{"title":"Epoxy - Casting and Laminating Resins","description":"","products":[{"product_id":"105-epoxy-resin","title":"105 Epoxy Resin","description":"\u003cp\u003e105 Epoxy Resin is the base material on which all WEST SYSTEM 105 System epoxy compounds are built. It is a clear, pale yellow, low-viscosity liquid epoxy resin. Blended with hardener at the proper ratio, it cures to a hard, solid plastic with superior physical properties. Based on which hardener you choose, it cures at a wide range of temperatures.  Once cured, it forms a high-strength solid that is functionally waterproof, and highly resistant to moisture vapor.\u003c\/p\u003e\n\u003cp\u003eWe designed 105 Epoxy Resin to wet out and bond with wood fiber, fiberglass, and reinforcing fabrics. It also bonds well with a variety of metals.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/www.westsystem.com\/wp-content\/uploads\/West-System-Product-Selection-Chart.jpg\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eEpoxy vs. Esters\u003c\/p\u003e\n\u003cp\u003eWe’ve formulated 105 Epoxy Resin (and its corresponding hardeners) without volatile solvents. Unlike polyester or vinylester resins, our epoxy virtually does not shrink after curing. With a relatively high flash point and no solvent odor, it’s safer to use than styrenated resins.\u003c\/p\u003e\n\u003cp\u003eThickening Epoxy\u003c\/p\u003e\n\u003cp\u003eModifying this epoxy with WEST SYSTEM fillers creates an excellent structural adhesive or fairing compound. You choose the filler that suits your project. Epoxy thickened with adhesive (high-density) fillers makes structural bonds, bridges gaps, and fills voids. Epoxy thickened with fairing (low-density) fillers is easily sanded and shaped after it cures.\u003c\/p\u003e\n\u003cp\u003eCoating\u003c\/p\u003e\n\u003cp\u003eThis epoxy is also a great coating material.  Applied with a roller, it offers excellent thin-film characteristics. It will flow out and self-level without “fisheyeing.” By combining it with blush-free 207 Special Clear Hardener, you can create a natural finish. You’ll just need to add a couple of coats of varnish for UV protection. This is a good alternative that builds mil thickness quickly, saving time and effort. The results are long-lasting.\u003c\/p\u003e\n\u003cp\u003e105 Resin’s viscosity is approximately 1000 centipoise (cp) at 72 F (22C).\u003c\/p\u003e\n\u003cp\u003eMore Facts about WEST SYSTEM Epoxy \u003cstrong\u003eUsing gel coat over WEST SYSTEM 105 Epoxy Resin and Hardener\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt’s a myth that if you plan to gel coat over a repair, you must make the repair with polyester. We’ve used gel coat over epoxy for decades. It’s in our fiberglass boat repair videos and discussed it our magazine, Epoxyworks.\u003c\/p\u003e\n\u003cp\u003eThere are three key factors for success with gel coat over epoxy:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eMix your epoxy resin and hardener at the proper ratio (Mini Pumps make this a snap).\u003c\/li\u003e\n\u003cli\u003eAllow the epoxy to fully cured.\u003c\/li\u003e\n\u003cli\u003eBefore applying gel coat, remove any amine blush from the cured epoxy surface. Amine blush is simply an easily removed wax-like film that can form as a byproduct of the curing process. WEST SYSTEM 105 Resin\/207 Special Clear Hardener does not blush.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eGel coat manufacturers shy away from approving the use of non-air inhibited gel coat over epoxy because they’re concerned amine blush will interfere with the gel coat’s cure. All you need to do to remove the blush is wash the surface with plain water. It’s then ready for you to prep for paint or gel coat.\u003c\/p\u003e\n\u003cp\u003eThis process is even easier if you use Release fabric. This fabric is applied to uncured epoxy, protecting the surface from contamination. As the epoxy cures, any blush will form on the\u003cem\u003e outside\u003c\/em\u003e of the release fabric. Simply remove the release fabric after cure, and it will take the blush with it. The resulting surface is ready for you to prepare it for paint or gel coat.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEpoxy’s penetration into wood\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEpoxy does more than sit on the surface of the wood. Some epoxy will remain on wood surfaces, and some of it will penetrate into the wood. The amount of penetration depends mostly on how the wood fibers are oriented. Face grain will not absorb nearly as much epoxy as end grain. But since WEST SYSTEM Epoxy is very strong and an excellent adhesive, it strengthens the wood and makes it waterproof.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e105 Epoxy Resin batch size and cure speed\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYou need to know that in larger quantities, epoxy cures much faster. This is because epoxy generates heat as it cures and also cures faster at higher temperatures. This snowball effect increases until the epoxy cures—which in very large batches could take only a couple of minutes. Large pots of mixed epoxy can generate enough heat to cause a runaway exothermic reaction. This can include, smoking, melting the mixing cup or even starting a fire. Spreading epoxy thin allows the heat to dissipate and slows its cure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEpoxy casting \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWEST SYSTEM Epoxy has a very low percentage of shrinkage. In fact, the standards used to calculate shrinkage of other resins (polyester and vinyl ester) aren’t used with WEST SYSTEM because it shrinks so little to measure that way.\u003c\/p\u003e\n\u003cp\u003eWhen epoxy is used to fill holes drilled into wood, it will soak into the end grain. This might look like shrinkage, but it’s not.\u003c\/p\u003e\n\u003cp\u003eBack in the late ’70s and early ’80s, Gougeon Brothers Inc. manufactured over 4,000 wind turbine blades and their molds using WEST SYSTEM Epoxy. It was commonplace to see a 70-foot long mold shrink \u003cem\u003e3\/32″ over the entire 70-foot length\u003c\/em\u003e. That represents shrinkage of just .01% on a laminate consisting of fiberglass and WEST SYSTEM Epoxy.\u003c\/p\u003e\n\u003cp\u003eAvoiding exotherm when casting\u003c\/p\u003e\n\u003cp\u003eWhen casting epoxy, heat buildup can become an issue. Excessive heat can make WEST SYSTEM Epoxy can shrink some. Pouring epoxy in great depths creates the potential for the epoxy to get very hot due to the exothermic reaction resin and hardener have. While exotherm is a normal part of the curing process, you must always keep it under control. Do this by using smaller pours when casting, and working in a cool environment.\u003c\/p\u003e\n\u003cp\u003eAny shrinkage that does occur generally happens while the epoxy is still liquid, but when an intense amount of heat is present, epoxy doesn’t stay liquid for very long. As the heat dissipates, the difference in temperature between the top and bottom of the casting can shock the now solid epoxy and it may crack. To avoid this, make deep castings in layers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdding extra hardener (don’t)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhile adding extra catalyst to polyester resins can lead to a faster cure, you should \u003cstrong\u003enever add extra hardener to epoxy resin\u003c\/strong\u003e. Epoxy reaches cure when the resin molecules cross-link with hardener molecules. When there is too much of either resin or hardener, unlinked molecules are left over. This can result in uncured epoxy or compromised cure strength. Always mix epoxy resin and hardener as close as you can to the recommended ratio.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClamping force\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUnlike traditional wood glues, WEST SYSTEM Epoxy is stronger than wood. Because of this, it is beneficial to have some epoxy between the objects you are gluing together whether they are wood, fiberglass, or other materials. As long as the epoxy is contacting the entire surface of both substrates, no clamping pressure is needed.\u003c\/p\u003e\n\u003cp\u003eThe goal clamping is to simply ensure the epoxy \u003cem\u003econtacts the entire surface for the duration of the cure time\u003c\/em\u003e. Moderating clamp force is all you need. If you aren’t using a filler, and apply too much clamping force, this can result in a glue-starved joint. This makes future joint failure much more likely. Glue starved joints are weaker than their counterparts. Avoid glue-starved joints by following the one- or two-step bonding method.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFiller and Epoxy Strength\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhile certain fillers will increase the density of epoxy, this does not correlate to higher physical properties or increased adhesion strength. Epoxy is strongest without filler added to it, but the fillers are necessary to:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncrease the viscosity of the mix\u003c\/li\u003e\n\u003cli\u003eBridge gaps\u003c\/li\u003e\n\u003cli\u003ePrevent the epoxy from soaking too far into the wood\u003c\/li\u003e\n\u003cli\u003ePrevent glue-starved joints\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eEpoxy and Rotted Wood\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRot eats away the cellulose fiber in wood. Cellulose is the structure of the wood. Replacing it is not as simple as brushing on a coat of solvent-thinned epoxy. Solvented epoxy may replace some of the strength, but isn’t a permanent repair—it won’t restore the strength of the wood fibers. To make a permanent repair, replace the entire rotten area with fresh wood and sealed with epoxy. Addressing rot this way will make the repair area stronger than it was before the rot occurred.\u003c\/p\u003e\n\u003cp\u003eWhy remove rot?\u003c\/p\u003e\n\u003cp\u003eRot needs four major components in order to continue growing:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eFood\u003c\/li\u003e\n\u003cli\u003eMoisture\u003c\/li\u003e\n\u003cli\u003eOxygen\u003c\/li\u003e\n\u003cli\u003eWarmth\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eCutting off just one of these components is enough to cause the rot to go dormant. Solvented epoxies are supposed to cut off rot’s food source by encapsulating and contaminating the wood that the rot spores consume. However, the remaining three components: moisture, oxygen, and warmth, can still penetrate wood coated with solvented epoxy.\u003c\/p\u003e\n\u003cp\u003eThis is because solvented epoxy is a poor moisture barrier. Rot spores will remain in the wood, and even when encapsulated in solvented epoxy, they will only go dormant. Un-isolated rot pores will continue devouring the cellulose, causing more rot.\u003c\/p\u003e\n\u003cp\u003eThis is why we recommend removing the rotten wood and replacing it with fresh wood that is sealed with several coats of WEST SYSTEM Epoxy.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.westsystem.com\/wp-content\/uploads\/105-SDS.pdf\" rel=\"noopener\" target=\"_blank\"\u003eSDS\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan id=\"page66R_mcid50\" class=\"markedContent\"\u003e\u003cspan dir=\"ltr\" style=\"left: 299.989px; top: 1104.96px; font-size: 16.6px; font-family: serif; transform: scaleX(1.05122);\" role=\"presentation\"\u003eOver time, 105 Resin will thicken slightly and will therefore require extra care when\u003c\/span\u003e\u003cbr role=\"presentation\"\u003e\u003cspan dir=\"ltr\" style=\"left: 299.989px; top: 1124.96px; font-size: 16.6px; font-family: serif; transform: scaleX(1.03891);\" role=\"presentation\"\u003emixing. Repeated freeze\/thaw cycles during storage may cause crystallization of 105\u003c\/span\u003e\u003cbr role=\"presentation\"\u003e\u003cspan dir=\"ltr\" style=\"left: 299.989px; top: 1144.97px; font-size: 16.6px; font-family: serif; transform: scaleX(1.05128);\" role=\"presentation\"\u003eResin. Warm resin to 125°F and stir to dissolve crystals. Hardener may darken with age,\u003c\/span\u003e\u003cbr role=\"presentation\"\u003e\u003cspan dir=\"ltr\" style=\"left: 299.989px; top: 1164.97px; font-size: 16.6px; font-family: serif; transform: scaleX(1.04419);\" role=\"presentation\"\u003ebut physical properties are not affected by color. Be aware of a possible color shift if very\u003c\/span\u003e\u003cbr role=\"presentation\"\u003e\u003cspan dir=\"ltr\" style=\"left: 299.989px; top: 1184.97px; font-size: 16.6px; font-family: serif; transform: scaleX(1.06285);\" role=\"presentation\"\u003eold and new hardener are used on the same project.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"West System","offers":[{"title":"105A Quart","offer_id":48014329086267,"sku":"105-A","price":70.0,"currency_code":"USD","in_stock":true},{"title":"105B Gallon","offer_id":48014329119035,"sku":"105-B","price":155.0,"currency_code":"USD","in_stock":true},{"title":"105C 5 Gallon","offer_id":48014329184571,"sku":"105-C","price":460.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/105combo.jpg?v=1713649870"},{"product_id":"205-fast-epoxy-hardener","title":"205 Fast Epoxy Hardener","description":"\u003cp\u003e205 Fast Hardener is a medium-viscosity epoxy curing agent. It is useful in a majority of bonding situations, and at lower temperatures. 205 Fast Hardener produces a rapid epoxy cure that develops physical properties quickly at room temperature. Mix it with WEST SYSTEM 105 Resin in a five-part resin to one-part hardener ratio. The resulting cured epoxy is a rigid, high-strength, moisture-resistant solid. The combination of 105 Resin\/205 Fast Hardener has excellent bonding and coating properties.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e205 Fast Hardener is not intended for clear coating.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cbr\u003ePot Life at 72F (22C):\u003c\/strong\u003e 9 to 12 minutes\u003cbr\u003e\u003cstrong\u003eCures to a solid state:\u003c\/strong\u003e 6 to 8 hours\u003cbr\u003e\u003cstrong\u003eCures to maximum strength:\u003c\/strong\u003e 1 to 4 days\u003cbr\u003e\u003cstrong\u003eMinimum recommended temperature:\u003c\/strong\u003e 40°F (4°C)\u003c\/p\u003e\n\u003cp\u003eChoose 205 Fast Hardener for Cold-Weather Bonding\u003c\/p\u003e\n\u003cp\u003eWe’ve formulated 205 Fast Hardener to cure well at temperatures as low as 40°F (4°C). There are several things you can do to ensure a full cure when using epoxy in low temperatures.\u003c\/p\u003e\n\u003cp\u003ePre-Warm the Resin and Hardener\u003c\/p\u003e\n\u003cp\u003eCold temperatures increase an epoxy’s viscosity, making it harder to dispense, mix and apply. Warming resin and hardener reduces their viscosity so they flow easily through their dispensing pumps. To pre-warm, place the resin and hardener containers under a warming lamp or in a warm-water bath. Pre-warmed resins and hardeners will not cling as much to your mixing equipment. They’ll also blend more easily, ensuring thorough mixing. A warmer, lower-viscosity mixture flows smoothly during application and readily penetrates porous surfaces.\u003c\/p\u003e\n\u003cp\u003eDispensing and Mixing Epoxy in Cold Temperatures\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eAlways dispense 105 Resin and 205 Fast Hardener at the proper mixing ratio. Never alter the amount of hardener because this can seriously compromise the epoxy’s ultimate strength. WEST SYSTEM 300 Mini Pumps come ready to dispense the correct ratio of resin and hardener. One full pump-stroke of resin for every one full pump stroke of hardener is all you need to remember.\u003c\/li\u003e\n\u003cli\u003eRemember, cold epoxy resin and hardener are thicker and more difficult to pump. If you can’t pre-warm the resin and hardener, do not force the dispensing pumps up or down. Keep a steady pressure on each pump. Gradually make a full pump stroke downward, then let rise all the way up on its own.  When working with cold epoxy, give the pump head much more time to return to the top of the stroke.\u003c\/li\u003e\n\u003cli\u003eDispense the epoxy into a smaller diameter pot. This will increase the chemical reaction between resin and hardener. This is because a small pot has less surface area, which prevents heat from dissipating too quickly.\u003c\/li\u003e\n\u003cli\u003eStir the resin and hardener thoroughly for at least 2 minutes in a small pot. Scrape the sides and bottom of the pot. Use a mixing stick shaped to reach the pot’s corners. Let the mixed epoxy sit in the pot a little longer before applying.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003ePreparing Surfaces\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eBetween applying coats of epoxy, prepare the cured epoxy surfaces. When coating at cold temperatures, the slower cure can result in a waxy\/greasy film on the surface of the cured epoxy, called amine blush. Remove this byproduct of the curing process before you apply the next coat of epoxy. Amine blush is easy to wash away with plain water and a 3M Scotchbrite pad. Don’t let the water evaporate. Dry the surface with plain white paper towels. Don’t use rags, because they can contaminate the surface with laundry softeners and anti-cling ingredients.\u003c\/li\u003e\n\u003cli\u003eFinally, sand any remaining glossy areas with medium-grit sandpaper.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eAllow the Epoxy Extra Time to Cure\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eAllow the epoxy additional time to cure before you remove clamps or stress the joints. As a general rule, \u003cem\u003edouble the cure time for every 18°F (10°C) drop in temperature\u003c\/em\u003e. Allow even more cure time when for bonding pre-stressed joints, bent laminations, or joints that will undergo high loads.\u003c\/li\u003e\n\u003cli\u003eElevate the temperature of the partially cured epoxy. This can help the resin and hardener complete their cross-linking. It’s a good way to boost the epoxy’s physical properties, even after a week at cold temperatures.