.25” (6 mm)\u003c\/td\u003e\n\u003ctd\u003e5 Denier (24 Microns)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePVA RECS 15\u003c\/td\u003e\n\u003ctd\u003e0.375” (8 mm)\u003c\/td\u003e\n\u003ctd\u003e8 Denier (38 Microns)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePVA RECS 100\u003c\/td\u003e\n\u003ctd\u003e0.5” (13 mm)\u003c\/td\u003e\n\u003ctd\u003e20 Denier (100 Microns)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eDue to the fine nature of these fibers, and the fact that they disperse into monofilament fibers, they are less likely to be visible in finished surfaces. How visible they are in relation to each other is in direct proportion to their various diameters (7 is least visible, 100 is most visible). Equally true, the smaller the fiber, the more fibers there are for any given unit of measure, the more likely they are to choke mixes at higher dosage rates. Therefore, the PVA100 are dosed at higher rates in the more flowable mixes than are the PVA15.\u003c\/p\u003e\n\u003cp\u003ePVA 100's are favored for their ease of workability compared to the 7's and 15's. These are the most visible of the PVA fibers in finished surfaces due to their length. Ideal for use in flowable (SCC) ECC concrete mixes. PVA fibers can be used as a primary or secondary means of reinforcing artisan concrete objects, including concrete countertops, architectural concrete elements, concrete furniture, and many other applications.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli class=\"doc\"\u003e\n\u003cdiv data-count=\"2\"\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/tb\/files\/BUDDY_RHODES_PVA_FIBERS.pdf\" class=\"infodoc\" target=\"_blank\"\u003e\u003cspan\u003eDownload Technical Bulletin\u003c\/span\u003e\u003c\/a\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli class=\"doc\"\u003e\n\u003cdiv data-count=\"3\"\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/msds\/files\/1557_%201.pdf\" class=\"infodoc\" target=\"_blank\"\u003e\u003cspan\u003eDownload SDS\u003c\/span\u003e\u003c\/a\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Buddy Rhodes","offers":[{"title":"RECS 7 1lb Bag","offer_id":48016922542395,"sku":"10023913","price":20.99,"currency_code":"USD","in_stock":true},{"title":"RECS 15 1lb Bag","offer_id":48016922575163,"sku":"10023850","price":20.99,"currency_code":"USD","in_stock":true},{"title":"RECS 100 1lb Bag","offer_id":48016922509627,"sku":"10023864","price":20.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/pva-fiber-recs100-closeup-opt-43529143431060050050.jpg?v=1711002022"},{"product_id":"we-101-concrete-retarder-1lb","title":"WE 101 Concrete Retarder 1lb","description":"\u003cp\u003eWE101 is a specialty zinc oxide concrete retarder. It is a white powder used to control and delay initial curing of concrete mixes, especially at elevated casting temperatures or where extended work time is required. In addition to being used as a set retarder, WE 101 also increases ultimate compressive strength and other physical properties. \u003c\/p\u003e\n\u003cp\u003eClick here for: \u003ca href=\"https:\/\/www.smooth-on.com\/msds\/files\/1287_1.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSDS\u003c\/a\u003e \u003cbr\u003eClick here for: \u003ca href=\"https:\/\/www.smooth-on.com\/tb\/files\/WE101%20TDS.pdf\" target=\"_blank\" rel=\"noopener\"\u003eTech Sheet\u003c\/a\u003e\u003c\/p\u003e","brand":"Buddy Rhodes","offers":[{"title":"Default","offer_id":48019442139451,"sku":"10024325","price":8.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/we101.jpg?v=1711032005"},{"product_id":"winterstone-casting","title":"Winterstone Casting","description":"\u003cp\u003e\u003cstrong\u003eWINTERSTONE Casting 2000\u003c\/strong\u003e is a new formulation suitable for a variety of art-related and commercial casting applications, and architectural restorations. It has improved strength and shrinkage resistance with fine detail reproduction capabilities. It is ideal for casting of thin shell multi-dimensional or baf-relief forms either by “slush” casting or “lay-up”.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWINTERSTONE Casting 2000\u003c\/strong\u003e is a dry white powder ––– a complex multi-component cementitious mixture ––– which when mixed with a nominal amount of water and cast into a mold sets into a stone hard material with faithful reproduction of detail. The hardening process is a result of the internal reactions taking place between the water and the various components. The inclusion of proper reinforcing mesh, either metallic “ hardware cloth ” or alkali resistant fibreglas, as backing to the casting; or chopped strand (e.g. fibreglas, polypropylene) mixed integrally into the back-up mixture produces a structurally sound composite “ shell ” with increased strength characteristics. This surface “ shell ” combined with proper back-up reinforcing rods ( particularly in larger 3 - dimensional sculptures or bas-relief panels ) results in a light and efficient overall structural system and allows considerable freedom in complexity and intricacy of shape.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWINTERSTONE\u003c\/strong\u003e can be integrally pigmented during the mixing stage or can be externally patinated after de-molding. Hardened WINTERSTONE can be refined with abrasives and polished if necessary. Finished and sealed WINTERSTONE is weather stable and may be founded in an outdoor environment. With proper care and maintenance it can be expected to last many years.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWINTERSTONE\u003c\/strong\u003e is easily prepared by mixing water in the ratio of \u003cstrong\u003e18 to 19 parts by weight of water to 100 parts by weight of dry mix\u003c\/strong\u003e. ( This is equivalent to an approximate \u003cstrong\u003evolumetric\u003c\/strong\u003e measure of \u003cstrong\u003e21 to 22 parts of water to 100 parts of \u003cem\u003eloose\u003c\/em\u003e dry mix\u003c\/strong\u003e. The dry mix in the supplied bag is generally compacted due to shipping and handling.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv data-block-type=\"2\" class=\"sqs-block html-block sqs-block-html\" id=\"block-4635dd024fbaf799efe6\"\u003e\n\u003cdiv class=\"sqs-block-content\"\u003e\n\u003cdiv class=\"sqs-html-content\"\u003e\n\u003ch2\u003eWhat is different about Casting Mix?\u003c\/h2\u003e\n\u003cp style=\"margin-left: 40px;\"\u003e- When mixed with water Casting Mix is quite liquid and pourable.  It has improved strength and shrinkage resistance with fine detail reproduction capabilities.  It is ideal for casting thin shell sculptures or bas reliefs using the slush casting technique.\u003c\/p\u003e\n\u003ch2\u003eCan I add any fillers to Casting Mix?\u003c\/h2\u003e\n\u003cp style=\"margin-left: 40px;\"\u003e- Other than pigments, no other additional fillers (i.e., metallic powders) are required or recommended.  If metallic powders are desired, they should be used with Winterstone Ultra Mix only.\u003c\/p\u003e\n\u003ch2\u003eWhat is slush casting?\u003c\/h2\u003e\n\u003cp style=\"margin-left: 40px;\"\u003e- Slush casting is when a liquid medium is poured into a mold and \"slushed\" around to provide a thin layer with complete coverage.  Slush casting usually involves multiple pours, leaving time between the pours to allow the medium to set.  \u003c\/p\u003e\n\u003ch2\u003eHow do I reinforce Casting Mix?\u003c\/h2\u003e\n\u003cp style=\"margin-left: 40px;\"\u003e- Once a face layer has been poured, chopped strand can be added to batches which will create the final thickness.\u003c\/p\u003e\n\u003ch2\u003eWhat is the yield of Casting Mix?\u003c\/h2\u003e\n\u003cp style=\"margin-left: 40px;\"\u003e- One pound of dry mix produces approx. 17 cu. in. of hardened end product.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-block-type=\"47\" class=\"sqs-block horizontalrule-block sqs-block-horizontalrule\" id=\"block-yui_3_17_2_102_1473439078355_37540\"\u003e\n\u003cdiv class=\"sqs-block-content\"\u003e\u003chr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-block-type=\"2\" class=\"sqs-block html-block sqs-block-html\" id=\"block-yui_3_17_2_102_1473439078355_36806\"\u003e\n\u003cdiv class=\"sqs-block-content\"\u003e\n\u003cdiv class=\"sqs-html-content\"\u003e\n\u003ch2\u003e\u003cstrong\u003eHow to Mix a batch of Casting Mix\u003c\/strong\u003e\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003ePlace the measured amount of dry mix into a container large enough to be mixed with a machine mixer (mixing attachment with a drill works best)\u003c\/li\u003e\n\u003cli\u003eAdd required amount of water - generally 1 part water to 5 parts dry mix.   (Technically 19 parts water to 100 parts dry mix by weight or 22 parts water to 100 parts dry mix by volume.)   Casting Mix is extremely sensitive to very small differences in the quantity of mix water.  The strongest and most durable product results from using as little water as possible\u003c\/li\u003e\n\u003cli\u003eMix with mixer until well mixed (time will vary depending on quantity being mixed).  Be sure to scrape the bottom of the pail to make sure there is no dry mix hiding there!\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cdiv data-block-type=\"2\" class=\"sqs-block html-block sqs-block-html\" id=\"block-yui_3_17_2_90_1473439078355_12255\"\u003e\n\u003cdiv class=\"sqs-block-content\"\u003e\n\u003cdiv class=\"sqs-html-content\"\u003e\n\u003ch2\u003e\u003cstrong\u003eHow to Cast with Casting Mix - Step-by-step instructions\u003c\/strong\u003e\u003c\/h2\u003e\n\u003ch3\u003e1.  Prepare the mold\u003c\/h3\u003e\n\u003cp style=\"margin-left: 40px;\"\u003e- Casting Mix works with all kinds of molds.  (Polyurethane, silicone, etc.).  Ensure the mold is clean.  Apply appropriate releasing agent to the mold.\u003c\/p\u003e\n\u003cdiv data-block-type=\"2\" class=\"sqs-block html-block sqs-block-html\" id=\"block-yui_3_17_2_90_1473439078355_19701\"\u003e\n\u003cdiv class=\"sqs-block-content\"\u003e\n\u003cdiv class=\"sqs-html-content\"\u003e\n\u003ch3\u003e2.  Mix the face coat batch of Casting Mix\u003c\/h3\u003e\n\u003cp style=\"margin-left: 40px;\"\u003e- The initial batch should be small enough to use within its open pouring time and yet sufficiient to cover the mold surface to a thickness of 1\/16\" to 1\/8\".   Brush in and\/or pour the Casting Mix into the mold, slushing it around to completely cover .  Pour out any excess.  Allow the face coat to harden for 10-15 minutes.  (NOTE:  Ultra mix can replace Casting Mix for this face coat but an additive will be required to increase fluidity of the Ultra Mix.)\u003c\/p\u003e\n\u003cdiv data-block-type=\"2\" class=\"sqs-block html-block sqs-block-html\" id=\"block-yui_3_17_2_90_1473439078355_29996\"\u003e\n\u003cdiv class=\"sqs-block-content\"\u003e\n\u003cdiv class=\"sqs-html-content\"\u003e\n\u003ch3\u003e3.  Prepare the second batch of Casting Mix\u003c\/h3\u003e\n\u003cp style=\"margin-left: 40px;\"\u003e- Mix the second batch and include chopped strand (up to 1.5% by weight) for additional strength.   Pour the second batch into the cast and slush it around as before.  \u003c\/p\u003e\n\u003cdiv data-block-type=\"2\" class=\"sqs-block html-block sqs-block-html\" id=\"block-yui_3_17_2_90_1473439078355_34293\"\u003e\n\u003cdiv class=\"sqs-block-content\"\u003e\n\u003cdiv class=\"sqs-html-content\"\u003e\n\u003ch3\u003e4.  Additional layers\u003c\/h3\u003e\n\u003cp style=\"margin-left: 40px;\"\u003e- The build up can be repeated layer upon layer until the desired thickness is achieved.  The overall thickness need not be greater than 1\/4\" to 3\/8\" for smaller pieces, 1\/2\" to 3\/4\" for life size pieces.  This sample was poured solid.  In this case Urefil micro balloons were added as a filler to reduce material and weight.  Also, when still wet, a threaded rod was added so mounting later is a breeze.\u003c\/p\u003e\n\u003cdiv data-block-type=\"2\" class=\"sqs-block html-block sqs-block-html\" id=\"block-yui_3_17_2_90_1473439078355_39683\"\u003e\n\u003cdiv class=\"sqs-block-content\"\u003e\n\u003cdiv class=\"sqs-html-content\"\u003e\n\u003ch3\u003e5.  Drying\/Demolding\u003c\/h3\u003e\n\u003cp style=\"margin-left: 40px;\"\u003e- Once finished casting cover the entire piece in plastic for even curing.\u003c\/p\u003e\n\u003cp style=\"margin-left: 40px;\"\u003e- The piece may be demolded after 16 to 24 hours, depending on the shape and fragiity of the detail and the flexibility of the mold.  \u003c\/p\u003e\n\u003cp style=\"margin-left: 40px;\"\u003e- If it is demolded before 24 hours, the demolded piece should be re-covered in plastic until the total cure time under plastic is 24 hrs.\u003c\/p\u003e\n\u003cp style=\"margin-left: 40px;\"\u003e- After 24 hours, remove plastic and allow to air dry.\u003c\/p\u003e\n\u003cp style=\"margin-left: 40px;\"\u003e- With this sample the cast is mounted on a temporary base for repairing imperfections and patinating.\u003c\/p\u003e\n\u003cdiv data-block-type=\"2\" class=\"sqs-block html-block sqs-block-html\" id=\"block-yui_3_17_2_90_1473439078355_52932\"\u003e\n\u003cdiv class=\"sqs-block-content\"\u003e\n\u003cdiv class=\"sqs-html-content\"\u003e\n\u003ch3\u003e6.  Fixing Imperfections\u003c\/h3\u003e\n\u003cp style=\"margin-left: 40px;\"\u003e- Regardless of the type of mold or casting technique used, some minor imperfections may occur.  Repairs should be done before any patinating or sealing work.  \u003c\/p\u003e\n\u003cp style=\"margin-left: 40px;\"\u003e- Seams can be shaved away with a blade or gently sanded away.\u003c\/p\u003e\n\u003cp style=\"margin-left: 40px;\"\u003e- Any air holes or other surface defects can be filled by mixing a small amount of Sculpting or Ultra Mix by hand to a creamy consistency.  Lightly spray the area being repaired and spread the Mix with a fine dry sponge or rubber\/silicone trowel.  Allow this to cure for 24 hours before sanding.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Winterstone","offers":[{"title":"6lb","offer_id":48019448332603,"sku":"842006","price":44.0,"currency_code":"USD","in_stock":true},{"title":"50lb Bag","offer_id":48019448365371,"sku":"842050","price":124.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/winterstone-casting-55.jpg?v=1711032047"},{"product_id":"winterstone-sculpting","title":"Winterstone Sculpting","description":"\u003cp\u003eWINTERSTONE is a sculpting medium developed by Sculptor, Lorne P. Winters, for direct modeling of finished sculpture.  It works as easily as clay and sets as hard as stone.\u003c\/p\u003e\n\u003cp\u003eWINTERSTONE is a white, dry powder mix --- a complex multi-component cementitious mixture  --- which when mixed with the necessary water produces a modeling medium of clay-like consistency.  It stiffens and hardens gradually and continuously.\u003c\/p\u003e\n\u003cp\u003eDuring the initial plastic stage it can be modelled easily with control.  As the material hardens the sculptor can proceed with carving techniques.  By allowing the sculptor to employ modeling and\/or carving techniques when working with WINTERSTONE, the full potential of the material can be developed.\u003c\/p\u003e\n\u003cp\u003eThe inclusion of proper reinforcing elements into the material wherever stress is expected, produces a structurally efficient composite material that can be shaped into any complexity of form.\u003c\/p\u003e\n\u003cp\u003eWINTERSTONE can be integrally pigmented or externally patinated.\u003c\/p\u003e\n\u003cp\u003eThe hardened WINTERSTONE surface can be refined with abrasives and polished.\u003c\/p\u003e\n\u003cp\u003eThe finished WINTERSTONE sculpture is intrinsically weather-stable and may be founded in an outdoor environment.  With proper care it can be expected to last many years.\u003c\/p\u003e\n\u003cp\u003eThese features of WINTERSTONE -- the flexibility of sculpting techniques, adaptability to varied surface textures and finishes, structural versatility, permanence and stability -- make WINTERSTONE an ideal sculptural material.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePREPARATION\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWINTERSTONE (Regular) is supplied as a one part dry mix. It has at least a one year shelf life provided it is kept in a sealed container in a dry place.\u003c\/p\u003e\n\u003cp\u003eWINTERSTONE is easily prepared by mixing in water in the ratio of 23 to 25 parts (by weight) of water to 100 parts (by weight) of dry mix.  (This is equivalent to an approximate volumetric measure of 23 to 25 parts of water to 100 parts of loose dry mix. (The dry mix in the supplied package is generally compacted due to shipping and handling and should be \u003cem\u003efluffed-up\u003c\/em\u003e into a loose condition before measuring volumetrically)\u003c\/p\u003e\n\u003cp\u003eThis range of mixing water allows the sculptor the choice of a \u003cem\u003estiff\u003c\/em\u003e putty consistency at the lesser amount (suitable for finger work) to a softer or \u003cem\u003epastier\u003c\/em\u003e consistency toward the greater amount (suitable for spatula\/trowel tools). \u003cem\u003eThe water content should not exceed the upper limit of water recommended.  It should be kept in mind that the strongest and most durable end product results from using as little mixing water as possible.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003ePlace the measured amounts of dry mix into a mixing container.  Generally, a one quart (litre) plastic container is adequate and can be easily mixed by hand using a spatula. Larger sculptures requiring greater quantities of mix at any one time can be prepared using a 2 gallon pail and an electric mixing tool.\u003c\/p\u003e\n\u003cp\u003eMix at least 1 minute, then let the mix \u003cem\u003erest\u003c\/em\u003e for 1 minute, and then re-mix for at least another 1\/2 minute.  In any case, the batch of WINTERSTONE should not be greater than can be used within its working time of 40 to 50 minutes. Occasionally re-mixing\/re-molding the mixture is helpful in maintaining a workable consistency.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOne pound of dry mix produces approximately 19 cu.in. of mixed product.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eAPPLICATION\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eImmediately after mixing, the WINTERSTONE mixture may be applied to a prepared steel wire\/mesh armature or styrofoam core armature using a spatula, trowel or by hand.  If by hand, particularly for those who have sensitive skin, some pre-applied hand cream or use of latex gloves is recommended.  A workable consistency may be maintained by occasional re-mixing\/re-molding the mixture in the mixing container -- AVOID using additional water.\u003c\/p\u003e\n\u003cp\u003eOpen time of the mixture (reasonable workable consistency) will normally be 40 to 50 minutes  depending on the amount of water in the mix and on the ambient working conditons. The build-up may be achieved by applying successive layers. As the material is self-bonding it need not be applied \u003cem\u003ewet-on-wet\u003c\/em\u003e but may be applied on an already hardened surface. It is recommended that the surface be roughened with a serrating tool and dampened with a light mist spray before applying a fresh mixture. Continue building up successive layers of WINTERSTONE using fibreglass or steel mesh where required.  The outermost surface thickness should include at least one, and preferably two layers of mesh reinforcing particularly if the sculpture is to be founded outdoors in an area of extreme weather\/temperature conditions. Take care to maintain at least 1\/8\" thickness of WINTERSTONE applied over the top layer of fibremesh.  This will provide some thickness for sanding and polishing of the hardened product. It is essential that premature evaporation of water from the surface is avoided. During application and after initial set of the material, if the surface appears to be drying re-wet these areas with a fine water mist\/spray.  At the end of a working session cover the entire piece with a plastic sheet, and keep it covered for an additional 24 hours.\u003c\/p\u003e\n\u003cp\u003e \u003cstrong\u003eFINISHING\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWINTERSTONE stiffens and hardens gradually and continuously throughout the modeling process.  Generally within a few hours of application, depending on the initial water content of the mixture, and the ambient working temperature WINTERSTONE stiffens or sets to the degree that \u003cem\u003esoft\u003c\/em\u003e carving techniques may be employed.\u003c\/p\u003e\n\u003cp\u003eAt this stage \u003cem\u003esoft\u003c\/em\u003e carving tools and serrated tools or the like are more suitable than standard clay modeling tools.  The material will reach its final set within 24 hours although it will continue gaining in strength and hardness over the next few weeks.  It is preferable at this time to \u003cem\u003ecarve\u003c\/em\u003e any fine details or to point or serrate surface texture if desired, as the material is hard enough to avoid tearing but not yet so hard that considerable effort or \u003cem\u003ehard\u003c\/em\u003e carving is required.\u003c\/p\u003e\n\u003cp\u003eAny patching required should be done as soon as possible, be it before or after the final set. The surface of the hardened WINTERSTONE may be patched with some WINTERSTONE which has been freshly mixed in a small batch to a creamy consistency. Roughen the area to be patched with a serrating tool and dampen the area to be patched before applying the mixture.\u003c\/p\u003e\n\u003cp\u003eAfter 2 to 3 days of air-drying give the piece a light water spray and inspect the surface closely. Ocassionally irregular \u003cem\u003elines\u003c\/em\u003e may appear which although invisible to the naked eye when dry, become evident upon wetting and are due to the differential surface absorption along the \u003cem\u003elines\u003c\/em\u003e. These lines are very fine shrinkage cracks which are generally the result of the use of excess mixing water and\/or inadequate curing.  A creamy mixture of the Regular Sculpting Medium should be rubbed well \u003cem\u003einto \u003c\/em\u003ethese areas with a fine sponge and the excess rubbed off. After curing, follow-up with a very light fine sanding before applying any sealers.