\u003c\/li\u003e\n\u003cli\u003eTo prevent thermal shock, elevate the temperature of the epoxied surface \u003cem\u003egradually\u003c\/em\u003e. Although any temperature increase will improve cross-linking, for best results, boost the temperature to 72°F (22°C) or warmer.\u003c\/li\u003e\n\u003cli\u003eFinal cure time depends on the hardener speed and the temperature the epoxy is exposed to. Generally, higher temperatures require shorter cure times. When applying heat to cure epoxy, don’t exceed 140°F (60°C).  Leave clamps in place until the epoxy has cooled.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eRead more about Cold-Temperature Bonding in Epoxy Basics, or at Epoxyworks.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.westsystem.com\/wp-content\/uploads\/205-SDS.pdf\" rel=\"noopener\" target=\"_blank\"\u003eSDS\u003c\/a\u003e\u003c\/p\u003e","brand":"West System","offers":[{"title":"205A 7oz","offer_id":48014369227067,"sku":"205-A","price":46.99,"currency_code":"USD","in_stock":true},{"title":"205B 27.5oz","offer_id":48014369259835,"sku":"205-B","price":94.99,"currency_code":"USD","in_stock":true},{"title":"205C 121oz","offer_id":48014369292603,"sku":"205-C","price":259.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/205combo.jpg?v=1713649899"},{"product_id":"206-slow-epoxy-hardener","title":"206 Slow Epoxy Hardener","description":"\u003cp\u003e206 Slow Hardener is a low-viscosity epoxy curing agent for use when extended working time or a longer cure time is needed. It also provides adequate working time at higher shop temperatures. When combined with 105 Resin in a five-part epoxy resin to one-part hardener ratio, the cured resin\/206 Slow Hardener mixture yields a rigid, high-strength, moisture-resistant solid with excellent bonding and barrier coating properties. 206 Slow Hardener is not intended for clear coating.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePot life at 72°F (22°C): 20 to 25 minutes\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eCure to a solid state: 10 to 15 hours\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eCure to maximum strength: 1 to 4 days\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eMinimum recommended temperature: 60°F (16°C)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNo Need for Excessive Clamping Force\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUnlike traditional wood glues, WEST SYSTEM 105 Resin-based epoxy mixtures including 105 Resin and 206 Slow Hardener are stronger than wood or many other substrates. Because of this, it is beneficial to have some epoxy between the objects you are gluing together. As long as the parts are held in place and epoxy is contacting the entire surface of both substrates, no clamping pressure is needed. With epoxy, the goal clamping is to simply ensure the epoxy contacts the entire surface for the duration of the cure time. Moderating clamp force is all that is required.\u003c\/p\u003e\n\u003cp\u003eIf an epoxy filler is not used and a high clamping force is used, the result can be a glue-starved joint which will make bond failure much more likely. Glue starved joints are weaker than their counterparts. Avoid glue-starved joints by following the one- or two-step bonding method.\u003c\/p\u003e\n\u003cp\u003eRead more about glue-starved joints and other epoxy considerations at Epoxyworks.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.westsystem.com\/wp-content\/uploads\/206-SDS.pdf\" rel=\"noopener\" target=\"_blank\"\u003eSDS\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"West System","offers":[{"title":"206A 7oz","offer_id":48014369521979,"sku":"206-A","price":39.99,"currency_code":"USD","in_stock":true},{"title":"206B 27.5oz","offer_id":48014369554747,"sku":"206-B","price":89.99,"currency_code":"USD","in_stock":true},{"title":"206C 121oz","offer_id":48014369587515,"sku":"206-C","price":249.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/206combo.jpg?v=1713649921"},{"product_id":"207-special-clear-hardener","title":"207 Special Clear Hardener","description":"\u003cp\u003eBlush-free 207 Special Clear Hardener was developed for coating and fiberglass cloth application where an exceptionally clear, moisture-resistant, natural wood finish is desired. Blended with 105 Epoxy Resin, 207 Hardener will not blush or turn cloudy in humid conditions. Thin film applications roll out and tip off smoothly, requiring less sanding in preparation for finish coatings.\u003c\/p\u003e\n\u003cp\u003eProfessional and first-time builders like 207 Special Clear Hardener because it is reliable, easy to use, as does not blush. Three coats or more can be applied in one day without additional surface preparation. Fewer coats are required to fill fiberglass weave and in most cases, the final coating can be sanded the following day. Boats can be built faster. Builders also appreciate the excellent fiberglass wet-out characteristics achieved with 105 Resin\/207 Special Clear Hardener, yet it won’t drain from vertical surfaces like the very slow curing, low-viscosity epoxies.\u003c\/p\u003e\n\u003cp\u003e105\/207 Epoxy has strong physical properties, so it can be used as a structural adhesive for gluing and laminating. It has excellent compatibility with paints and varnishes. An ultraviolet inhibitor in 207 Special Clear Hardener helps provide a beautiful, long-lasting finish when used with quality UV filtering varnish. 105\/207 cures clear and colorless.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMix Ratio: \u003c\/strong\u003e3 parts resin : 1 part hardener\u003cbr\u003e\u003cstrong\u003ePot life at 72°F (22°C):\u003c\/strong\u003e 20 to 26 minutes\u003cbr\u003e\u003cstrong\u003eCure to a solid state:\u003c\/strong\u003e 10 to 15 hours\u003cbr\u003e\u003cstrong\u003eCure to maximum strength:\u003c\/strong\u003e 4 to 7 days\u003cbr\u003e\u003cstrong\u003eMinimum recommended temperature:\u003c\/strong\u003e 60°F (16°C)\u003c\/p\u003e\n\u003cp\u003elear Casting Table Tops with 207 Special Clear Hardener\u003c\/p\u003e\n\u003cp\u003ePouring a thick coating or casting onto a table top, bar or counter top creates a popular effect. 207 Special Clear Hardener is especially well suited to these applications. A ¼” thick coating of 105 Resin and 207 Hardener is deep enough to cast objects such as memorabilia into the epoxy for decorative accents. Here is what you need to know when casting a clear epoxy coat over flat surfaces.\u003c\/p\u003e\n\u003cp\u003ePreparation for Casting 105 Epoxy Resin \/ 207 Special Clear Hardener\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSmall, solid objects like coins, bottle caps, mosaic tiles, pebbles, guitar picks, buttons, seashells, and sea glass, are great choices for casting into a layer of epoxy.\u003c\/li\u003e\n\u003cli\u003ePhotographs or postcards will darken and curl when wetted with the epoxy. To prevent this, first coat them with a craft decoupage glue like Mod Podge™.\u003c\/li\u003e\n\u003cli\u003ePorous materials such as burlap can trap a lot of air bubbles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBefore you get started, dam the perimeter of the surface you plan to coat. Duct tape around the bottom edge of the surface to prevent the epoxy from dripping. For coatings ¼” thick, tack a piece of stock molding with 6 mil plastic under it around the table’s perimeter. Make sure the surface is level and the temperature of the substrate is stable before pouring epoxy.\u003c\/p\u003e\n\u003cp\u003eTo prevent bubbles “outgassing” from the surface this, brush one or two thin coats of epoxy onto the surfaces. Allow this to reach gelation (about 6 hours at room temperature) before pouring epoxy. If you wait more than 18 hours before pouring your deeper layer of epoxy, be sure to sand the seal coating before pouring the epoxy mixture.\u003c\/p\u003e\n\u003cp\u003ePierce a hole in the bottom of a mixing pot. Cover this hole with duct tape. This will be your pouring vessel.\u003c\/p\u003e\n\u003cp\u003ePouring Epoxy\u003c\/p\u003e\n\u003cp\u003eWarming the resin and hardener to about 80°F before dispensing will the epoxy’s viscosity, enhancing 207 Special Clear Hardener’s good flow characteristics. Epoxy resin and hardener cans may be safely warmed in a water bath. To reduce bubbling, seal the surface before pouring the deeper coating.\u003c\/p\u003e\n\u003cp\u003eMix the 105 Resin and 207 Special Clear Hardener thoroughly in the pierced and taped mixing cup. Allow this mixture to stand for about one minute to allow the bubbles time to reach the surface so the epoxy is deaerated.  Peel back the duct tape covering the hole and allow this deaerated epoxy to flow onto the table surface. Pour close to the surface so the epoxy won’t splash and introduce air into the mixture.  Stop the hole with tape when the container is nearly empty so bubbly epoxy isn’t poured onto the surface.\u003c\/p\u003e\n\u003cp\u003eLimit the depth of the pour to ¼”. If a thicker layer is desired, allow the lower layer to set up before adding a new layer. Casting epoxy too thickly in a single pour, or casting more epoxy over a layer that has not set up can cause uncontrolled exotherm. This will ruin your project and could possibly destroy pieces of memorabilia you’ve placed in the casting.\u003c\/p\u003e\n\u003cp\u003eConsider the temperature of your work area when deciding how deep to pour. At warmer ambient temperatures, the epoxy will cure faster and generate more heat. Again, limit the depth of each pour, especially when working in warm conditions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRemoving Bubbles from a casting before cure\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA handheld propane torch or heat gun can be used to break the epoxy’s surface tension and help remove air bubbles. First, give the poured epoxy a couple of minutes to self-level. The bubbles should rise to the surface. Then move the heat source rapidly over the area (at roughly one foot per second) to avoid overheating the epoxy. You don’t want the heat source to make the epoxy gel or smoke.\u003c\/p\u003e\n\u003cp\u003eA Beautiful Finish\u003c\/p\u003e\n\u003cp\u003eAllow the final epoxy pour to cure for 24 hours before sanding the surface. When fully cured, the epoxy will sand to a dust. 105 Epoxy Resin with 207 Special Clear Hardener is compatible with many varnishes and polyurethanes. If your clear coated surface will be exposed to sunlight, add a topcoat of the UV protective varnish or a high-quality 2-part polyurethane.\u003c\/p\u003e\n\u003cp\u003eRead more about pouring 105\/207epoxy on a custom bar top in Epoxyworks.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.westsystem.com\/wp-content\/uploads\/207-SDS.pdf\" rel=\"noopener\" target=\"_blank\"\u003eSDS\u003c\/a\u003e\u003c\/p\u003e","brand":"West System","offers":[{"title":"207SA 10.6oz","offer_id":48014369980731,"sku":"207-SA","price":79.99,"currency_code":"USD","in_stock":false},{"title":"207SB 42.2oz","offer_id":48014370013499,"sku":"207-SB","price":149.99,"currency_code":"USD","in_stock":true},{"title":"207SC 185.6oz","offer_id":48014370046267,"sku":"207-SC","price":409.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/207combo.jpg?v=1713649939"},{"product_id":"magic-sculpt-magic-smooth","title":"Magic-Smooth","description":"\u003cp\u003eThis two-part epoxy is similar in use to Magic-Sculpt but it has a thinner consistency (a little thicker than Vaseline). Easily smoothed with water to a glassy finish, Magic-Smooth is used often for taxidermy projects but it is also great for sculpting. Magic-Smooth does \u003cstrong\u003enot dissolve foams \u003c\/strong\u003emaking it an ideal foam coat! Also it can be used to give texture to almost any surface and Magic-Smooth makes a great adhesive for many projects. Simply mix equal parts of both the A and B component, and the material will harden overnight. It will permanently adhere to almost any clean surface. Once dry, Magic-Smooth will accept most any type of paint and will not shrink or crack.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApproximate Coverage in 1\/4in thickness\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e16oz unit = .5 sq ft\u003c\/p\u003e\n\u003cp\u003e4lb unit = 2.5 sq ft\u003c\/p\u003e\n\u003cp\u003e2 gallon unit = 10 sq ft\u003c\/p\u003e","brand":"Magic-Sculpt","offers":[{"title":"16oz Kit","offer_id":48015005483323,"sku":"90EC151","price":36.0,"currency_code":"USD","in_stock":true},{"title":"4lb Kit","offer_id":48015005516091,"sku":"90EC15","price":94.0,"currency_code":"USD","in_stock":true},{"title":"2 Gallon Kit","offer_id":48015005548859,"sku":"90EC152","price":330.0,"currency_code":"USD","in_stock":true},{"title":"10 Gallon Kit","offer_id":48015005581627,"sku":"90EC153","price":1590.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/Magicsmooth16oz.png?v=1758985706"},{"product_id":"epic-epoxy-thinner-pint","title":"Epic™ Epoxy Thinner Pint (0.9 lbs. \/ 0.41 kg.)","description":"\u003cp\u003e\u003cstrong\u003eEpic™ Epoxy Thinner\u003c\/strong\u003e is a clear, water-like liquid that will lower the viscosity of Smooth-On casting and laminating epoxies. \u003cstrong\u003eEpic™\u003c\/strong\u003e can be added in different proportions to an epoxy system and improves flow-ability, making it easier to mix and pour. \u003cstrong\u003eEpic™\u003c\/strong\u003e will also aid in reducing bubble entrapment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEpic™ Epoxy Thinner\u003c\/strong\u003e IS NOT A SOLVENT, is not hazardous and contains no VOC’s or phthalates. Solvents that are commonly used to thin epoxies cause shrinkage. \u003cstrong\u003eEpic™\u003c\/strong\u003e is 100% reactive fluid, does not evaporate and does not cause shrinkage. \u003cstrong\u003eEpic™\u003c\/strong\u003e also facilitates higher filler loading and gives better wetting and impregnation.\u003c\/p\u003e\n\u003ch2\u003eInstructions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePREPARATION - \u003c\/strong\u003eStore and use all materials at 73°F \/ 23°C. Avoid breathing fumes - use in a well ventilated area at minimum. NIOSH approved respirator is recommended. Wear safety glasses, long sleeves and rubber gloves to minimize skin contact.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUSAGE -\u003c\/strong\u003e \u003cstrong\u003eEpic™ Thinner\u003c\/strong\u003e is added by weight. A gram scale is required. Read and follow directions given on the technical bulletin for the \u003cstrong\u003eEpoxAcast™\u003c\/strong\u003e or \u003cstrong\u003eEpoxAmite™\u003c\/strong\u003e product before adding \u003cstrong\u003eEpic™ Thinner\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp class=\"warning\"\u003eImportant - Physical and performance properties (including Shore hardness) of cured epoxy system may be lower in proportion to the amount of \u003cstrong\u003eEpic™ Thinner\u003c\/strong\u003e added. Do not exceed recommended loading maximum of 10% of epoxy Part A, as the epoxy system may not cure. A small scale test is recommended if outcome is uncertain.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMEASURING AND MIXING - \u003c\/strong\u003eAdd \u003cstrong\u003eEpic™ Thinner\u003c\/strong\u003e to Part A of the epoxy system and pre-mix thoroughly before adding Part B. Mix all parts thoroughly and apply. Usage Example - \u003cstrong\u003eEpic™\u003c\/strong\u003e Epoxy Thinner and \u003cstrong\u003eEpoxAmite™ 100\u003c\/strong\u003e with \u003cstrong\u003e101 Hardener\u003c\/strong\u003e 100g \u003cstrong\u003eEpoxAmite 100\u003c\/strong\u003e (Part A) + 5g \u003cstrong\u003eEpic™ Thinner \u003c\/strong\u003e(Mix Thoroughly) + 24g \u003cstrong\u003eEpoxAmite™ 101 Hardener \u003c\/strong\u003e(Part B) = Viscosity: 900 cps Shore Hardness: 84D\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/msds\/files\/Epoxy_Thinner.pdf\" rel=\"noopener\" target=\"_blank\"\u003eSDS\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/tb\/files\/EPIC_EPOXY_THINNER_TB.pdf\" rel=\"noopener\" target=\"_blank\"\u003eTechnical Sheet\u003c\/a\u003e\u003c\/p\u003e","brand":"Smooth-On","offers":[{"title":"Default","offer_id":48015193014587,"sku":"73542","price":16.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/epic-epoxy-thinner-trial-533x400.jpg?v=1748722758"},{"product_id":"art-pro-epoxy","title":"Art Pro Epoxy","description":"\u003cp\u003eArt Pro is an easy to use, low viscosity system resin art epoxy that provides an extended working time that allows users to create beautiful, high gloss pieces of art resin. For use with pigment powders, alcohol ink and acrylic paints to create a wide range of stunning resin art.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures and Benefits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1:1 mix ratio by volume\u003c\/li\u003e\n\u003cli\u003e60 min working time at 75˚F\u003c\/li\u003e\n\u003cli\u003eImproved UV stability\u003c\/li\u003e\n\u003cli\u003eGreat flow for color blending\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWORKING CONDITIONS:\u003cbr\u003eFor best results all materials and workspace should be maintained at 70F-80F. Epoxy is a temperature sensitive material.\u003cbr\u003eWhen cool it’s thicker and sets slower. When warm it’s thinner and sets faster. When the material or working conditions are\u003cbr\u003ebelow 70F, Art Pro may become too viscous to properly release air and self-level. Working in conditions with material above\u003cbr\u003e80F, Art Pro may set too quickly and become too hot and exotherm, which could cause it to yellow, distort or crack.\u003c\/p\u003e\n\u003cp\u003eSURFACE PREP:\u003cbr\u003eAll surfaces must be clean, dry and free of contamination. Contaminants include, but are not limited to dust, oil, moisture, sap,\u003cbr\u003elint, and sanding debris. Allow paint and other elements to fully dry before overcoating with epoxy, preform small scale cure\u003cbr\u003etest if unsure about compatibility. Do not use paper towels, dirty rags, contaminated sandpaper, or touch the surface with oily\u003cbr\u003efingers. Sand as needed and clean off sanding debris. Wipe surface down with a clean cotton t-shirt rag soaked in an oil free\u003cbr\u003esolvent like denatured alcohol prior to applying epoxy seal coat. Always use clean dry tools for mixing and applying.\u003c\/p\u003e\n\u003cp\u003eMIXING:\u003cbr\u003eCombine 1-part Art Pro Resin to 1-part Art Pro Hardener (1A:1B) by volume, or 100-parts resin to 84-parts hardener (100A:84B)\u003cbr\u003eby weight. Using the recommended mix ratio is VERY important when using epoxy. DO NOT deviate to attempt to speed up\u003cbr\u003eor slow down the gel time. Mix 1-2 minutes while scraping sides and bottom of container occasionally until no streaks or\u003cbr\u003estriations. Add colored pigment powder or dye to mixture if desired. Transfer to second clean\/dust free container, and mix 1-\u003cbr\u003e2 minutes again until fully blended. Let sit for 1-2 minutes to allow air bubbles a chance to start rising to surface, and then use\u003cbr\u003eimmediately. Do not scrape from the bottom or sides when pouring as this can introduce unmixed material to your project.\u003cbr\u003eTake extra care not to whip in excess air. The whole mixing process shouldn’t take more than 5-10 minutes. If the mixed\u003cbr\u003ematerial starts to get warm, that’s your last warning the curing reaction is starting to take place and you need to get the epoxy\u003cbr\u003epoured onto your surface ASAP.\u003c\/p\u003e\n\u003cp\u003eSTORAGE AND CRYSTALLIZATION:\u003cbr\u003eStore between 60-90F in a dry place. After use, tightly reseal all containers and store products on a raised surface during cold\u003cbr\u003eweather and avoid storing near outside walls or doors. If available, Purge with dry nitrogen to preserve color and minimize\u003cbr\u003emoisture contamination. Do not allow to freeze during winter storage. Do not use material with any signs of crystallization\u003cbr\u003esuch as solid chunks, grainy texture or white color. Crystallization can be reversed by heating the material to 125-140F, and\u003cbr\u003estirring occasionally, until all crystals dissolve.\u003c\/p\u003e\n\u003cp\u003eSAFETY HANDLING:\u003cbr\u003eWear protective gloves, clothing, and eye\/face protection. Use only outdoors or in a well-ventilated area. Avoid contact to\u003cbr\u003ethe skin and eyes. Avoid breathing dust, fumes, gas mist, vapors and spray. Wash hands thoroughly after handling. Take off\u003cbr\u003econtaminated clothing and wash before reuse. These products may cause skin and respiratory allergic reactions. Consult\u003cbr\u003eproduct Safety Data Sheets for complete precautions for use of this product.\u003c\/p\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" href=\"https:\/\/masepoxies.com\/content\/pdf\/Art-Pro-Instructions-for-Use.pdf\" target=\"_blank\"\u003eDetailed Instructions\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" href=\"https:\/\/masepoxies.com\/content\/pdf\/MAS-ART-PRO-RESIN-SDS.pdf\" target=\"_blank\"\u003eResin SDS\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" href=\"https:\/\/masepoxies.com\/content\/pdf\/MAS-Art-Pro-Hardener-SDS.pdf\" target=\"_blank\"\u003eHardener SDS\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"MAS","offers":[{"title":"Quart Kit","offer_id":48015602712891,"sku":null,"price":83.0,"currency_code":"USD","in_stock":false},{"title":"1 Gallon Kit","offer_id":48015602745659,"sku":null,"price":125.0,"currency_code":"USD","in_stock":false},{"title":"2 Gallon Kit","offer_id":48015602778427,"sku":null,"price":199.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/artpro2gallon.png?v=1710987025"},{"product_id":"ccr-clear-casting-epoxy-resin","title":"CCR Clear Casting Epoxy Resin","description":"\u003cp\u003eCCR - Clear Casting Epoxy Resin is a clear, UV-stabilized epoxy system designed specifically for casting, potting, and embedding applications. Low color and low viscosity allow for bubble-free, crystal-clear castings ideal for art and hobby applications. This Super Sap® Formulation features two hardener speeds: slow (CCS) for high-build casting epoxy applications and fast (CCF) for quick, small project fast casting epoxy applications such as resin jewelry and more.\u003c\/p\u003e\n\u003cp\u003eAvailable in FAST (CCF Clear Casting Fast Hardener) and SLOW (CCS Clear Casting Slow Hardener) cure speeds.\u003c\/p\u003e\n\u003cp\u003eFast Cure: 90 min pot life, 24 HR tack-free time.\u003c\/p\u003e\n\u003cp\u003eSlow Cure: 360 min pot life, 72 HR tack-free time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTwo-part epoxy kits are comprised of Super Sap CCR Clear Casting Resin and CCF Clear Casting Fast Hardener or CCS Clear Casting Slow Hardener.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eNote: CCF FAST hardener should ONLY be used for low-volume (less than 1 pint) casting applications with thicknesses below 1″. Using CCF FAST hardener for larger volumes or thicknesses can result in exothermic cures that will damage the epoxy.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBest Uses\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEncapsulation or Embedding\u003c\/li\u003e\n\u003cli\u003eBar Top Epoxy\u003c\/li\u003e\n\u003cli\u003eResin Jewelry\u003c\/li\u003e\n\u003cli\u003eResin Castings\u003c\/li\u003e\n\u003cli\u003eMolding Resin\u003c\/li\u003e\n\u003cli\u003eArt, Hobby, Craft Resin\u003c\/li\u003e\n\u003cli\u003eHigh-Build Coatings\u003c\/li\u003e\n\u003cli\u003eMass Castings (SLOW only)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eApplication Tips:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWhen working at higher temperatures, make smaller pours to avoid excessive exotherm. Epoxy cures at lower temperatures.\u003c\/li\u003e\n\u003cli\u003eSmall castings will benefit from a post-cure of 100° F (38°C) for 24 hours to assure full cure.\u003c\/li\u003e\n\u003cli\u003eFor best results, measure the two components by weight within 5% of the recommended mix ratio.\u003c\/li\u003e\n\u003cli\u003eAlways mix product for at least two minutes, scraping the container to ensure complete mixing.\u003c\/li\u003e\n\u003cli\u003eUse products in a controlled environment. Avoid high humidity and cold temperatures.\u003c\/li\u003e\n\u003cli\u003eAmine blush, a by-product of the curing process, appears as a wax-like film cured epoxy and is more noticeable in cool, moist conditions. It can clog sandpaper and inhibit subsequent bonding. Blush is water-soluble and easily removed with clean water (not solvent) and an abrasive pad.\u003c\/li\u003e\n\u003cli\u003eFor good adhesion, epoxy bonding surfaces should be clean, dry, and sanded.\u003c\/li\u003e\n\u003cli\u003eIf unfamiliar with the product, create smaller test samples before starting a larger-scale project.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" href=\"https:\/\/entropyresins.com\/app\/uploads\/CCR-SDS.pdf\" target=\"_blank\"\u003eSDS\u003c\/a\u003e\u003c\/p\u003e","brand":"Entropy Resins","offers":[{"title":"3 Quart CCF Fast Kit","offer_id":48015604515131,"sku":null,"price":145.0,"currency_code":"USD","in_stock":false},{"title":"1.5 Gallon CCF Fast Kit","offer_id":48015604482363,"sku":null,"price":194.99,"currency_code":"USD","in_stock":false},{"title":"48oz CCS Slow Kit Size Discontinued","offer_id":48015604646203,"sku":null,"price":92.99,"currency_code":"USD","in_stock":true},{"title":"3 Quart CCS Slow Kit","offer_id":48015604613435,"sku":null,"price":145.0,"currency_code":"USD","in_stock":true},{"title":"1.5 Gallon CCS Slow Kit","offer_id":48015604580667,"sku":null,"price":194.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/ccr-ccf-15.jpg?v=1710987036"},{"product_id":"epoxacast-690","title":"EpoxAcast™ 690","description":"\u003cp\u003e\u003cstrong\u003eEpoxAcast™ 690\u003c\/strong\u003e is a clear casting epoxy resin suitable for a variety of industrial and art-related projects requiring a rigid, clear finished casting. It is mixed 100A:30B by weight (gram scale required) and features a very low viscosity for easy mixing and minimal bubble entrapment. Working time is 5 hours and cure time is 24 hours at room temperature. Castings cure with negligible shrinkage and are very hard and strong. Resin can be colored with\u003cstrong\u003e UVO™\u003c\/strong\u003e or\u003cstrong\u003e IGNITE™\u003c\/strong\u003e colorants. This product is not moisture sensitive and can be used in humid environments. Recommended casting thickness maximum per layer is 3\/8 in. \/ 0.95 cm.\u003c\/p\u003e\n\u003cp\u003eFeatures\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOptically clear\u003c\/li\u003e\n\u003cli\u003ePerfect for lenses or encapsulation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg height=\"715\" width=\"530\" alt=\"\" src=\"https:\/\/cdn.shoplightspeed.com\/shops\/606431\/files\/56948373\/epoxacast690692specs.png\"\u003e\u003c\/p\u003e\n\u003cp\u003eInstructions\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003ePreparation\u003c\/strong\u003e\u003c\/em\u003e – Avoid breathing fumes - use in a well ventilated area at minimum. NIOSH approved respirator is recommended. Wear safety glasses, long sleeves and rubber gloves to minimize skin contact.\u003c\/p\u003e\n\u003cp\u003eMaterials should be stored and used in a room temperature environment (73°F\/23°C). Elevated temperatures will reduce Pot Life. \u003cstrong\u003eEpoxAcast™ 690\u003c\/strong\u003e Resin and Hardener must be properly measured and thoroughly mixed to achieve full, highstrength, solid-cure properties.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eBecause no two applications are quite the same, a small test application to determine suitability for your project is recommended if performance of this material is in question.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eApplying A Release Agent\u003c\/strong\u003e\u003c\/em\u003e – For releasing epoxy from non-porous surfaces such as resin, metal, glass etc., use \u003cstrong\u003eEase Release™ 200 or 205\u003c\/strong\u003e (available from Smooth-On) to prevent adhesion.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT:\u003c\/strong\u003e To ensure thorough coverage, lightly brush the release agent with a soft brush over all surfaces of the mold or model. Follow with a light mist coating and let the release agent dry for 30 minutes.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eMeasuring \/ Dispensing\u003c\/strong\u003e\u003c\/em\u003e – The proper mixing ratio is 100 parts of EpoxAcast™ 690 resin to 30 parts hardener by weight. \u003cstrong\u003eYou must use an accurate scale (gram scale or triple beam balance scale) to weigh these components properly. Do not attempt to measure components by volume.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMixing tools and containers should be clean and dry. Mixing should be done in a well ventilated area. Wear safety glasses, long sleeves and rubber gloves to minimize contamination risk. Combine \u003cstrong\u003eEpoxAcast™ 690\u003c\/strong\u003e resin with the appropriate amount of hardener. Mix thoroughly for 3 minutes making sure that you scrape the bottom and sides of the container several times.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eAdding Color\u003c\/strong\u003e\u003c\/em\u003e - \u003cstrong\u003eEpoxAcast™ 690\u003c\/strong\u003e can be colored with \u003cstrong\u003eUVO™\u003c\/strong\u003e or \u003cstrong\u003eIGNITE™\u003c\/strong\u003e colorants or \u003cstrong\u003eCast Magic™ \u003c\/strong\u003eEffects Fillers. Pre-mix color or filler with Part A thoroughly and then add Part B.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eMixing\u003c\/strong\u003e\u003c\/em\u003e – Be sure mixing utensils are clean and free of any potential contaminants such as dirt, dust or grease. Mix Parts A and B thoroughly for at least 3 minutes with a square edged mixing stick. Be aggressive and scrape sides and bottom of mixing container several times. Use the square edge of mixing stick to bring material off of the sides of container and blend. \u003cstrong\u003eIf using a drill mixer,\u003c\/strong\u003e follow with hand mixing as directed above to ensure thorough mixing.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eAdding Fillers\u003c\/strong\u003e\u003c\/em\u003e - A variety of dry fillers can be added. Pre-mix dry filler with Part A before adding Part B.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eIncreasing Flexibility \u003c\/em\u003e-\u003c\/strong\u003e \u003cstrong\u003eFlexer™ Epoxy Flexibilizer\u003c\/strong\u003e is a clear, low viscosity liquid additive that will lower the durometer (Shore hardness) of some SmoothOn casting and laminating epoxies. When added to the epoxy system in the proper proportion, the cured epoxy will be softer and, in some cases, can be made semi-rigid. See the \u003cstrong\u003eFlexer™\u003c\/strong\u003e Technical Bulletin for more information.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT:\u003c\/strong\u003e Mixed \u003cstrong\u003eEpoxAcast™ 690\u003c\/strong\u003e is exothermic, meaning it generates heat. A concentrated mass of mixed epoxy in a confined area such as a mixing container can generate enough heat to melt a plastic cup, burn skin or ignite combustible materials if left to stand for its full Pot Life. Do not use foam or glass mixing containers or pour sections thicker than 3\/8 in. \/ 0.95 cm. If a batch of mixed epoxy begins to exotherm, move it to an open air environment.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003ePouring\u003c\/strong\u003e\u003c\/em\u003e – If casting \u003cstrong\u003eEpoxAcast™ 690\u003c\/strong\u003e into a rubber mold, pour mixture in a single spot at the lowest point of the mold or enclosure. Let the mixture seek its level. A uniform flow will help minimize entrapped air. Recommended casting thickness maximum 3\/8 in. \/ 0.95 cm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLayer Pouring -\u003c\/strong\u003e When pouring \u003cstrong\u003eEpoxAcast™ 690\u003c\/strong\u003e in layers, allow previous layer to fully cure and come to room temperature (73°F \/ 23°C) before pouring additional layers.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eCure Time:\u003c\/strong\u003e\u003c\/em\u003e Refer to specified \u003cstrong\u003eCure Times\u003c\/strong\u003e at room temperature depending on mass. Cured material will be hard and unable to penetrate with a finger nail. Cured epoxy can now be dry sanded. \u003cem\u003eIf machining or sanding, wear NIOSH approved mask to prevent inhalation of particles.\u003c\/em\u003e \u003cstrong\u003ePot Life and Cure Time values are dependent on mass and mold configuration, as epoxies are mass-sensitive.\u003c\/strong\u003e Let cure for 24 hours at room temperature. Castings that are ¼ in. thickness or less will cure more slowly and may require up to 48 hours to fully cure at room temperature.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003ePerformance:\u003c\/strong\u003e\u003c\/em\u003e Cured castings are very hard and durable. They resist moisture, moderate heat, solvents, dilute acids and can be machined, primed\/ painted or bonded to other surfaces (any release agent must be removed). If machining castings, wear dust mask or other apparatus to prevent inhalation of residual particles.\u003c\/p\u003e\n\u003cp\u003eCastings can be displayed outdoors after painting with an aliphatic urethane clear coat. Unpainted castings will yellow after being exposed to UV light or excessive heat above 115°F\/46°C. For longer outdoor UV resistance of an unpainted clear part, Smooth-On’s \u003cstrong\u003eCrystal Clear™\u003c\/strong\u003e Urethane Resin may be an option for your application.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBecause no two applications are the same, a small test application to determine suitability is recommended if performance of this material is in question.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003ePainting\u003c\/strong\u003e\u003c\/em\u003e – Cured \u003cstrong\u003eEpoxAcast™ 690\u003c\/strong\u003e can be painted and \/ or primed and then painted with acrylic enamel paints. Let paint fully dry before putting part into service.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eRemoving Epoxy\u003c\/strong\u003e\u003c\/em\u003e – \u003cstrong\u003e\u003cem\u003eUncured \/ Non-curing epoxy\u003c\/em\u003e:\u003c\/strong\u003e Scrape as much material as possible from the surface using a scraper. Clean the residue with \u003cstrong\u003eE-POX-EE KLEENER™\u003c\/strong\u003e available from Smooth-On, lacquer thinner, acetone or alcohol. Follow safety warnings pertaining to solvents and provide adequate ventilation.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ch3\u003eTechnical and Related Documents\u003c\/h3\u003e\n\u003cdiv\u003e\u003ca class=\"primary-trim\" href=\"https:\/\/www.smooth-on.com\/tb\/files\/EPOXACAST_690_692_TB.pdf\" target=\"_blank\"\u003eTechnical Bulletin\u003c\/a\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ca class=\"primary-trim\" href=\"https:\/\/www.smooth-on.com\/tb\/files\/CREATING_EPOXY_TABLES.pdf\" target=\"_blank\"\u003eCreating Epoxy Tables\u003c\/a\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch3\u003eSafety Data Sheets\u003c\/h3\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch3\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/sds\/10004384-10004366.pdf\" target=\"_blank\"\u003eEpoxAcast 690 SDS \u003cspan class=\"sdslang\"\u003e| English\u003c\/span\u003e\u003c\/a\u003e\u003c\/h3\u003e\n\u003cspan class=\"sdselect\"\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" href=\"https:\/\/www.smooth-on.com\/msds\/files\/EpoxAcast_690.pdf\" target=\"_blank\"\u003e\u003c\/a\u003eFor Industrial Use Only. \u003cbr\u003eKeep Out of the Reach of Children. \u003cbr\u003e\u003cstrong\u003eWARNING: \u003c\/strong\u003eProp 65 Notice\u003c\/p\u003e","brand":"Smooth-On","offers":[{"title":"Trial Kit (2.6 lbs. \/ 1.18 kg.)","offer_id":48015605793083,"sku":"3642","price":49.99,"currency_code":"USD","in_stock":false},{"title":"Gallon Kit (10.4 lbs. \/ 4.72 kg.)","offer_id":48015605760315,"sku":"3661","price":150.99,"currency_code":"USD","in_stock":false},{"title":"5 Gallon Kit (45.5 lbs. \/ 20.64 kg.)","offer_id":48015605727547,"sku":"3671","price":534.