\u003c\/p\u003e\n\u003cp\u003eHardened WINTERSTONE surfaces may be sanded or polished using abrasive grit papers or cloths. Many kinds of surface coatings can be applied to WINTERSTONE sculpture with excellent adhesion, including water, oil or solvent based materials.  The sculpture must be thoroughly dried if coatings other than water-based materials are applied.  In general, after polishing, breathable type coatings or sealers such as water-based acrylics are recommended.  Such sealers are clear and colourless and can be had in matte or gloss. Breathable silicone and siloxane penetrating water repellent sealers may be used but once applied generally preclude the application of additional decorative coatings particularly water-based.\u003c\/p\u003e\n\u003cp\u003e \u003cstrong\u003ePIGMENTATION\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWINTERSTONE can be integrally pigmented to brilliant or soft colours. In general, pigments that are suitable for use in cement mortars such as iron oxides (reds, yellows, browns, blacks, terra cottas) can also be used in WINTERSTONE.  All pigments added should be pure, dry powders and not liquid dispersions or mixtures with other fillers. \u003cstrong\u003eIn general, do not use more than 5 parts of pigments per 100 parts of dry WINTERSTONE\u003c\/strong\u003e.  To check whether a pigment is compatible, try it first in a small test batch of WINTERSTONE.  If adding the pigment causes the WINTERSTONE to set either too quickly or too slowly, the pigment is not compatible and should not be used.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWEATHERABILITY\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe life span of a WINTERSTONE sculpture placed in an outdoor environment cannot be assigned accurately because WINTERSTONE as we know it is not old enough to provide us with examples of any age.  Modern buildings and structures constructed of materials based on present day cement\/concrete technology generally have a designed minimum life span of 100 years.  It is safe to assume that WINTERSTONE sculpture utilizing similar but more complex and up-to-date technology\/materials should last that long.  Proper sealing and maintenance optimizes the sculptures outdoor performance.\u003c\/p\u003e\n\u003cp\u003eExtra care and caution should be taken throughout the whole sculpting process for any sculpture which is to be subjected to the climatic rigors of an outdoor environment. All aspects of the process are critical, particularly using minimal mixing water, careful application and consolidation during the build-up, proper embedment of reinforcing mesh, proper and adequate curing, and final surface finishing and sealing.\u003c\/p\u003e\n\u003cdiv id=\"block-yui_3_17_2_101_1473439078355_14610\" class=\"sqs-block html-block sqs-block-html\" data-block-type=\"2\"\u003e\n\u003cdiv class=\"sqs-block-content\"\u003e\n\u003cdiv class=\"sqs-html-content\"\u003e\n\u003ch2\u003eWhat is Winterstone Sculpting Mix?\u003c\/h2\u003e\n\u003cp style=\"margin-left: 40px;\"\u003e- Sculpting Mix is a white, dry powder mix which when mixed with water produces a clay-like consistency.  Initially it can be modelled easily like clay.  As it starts to harden it can be carved with soft carving tools.  After 24 hours it can be carved with hard carving tools (i.e., Dremel).\u003c\/p\u003e\n\u003ch2\u003eHow is Sculpting Mix used to create a one-of-a-kind sculpture?\u003c\/h2\u003e\n\u003cp style=\"margin-left: 40px;\"\u003e- Sculpting Mix is built up by applying successive layers over an armature (see \"instructions\" tab for complete details.\u003c\/p\u003e\n\u003ch2\u003eCan I add any fillers to Sculpting Mix?\u003c\/h2\u003e\n\u003cp style=\"margin-left: 40px;\"\u003e- Other than pigments, no other additional fillers (i.e., metallic powders) are required or recommended.  If metallic powders are desired, they should be used with Winterstone Ultra Mix only.\u003c\/p\u003e\n\u003ch2\u003eHow thick should Sculpting Mix be applied?\u003c\/h2\u003e\n\u003cp style=\"margin-left: 40px;\"\u003e- Sculpting Mix should be applied in 1\/8\" to 1\/4\" layers up to a final outer \"shell\" thickness of 3\/8\" for small pieces,  1\/2 to 3\/4\" for life size and  3\/4\" to 1\" thick for monumental pieces.\u003c\/p\u003e\n\u003ch2\u003eWhat do I do if the Sculpting Mix starts to dry up in the container before I'm done?\u003c\/h2\u003e\n\u003cp style=\"margin-left: 40px;\"\u003e- Like any cement-type product it hardens if left still and it stays more workable if agitated.  Regularly mixing the batch in the container will keep it more workable longer. \u003cstrong\u003eAvoid using additional mix water to maintain a workable consistency. This principle applies to all 3 Winterstone products. \u003c\/strong\u003eIt is best to mix small batches to avoid waste.\u003c\/p\u003e\n\u003ch2\u003eDo I have to keep Sculpting Mix moist between layers?\u003c\/h2\u003e\n\u003cp style=\"margin-left: 40px;\"\u003e- Unlike clay, you can leave your sculpture for days, (weeks, months, years even!) between layers.  It should be dampened with a light spray before applying any fresh layers.\u003c\/p\u003e\n\u003ch2\u003eWhat is the yield of Sculpting Mix?\u003c\/h2\u003e\n\u003cp style=\"margin-left: 40px;\"\u003e- One pound of dry mix produces approx. 19 cu. in. of hardened end product.\u003c\/p\u003e\n\u003ch2\u003eHow much water do I use to make a batch of Sculpting Mix?\u003c\/h2\u003e\n\u003cp style=\"margin-left: 40px;\"\u003e- Generally you mix 4 parts mix to 1 part water.  (Technically 22-25 parts water to 100 parts Sculpting Mix by weight or volume).  