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/EpoxAcast-690-combo-1400x1050.jpg?v=1748722932"},{"product_id":"easycast-clear-casting-resin","title":"EasyCast Clear Casting Resin","description":"\u003cp\u003eEasyCast is a two component, \u003cem\u003elow odor\u003c\/em\u003e, solvent free, clear casting epoxy. It’s ideal for casting small decorative items such as kitchen and bathroom knobs or for surface coatings up to 3\/8 inch in thickness. Color EasyCast with Castin’ Craft opaque pigments for solid colors, transparent dyes for that colored glass look. Mix and pour EasyCast into any of the Castin’ Craft MC Molds to create your own decorative castings. Read complete instructions prior to use.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIdeal for coatings or castings up to 3\/8\" thick\u003c\/li\u003e\n\u003cli\u003eAdditional layering can be done for added depth\u003c\/li\u003e\n\u003cli\u003eConvenient 1:1 mix ratio by volume\u003c\/li\u003e\n\u003cli\u003e20-30 minute working time \/ 8-12 hour tack-free time\u003c\/li\u003e\n\u003cli\u003eFull cure in 72 hours\u003c\/li\u003e\n\u003cli\u003eFDA Compliant (FDA 21 CFR 175.300) when accurately measured, thoroughly mixed, and fully cured. \u003c\/li\u003e\n\u003cli\u003eProduces durable castings or coatings that are high-gloss \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWhat's included:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e32 oz. Kit\u003c\/strong\u003e = 16oz. A + 16oz. B\u003cbr\u003e\u003cstrong\u003e1 gal. Kit\u003c\/strong\u003e = .5 gal. A + .5 gal. B\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/eti-usa.com\/content\/pdfs\/ETI_instructions_easycastclear_10-27-2020.pdf\" rel=\"noopener\" target=\"_blank\"\u003eInstructions\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/eti-usa.com\/content\/pdfs\/Easy_Cast_Resin_Hardener_Combined.pdf\" rel=\"noopener\" target=\"_blank\"\u003eSDS\u003c\/a\u003e\u003c\/p\u003e","brand":"ETI","offers":[{"title":"Quart Kit","offer_id":48015606776123,"sku":"6233032","price":42.0,"currency_code":"USD","in_stock":true},{"title":"Gallon Kit","offer_id":48015606808891,"sku":"33128","price":128.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/eti-easycast-family-all-79396.jpg?v=1710987058"},{"product_id":"deep-pour-x-epoxy","title":"Deep Pour X Epoxy","description":"\u003cp\u003eDeep Pour X is a high-performance epoxy casting system formulated with an extra slow cure time allowing up to 3” pours. This system is extremely durable, with excellent air release, low exotherm, 100% solids and no VOC’s.  Maintain material and shop temperatures between 60F-80F throughout casting process, cooler is better.  This formula is specifically designed for thicker pours, with a minimum recommended casting depth of 2” depending on your working conditions. \u003cem\u003eNot compatible with 2:1 pumps.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003ca rel=\"noopener\" href=\"https:\/\/masepoxies.com\/content\/pdf\/Deep-Pour-X-Instructions-for-Use.pdf\" target=\"_blank\"\u003eInstructions\u003c\/a\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003ePlease take into consideration the volume of epoxy you pour into a void. Pouring too much epoxy into a large area may result in shrinking, yellowing or cracking. Keeping the work area cool by adding a fan can help reduce the risk of the epoxy overheating.\u003c\/p\u003e\n\u003cp\u003eWorking Conditions:\u003c\/p\u003e\n\u003cp\u003eFor best results, all materials and working conditions should be maintained at a constant 60°F-80°F. Epoxy is a temperature sensitive material. When cool, it’s thicker and sets slower. When warm, it’s thinner and sets faster. Working in a shop or with material above 80°F, Deep Pour X may set too quickly and exotherm (become too hot) which could cause it to yellow, distort, shrink or crack. As a general rule, thicker pours require cooler working conditions. An air conditioned workspace is recommended. \u003cstrong\u003ePLEASE NOTE: This is an advanced deep pour epoxy resin system. DO NOT use Deep Pour X resin in working temperatures above 85°F.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMaximum Casting Thickness:\u003c\/p\u003e\n\u003cp\u003eMax casting thickness can vary depending on a number of factors including shop temp, material temp, mixing quantity, mold material, project dimensions, etc. Every project is unique, but as a general guideline Deep Pour X should be poured 2-3” thick per pour. Pouring under 2” will take 48-72 hours to cure. Pouring over 3” may result in yellowing, shrinking or cracking. Allow air flow underneath and around mold to help dissipate heat. Step pour multiple layers for thicker castings.\u003c\/p\u003e\n\u003cp\u003e  Exothermic Reaction:\u003c\/p\u003e\n\u003cp\u003eCAUTION EXOTHERMIC REACTION: Mixed epoxy generates heat. The more you mix, the hotter it will be. Must use after mixing. Only mix what you are ready to pour. May fume and smoke. Please visit the online FAQ before starting your project.\u003c\/p\u003e\n\u003cp\u003eSeal Coat:\u003c\/p\u003e\n\u003cp\u003eAlways apply a seal coat before coating or casting against bare wood or porous surfaces. To start, the surface must be clean, dry and free of contamination. Next, apply a thin coat of mixed epoxy to surface. Take care to cover and seal any voids or cracks present. Allow the seal coat to cure to a rock hard solid, and sand with 80-120 grit paper, paying special attention to imperfections such as air bubbles. Lastly, wipe clean with a cotton t-shirt rag and denatured alcohol. The purpose of a seal coat is to minimize the effects of off gassing by creating a thin air-tight barrier between a porous wooden surface and Deep Pour X epoxy so air bubbles won’t percolate up through the curing epoxy creating cosmetic defects. Residual moisture in an unsealed surface will result in foaming. We recommend sealing with the MAS 2:1 Clear Epoxy System, MAS Penetrating Epoxy Sealer, or MAS Table Top. Deep Pour X is an EXTREMELY slow curing system by design. We DO NOT recommend using Deep Pour X for seal coat, as you will need to wait 2+ days for seal coat to cure to the point where it can be sanded and cleaned before continuing.\u003c\/p\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" href=\"https:\/\/masepoxies.com\/content\/pdf\/MAS-DEEP-POUR-X-RESIN-SDS.pdf\" target=\"_blank\"\u003eResin SDS\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" href=\"https:\/\/masepoxies.com\/content\/pdf\/MAS-DEEP-POUR-X-HARDENER-SDS.pdf\" target=\"_blank\"\u003eHardener SDS\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e  \u003c\/p\u003e","brand":"MAS","offers":[{"title":"1.5 Gallon Kit","offer_id":48015609626939,"sku":null,"price":218.0,"currency_code":"USD","in_stock":true},{"title":"3 Gallon Kit","offer_id":48015609692475,"sku":null,"price":420.0,"currency_code":"USD","in_stock":false},{"title":"6 Gallon Kit","offer_id":48015609659707,"sku":null,"price":810.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/deepx3.jpg?v=1710987097"},{"product_id":"amazing-deep-pour-epoxy","title":"Amazing Deep Pour Epoxy","description":"\u003cp\u003eAmazing Deep Pour is a 2-part, extremely clear, deep-cast epoxy. It is ideal for applications requiring thicker pours (up to 2 inches thick) or a glass-like finish.\u003c\/p\u003e\n\u003cp\u003eThis 2:1 mix ratio product was formulated to reduce exotherm (heat build-up), allowing users to pour thicker sections without the delays of layering as with standard epoxies. Amazing Deep Pour is compatible with Alumilite Dyes and Polycolor Resin Powders, Glow Powders, and Glitters. Other colorants may be compatible, testing is required.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shoplightspeed.com\/shops\/606431\/files\/57065714\/amazingdeeppourspecs.png\" alt=\"\" width=\"797\" height=\"407\"\u003e\u003c\/p\u003e\n\u003cp\u003eAmazing Deep Pour is ideal for river tables, resin blanks for lathe turning, filling wide gaps in wood, or any application requiring a depth greater than 3\/8 inch. ADP can also be layered for projects requiring thicknesses beyond 2 inches.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2:1 (2 parts A to 1 part B) by volume\u003c\/li\u003e\n\u003cli\u003eLow exotherm\u003c\/li\u003e\n\u003cli\u003eLow viscosity for easy mixing\u003c\/li\u003e\n\u003cli\u003eLong open time to allow for air bubble release\u003c\/li\u003e\n\u003cli\u003e24-72 hour tack-free time (mass and temperature are factors)\u003c\/li\u003e\n\u003cli\u003e5-7 day full cure\u003c\/li\u003e\n\u003cli\u003eCompliant with FDA 21 CFR 175.300\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e24 oz. Kit = 16 oz. A + 8oz. B\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1.5 gal. Kit = 1 gal. A + .5 gal. B \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3 gal. Kit = 2 gal. A + 1 gal. B\u003c\/strong\u003e\u003c\/p\u003e\n","brand":"Alumilite Corporation","offers":[{"title":"24oz. Kit","offer_id":48015610151227,"sku":"AL10610","price":48.0,"currency_code":"USD","in_stock":true},{"title":"1.5 Gallon Kit","offer_id":48015610118459,"sku":"AL10612","price":207.0,"currency_code":"USD","in_stock":true},{"title":"3 Gallon Kit","offer_id":48015610183995,"sku":"AL10613","price":390.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/Amazing_Deep_Pour_24oz_Kit_-_Hero_copy__09654.1720789954.1280.1280-236887.webp?v=1752692327"},{"product_id":"envirotex-lite","title":"Envirotex Lite","description":"\u003cp\u003eEnviroTex Lite® is a water clear 1:1 mix ration by volume epoxy resin used to coat surfaces. It cures to a long-lasting, high gloss coating in approximately 8 hours at 70°F, and reaches full strength and toughness in about 72 hours. This durable, resilient material requires no polishing to produce a high gloss. One coat is all that is usually required for an attractive finish, however, two or more coats maybe applied one over the other to build additional thickness. Read all instructions prior to use.\u003c\/p\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" href=\"https:\/\/eti-usa.com\/content\/pdfs\/ETI_instructions_envirotexliteenglish_09-13-2020.pdf\" target=\"_blank\"\u003eINSTRUCTIONS\u003c\/a\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe original 1:1 epoxy coating system since 1969\u003c\/li\u003e\n\u003cli\u003eConvenient 1:1 mix ratio by volume\u003c\/li\u003e\n\u003cli\u003e20-30 minute working time \/ 8-12 hour tack-free time\u003c\/li\u003e\n\u003cli\u003eFull cure in 72 hours\u003c\/li\u003e\n\u003cli\u003eFDA Complaint (FDA 21 CFR 175.300) when accurately measured, thoroughly mixed, and fully cured. \u003c\/li\u003e\n\u003cli\u003eSelf-levels to approximately 1\/16\"\u003c\/li\u003e\n\u003cli\u003eProduces a durable high-gloss surface coating for artwork, table tops, crafts, and more! \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWhat's included:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e8 oz. Kit\u003c\/strong\u003e = 4 oz. A + 4oz. B (covers 2 sq. ft.)\u003cbr\u003e\u003cstrong\u003e16 oz. Kit\u003c\/strong\u003e = 8 oz. A + 8oz. B (covers 4 sq. ft.)\u003cbr\u003e\u003cstrong\u003e32 oz. Kit\u003c\/strong\u003e = 16oz. A + 16oz. B (covers 8 sq. ft.)\u003cbr\u003e\u003cstrong\u003e64 oz. Kit\u003c\/strong\u003e = 32oz. A + 32oz. B (covers16 sq. ft.)\u003cbr\u003e\u003cstrong\u003e1 gal. Kit\u003c\/strong\u003e = .5 gal. A + .5 gal. B (covers 32 sq. ft.)\u003c\/p\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" href=\"https:\/\/eti-usa.com\/content\/pdfs\/Envirotex_Lite_Resin_Hardener_Combined.pdf\" target=\"_blank\"\u003eSDS\u003c\/a\u003e\u003c\/p\u003e","brand":"ETI","offers":[{"title":"16oz Kit","offer_id":48015621194043,"sku":"622016","price":26.0,"currency_code":"USD","in_stock":true},{"title":"32oz Kit","offer_id":48015621259579,"sku":"02032","price":40.0,"currency_code":"USD","in_stock":true},{"title":"64oz Kit","offer_id":48015621292347,"sku":"02064","price":70.0,"currency_code":"USD","in_stock":true},{"title":"Gallon Kit","offer_id":48015621325115,"sku":"622128","price":114.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/eti-envirotex-lite-family-all-94628.jpg?v=1713977514"},{"product_id":"epoxacast-650-special-order","title":"EpoxAcast™ 650 Special Order","description":"\u003cp\u003e\u003cstrong\u003ePLEASE CALL TO ORDER!\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eEpoxAcast™ 650\u003c\/strong\u003e is a mineral filled general purpose casting epoxy resin that is low cost and versatile. It features a low mixed viscosity for minimal bubble entrapment.\u003c\/p\u003e\r\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shoplightspeed.com\/shops\/606431\/files\/56948466\/epoxacast650range.png\" alt=\"\" width=\"936\" height=\"171\"\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shoplightspeed.com\/shops\/606431\/files\/56948465\/epoxacast650specs.png\" alt=\"\" width=\"489\" height=\"707\"\u003e\u003c\/p\u003e\r\n\u003cp\u003eFeatures\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eEpoxAcast™ 650\u003c\/strong\u003e is used for making hard dies for metal stamping as well as patterns and fixtures. It is also used for electrical encapsulation to extend the life cycles and enhance the performance of potted electronic devices. The high compressive strength of\u003cstrong\u003e EpoxAcast™ 650\u003c\/strong\u003e makes it ideal for making stamping dies for production pressing of metal ornaments.\u003c\/p\u003e\r\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003ePreparation\u003c\/strong\u003e\u003c\/em\u003e – Avoid breathing fumes - use in a well ventilated area at minimum. NIOSH approved respirator is recommended. Wear safety glasses, long sleeves and rubber gloves to minimize skin contact.\u003c\/p\u003e\r\n\u003cp\u003eMaterials should be stored and used in a room temperature environment (73°F\/23°C). Elevated temperatures will reduce Pot Life. \u003cstrong\u003eEpoxAcast™ 650\u003c\/strong\u003e Resin and Hardeners must be properly measured and thoroughly mixed to achieve full, high-strength, solidcure properties.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eBecause no two applications are quite the same, a small test application to determine suitability for your project is recommended if performance of this material is in question.\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eApplying A Release Agent \u003c\/strong\u003e\u003c\/em\u003e– For releasing epoxy from non-porous surfaces such as resin, metal, glass etc., use \u003cstrong\u003eEase Release™ 200 or 205\u003c\/strong\u003e (available from Smooth-On) to prevent adhesion.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eIMPORTANT: \u003c\/strong\u003eTo ensure thorough coverage, lightly brush the release agent with a soft brush over all surfaces of the mold or model. Follow with a light mist coating and let the release agent dry for 30 minutes.\u003c\/p\u003e\r\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003ePre-mixing Part A\u003c\/strong\u003e\u003c\/em\u003e – The fillers in this epoxy system will settle in the container over time. Before using, fillers need to be reconstituted by pre-mixing Part A thoroughly. The best method is to use a “turbine” mixer (available from Smooth-On) or similar drill mixer attached to a power drill and drill mix on medium speed for 2 minutes. Follow with hand mixing using a flat edge paddle for 1 minute until fillers are uniformly dispersed.\u003c\/p\u003e\r\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eMeasuring \/ Dispensing\u003c\/strong\u003e\u003c\/em\u003e – The proper mixing ratio is 100 parts of \u003cstrong\u003eEpoxAcast™ 650 \u003c\/strong\u003eresin to (12\/13\/14) parts hardener by weight whether using 101, 102 or 103 Hardener. \u003cstrong\u003eYou must use an accurate scale (gram scale or triple beam balance scale) to weigh these components properly. Do not attempt to measure components by volume.\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eMixing tools and containers should be clean and dry. Mixing should be done in a well ventilated area. Wear safety glasses, long sleeves and rubber gloves to minimize contamination risk. Combine \u003cstrong\u003eEpoxAcast™ 650\u003c\/strong\u003e resin with the appropriate amount of hardener. Mix thoroughly for 3 minutes making sure that you scrape the bottom and sides of the container several times.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eAdding Color\u003c\/em\u003e \u003c\/strong\u003e- \u003cstrong\u003eEpoxAcast™ 650\u003c\/strong\u003e can be colored with \u003cstrong\u003eUVO™\u003c\/strong\u003e or \u003cstrong\u003eIGNITE™\u003c\/strong\u003e colorants. Pre-mix colorant with Part A thoroughly and then add Part B.\u003c\/p\u003e\r\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eMixing\u003c\/strong\u003e\u003c\/em\u003e – Be sure mixing utensils are clean and free of any potential contaminants such as dirt, dust or grease. Mix Parts A and B thoroughly for at least 3 minutes with a square edged mixing stick. Be aggressive and scrape sides and bottom of mixing container several times. Use the square edge of mixing stick to bring material off of the sides of container and blend. \u003cstrong\u003eIf using a drill mixer,\u003c\/strong\u003e follow with hand mixing as directed above to ensure thorough mixing.\u003c\/p\u003e\r\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eAdding Fillers \u003c\/strong\u003e\u003c\/em\u003e- A variety of dry fillers can be added. Pre-mix dry filler with Part A before adding Part B.\u003c\/p\u003e\r\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eLowering Viscosity - \u003c\/strong\u003e\u003c\/em\u003e\u003cstrong\u003eEpic™ Epoxy Thinner\u003c\/strong\u003e is a clear, water-like liquid that will lower the viscosity of some Smooth-On casting and laminating epoxies. \u003cstrong\u003eEpic™ \u003c\/strong\u003eis not a solvent and can be added in different proportions to improve flow-ability to make it easier to mix and pour or laminate. \u003cstrong\u003eEpic™\u003c\/strong\u003e will also aid in reducing bubble entrapment.\u003c\/p\u003e\r\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eIncreasing Flexibility - \u003c\/strong\u003e\u003c\/em\u003e\u003cstrong\u003eFlexer™ Epoxy Flexibilizer\u003c\/strong\u003e is a clear, low viscosity liquid additive that will lower the durometer (Shore hardness) of some Smooth-On casting and laminating epoxies. When added to the epoxy system in the proper proportion, the cured epoxy will be softer and, in some cases, can be made semi-rigid. See the \u003cstrong\u003eFlexer™\u003c\/strong\u003e Technical Bulletin for more information.\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/msds\/files\/EpoxAcast_650.pdf\" target=\"_blank\" rel=\"noopener\"\u003e650 Part A SDS\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/msds\/files\/101_Hardener.pdf\" target=\"_blank\" rel=\"noopener\"\u003e101 Part B SDS\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/msds\/files\/EpoxAmite_102_Hardener.pdf\" target=\"_blank\" rel=\"noopener\"\u003e102 Part B SDS\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/msds\/files\/EpoxAmite_103_Hardener.pdf\" target=\"_blank\" rel=\"noopener\"\u003e103 Part B SDS\u003c\/a\u003e\u003c\/p\u003e","brand":"Smooth-On","offers":[{"title":"101 Fast Trial Kit (4 lbs. \/ 1.81 kg.)","offer_id":48015621554491,"sku":"03540A\/03040B","price":46.99,"currency_code":"USD","in_stock":false},{"title":"101 Fast Gallon Kit (14 lbs. \/ 6.35 kg.)","offer_id":48015621521723,"sku":"03560A\/03060B","price":140.99,"currency_code":"USD","in_stock":false},{"title":"102 Medium Trial Kit (4 lbs. \/ 1.81 kg.)","offer_id":48015621620027,"sku":"03540A\/03140B","price":50.99,"currency_code":"USD","in_stock":false},{"title":"102 Medium Gallon Kit (14 lbs. \/ 6.35 kg.)","offer_id":48015621587259,"sku":"03560A\/03160B","price":146.99,"currency_code":"USD","in_stock":false},{"title":"103 Slow Trial Kit (4 lbs. \/ 1.81 kg.)","offer_id":48015621685563,"sku":"03540A\/03240B","price":48.99,"currency_code":"USD","in_stock":false},{"title":"103 Slow Gallon Kit (14 lbs. \/ 6.35 kg.)","offer_id":48015621652795,"sku":"03560A\/03260B","price":146.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/650supercombo.jpg?v=1713390411"},{"product_id":"epoxacast-655-special-order","title":"EpoxAcast™ 655 Special Order","description":"\u003cp\u003e\u003cstrong\u003ePLEASE CALL US TO ORDER!\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eEpoxAcast\u003c\/strong\u003e™ \u003cstrong\u003e655 \u003c\/strong\u003e(formerly Metalset™ A-30) is a versatile aluminum filled castable epoxy resin that is very hard and strong. It is dimensionally stable, even when mass cast up to 512 in³ \/ 8,390 cm³.\u003c\/p\u003e\r\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shoplightspeed.com\/shops\/606431\/files\/56948572\/epoxacast655range.png\" alt=\"\" width=\"937\" height=\"174\"\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shoplightspeed.com\/shops\/606431\/files\/56948571\/epoxacast655specs.png\" alt=\"\" width=\"497\" height=\"726\"\u003e\u003c\/p\u003e\r\n\u003cp\u003eFeatures\u003c\/p\u003e\r\n\u003cp\u003eCured \u003cstrong\u003eEpoxAcast\u003c\/strong\u003e™ \u003cstrong\u003e655\u003c\/strong\u003e epoxy has high physical properties and is used for a variety of applications including making hard tooling, vacuum forming dies\/molds, injection molds, foundry patterns, jigs and fixtures and metal forming dies. Depending on project requirements, Part A Base can be mixed with \u003cstrong\u003e101 FAST\u003c\/strong\u003e, \u003cstrong\u003e102 MEDIUM\u003c\/strong\u003e, \u003cstrong\u003e103 SLOW \u003c\/strong\u003eor \u003cstrong\u003eHT HIGH TEMP\u003c\/strong\u003e hardeners.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003ePreparation\u003c\/em\u003e \u003c\/strong\u003e– Avoid breathing fumes - use in a well ventilated area at minimum. NIOSH approved respirator is recommended. Wear safety glasses, long sleeves and rubber gloves to minimize skin contact.\u003c\/p\u003e\r\n\u003cp\u003eMaterials should be stored and used in a room temperature environment (73°F\/23°C). Elevated temperatures will reduce pot life. \u003cstrong\u003eEpoxAcast™ 655\u003c\/strong\u003e Resin and Hardener must be properly measured and thoroughly mixed to achieve full, high-strength, solid-cure properties. Mixing containers should have straight sides and a flat bottom. Mixing sticks should be flat and stiff with defined edges for scraping the sides and bottom of your mixing container.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eBecause no two applications are quite the same, a small test application to determine suitability for your project is recommended if performance of this material is in question. \u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eApplying A Release Agent\u003c\/em\u003e –\u003c\/strong\u003e For releasing epoxy from non-porous surfaces such as resin, metal, glass etc., use \u003cstrong\u003eEase Release™ 200 or 205\u003c\/strong\u003e (available from Smooth-On) to prevent adhesion.\u003c\/p\u003e\r\n\u003cp\u003eIMPORTANT: To ensure thorough coverage, lightly brush the release agent with a soft brush over all surfaces of the mold or model. Follow with a light mist coating and let the release agent dry for 30 minutes.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003ePre-mixing Part A \u003c\/em\u003e–\u003c\/strong\u003e The fillers in this epoxy system will settle in the container over time. Before using, fillers need to be reconstituted by pre-mixing Part A thoroughly. The best method is to use a “Turbine” mixer (available from Smooth-On) or similar drill mixer attached to a power drill and drill mix on medium speed for 2 minutes. Follow with hand mixing using a flat edge paddle for 1 minute until fillers are uniformly dispersed. Stir Part B thoroughly before dispensing.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eMeasuring \/ Dispensing \u003c\/em\u003e– \u003c\/strong\u003eAccurate measurement by weight is required for the material to cure properly and develop full physical properties. Dispense proper proportions of Parts A and B into clean plastic, metal or wax-free paper containers. \u003cstrong\u003eYou must use an accurate digital gram scale to weigh Parts A and B properly. Do not use an analog scale or attempt to measure components by volume.\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eAdding Color \u003c\/em\u003e-\u003c\/strong\u003e \u003cstrong\u003eEpoxAcast™ 655\u003c\/strong\u003e can be colored with\u003cstrong\u003e UVO™\u003c\/strong\u003e or \u003cstrong\u003eIGNITE™\u003c\/strong\u003e colorants. Pre-mix colorant with Part A thoroughly and then add Part B.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eAdding Fillers\u003c\/em\u003e -\u003c\/strong\u003e A variety of dry fillers can also be added. Pre-mix dry filler with Part A before adding Part B.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eMixing\u003c\/em\u003e –\u003c\/strong\u003e Be sure mixing utensils are clean and free of any potential contaminants such as dirt, dust or grease. Mix Parts A and B thoroughly for at least 3 minutes with a square edged mixing stick. Be aggressive and scrape sides and bottom of mixing container several times. Use the square edge of mixing stick to bring material off of the sides of container and blend.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eIf using a drill mixer,\u003c\/strong\u003e follow with hand mixing as directed above to ensure thorough mixing.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eVacuuming\u003c\/em\u003e -\u003c\/strong\u003e \u003cstrong\u003eEpoxAcast™ 655\u003c\/strong\u003e is low in viscosity compared to other epoxy casting systems and does not require vacuum degassing. If you choose to vacuum the material, subject mixture to 29 h.i.g. mercury in a vacuum chamber until mixture rises, breaks and falls. Allow for 5 times volume expansion in mixing container.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eLowering Viscosity \u003c\/em\u003e- Epic™ Epoxy Thinner\u003c\/strong\u003e is a clear, water-like liquid that will lower the viscosity of some Smooth-On casting and laminating epoxies. \u003cstrong\u003eEpic™\u003c\/strong\u003e is not a solvent and can be added in different proportions to improve flow-ability to make it easier to mix and pour or laminate. \u003cstrong\u003eEpic™\u003c\/strong\u003e will also aid in reducing bubble entrapment.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eIncreasing Flexibility \u003c\/em\u003e- Flexer™ Epoxy Flexibilizer\u003c\/strong\u003e is a clear, low viscosity liquid additive that will lower the durometer (Shore hardness) of some Smooth-On casting and laminating epoxies. When added to the epoxy system in the proper proportion, the cured epoxy will be softer and, in some cases, can be made semi-rigid. See the \u003cstrong\u003eFlexer™\u003c\/strong\u003e Technical Bulletin for more information.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003ePouring \u003c\/em\u003e–\u003c\/strong\u003e If casting \u003cstrong\u003eEpoxAcast™ 655\u003c\/strong\u003e into a rubber mold, pour mixture in a single spot at the lowest point of the mold. Let the mixture seek its level. A uniform flow will help minimize entrapped air.\u003c\/p\u003e\r\n\u003cp\u003eIf making vacuum forming molds, it is best to use piano wire (15\/1000 inch gauge) to make vacuum holes.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eCure Time \u003c\/em\u003e-\u003c\/strong\u003e Refer to specified \u003cstrong\u003eCure Times\u003c\/strong\u003e in the \u003cstrong\u003eHandling Properties \u003c\/strong\u003esection. Cured material will be hard and unable to penetrate with a finger nail. Cured epoxy can now be dry sanded.\u003cem\u003e\u003cstrong\u003e If machining or sanding, wear NIOSH approved mask to prevent inhalation of particles. \u003c\/strong\u003e\u003c\/em\u003e\u003cstrong\u003ePot Life and Cure Time values are dependent on mass and mold configuration, as epoxies are mass-sensitive.\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eHeat Curing\u003c\/em\u003e -\u003c\/strong\u003e For best results, \u003cstrong\u003eEpoxAcast™ 655\u003c\/strong\u003e should be heat cured in a dedicated industrial oven. Cure at 175° F \/ 80° C for two hours, followed by three hours at 300° F \/ 150° C. Allow material to cool to room temperature.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003ePainting \u003c\/em\u003e–\u003c\/strong\u003e Cured \u003cstrong\u003eEpoxAcast™ 655\u003c\/strong\u003e can be painted or primed and then painted with acrylic enamel paints. Let paint fully dry before putting part into service.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eRemoving Epoxy – Uncured \/ Non-curing epoxy - \u003c\/em\u003e\u003c\/strong\u003eScrape as much material as possible from the surface using a scraper. Clean the residue with \u003cstrong\u003eE-POX-EE KLEENER™\u003c\/strong\u003e (available from Smooth-On), lacquer thinner, acetone or alcohol. Follow safety warnings pertaining to solvents and provide adequate ventilation.\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/msds\/files\/EpoxAcast_655.pdf\" target=\"_blank\" rel=\"noopener\"\u003e655 Part A SDS\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/msds\/files\/101_Hardener.pdf\" target=\"_blank\" rel=\"noopener\"\u003e101 Part B SDS\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/msds\/files\/EpoxAmite_102_Hardener.pdf\" target=\"_blank\" rel=\"noopener\"\u003e102 Part B SDS\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/msds\/files\/EpoxAmite_103_Hardener.pdf\" target=\"_blank\" rel=\"noopener\"\u003e103 Part B SDS\u003c\/a\u003e\u003c\/p\u003e","brand":"Smooth-On","offers":[{"title":"101 Fast Trial Kit (4 lbs. \/ 1.81 kg.)","offer_id":48015621849403,"sku":null,"price":65.99,"currency_code":"USD","in_stock":false},{"title":"101 Fast Gallon Kit (14 lbs. \/ 6.35 kg.)","offer_id":48015621816635,"sku":null,"price":218.99,"currency_code":"USD","in_stock":false},{"title":"102 Medium Trial Kit (4 lbs. \/ 1.81 kg.)","offer_id":48015621914939,"sku":null,"price":69.99,"currency_code":"USD","in_stock":false},{"title":"102 Medium Gallon Kit (14 lbs. \/ 6.35 kg.)","offer_id":48015621882171,"sku":"66E655B","price":224.99,"currency_code":"USD","in_stock":false},{"title":"103 Slow Trial Kit (4 lbs. \/ 1.81 kg.)","offer_id":48015621980475,"sku":null,"price":68.99,"currency_code":"USD","in_stock":false},{"title":"103 Slow Gallon Kit (14 lbs. \/ 6.35 kg.)","offer_id":48015621947707,"sku":null,"price":223.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/655supercombo.jpg?v=1710987200"},{"product_id":"epoxacast-670-ht","title":"EpoxAcast™ 670 HT","description":"\u003cp\u003e\u003cstrong\u003eEpoxAcast™ 670 HT\u003c\/strong\u003e is an easy-to-use epoxy casting compound that offers high heat resistance up to \u003cstrong\u003e350°F\/177°C\u003c\/strong\u003e (post cure required). \u003cstrong\u003eEpoxAcast™ 670 HT\u003c\/strong\u003e is ideal for making vacuum forming and thermoforming molds, creating foundry patterns, forming dies \u0026amp; fixtures, hard rollers, industrial parts and high impact tools. \u003cstrong\u003eEpoxAcast™ 670 HT\u003c\/strong\u003e is also suitable for encapsulation applications or for use as a high temperature epoxy for bonding a variety of surfaces.\u003c\/p\u003e\r\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shoplightspeed.com\/shops\/606431\/files\/56948616\/epoxcast670htspecs.png\" alt=\"\" width=\"449\" height=\"876\"\u003e\u003c\/p\u003e\r\n\u003cp\u003eFeatures\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eEpoxAcast\u003c\/strong\u003e™ \u003cstrong\u003e670 HT\u003c\/strong\u003e features a relatively low viscosity that ensures minimal bubble entrapment. \u003cstrong\u003eEpoxAcast™ 670 HT\u003c\/strong\u003e also offers an extra long working time of 3 hours. Castings cure with negligible shrinkage and are very hard, very strong and heat resistant.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003ePreparation\u003c\/em\u003e–\u003c\/strong\u003e Avoid breathing fumes - use in a well ventilated area at minimum. NIOSH approved respirator is recommended. Wear safety glasses, long sleeves and rubber gloves to minimize skin contact.\u003c\/p\u003e\r\n\u003cp\u003eMaterials should be stored and used in a room temperature environment (73°F\/23°C). Elevated temperatures will reduce pot life. \u003cstrong\u003eEpoxAcast™ 670 HT \u003c\/strong\u003eResin and Hardener must be properly measured and thoroughly mixed to achieve full, highstrength, solid-cure properties. Mixing containers should have straight sides and a flat bottom. Mixing sticks should be flat and stiff with defined edges for scraping the sides and bottom of your mixing container. \u003cstrong\u003eBecause no two applications are quite the same, a small test application to determine suitability for your project is recommended if performance of this material is in question. \u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eApplying a Release Agent \u003c\/em\u003e– \u003c\/strong\u003eFor releasing epoxy from nonporous surfaces such as resin, metal, glass etc., use \u003cstrong\u003eEase Release™ 200 or 205\u003c\/strong\u003e (available from Smooth-On) to prevent adhesion.\u003c\/p\u003e\r\n\u003cp\u003eIMPORTANT: To ensure thorough coverage, lightly brush the release agent with a soft brush over all surfaces of the mold or model. Follow with a light mist coating and let the release agent dry for 30 minutes.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003ePre-mix Part A Thoroughly\u003c\/em\u003e -\u003c\/strong\u003e Separation may have occurred in transit or storage. Pre-mix for 2 minutes prior to dispensing to a uniform consistency using a straight edge paddle (paint stirrer) or turbo mixer (drill attachment).\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eMeasuring \/ Dispensing\u003c\/em\u003e –\u003c\/strong\u003e Stir Part B thoroughly before dispensing. Accurate measurement by weight is required for the material to cure properly and develop full physical properties. Dispense Parts A and B in proper proportions into clean plastic, metal or wax-free paper containers.\u003cstrong\u003e You must use an accurate digital gram scale to weigh Parts A and B properly. Do not use an analog scale or attempt to measure components by volume.\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eAdding Color \u0026amp; Fillers \u003c\/em\u003e-\u003c\/strong\u003e \u003cstrong\u003eEpoxAcast™ 670 HT\u003c\/strong\u003e can be colored with\u003cstrong\u003e UVO™\u003c\/strong\u003e or\u003cstrong\u003e IGNITE™\u003c\/strong\u003e colorants (from Smooth-On). Pre-mix colorant with Part A thoroughly and then add Part B. A variety of dry fillers can also be added. Pre-mix dry filler with Part A before adding Part B.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eMixing \u003c\/em\u003e–\u003c\/strong\u003e Be sure mixing utensils are clean and free of any potential contaminants such as dirt, dust or grease. Mix Parts A and B thoroughly for at least 3 minutes with a square edged mixing stick. Be aggressive and scrape sides and bottom of mixing container several times. Use the square edge of mixing stick to bring material off of the sides of container and blend. \u003cstrong\u003eIf using a drill mixer,\u003c\/strong\u003e follow with hand mixing as directed above to ensure thorough mixing.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eVacuuming\u003c\/em\u003e -\u003c\/strong\u003e \u003cstrong\u003eEpoxAcast™ 670 HT \u003c\/strong\u003eis low in viscosity compared to other epoxy casting systems and does not require vacuum degassing. If you choose to vacuum the material, subject mixture to 29 h.i.g. mercury in a vacuum chamber until mixture rises, breaks and falls. Allow for 5 times volume expansion in mixing container.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eLowering Viscosity \u003c\/em\u003e-\u003c\/strong\u003e \u003cstrong\u003eEpic™ Epoxy Thinner\u003c\/strong\u003e is a clear, water-like liquid that will lower the viscosity of some Smooth-On casting and laminating epoxies. \u003cstrong\u003eEpic™\u003c\/strong\u003e is not a solvent and can be added in different proportions to improve flow-ability to make it easier to mix and pour or laminate. \u003cstrong\u003eEpic™\u003c\/strong\u003e will also aid in reducing bubble entrapment.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003ePouring\u003c\/em\u003e – \u003c\/strong\u003eIf casting \u003cstrong\u003eEpoxAcast™ 670 HT\u003c\/strong\u003e into a rubber mold, pour mixture in a single spot at the lowest point of the mold. Let the mixture seek its own level. A uniform flow will help minimize entrapped air.