After a short while, you will be able to mix batches intuitively to create the exact consistency you want.\u003c\/p\u003e\n\u003cp style=\"margin-left: 40px;\"\u003e- The strongest and most durable end product results from \u003cstrong\u003eusing as little mixing water as possible\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch2\u003eWhy use reinforcing techniques with Sculpting Mix?\u003c\/h2\u003e\n\u003cp style=\"margin-left: 40px;\"\u003e- Reinforcing techniques complement the inherent strength of Sculpting Mix so your sculpture withstands stresses and abuse.  This is especially important for outdoor sculptures which are subject to weather stress and public abuse.  The minimum recommended reinforcing for the outer \"shell\" thickness should be 1 layer of fiberglass mesh ARG (Alkaline Resistant Glass) per 1\/4\" thickness of \"shell\" or 1.5% of ARG chopped strand (by weight of dry mix).\u003c\/p\u003e\n\u003ch2\u003eHow much Sculpting Mix should I make at any one time?\u003c\/h2\u003e\n\u003cp style=\"margin-left: 40px;\"\u003e- Open working time is 40-50 minutes, so only mix as much as you can use within that time.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eWhat tools do I need to work with Sculpting Mix?\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp style=\"margin-left: 40px;\"\u003e- Plastic mixing container (i.e, yogurt, sour cream)\u003c\/p\u003e\n\u003cp style=\"margin-left: 40px;\"\u003e- Spray bottle\u003c\/p\u003e\n\u003cp style=\"margin-left: 40px;\"\u003e- Mixing tool (like a kitchen angled spatula or sandwich spreader)\u003c\/p\u003e\n\u003cp style=\"margin-left: 40px;\"\u003e- Application tool (small kitchen angled spatula or other tool depending on size of work)\u003c\/p\u003e\n\u003cp style=\"margin-left: 40px;\"\u003e- Levelling\/serrating tool (flexible serrated \"kidney\" shape thin metal tool)\u003c\/p\u003e\n\u003cp style=\"margin-left: 40px;\"\u003e- Wooden working base for temporary anchoring of sculpture\u003c\/p\u003e\n\u003cp style=\"margin-left: 40px;\"\u003e- Rubber pad for \"damp smoothing\" final layer\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"block-yui_3_17_2_101_1473439078355_39686\" class=\"sqs-block horizontalrule-block sqs-block-horizontalrule\" data-block-type=\"47\"\u003e\n\u003cdiv class=\"sqs-block-content\"\u003e\u003chr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"block-yui_3_17_2_101_1473439078355_39749\" class=\"sqs-block html-block sqs-block-html\" data-block-type=\"2\"\u003e\n\u003cdiv class=\"sqs-block-content\"\u003e\n\u003cdiv class=\"sqs-html-content\"\u003e\n\u003ch2\u003e\u003cstrong\u003eHow to Mix a batch of Sculpting Mix\u003c\/strong\u003e\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003ePlace the measured amount of dry mix into a mixing container.  Smaller amounts can be mixed by hand with a spatula in a plastic container.  Larger sculptures may require a 2 gallon pail and an electric mixing tool.\u003c\/li\u003e\n\u003cli\u003eAdd a small quantity of chopped fiberglass strand for reinforcement.  Mix the dry mix and strand together thoroughly.\u003c\/li\u003e\n\u003cli\u003eAdd the water to the powder\/strand and start to mix.  You can always add a bit more water if the mixture is too dry or a bit more dry mix if the mixture's too wet.  (Do not exceed maximum ratio of 1 part water to 4 parts Sculpting Mix to maintain maximum strength and durability.)  \u003c\/li\u003e\n\u003cli\u003eMix for 1 to 1.5 minutes, then let the mixture rest for a minute, then remix for another 1 to 1.5 minutes. It is recommended to regularly remix contents to maintain a workable consistency.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003e\u003cstrong\u003eMaking a Built-Up Sculpting Mix sculpture - Step by Step instructions\u003c\/strong\u003e\u003c\/h2\u003e\n\u003ch3\u003e1.  Make a Maquette\u003c\/h3\u003e\n\u003cp style=\"margin-left: 40px;\"\u003e- You've got an idea in your head of what you want to make.  Great!  Now turn that idea into a maquette - a sketch or small clay model\u003c\/p\u003e\n\u003cdiv id=\"block-yui_3_17_2_83_1473439078355_45015\" class=\"sqs-block html-block sqs-block-html\" data-block-type=\"2\"\u003e\n\u003cdiv class=\"sqs-block-content\"\u003e\n\u003cdiv class=\"sqs-html-content\"\u003e\n\u003ch3\u003e2. Prepare the Armature\u003c\/h3\u003e\n\u003cp style=\"margin-left: 40px;\"\u003e- Using the maquette, scale your idea up and determine what type of armature will work best for your project.  You can use styrofoam, wire, metallic mesh, and\/or metal rods.  Build the armature carefully.  If it is not well considered (or weakly constructed) it might end up sticking out of your sculpture or your sculpture could crack under stress)\u003c\/p\u003e\n\u003cdiv id=\"block-yui_3_17_2_83_1473439078355_49347\" class=\"sqs-block html-block sqs-block-html\" data-block-type=\"2\"\u003e\n\u003cdiv class=\"sqs-block-content\"\u003e\n\u003cdiv class=\"sqs-html-content\"\u003e\n\u003ch3\u003e3. Anchor the Armature with Sculpting Mix\u003c\/h3\u003e\n\u003cp style=\"margin-left: 40px;\"\u003e   - Mix a small batch of Sculpting Mix and secure the armature to the work surface.  Let this cure overnight before adding any more layers.\u003c\/p\u003e\n\u003cdiv id=\"block-yui_3_17_2_83_1473439078355_52528\" class=\"sqs-block html-block sqs-block-html\" data-block-type=\"2\"\u003e\n\u003cdiv class=\"sqs-block-content\"\u003e\n\u003cdiv class=\"sqs-html-content\"\u003e\n\u003ch3\u003e4. Modelling\u003c\/h3\u003e\n\u003cp style=\"margin-left: 40px;\"\u003e - The build-up may be achieved by applying successive layers of Sculpting Mix with fiberglass or steel mesh reinforcement between layers as needed.   \u003c\/p\u003e\n\u003cp style=\"margin-left: 40px;\"\u003e- It is essential that premature evaporation of water from the surface is avoided.  During application if the surface appears to be drying, re-wet these areas with a fine water mist\/spray.\u003c\/p\u003e\n\u003cp style=\"margin-left: 40px;\"\u003e- As you are finished a layer it's a good idea to roughen the surface with a serrated tool to create a \"tooth\" to add additional strength to the next layer's bond.  When you are done for the day you can lightly mist the sculpture, cover it loosely with plastic and leave it to cure overnight.\u003c\/p\u003e\n\u003cp style=\"margin-left: 40px;\"\u003e- When you return to add the next layer lightly mist the dry sculpture first.  Then add another layer as required.\u003c\/p\u003e\n\u003cp style=\"margin-left: 40px;\"\u003e- For the final surface layer approximately 10 to 20 minutes after application you can damp smooth with a rubber pad or dry sponge pad.  This will reduce the amount you'll need to sand to achieve a smooth surface.\u003c\/p\u003e\n\u003cp style=\"margin-left: 40px;\"\u003e- For the final layer ensure there is at least 1\/8\" of Winterstone applied over the top of the fibreglass mesh.  This will eliminate any read-through of the underlying mesh and will provide some thickness for sanding and polishing of the hardened piece.\u003c\/p\u003e\n\u003ch3\u003e5. Soft Carving\u003c\/h3\u003e\n\u003cp style=\"margin-left: 40px;\"\u003e- If you wish to use soft carving techniques, within a few hours of application, Winterstone sets to the degree that soft carving techniques can be used.  Afterwards you can add more Winterstone or finish the sculpture.\u003c\/p\u003e\n\u003ch3\u003e6.  Hard Carving\u003c\/h3\u003e\n\u003cp style=\"margin-left: 40px;\"\u003e- If you wish to use hard carving techniques, after 24 hours you can use a Dremel or similar type of hard caring tool.  Again, afterwards you can continue to add more layers if you wish or finish the piece.\u003c\/p\u003e\n\u003ch3\u003e7.  Drying\/Curing\u003c\/h3\u003e\n\u003cp style=\"margin-left: 40px;\"\u003e- You have finished adding Winterstone and are ready to start to finish the sculpture.  As before, at the end of the session loosely cover the sculpture with plastic to keep the moisture in for the initial 24 hours.  This is required for critical strength development.\u003c\/p\u003e\n\u003cp style=\"margin-left: 40px;\"\u003e- After 24 hours remove the plastic and let it air dry for an additional 48 hours.\u003c\/p\u003e\n\u003ch3\u003e8. Sanding\u003c\/h3\u003e\n\u003cp style=\"margin-left: 40px;\"\u003e- Rasps and sanding paper can be used as required.   Silicone Carbide Sandpapers #120, 180, 220, 320 \u0026amp; 400 are good to use.\u003c\/p\u003e\n\u003cp style=\"margin-left: 40px;\"\u003e- Winterstone gets harder and stronger every day it is left to dry.   If you wish to sand or rasp to achieve a super smooth surface, know that the longer you wait the less easily the Winterstone will be sanded away.\u003c\/p\u003e\n\u003cp style=\"margin-left: 40px;\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/B30qvngQpP8\" width=\"560\" height=\"314\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Winterstone","offers":[{"title":"5lb","offer_id":48019450069307,"sku":"841006","price":36.0,"currency_code":"USD","in_stock":true},{"title":"33lb Bag","offer_id":48019450102075,"sku":"841033","price":96.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/winterstone-sculpting-33.jpg?v=1711032054"},{"product_id":"winterstone-ultra","title":"Winterstone Ultra","description":"\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eHow is Ultra Mix different?\u003c\/h2\u003e\n\u003cp style=\"margin-left: 40px;\"\u003e- Ultra Mix is a rich, extra fine Winterstone formula with increased strength, toughness and bonding properties.  It is a casting medium ideal for face coats either brushed on or slush cast where the sculptor desires a more refined and highly polishable\/burnishable surface, or to achieve a metallic effect with or without the addition of metallic powders (iron, bronze, brass, etc.)\u003c\/p\u003e\n\u003ch2\u003eWhat effects can I create with Ultra Mix?\u003c\/h2\u003e\n\u003cp style=\"margin-left: 40px;\"\u003e- Here's just a few examples of effects you can create with Ultra Mix\u003c\/p\u003e\n\u003cdiv id=\"block-yui_3_17_2_93_1473439078355_25157\" class=\"sqs-block html-block sqs-block-html\" data-block-type=\"2\"\u003e\n\u003cdiv class=\"sqs-block-content\"\u003e\n\u003cdiv class=\"sqs-html-content\"\u003e\n\u003ch2\u003eHow much water do I use to make a batch of Ultra Mix?\u003c\/h2\u003e\n\u003cp style=\"margin-left: 40px;\"\u003e- Generally it is 1 part water to 3 parts dry mix.  (Technically 29-36 parts water per 100 parts dry mix by weight or volume.)  \u003c\/p\u003e\n\u003ch2\u003eWhat is the working time for Ultra Mix?\u003c\/h2\u003e\n\u003cp style=\"margin-left: 40px;\"\u003e- Ultra Mix has a pot life of 40-50 minutes.\u003c\/p\u003e\n\u003ch2\u003eHow much metallic powder can I add to Ultra Mix?\u003c\/h2\u003e\n\u003cp style=\"margin-left: 40px;\"\u003e- Added metallic powders should not exceed 1 part metallic to 4 parts Ultra Mix to create a metallic effect.  Together the metallic and ultra mix are considered the dry mix for measurement by volume purposes.