\u003c\/p\u003e\r\n\u003cp\u003eIf making vacuum forming molds, it is best to use piano wire (15\/1000 inch gauge) to make vacuum holes.\u003c\/p\u003e\r\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eCure Time - \u003c\/strong\u003e\u003c\/em\u003eRefer to specified Cure Times in Handling Properties section. Cured material will be hard and unable to penetrate with a finger nail. Cured epoxy can now be dry sanded. \u003cem\u003e\u003cstrong\u003eIf machining or sanding, wear NIOSH approved mask to prevent inhalation of particles.\u003c\/strong\u003e\u003c\/em\u003e Pot life and cure time values are dependent on mass and mold configuration, as epoxies are mass-sensitive.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eHeat Curing\u003c\/em\u003e -\u003c\/strong\u003e For best results, \u003cstrong\u003eEpoxAcast™ 670 HT \u003c\/strong\u003eshould be heat cured in a dedicated industrial oven. Cure at 175° F \/ 80° C for two hours, followed by three hours at 300° F \/ 150° C. Allow material to cool to room temperature before use.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003ePainting\u003c\/em\u003e –\u003c\/strong\u003e Cured \u003cstrong\u003eEpoxAcast™ 670 HT\u003c\/strong\u003e can be painted or primed and then painted with acrylic enamel paints. Let paint fully dry before putting part into service.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eRemoving Epoxy – Uncured \/ Non-curing epoxy -\u003c\/em\u003e \u003c\/strong\u003eScrape as much material as possible from the surface using a scraper. Clean the residue with \u003cstrong\u003eE-POX-EE KLEENER™\u003c\/strong\u003e available from Smooth-On, lacquer thinner, acetone or alcohol. Follow safety warnings pertaining to solvents and provide adequate ventilation.\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/msds\/files\/EpoxAcast_670_HT.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSDS\u003c\/a\u003e\u003c\/p\u003e","brand":"Smooth-On","offers":[{"title":"Trial Kit (2.9 lbs. \/ 1.32 kg.)","offer_id":48015622242619,"sku":"41844","price":63.99,"currency_code":"USD","in_stock":true},{"title":"Gallon Kit (11.6 lbs. \/ 5.26 kg.)","offer_id":48015622209851,"sku":"41861","price":197.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/EpoxAcast-670-HT-combo-1400x1050.jpg?v=1748722881"},{"product_id":"epoxamite-laminating-system","title":"EpoxAmite™ 100 Laminating System","description":"\u003cp\u003e\u003cimg height=\"656\" width=\"685\" alt=\"\" src=\"https:\/\/cdn.shoplightspeed.com\/shops\/606431\/files\/50274466\/epoxamitechart.png\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" href=\"https:\/\/www.smooth-on.com\/tb\/files\/Epoxamite_TB.PDF\" target=\"_blank\"\u003eTechnical Data \u0026amp; Instructions\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003ePLEASE NOTE 5 GALLON OPTIONS ARE SOLD BY INDIVIDUAL COMPONENT.  PLEASE SELECT THE 100 PART A, THEN GO BACK AND SELECT YOUR DESIRED PART B\u003c\/p\u003e\n\u003cp\u003eEpoxAmite™ 100 Epoxy Laminating System is an easy-to-use liquid epoxy system formulated for a wide variety of fabrication\u003cbr\u003eapplications. EpoxAmite™ 100 Laminating System is unfilled, low in viscosity, odorless and cures at room temperature. Cured epoxy\u003cbr\u003edisplays exceptional physical and performance properties. It can be sanded, shaped, machined, drilled, tapped and painted.\u003c\/p\u003e\n\u003cp\u003eEpoxAmite™ 100 Laminating System can be used with reinforcements such as S-Glass, E-Glass, Kevlar and Carbon fibers for lay-up\u003cbr\u003eapplications or composite parts. EpoxAmite™ 100 Resin can also be mixed with fillers such as fumed silica for gel coat applications.\u003cbr\u003eUrefil™ 3, Urefil™ 7 and other fillers can be added for fairing, filleting or bonding applications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdvantages Include:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eConvenient Mix Ratios\u003c\/li\u003e\n\u003cli\u003eEasy-to-Use\u003c\/li\u003e\n\u003cli\u003eExcellent Moisture Resistance\u003c\/li\u003e\n\u003cli\u003eLow Viscosity\u003c\/li\u003e\n\u003cli\u003eNon-blush Formula\u003c\/li\u003e\n\u003cli\u003eEasy-to-Mix \u0026amp; Apply\u003c\/li\u003e\n\u003cli\u003eExceptional Physical \u0026amp; Performance Properties\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003ePreparation\u003c\/em\u003e –\u003c\/strong\u003e Avoid breathing fumes - use in a well ventilated area at minimum. NIOSH approved respirator is recommended. Wear safety glasses, long sleeves and rubber gloves to minimize skin contact. This material has a high exotherm (generates heat). Do not mix components in glass or foam containers. Mixing containers should have straight sides and a flat bottom. Mixing sticks should be flat and stiff with defined edges for scraping the sides and bottom of your mixing container.\u003c\/p\u003e\n\u003cp\u003eMaterials should be stored and used in a room temperature environment (73°F\/23°C). Elevated temperatures will reduce Pot Life. \u003cstrong\u003eEpoxAmite™ 100\u003c\/strong\u003e Resin and \u003cstrong\u003e101, 102, 103 Hardener\u003c\/strong\u003e must be properly measured and thoroughly mixed to achieve full, high-strength, solid-cure properties. \u003cstrong\u003eBecause no two applications are quite the same, a small test application to determine suitability for your project is recommended if performance of this material is in question.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eApplying A Release Agent \u003c\/em\u003e– \u003c\/strong\u003eFor releasing epoxy from non-porous surfaces such as resin, metal, glass etc., use \u003cstrong\u003eEase Release™ 200 or 205\u003c\/strong\u003e (available from Smooth-On) to prevent adhesion.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eMeasuring \/ Dispensing\u003c\/em\u003e – \u003c\/strong\u003eAccurate ratio measurements by volume or weight are required for the material to cure properly and develop full physical properties. Stir Part A and Part B thoroughly before dispensing. Refer to specified Mix Ratios in Handling Properties for proper measurements. Dispense Parts A and B proper proportions into clean plastic, metal or wax-free paper containers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eAdding Color \u003c\/em\u003e-\u003c\/strong\u003e \u003cstrong\u003eEpoxAmite™ 100\u003c\/strong\u003e Epoxy Laminating System can be colored with \u003cstrong\u003eUVO™\u003c\/strong\u003e or \u003cstrong\u003eIGNITE™\u003c\/strong\u003e colorants. Pre-mix color with Part A thoroughly and then add Part B.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eMixing \u003c\/em\u003e–\u003c\/strong\u003e Be sure mixing utensils are clean and free of any potential contaminants such as dirt, dust or grease. Mix Parts A and B thoroughly for at least 3 minutes with a square edged mixing stick. Be aggressive and scrape sides and bottom of mixing container several times. Use the square edge of mixing stick to bring material off of the sides of container and blend. \u003cstrong\u003eIf using a drill mixer, \u003c\/strong\u003efollow with hand mixing as directed above to ensure thorough mixing. \u003cstrong\u003eNOTE:\u003c\/strong\u003e If mixture is to be used for coating, pour into a roller pan to extend Pot Life.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eAdding Fillers\u003c\/em\u003e -\u003c\/strong\u003e A variety of dry fillers can be added. Pre-mix dry filler with Part A before adding Part B.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eLowering Viscosity\u003c\/em\u003e - Epic™ Epoxy Thinner\u003c\/strong\u003e is a clear, water-like liquid that will lower the viscosity of some Smooth-On casting and laminating epoxies. \u003cstrong\u003eEpic™\u003c\/strong\u003e is not a solvent and can be added in different proportions to improve flow-ability to make it easier to mix and pour or laminate. \u003cstrong\u003eEpic™ \u003c\/strong\u003ewill also aid in reducing bubble entrapment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eIncreasing Flexibility\u003c\/em\u003e -\u003c\/strong\u003e \u003cstrong\u003eFlexer™ Epoxy Flexibilizer \u003c\/strong\u003eis a clear, low viscosity liquid additive that will lower the durometer (Shore hardness) of some Smooth-On casting and laminating epoxies. When added to the epoxy system in the proper proportion, the cured epoxy will be softer and, in some cases, can be made semi-rigid. See the \u003cstrong\u003eFlexer™ \u003c\/strong\u003eTechnical Bulletin for more information.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant -\u003c\/strong\u003e Mixed \u003cstrong\u003eEpoxAmite™ 100\u003c\/strong\u003e Resin with \u003cstrong\u003eEpoxAmite™ 101, 102, 103 Hardener\u003c\/strong\u003e is exothermic, meaning it generates heat. A concentrated mass of mixed epoxy in a confined area such as a mixing container can generate enough heat to melt a plastic cup, burn skin or ignite combustible materials if left to stand for its full Pot Life. Do not use foam or glass mixing containers or pour sections thicker than 1\/8” (0.32 cm). If a batch of mixed epoxy begins to exotherm, move it to an open air environment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eApplying\u003c\/em\u003e – \u003c\/strong\u003eMixed \u003cstrong\u003eEpoxAmite™ 100\u003c\/strong\u003e is initially a low viscosity liquid that can be poured up to 1\/8” (0.32 cm) thickness.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eLaminating - \u003c\/em\u003e\u003c\/strong\u003ecut the bristles of a chip brush 30% for better control. After epoxy is mixed, you must work quickly to apply multiple layers. Brush an initial gel coat of epoxy over surface. Apply reinforcement fabric evenly into gel coat. Using brush, gently use stippling motion to work fabric into epoxy. Ensure fabric ply is saturated. Plastic polyethylene spreaders may also be used.\u003c\/p\u003e\n\u003cp\u003eAlternate additional thin layers of epoxy and fabric using above application method. Add additional epoxy as needed to wet out subsequent layers. Repeat as necessary until desired thickness is attained. After final layer of fabric is applied, use lamination roller to evenly distribute epoxy and reduce air bubbles. Be mindful of your Thin Film Working Time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eCure Time -\u003c\/em\u003e \u003c\/strong\u003eRefer to specified Cure Times in Handling Properties at room temperature depending on mass. Cured material will be hard and unable to penetrate with a finger nail. Cured epoxy can now be dry sanded.\u003cem\u003e\u003cstrong\u003e If machining or sanding, wear NIOSH approved mask to prevent inhalation of particles. \u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eHeat Curing\u003c\/em\u003e - \u003c\/strong\u003eThis product will cure at room temperature and does not require heat. Cure time can be reduced by applying mild heat. The higher the curing temperature is, the higher the resulting Heat Deflection Temperature. With a higher temperature cure, a service temperature of 138°F \/ 59°C can be attained. Allow epoxy to cure for 30 minutes and then cure for 1 hour at 200°F \/ 93°C. Allow casting to cool to room temperature before handling.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003ePainting\u003c\/em\u003e – \u003c\/strong\u003eCured \u003cstrong\u003eEpoxAmite™ 100\u003c\/strong\u003e Laminating System can be painted and \/ or primed and then painted with acrylic enamel paints. Let paint fully dry before putting part into service.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eRemoving Epoxy – Uncured \/ Non-curing epoxy -\u003c\/em\u003e \u003c\/strong\u003eScrape as much material as possible from the surface using a scraper. Clean the residue with \u003cstrong\u003eE-POX-EE KLEENER™\u003c\/strong\u003e available from Smooth-On, lacquer thinner, acetone or alcohol. Follow safety warnings pertaining to solvents and provide adequate ventilation.\u003c\/p\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" href=\"https:\/\/www.smooth-on.com\/msds\/files\/EpoxAmite_101_Comp.pdf\" target=\"_blank\"\u003e101 SDS\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" href=\"https:\/\/www.smooth-on.com\/msds\/files\/EpoxAmite_102_Comp.pdf\" target=\"_blank\"\u003e102 SDS\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" href=\"https:\/\/www.smooth-on.com\/msds\/files\/EpoxAmite_103_Comp.pdf\" target=\"_blank\"\u003e103 SDS\u003c\/a\u003e\u003c\/p\u003e","brand":"Smooth-On","offers":[{"title":"100 Part A 5 Gallon (36 lbs. \/ 16.33 kg.)","offer_id":48015623487803,"sku":"03070A","price":274.99,"currency_code":"USD","in_stock":false},{"title":"101 Fast Trial Kit (2.5 lbs. \/ 1.13 kg.)","offer_id":48015623586107,"sku":"03042","price":45.99,"currency_code":"USD","in_stock":true},{"title":"101 Fast Gallon Kit (10 lbs. \/ 4.54 kg.)","offer_id":48015623520571,"sku":"03061","price":124.99,"currency_code":"USD","in_stock":false},{"title":"101 Fast Part B for 5 Gallon (9 lbs. \/ 4.08 kg.)","offer_id":48015623553339,"sku":"03070B","price":219.99,"currency_code":"USD","in_stock":true},{"title":"102 Medium Trial Kit (2.6 lbs. \/ 1.18 kg.)","offer_id":48015623684411,"sku":"03142","price":46.99,"currency_code":"USD","in_stock":true},{"title":"102 Medium Gallon Kit (10.3 lbs. \/ 4.67 kg.)","offer_id":48015623618875,"sku":"03161","price":127.99,"currency_code":"USD","in_stock":true},{"title":"102 Medium Part B for 5 Gallon (10.5 lbs. \/ 4.76 kg.)","offer_id":48015623651643,"sku":"03170B","price":209.99,"currency_code":"USD","in_stock":true},{"title":"103 Slow Trial Kit (2.57 lbs. \/ 1.17 kg.)","offer_id":48015623782715,"sku":"03242","price":46.99,"currency_code":"USD","in_stock":true},{"title":"103 Slow Gallon Kit (10.27 lbs. \/ 4.66 kg.)","offer_id":48015623717179,"sku":"03261","price":127.99,"currency_code":"USD","in_stock":true},{"title":"103 Slow Part B for 5 Gallon (10.2 lbs. \/ 4.63 kg.)","offer_id":48015623749947,"sku":"03270B","price":199.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/epoxamitesupercombo.jpg?v=1710987221"},{"product_id":"flexer-epoxy-flexibilizer","title":"Flexer™ Epoxy Flexibilizer","description":"\u003cp\u003e\u003cstrong\u003eFlexer™ Epoxy Flexibilizer\u003c\/strong\u003e is a clear, low viscosity liquid additive that will lower the durometer (Shore hardness) of some Smooth-On casting and laminating epoxies. When added to the epoxy system in the proper proportion, the cured epoxy will be softer and, in some cases, can be made semirigid. \u003cstrong\u003eFlexer™\u003c\/strong\u003e will lower the viscosity of the epoxy system, improves wetting capability (for laminating) and filler load capacity.\u003c\/p\u003e\n\u003cp\u003eFeatures\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMake Epoxy Semi-rigid\u003c\/strong\u003e - make pieces that are less brittle with increased impact resistance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChoose Desired Result\u003c\/strong\u003e - Physical and performance properties of cured epoxy system may lower in proportion to the amount of added. Once \u003cstrong\u003eFlexer™\u003c\/strong\u003e has been added your piece will remain flexible.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLower Viscosity\u003c\/strong\u003e - will help with de-airing castable resins and will help laminating epoxies wet out through composite reinforcements (fiberglass cloth, Kevlar, etc.) better.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003ePREPARATION\u003c\/strong\u003e\u003c\/em\u003e\u003cbr\u003eRead and follow directions given on the technical bulletin for the \u003cstrong\u003eEpoxAcast™\u003c\/strong\u003e or \u003cstrong\u003eEpoxAmite™\u003c\/strong\u003e product before adding \u003cstrong\u003eFlexer™\u003c\/strong\u003e.\u003cbr\u003eStore and use all materials at 73°F \/ 23°C. Avoid breathing fumes - use in a well ventilated area at minimum. NIOSH approved respirator is recommended. Wear safety glasses, long sleeves and rubber gloves to minimize skin contact.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eMEASURING AND MIXING\u003c\/strong\u003e\u003c\/em\u003e\u003cbr\u003e\u003cstrong\u003eFlexer™ Epoxy Flexibilizer\u003c\/strong\u003e is added by weight as a percentage of Part A. An accurate gram scale is required. Add Flexibilizer to Part A of the epoxy system and mix thoroughly. Add the appropriate amount of Part B and mix all components thoroughly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eExample:\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eGoal\u003c\/strong\u003e – Soften \u003cstrong\u003eEpoxAcast 650 \u003c\/strong\u003efrom a Shore 90D to a Shore 60D. \u003cstrong\u003eNormal mix ratio\u003c\/strong\u003e: 100A:12B\u003c\/p\u003e\n\u003cp\u003e\u003cimg height=\"80\" width=\"916\" alt=\"\" src=\"https:\/\/cdn.shoplightspeed.com\/shops\/606431\/files\/50277852\/flexerexample.png\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Working time and cure time will be increased in proportion to the amount of Flexibilizer added. Physical and performance properties (including Shore hardness) of cured epoxy system may be lower in proportion to the amount of \u003cstrong\u003eFlexer™\u003c\/strong\u003e added. Do not exceed recommended loading maximum of 20% of epoxy Part A, as the epoxy system may not cure.\u003c\/p\u003e\n\u003cp\u003e\u003cimg height=\"795\" width=\"832\" alt=\"\" src=\"https:\/\/cdn.shoplightspeed.com\/shops\/606431\/files\/50277420\/flexerchart.png\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" href=\"https:\/\/www.smooth-on.com\/msds\/files\/Flexer.pdf\" target=\"_blank\"\u003eSDS\u003c\/a\u003e\u003c\/p\u003e","brand":"Smooth-On","offers":[{"title":"Pint (1 lbs. \/ 0.45 kg.)","offer_id":48015624732987,"sku":"79544","price":15.99,"currency_code":"USD","in_stock":true},{"title":"Gallon (9 lbs. \/ 4.08 kg.)","offer_id":48015624765755,"sku":"79560","price":85.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/flexer-combo-533x400.jpg?v=1713390877"},{"product_id":"epoxamite-ht","title":"EpoxAmite™ HT","description":"\u003cp\u003e\u003cstrong\u003e\u003cimg height=\"782\" width=\"480\" alt=\"\" src=\"https:\/\/cdn.shoplightspeed.com\/shops\/606431\/files\/50279116\/epoxamitehtchart.png\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca rel=\"noopener\" href=\"https:\/\/www.smooth-on.com\/tb\/files\/EPOXAMITE_HT_TB.pdf\" target=\"_blank\"\u003eTechnical Data \u0026amp; Instructions\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEpoxAmite™ HT High Temperature Laminating Epoxy\u003c\/strong\u003e is a water clear, UV resistant laminating epoxy that resists high temperatures up to 300°F \/ 149°C when properly cured. Pot life is 1 hour and cure time is 24 hours at 73°F \/ 23°C (post cure required – see post cure schedule). Ultra-low viscosity ensures uniform wetting out and fast penetration of reinforcement materials during hand lay-up or vacuum infusion processes. Cured resin offers superior physical properties.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEpoxAmite™ HT High Temp Laminating Epoxy\u003c\/strong\u003e can be used with S-Glass, E-Glass, Kevlar and carbon fibers for making composite tooling or parts.  Applications include making high temperature pre-preg parts, bonding fixtures, vacuum form molds and prototype injection molds.\u003cbr\u003eUse as a backup laminating resin for \u003cstrong\u003eEpoxAcoat™ HT high temperature surface coat epoxy\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003ePreparation\u003c\/strong\u003e\u003c\/em\u003e – Avoid breathing fumes - use in a well ventilated area at minimum. NIOSH approved respirator is recommended. Wear safety glasses, long sleeves and rubber gloves to minimize skin contact. This material has a high exotherm (generates heat). Do not mix components in glass or foam containers.\u003cbr\u003eMaterials should be stored and used in a room temperature environment (73°F\/23°C). Elevated temperatures will reduce Pot Life. \u003cstrong\u003eEpoxAmite™ HT\u003c\/strong\u003e must be properly measured and thoroughly mixed to achieve full performance properties. \u003cem\u003e\u003cstrong\u003eBecause no two applications are quite the same, a small test application to determine suitability for your project is recommended if performance of this material is in question.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eApplying a Release Agent\u003c\/strong\u003e \u003c\/em\u003e– For releasing epoxy from non-porous surfaces such as resin, metal, glass etc., use \u003cstrong\u003eEase Release™ 200 or 205\u003c\/strong\u003e (available from Smooth-On) to prevent adhesion.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eMeasuring \/ Dispensing\u003c\/strong\u003e\u003c\/em\u003e – Accurate ratio measurements by weight are required for the material to cure properly and develop full physical properties. Refer to specified Mix Ratios in Handling Properties for proper measurements. Using a gram scale, dispense Parts A and B proper proportions into clean plastic, metal or wax-free paper containers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eAdding Color\u003c\/em\u003e \u003c\/strong\u003e- \u003cstrong\u003eEpoxAmite™ HT\u003c\/strong\u003e can be colored with \u003cstrong\u003eUVO™\u003c\/strong\u003e colorants (from Smooth-On). Pre-mix colorant with Part A thoroughly and then add Part B.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eMixing\u003c\/strong\u003e \u003c\/em\u003e– Be sure mixing utensils are clean and free of any potential contaminants such as dirt, dust or grease. Mix Parts A and B thoroughly for at least 3 minutes with a square edged mixing stick. Be aggressive and scrape sides and bottom of mixing container several times. Use the square edge of mixing stick to bring material off of the sides of container and blend. \u003cstrong\u003eIf using a drill mixer\u003c\/strong\u003e, follow with hand mixing as directed above to ensure thorough mixing. \u003cstrong\u003eNOTE\u003c\/strong\u003e: If mixture is to be used for coating, pour into a roller pan to extend Pot Life.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eAdding Fillers\u003c\/strong\u003e\u003c\/em\u003e - A variety of dry fillers can be added. Pre-mix dry filler with Part A before adding Part B.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant\u003c\/strong\u003e - Mixed \u003cstrong\u003eEpoxAmite™ HT\u003c\/strong\u003e is exothermic, meaning it generates heat. A concentrated mass of mixed epoxy in a confined area such as a mixing container can generate enough heat to melt a plastic cup, burn skin or ignite combustible materials if left to stand for its full Pot Life. Do not use foam or glass mixing containers or pour sections thicker than 1\/2” (1.28 cm). If a batch of mixed epoxy begins to exotherm, move it to an open air environment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eApplying – Pouring -\u003c\/em\u003e\u003c\/strong\u003e Mixed \u003cstrong\u003eEpoxAmite™ HT\u003c\/strong\u003e is initially a low viscosity liquid that can be poured up to 1\/2” (1.28 cm) thickness.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eLaminating - \u003c\/strong\u003e\u003c\/em\u003eAfter epoxy is mixed, you must work quickly to apply multiple layers. Use a foam brush or roller to evenly spread a thin layer of resin over surface. Apply reinforcement fabric evenly into Resin. Ensure fabric ply is saturated. Plastic polyethylene spreaders may also be used.\u003cbr\u003eAlternate additional \u003cem\u003e\u003cstrong\u003ethin\u003c\/strong\u003e\u003c\/em\u003e layers of epoxy and fabric using above application method. Add additional epoxy as needed to wet out subsequent layers. Repeat as necessary until desired thickness is attained. After final layer of fabric is applied, use lamination roller to evenly distribute epoxy and reduce air bubbles. Be mindful of your Thin Film Working Time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eCure Time \u003c\/em\u003e-\u003c\/strong\u003e Cured material will be hard and unable to penetrate with a finger nail. Cured epoxy can now be dry sanded. \u003cem\u003e\u003cstrong\u003eIf machining or sanding, wear NIOSH approved mask to prevent inhalation of particles.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003ePost Curing\u003c\/em\u003e \u003c\/strong\u003e- \u003cstrong\u003eEpoxAmite™ HT High-Temp Laminating Epoxy Post Cure Schedule:\u003c\/strong\u003e​\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAllow epoxy to cure on the pattern at room temperature for a minimum of 24 hours.\u003c\/li\u003e\n\u003cli\u003ePlace tool and pattern in a cold oven. Set temperature to 150°F \/ 65°C and hold for 4 hours. You may attach support stucture and demold tool after this step is completed, but for maximum stability, we recommend full post cure over pattern.\u003c\/li\u003e\n\u003cli\u003eAfter 4 hours, increase temperature to 200°F \/ 93°C and hold for 3 hours.\u003c\/li\u003e\n\u003cli\u003eAfter 3 hours at 200°F \/ 93°C, increase the temperature to 250°F \/ 121°C and hold for 3 hrs.\u003c\/li\u003e\n\u003cli\u003eAfter 3 hours at 250°F \/ 121°C, increase the temperature to 320°F \/ 160°C and hold for 3 hrs.\u003c\/li\u003e\n\u003cli\u003eAfter completion of the cure cycle, turn off the oven and allow the tool to cool to room temperature before removing part for clean-up and service.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis post cure schedule will result in a casting with a heat distortion temperature of 300°F \/ 149°C.\u003cbr\u003e\u003cstrong\u003eNote - Post curing in excess of 220°F (104°C) will cause this material to yellow. To retain clarity, use the following post cure schedule:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAllow epoxy to cure on the pattern at room temperature for a minimum of 24 hours.\u003c\/li\u003e\n\u003cli\u003ePlace tool and pattern in a cold oven. Set temperature to 150°F \/ 65°C and hold for 4 hours. You may attach support stucture and demold tool after this step is completed, but for maximum stability, we recommend full post cure over pattern.\u003c\/li\u003e\n\u003cli\u003eAfter 4 hours, increase temperature to 220°F \/ 121°C and hold for 3 hours.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis post cure schedule will result in a high-clarity casting with a heat distortion temperature of 200°F \/ 93°C.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003ePainting\u003c\/strong\u003e \u003c\/em\u003e– Cured \u003cstrong\u003eEpoxAmite™ HT\u003c\/strong\u003e can be painted and \/ or primed and then painted with acrylic enamel paints. Let paint fully dry before putting part into service.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eRemoving Epoxy – Uncured \/ Non-curing epoxy \u003c\/em\u003e- \u003c\/strong\u003eScrape as much material as possible from the surface using a scraper. Clean the residue with \u003cstrong\u003eE-POX-EE KLEENER™\u003c\/strong\u003e available from Smooth-On, lacquer thinner, acetone or alcohol. Follow safety warnings pertaining to solvents and provide adequate ventilation.\u003c\/p\u003e\n\u003cul class=\"docslist\"\u003e\n\u003cli\u003e\n\u003ch3\u003eTechnical and Related Documents\u003c\/h3\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003ca class=\"primary-trim\" href=\"https:\/\/www.smooth-on.com\/tb\/files\/EPOXAMITE_HT_TB.pdf\" target=\"_blank\"\u003eTechnical Bulletin\u003c\/a\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch3\u003eSafety Data Sheets\u003c\/h3\u003e\n\u003cdiv data-reg=\"US\" data-lang=\"EN\"\u003e\n\u003cdiv\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/msds\/files\/EpoxAmiteHT.pdf\" target=\"_blank\"\u003eEpoxAmite HT SDS \u003cspan class=\"sdslang\"\u003e| English\u003c\/span\u003e\u003c\/a\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Smooth-On","offers":[{"title":"Trial Kit (2.66 lbs. \/ 1.21 kg.)","offer_id":48015625191739,"sku":"100444","price":68.99,"currency_code":"USD","in_stock":false},{"title":"Gallon Kit (9.3 lbs. \/ 4.22 kg.)","offer_id":48015625158971,"sku":"100461","price":188.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/epoxamite-ht-combo-533x400new.jpg?v=1713390722"},{"product_id":"laminating-epoxies","title":"Laminating Epoxies","description":"\u003cp\u003eThese are special order items.  If you do not see something available, please call us to order.\u003c\/p\u003e\n\u003cp\u003ePRO-SET\u003csup\u003e®\u003c\/sup\u003e Laminating Epoxies can be used to create lightweight, high-performance composite structures that can withstand long-term cyclic loading in challenging environments. These epoxies bond well to core materials, wood, metal, and all types of reinforcing fabrics. They offer excellent moisture resistance, toughness, superior heat resistance, and fatigue resistance. PRO-SET Laminating Epoxies develop excellent physical properties at room temperature and can be post-cured for enhanced performance.\u003c\/p\u003e\n\u003cp\u003eLaminating Epoxies can be dyed upon request for a visual quality control (otherwise known as Quality Control Green or QC). The resin will be dyed yellow and the hardener will be dyed blue so, when properly metered and blended, a consistent shade of green is achieved.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eEach Laminating resin and hardener combination has unique physical, mechanical, and thermal properties. See the Technical Data Sheets in the table below for details.\u003c\/em\u003e\u003c\/p\u003e\n\u003cdiv class=\"app__block-entry\"\u003e\n\u003ch3\u003eSTANDARD LAMINATING RESINS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLAM-125 Low Viscosity Laminating Resin\u003c\/li\u003e\n\u003cli\u003eLAM-135 Medium Viscosity Laminating Resin\u003c\/li\u003e\n\u003cli\u003eLAM-145 Thixotropic Laminating Resin\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"app__block-entry\"\u003e\n\u003ch3\u003eSTANDARD LAMINATING HARDENERS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLAM-224 Fast Laminating Hardener\u003c\/li\u003e\n\u003cli\u003eLAM-226 Medium Laminating Hardener\u003c\/li\u003e\n\u003cli\u003eLAM-229 Slow Laminating Hardener\u003c\/li\u003e\n\u003cli\u003eLAM-237 Extra-Slow Laminating Hardener\u003c\/li\u003e\n\u003cli\u003eLAM-239 Extended Open-Time Hardener\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"app__block-entry-info\"\u003e\n\u003ch3\u003eSTANDARD LAMINATING EPOXIES\u003c\/h3\u003e\n\u003ch4\u003eTechnical Data Sheets\u003c\/h4\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"app__block-entry-table\"\u003e\n\u003cdiv class=\"table-data\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSystem\u003c\/th\u003e\n\u003cth\u003eEpoxy Laminating Type\u003c\/th\u003e\n\u003cth\u003eCure Speed\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/gougeon.canto.com\/direct\/document\/h0vpa7upgt5b921n2le3fqsk4h\/UXP1nGmQrGYJI_6RIcli1KSXHCw\/original?content-type=application%2Fpdf\u0026amp;name=LAM-125_LAM-224.pdf\" rel=\"noopener\" target=\"_blank\"\u003eLAM-125 \/ LAM-224\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eLow-Viscosity\u003c\/td\u003e\n\u003ctd\u003eFast\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/gougeon.canto.com\/direct\/document\/sp9t7op06p4t91d68shrc09j09\/zHxD9GnIYu9TdT-EnpKFj0OA3Rg\/original?content-type=application%2Fpdf\u0026amp;name=LAM-125_LAM-226.pdf\" rel=\"noopener\" target=\"_blank\"\u003eLAM-125 \/ LAM-226\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eLow-Viscosity\u003c\/td\u003e\n\u003ctd\u003eMedium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/gougeon.canto.com\/direct\/document\/j6nog2ep6t74p2psf9qd1k4034\/v0QFB830dfFGs43Z_iAPQUgRhHA\/original?content-type=application%2Fpdf\u0026amp;amp;name=LAM-125_LAM-229.pdf\" rel=\"noopener\" target=\"_blank\"\u003eLAM-125 \/ LAM-229\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eLow-Viscosity\u003c\/td\u003e\n\u003ctd\u003eSlow\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/gougeon.canto.com\/direct\/document\/gltlesspup4khb993nqg16hj1o\/ULGljewzvF9exGQ0TEYhz-NruNw\/original?content-type=application%2Fpdf\u0026amp;amp;name=LAM-125_LAM-237.pdf\" rel=\"noopener\" target=\"_blank\"\u003eLAM-125 \/ LAM-237\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eLow-Viscosity\u003c\/td\u003e\n\u003ctd\u003eExtra Slow\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/gougeon.canto.com\/direct\/document\/s6l01bb70d3ih841rsdbvt3k1m\/XrmtoSqgCm_ePaIhmQK_vaDE5Ho\/original?content-type=application%2Fpdf\u0026amp;amp;name=LAM-125_LAM-239.pdf\" rel=\"noopener\" target=\"_blank\"\u003eLAM-125 \/ LAM-239\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eLow-Viscosity\u003c\/td\u003e\n\u003ctd\u003eExtended Open Time\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/gougeon.canto.com\/direct\/document\/q1v9e1htct3v342682kp5aff74\/lw_L4Xai1x5ksb75LsGhk8RKsMc\/original?content-type=application%2Fpdf\u0026amp;amp;name=LAM-135_LAM-224.pdf\" rel=\"noopener\" target=\"_blank\"\u003eLAM-135 \/ LAM-224\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eMedium-Viscosity\u003c\/td\u003e\n\u003ctd\u003eFast\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/gougeon.canto.com\/direct\/document\/5t9sj1ec6d7h74oi4mp8n8bd2c\/mYCcz7BMGwJjeqjQjNBDS67ZmTs\/original?content-type=application%2Fpdf\u0026amp;amp;name=LAM-135_LAM-226.pdf\" rel=\"noopener\" target=\"_blank\"\u003eLAM-135 \/ LAM-226\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eMedium-Viscosity\u003c\/td\u003e\n\u003ctd\u003eMedium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/gougeon.canto.com\/direct\/document\/nusfvjee8t6sb2e3ckhqfap50t\/Ax3lSOCOhdLrujq5BZk2hk_5Xro\/original?content-type=application%2Fpdf\u0026amp;name=LAM-135_LAM-229.pdf\" rel=\"noopener\" target=\"_blank\"\u003eLAM-135 \/ LAM-229\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eMedium-Viscosity\u003c\/td\u003e\n\u003ctd\u003eSlow\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/gougeon.canto.com\/direct\/document\/5ugpdh39v16p725pnrohrrf97d\/IbKtj0jfxgUvcSrk9a9k3qSbSB8\/original?content-type=application%2Fpdf\u0026amp;amp;name=LAM-135_LAM-237.pdf\" rel=\"noopener\" target=\"_blank\"\u003eLAM-135 \/ LAM-237\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eMedium-Viscosity\u003c\/td\u003e\n\u003ctd\u003eExtra Slow\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/gougeon.canto.com\/direct\/document\/otob2ftqoh0lr8vkt2r4iltv02\/43Min_GvEcb6-7fjn3jBNlXXZko\/original?content-type=application%2Fpdf\u0026amp;amp;name=LAM-135_LAM-239.pdf\" rel=\"noopener\" target=\"_blank\"\u003eLAM-135 \/ LAM-239\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eMedium-Viscosity\u003c\/td\u003e\n\u003ctd\u003eExtended Open Time\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/gougeon.canto.com\/direct\/document\/u2gcfs706p1db71kliu4r22475\/JoERVyR9X2px3Ce8KLi1Erial3Q\/original?content-type=application%2Fpdf\u0026amp;amp;name=LAM-145_LAM-224.pdf\" rel=\"noopener\" target=\"_blank\"\u003eLAM-145 \/ LAM-224\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eThixotropic\u003c\/td\u003e\n\u003ctd\u003eFast\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/gougeon.canto.com\/direct\/document\/qnpurk9kj527bbt6n7dkg6cu71\/8_NMavTI82JZSNtqiZexTXr0mkw\/original?content-type=application%2Fpdf\u0026amp;amp;name=LAM-145_LAM-226.pdf\" rel=\"noopener\" target=\"_blank\"\u003eLAM-145 \/ LAM-226\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eThixotropic\u003c\/td\u003e\n\u003ctd\u003eMedium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/gougeon.canto.com\/direct\/document\/9pjspb6rah0orb43mvpeu3ei7s\/Hz75TR2qG7TB7RJNR0ZTS0qDn8c\/original?content-type=application%2Fpdf\u0026amp;amp;name=LAM-145_LAM-229.pdf\" rel=\"noopener\" target=\"_blank\"\u003eLAM-145 \/ LAM-229\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eThixotropic\u003c\/td\u003e\n\u003ctd\u003eSlow\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/gougeon.canto.com\/direct\/document\/50acio46st4sp89slk7u4vur1q\/oKze_nb6P9of7xCnnE_xzrUf6rI\/original?content-type=application%2Fpdf\u0026amp;name=LAM-145_LAM-237.pdf\" rel=\"noopener\" target=\"_blank\"\u003eLAM-145 \/ LAM-237\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eThixotropic\u003c\/td\u003e\n\u003ctd\u003eExtra Slow\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/gougeon.canto.com\/direct\/document\/9t8rngtufd2a3dcnn9np2tu61b\/6qvcWkVSRnJj-vmLdeTpLDYSqgw\/original?content-type=application%2Fpdf\u0026amp;amp;name=LAM-145_LAM-239.pdf\" rel=\"noopener\" target=\"_blank\"\u003eLAM-145 \/ LAM-239\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eThixotropic\u003c\/td\u003e\n\u003ctd\u003eExtended Open Time\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"PRO-SET®","offers":[{"title":"LAM-125 Low Viscosity Laminating Resin Gallon","offer_id":49522399936827,"sku":"LAM-125-1","price":179.0,"currency_code":"USD","in_stock":false},{"title":"LAM-135 Medium Viscosity Laminating Resin Gallon","offer_id":49522399969595,"sku":"LAM-135-1","price":179.0,"currency_code":"USD","in_stock":false},{"title":"LAM-224 Fast Laminating Hardener","offer_id":49522400002363,"sku":"LAM-224-1","price":140.0,"currency_code":"USD","in_stock":false},{"title":"LAM-226 Medium Laminating Hardener","offer_id":49522400035131,"sku":"LAM-226-1","price":120.