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"block-yui_3_17_2_91_1473439078355_11899\" class=\"sqs-block horizontalrule-block sqs-block-horizontalrule\" data-block-type=\"47\"\u003e\n\u003cdiv class=\"sqs-block-content\"\u003e\u003chr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"block-yui_3_17_2_91_1473439078355_12766\" class=\"sqs-block html-block sqs-block-html\" data-block-type=\"2\"\u003e\n\u003cdiv class=\"sqs-block-content\"\u003e\n\u003cdiv class=\"sqs-html-content\"\u003e\n\u003ch2\u003e\u003cstrong\u003eUsing Ultra Mix to Achieve a \"Metallic\" Bronze Effect - Step-by-step instructions\u003c\/strong\u003e\u003c\/h2\u003e\n\u003ch3\u003e1A.  Cast sculpture\u003c\/h3\u003e\n\u003cp style=\"margin-left: 40px;\"\u003e- Add 1 part Burnt Umber Colorit-FX to 4 parts water.  Use this water to mix into the Ultra Mix dry powder (not necessary to add metallic powder).  Use this Ultra Mix for the face coat.  Using the same water, mix with Casting Mix and\/or Sculpting Mix for the backup layers until the desired thickness is achieved (using the same coloured water ensures that white will not show through).  After demolding clean seams\/make repairs as required using Ultra Mix and the same water mixture.  When finished allow sculpture to cure for 3 days\u003c\/p\u003e\n\u003cdiv id=\"block-yui_3_17_2_93_1473439078355_10455\" class=\"sqs-block html-block sqs-block-html\" data-block-type=\"2\"\u003e\n\u003cdiv class=\"sqs-block-content\"\u003e\n\u003cdiv class=\"sqs-html-content\"\u003e\n\u003ch3\u003e1B.  Built-up sculpture\u003c\/h3\u003e\n\u003cp style=\"margin-left: 40px;\"\u003e- If using Sculpting Mix to build-up a sculpture, build as normal until the last couple of layers utilizing water with 1 part Burnt Umber Colorit-FX to 4 parts water.  Use a thicker mix of Ultra Mix for the final 1 or 2 layers.  When finished allow sculpture to dry for 3 days.\u003c\/p\u003e\n\u003ch3\u003e2.  Surface patina\u003c\/h3\u003e\n\u003cp style=\"margin-left: 40px;\"\u003e- If the Winterstone sculpture was made without integrally pigmenting the Ultra Mix, an optional step to \"kill the white\" is to apply Antique Amber or other color reactive stain with a brush to the whole sculpture.  While still wet dab with a sponge to create a mottled\/blended effect.  Allow to dry.\u003c\/p\u003e\n\u003cp style=\"margin-left: 40px;\"\u003e- Mix a surface patina by combining Colorit-FX Yellow Ochre and Burnt Umber.  Dilute this mixture with 4 parts water then apply over sculpture with a brush.  This Colorit-FX will penetrate into the surface and bind with the Winterstone.  While still damp dab with a sponge to mottle\/blend the surface.  Allow to dry.\u003c\/p\u003e\n\u003cp style=\"margin-left: 40px;\"\u003e- Mix a darker surface patina by adding Colorit-FX Raw Umber to the existing diluted patina.  Apply into recessed areas of the sculpture with a brush.  This layer will also penetrate into the surface and bind with the Winterstone.  While still damp dab with a sponge to blend the surface.  Allow to dry for 24 hours.\u003c\/p\u003e\n\u003cp style=\"margin-left: 40px;\"\u003e- Using a \u003cstrong\u003esoft bristle brass brush\u003c\/strong\u003e selectively burnish the high spots leaving the depressions and textured areas untouched.  The following day the sculpture can have another session of burnishing for a more metallic\/glossy look.  \u003c\/p\u003e\n\u003cp style=\"margin-left: 40px;\"\u003e- Apply \u003cstrong\u003espray \u003c\/strong\u003e\"fixative\" sealer to burnished areas (e.g., Krylon brand Acrylic Clear Gloss.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Winterstone","offers":[{"title":"2lb","offer_id":48019450167611,"sku":null,"price":24.0,"currency_code":"USD","in_stock":true},{"title":"4lb","offer_id":48019450200379,"sku":"843007","price":36.0,"currency_code":"USD","in_stock":false},{"title":"44lb Pail","offer_id":48019450233147,"sku":"843044","price":164.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/winterultrapail.png?v=1711032060"},{"product_id":"ultrasealz-zfrc-40lb-bag","title":"UltrasealZ ZFRC 40lb Bag","description":"\u003cdiv id=\"prop65-message\" style=\"padding-top: 10px;\"\u003e\n\u003cimg src=\"https:\/\/www.smooth-on.com\/assets\/imgs\/prop65-alert.png\" style=\"width: 20px; vertical-align: text-bottom;\"\u003e \u003cstrong\u003eWARNING: \u003c\/strong\u003e Known to the state of CA to cause cancer, birth defects or reproductive harm - \u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"https:\/\/www.buddyrhodes.com\/prop-65-warning\/\"\u003e\u003c\/a\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"padding-top: 10px;\"\u003e\u003c\/div\u003e\n\u003cp\u003eUltrasealZ™ ZFRC admix is a multi component blend of slag cement, pozzolan, E+ and other chemical and mineral admixtures that when added to portland cement, produces high performance and acid resistant concrete. Formulated without plasticizer, specifically for use in GFRC mix designs.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/msds\/files\/1210_1_ULTRASEALZ_ZFRC.pdf\" target=\"_blank\" title=\"SDS\" rel=\"noopener\"\u003eSDS\u003c\/a\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/tb\/files\/ULTRASEALZ_ZFRC_ADMIXTURE_TDS.pdf\" target=\"_blank\" title=\"TDS\" rel=\"noopener\"\u003eTDS\u003c\/a\u003e\u003c\/p\u003e\n\u003c!----\u003e","brand":"Buddy Rhodes","offers":[{"title":"Default Title","offer_id":49232970973499,"sku":"10023854","price":83.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/109019_ultrasealz_zfrc_40lbs_1000x1000_03eb2243-fce7-446b-9b07-bfe72eaf5cd7.webp?v=1722378440"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/collections\/cementitious.jpg?v=1703100455","url":"https:\/\/maacaffestore.com\/collections\/cementitious-casting-compounds.oembed","provider":"The Compleat Sculptor, Inc","version":"1.0","type":"link"}