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/products-image-2_2x-2048x876.png?v=1727299497"},{"product_id":"amazing-epoxy-starter-kit-8oz","title":"Amazing Epoxy Starter Kit 8oz","description":"\u003cdiv class=\"max-height--inner\"\u003e\n\u003cdiv class=\"max-height--inner-content rte product-short-description\"\u003e\n\u003cp data-start=\"0\" data-end=\"69\"\u003e\u003cstrong data-start=\"0\" data-end=\"69\"\u003eAmazing Epoxy Starter Kit: Everything You Need to Start Creating!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-start=\"71\" data-end=\"511\"\u003eUnlock your creative potential with the Amazing Epoxy Starter Kit—perfect for beginners and seasoned crafters alike! This all-in-one kit comes with everything you need to dive into the world of resin art, whether you're making coasters, jewelry, or giving your tabletops a protective, glass-like finish. With crystal-clear results and FDA-compliant epoxy, your creations will look amazing and stay safe for food contact when properly cured.\u003c\/p\u003e\n\u003ch3 data-start=\"513\" data-end=\"541\"\u003eWhat's Inside the Kit:\u003c\/h3\u003e\n\u003cul data-start=\"542\" data-end=\"957\"\u003e\n\u003cli data-start=\"603\" data-end=\"671\"\u003e\n\u003cstrong data-start=\"608\" data-end=\"634\"\u003e4 Vibrant Mica Powders\u003c\/strong\u003e for colorful, eye-catching results\u003c\/li\u003e\n\u003cli data-start=\"672\" data-end=\"735\"\u003e\n\u003cstrong data-start=\"678\" data-end=\"696\"\u003e1 Powder Brush\u003c\/strong\u003e for easy application of mica powders\u003c\/li\u003e\n\u003cli data-start=\"736\" data-end=\"789\"\u003e\n\u003cstrong data-start=\"741\" data-end=\"753\"\u003e2 Gloves\u003c\/strong\u003e to keep your hands clean and safe\u003c\/li\u003e\n\u003cli data-start=\"790\" data-end=\"842\"\u003e\n\u003cstrong data-start=\"795\" data-end=\"812\"\u003e6 Stir Sticks\u003c\/strong\u003e for smooth, thorough mixing\u003c\/li\u003e\n\u003cli data-start=\"843\" data-end=\"898\"\u003e\n\u003cstrong data-start=\"848\" data-end=\"865\"\u003e6 Mixing Cups\u003c\/strong\u003e with measurements for accuracy\u003c\/li\u003e\n\u003cli data-start=\"899\" data-end=\"957\"\u003e\n\u003cspan data-start=\"904\" data-end=\"928\"\u003eI\u003c\/span\u003e\u003cstrong data-start=\"904\" data-end=\"928\"\u003enstruction Pamphlet\u003c\/strong\u003e with step-by-step guidance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"image-with-text--image image-with-text--inner\"\u003e\n\u003cdiv class=\"image-with-text--image-media aspect-ratio aspect-ratio--large\" style=\"--ratio-percent: 100%;\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"image-with-text--content image-with-text--inner\"\u003e\n\u003cdiv class=\"image-with-text--content--inner\"\u003e\n\u003ch3 class=\"h3\"\u003eResin Creations Made \u003cspan class=\"animated-marker\" style=\"--marker-color: #3d71b8;\"\u003eEasy \u003csvg class=\"svg-marker svg-marker--style1\" width=\"201\" height=\"14\" viewbox=\"0 0 201 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" preserveaspectratio=\"none\"\u003e\n\u003c\/svg\u003e\u003c\/span\u003e\n\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"shopify-section-template--24188851945756__image_with_text_EUVKAm\" class=\"shopify-section section-image-with-text\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"small-12 columns\"\u003e\n\u003cdiv class=\"image-with-text column-spacing--medium grid--image-medium image_first text-left section-spacing section-spacing--disable-bottom\" style=\"--color-bg: #ffffff; --color-text: #2c2d2e; --color-text-rgb: 44,45,46; --solid-button-background: #2c2d2e; --solid-button-background-hover: #1b1b1c; --solid-button-label: #ffffff; --bg-body: #ffffff; --color-border: #e2e2e2;\"\u003e\n\u003cdiv class=\"image-with-text--content image-with-text--inner\"\u003e\n\u003cdiv class=\"image-with-text--content--inner\"\u003e\n\u003ch3 class=\"h3\"\u003e\n\u003cspan class=\"animated-marker\" style=\"--marker-color: #3d71b8;\"\u003e\u003csvg class=\"svg-marker svg-marker--style1\" width=\"201\" height=\"14\" viewbox=\"0 0 201 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" preserveaspectratio=\"none\"\u003e\n\u003c\/svg\u003e \u003c\/span\u003e!\u003c\/h3\u003e\n\u003cdiv class=\"rte\"\u003e\n\u003cp\u003eFrom coasters to keychains and beyond, the Amazing Clear Cast Starter Kit makes it easy to create custom resin pieces like this stunning leaf-shaped coaster.\u003c\/p\u003e\n\u003cp\u003eWith everything you need in one kit, you can mix, pour, and design unique creations in no time. Whether you're crafting functional home décor or fun, personalized gifts, the possibilities are endless. Watch the video to see how it’s done and get inspired to start your own resin project!\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"shopify-section-template--24188851945756__image_with_text_PYj37d\" class=\"shopify-section section-image-with-text\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"small-12 columns\"\u003e\n\u003cdiv class=\"image-with-text column-spacing--medium grid--image-medium text_first text-left section-spacing section-spacing--disable-top section-spacing--disable-bottom\" style=\"--color-bg: #ffffff; --color-text: #2c2d2e; --color-text-rgb: 44,45,46; --solid-button-background: #2c2d2e; --solid-button-background-hover: #1b1b1c; --solid-button-label: #ffffff; --bg-body: #ffffff; --color-border: #e2e2e2;\"\u003e\n\u003cdiv class=\"image-with-text--image image-with-text--inner\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"image-with-text--content image-with-text--inner\"\u003e\n\u003cdiv class=\"image-with-text--content--inner\"\u003e\n\u003ch3 class=\"h3\"\u003eQuick DIY: Custom Bottle Cap Resin \u003cspan class=\"animated-marker\" style=\"--marker-color: #3d71b8;\"\u003eCoasters \u003csvg class=\"svg-marker svg-marker--style1\" width=\"201\" height=\"14\" viewbox=\"0 0 201 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" preserveaspectratio=\"none\"\u003e\n\u003c\/svg\u003e\u003c\/span\u003e\n\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3 class=\"h3\"\u003e\u003cspan class=\"animated-marker\" style=\"--marker-color: #3d71b8;\"\u003e\u003csvg class=\"svg-marker svg-marker--style1\" width=\"201\" height=\"14\" viewbox=\"0 0 201 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" preserveaspectratio=\"none\"\u003e\n\u003c\/svg\u003e \u003c\/span\u003e\u003c\/h3\u003e\n\u003cdiv class=\"rte\"\u003e\n\u003cp\u003eCreating a bottle cap resin piece is easy with this kit—just add your own caps!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWatch now and get inspired to create something \u003c\/strong\u003e\u003cem\u003e\u003cstrong\u003eamazing\u003c\/strong\u003e\u003c\/em\u003e\u003cstrong\u003e! \u003c\/strong\u003e👉\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1. Pour \u0026amp; Level\u003c\/strong\u003e – Pour a thin layer of resin, let it self-level, and remove bubbles with a heat gun.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2. Place \u0026amp; Cure\u003c\/strong\u003e – Arrange your bottle caps in the resin and let cure for 4–6 hours.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3. Mix \u0026amp; Pour\u003c\/strong\u003e – Add mica powder to a new resin batch and pour the second layer, fully covering the caps.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4. Cure \u0026amp; Finish\u003c\/strong\u003e – Let cure for 24–48 hours, then demold and sand edges if needed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e5. Add Shine\u003c\/strong\u003e – For extra gloss, apply a topcoat with Amazing Quick Coat.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Alumilite Corporation","offers":[{"title":"Default Title","offer_id":50434922611003,"sku":"AL10588","price":22.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/Amazing_Epoxy_Starter_Kit_-_Hero_3840x3840_copy__14698.1717079056.1280.1280-317851.webp?v=1752617109"},{"product_id":"high-temperature-tooling-epoxies","title":"High-Temperature \u0026 Tooling Epoxies","description":"\u003cp\u003ePRO-SET® High-Temperature Epoxies are a two-part, high-performance system for synthetic composite tooling and part manufacturing. The PRO-SET® Low-Density Fairing Putty is formulated for filling and Fairing Composite structures in manufacturing and repair applications.\u003c\/p\u003e\n\u003cp\u003eThe PRO-SET\u003csup\u003e®\u003c\/sup\u003e High-Temperature Epoxy system includes a Surface Coat Epoxy, Laminating Epoxy, and Infusion Epoxy. These epoxies can be used to surface molds and plugs when combined with PRO-SET low-density fairing paste. Their advanced chemistry makes them easy to use, reducing labor and delivering top-notch results. They blend quickly, spread easily, and exhibit minimal shrinkage. Composite parts can be demolded after 24-48 hours at room temperature, then are ready for a freestanding post-cure. With a proper post-cure, this system boasts a high Tg of up to 300°F (149°C), excellent temperature stability, and superior part cosmetics.\u003c\/p\u003e\n\u003cdiv class=\"app__block-entry\"\u003e\n\u003ch3\u003eHIGH-TEMPERATURE RESINS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHTP-180 High-Temperature Infusion Resin\u003c\/li\u003e\n\u003cli\u003eHTP-182 High-Temperature Laminating Resin\u003c\/li\u003e\n\u003cli\u003eLAM-151-HT High-Temperature Laminating Resin\u003c\/li\u003e\n\u003cli\u003eHTP-187 High-Temperature Surface Coat Resin\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"app__block-entry\"\u003e\n\u003ch3\u003eHIGH-TEMPERATURE HARDENERS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHTP-280 High-Temperature Infusion Hardener\u003c\/li\u003e\n\u003cli\u003eHTP-284 Fast High-Temperature Laminating Hardener\u003c\/li\u003e\n\u003cli\u003eHTP-286 Slow High-Temperature Laminating Hardener\u003c\/li\u003e\n\u003cli\u003eLAM-251-HT High-Temperature Laminating Hardener\u003c\/li\u003e\n\u003cli\u003eHTP-288 High-Temperature Surface Coat Hardener\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"app__block-entry-info\"\u003e\n\u003ch3\u003eHIGH-TEMPERATURE EPOXIES\u003c\/h3\u003e\n\u003ch4\u003eTechnical Data Sheets\u003c\/h4\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"app__block-entry-table\"\u003e\n\u003cdiv class=\"table-data\"\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSystem\u003c\/th\u003e\n\u003cth\u003eEpoxy Laminating Type\u003c\/th\u003e\n\u003cth\u003eCure Speed\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/gougeon.canto.com\/direct\/document\/t2j3egbl8p7gdajmi9c5nfee06\/ExkzGv6L7HuhdkxQodWuvyXFQdg\/original?content-type=application%2Fpdf\u0026amp;amp;name=HTP-180_HTP-280_High-Temperature_Infusion.pdf\" rel=\"noopener\" target=\"_blank\"\u003eHTP-180 \/ HTP-280\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eInfusion\u003c\/td\u003e\n\u003ctd\u003eSlow\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/gougeon.canto.com\/direct\/document\/k1n1auls7l2b9dap1qvirkr66h\/pUvVgAZwQZ7OVD5l71bk3VmpO1k\/original?content-type=application%2Fpdf\u0026amp;amp;name=HTP-182_HTP-284_High-Temperature-Laminating%28Fast%29.pdf\" rel=\"noopener\" target=\"_blank\"\u003eHTP-182 \/ HTP-284\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eLaminating\u003c\/td\u003e\n\u003ctd\u003eFast\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/gougeon.canto.com\/direct\/document\/vgk8eqb7795rd265rmfv7kma6a\/ZcAmGDBqErVhe93ig7jyI5mdJOY\/original?content-type=application%2Fpdf\u0026amp;amp;name=HTP-182_HTP-286_High-Temperature-Laminating%28Slow%29.pdf\" rel=\"noopener\" target=\"_blank\"\u003eHTP-182 \/ HTP-286\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eLaminating\u003c\/td\u003e\n\u003ctd\u003eSlow\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/gougeon.canto.com\/direct\/document\/qev4fcp9lh55p12ahev913er7i\/7zYVYxlaopeSt102qZEr6gdiG9A\/original?content-type=application%2Fpdf\u0026amp;name=LAM-151-HT_LAM-251-HT.pdf\"\u003eLAM-151-HT\/LAM-251-HT\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eLaminating\u003c\/td\u003e\n\u003ctd\u003eSlow\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/gougeon.canto.com\/direct\/document\/i63478scol6j9bdgtvp9517m3a\/Vp3FDVP3f5y3KgrR8e3PaRX2SUc\/original?content-type=application%2Fpdf\u0026amp;amp;name=HTP-187_HTP-288_High-Temperature-Surface-Coat.pdf\" rel=\"noopener\" target=\"_blank\"\u003eHTP-187 \/ HTP-288\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eSurface Coat\u003c\/td\u003e\n\u003ctd\u003eSlow\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"PRO-SET®","offers":[{"title":"HTP-180-2 (4.65 Gallon) \/ HTP-280-2 (1.55 Gallon)","offer_id":50926969389371,"sku":null,"price":1179.98,"currency_code":"USD","in_stock":false},{"title":"HTP-182-2 (4.65 Gallon) \/ HTP-286-2 (1.16 Gallon)","offer_id":50926969422139,"sku":null,"price":1039.98,"currency_code":"USD","in_stock":false},{"title":"LAM-151-HT-2 (4.13 Gallon) \/LAM-251-HT-2 (1.4 Gallon)","offer_id":50926969454907,"sku":null,"price":1364.98,"currency_code":"USD","in_stock":false},{"title":"HTP-187-1 (0.99 Gallon) \/ HTP-288-1 (0.15 Gallon)","offer_id":50926969487675,"sku":null,"price":390.98,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/High-Temp-and-Tooling-Epoxies_jpg.webp?v=1768947894"},{"product_id":"claritypro-tabletop-epoxy","title":"ClarityPro Tabletop Epoxy","description":"\u003cp\u003eA crystal-clear, UV-resistant tabletop epoxy engineered for glass-like pours, flawless clarity, and professional-grade durability—perfect for tables, charcuterie boards, deep finishes, and high-end resin work.\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEasy 2:1 mixing ratio\u003c\/li\u003e\n\u003cli\u003eUltra-high clarity formula for glass-like pours\u003c\/li\u003e\n\u003cli\u003eUV-resistant and non-yellowing—ideal for bright woods \u0026amp; clear finishes\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat’s Included?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1 Gallon Kit:\u003cbr\u003e\u003c\/strong\u003e- (1) Part A – Resin (2\/3 gal)\u003cbr\u003e- (1) Part B – Hardener (1\/3 gal)\u003c\/p\u003e\n\u003cp style=\"box-sizing: inherit; margin-bottom: 12px; margin-top: 12px; color: rgb(102, 102, 102); font-family: 'Instrument Sans', sans-serif; font-size: 15px; font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-weight: 500; letter-spacing: normal; orphans: 2; text-align: start; text-indent: 0px; text-transform: none; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; white-space: normal; background-color: rgb(255, 255, 255); text-decoration-thickness: initial; text-decoration-style: initial; text-decoration-color: initial;\"\u003e\u003cstrong style=\"box-sizing: inherit;\"\u003e3 Gallon Kit:\u003cbr style=\"box-sizing: inherit;\"\u003e\u003c\/strong\u003e- (1) Part A – Resin (2 gal)\u003cbr style=\"box-sizing: inherit;\"\u003e- (1) Part B – Hardener (1 gal)\u003c\/p\u003e\n\u003cp style=\"box-sizing: inherit; margin-bottom: 0px; margin-top: 12px; color: rgb(102, 102, 102); font-family: 'Instrument Sans', sans-serif; font-size: 15px; font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-weight: 500; letter-spacing: normal; orphans: 2; text-align: start; text-indent: 0px; text-transform: none; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; white-space: normal; background-color: rgb(255, 255, 255); text-decoration-thickness: initial; text-decoration-style: initial; text-decoration-color: initial;\"\u003e\u003cstrong style=\"box-sizing: inherit;\"\u003eBoth kits include:\u003cbr style=\"box-sizing: inherit;\"\u003e\u003c\/strong\u003e- Mixing instructions \u0026amp; safety guide\u003c\/p\u003e","brand":"Starbond","offers":[{"title":"Gallon","offer_id":51199124308283,"sku":"000126821015","price":140.0,"currency_code":"USD","in_stock":false},{"title":"3 Gallon","offer_id":51199124341051,"sku":"ClarityPro-3G","price":300.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/C3_clarity_pro_launch_1080x1080a-2.webp?v=1776797123"},{"product_id":"apoxie-paste","title":"Apoxie Paste","description":"\u003cp\u003eApoxie® Paste is an innovative adhesive medium used to permanently fill, bond, seal, customize \u0026amp; fabricate most materials. Batter-like consistency is stir-able, yet thick enough that it tends to stay put; spread thick or thin with a tool or craft stick. Tint with pigments to create a desired color. Smooths and cleans up really well with Aves® Finishing Solution (or you can use water) to a semi-gloss finish. Great for arts \u0026amp; crafts, jewelry, stone setting, taxidermy, casting with flexible molds \u0026amp; more. Apply to foam or other materials for a hard surface coat, to add texture, or embellish. Use as an adhesive for many projects!\u003c\/p\u003e","brand":"Aves","offers":[{"title":"1oz","offer_id":51365369905467,"sku":"AP1","price":12.0,"currency_code":"USD","in_stock":true},{"title":"8oz","offer_id":51365369938235,"sku":"AP8","price":25.0,"currency_code":"USD","in_stock":false},{"title":"28oz","offer_id":51365369971003,"sku":"AP28","price":49.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/apoxie-paste-tubes_1oz.jpg?v=1786816528"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/collections\/laminiatingcollection.png?v=1699741203","url":"https:\/\/maacaffestore.com\/collections\/epoxy-casting-and-laminating-resins.oembed","provider":"The Compleat Sculptor, Inc","version":"1.0","type":"link"}