{"title":"Fake Glass Effects","description":"","products":[{"product_id":"encapso-k","title":"Encapso™ K","description":"\u003cp\u003e\u003cstrong\u003eEncapso™ K\u003c\/strong\u003e is a water clear encapsulation rubber that looks just like water and is ideal for a variety of encapsulation and display applications.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eHow Does Encapso™ K Work?\u003c\/strong\u003e – Two clear liquids (Part A and Part B) are mixed together in equal amounts. The mixture is then poured around artificial flower stems or over an object.\u003cstrong\u003e Encapso™ K\u003c\/strong\u003e cures to a soft rubber over night depending on casting thickness and conditions. When cured, \u003cstrong\u003eEncapso™ K\u003c\/strong\u003e looks just like water and will last a long time.\u003c\/p\u003e\r\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shoplightspeed.com\/shops\/606431\/files\/52054421\/encapsokspecs.png\" alt=\"\" width=\"409\" height=\"567\"\u003e\u003c\/p\u003e\r\n\u003cp\u003eFeatures\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eNon-Hazardous – No dangerous chemicals\u003c\/li\u003e\r\n\u003cli\u003eSoft, Clear Rubber Lasts A Long Time\u003c\/li\u003e\r\n\u003cli\u003eEasy To Use – Mix two liquids in equal amounts and pour\u003c\/li\u003e\r\n\u003cli\u003eUV Resistant\u003c\/li\u003e\r\n\u003cli\u003eCures without generating any dangerous heat or fumes\u003c\/li\u003e\r\n\u003cli\u003eMinimal Bubble Entrapment\u003c\/li\u003e\r\n\u003cli\u003eCures perfectly clear - Looks just like water\u003c\/li\u003e\r\n\u003cli\u003eCured rubber can be removed from object\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eApplications for Encapso™ K \u003c\/strong\u003e\u003c\/em\u003e- This rubber is perfect for encapsulating artificial flower stems for creating lasting floral displays. You can also pour \u003cstrong\u003eEncapso™ K\u003c\/strong\u003e around just about any inanimate object to encapsulate for display. You can also create a variety of display props and novelty items. \u003cstrong\u003eEncapso™ K\u003c\/strong\u003e can be used to create water\/pond effects for small scale model environments. Fully cured \u003cstrong\u003eEncapso™ K\u003c\/strong\u003e can also be crumbled to look like broken glass, diamonds or ice. Add color to \u003cstrong\u003eEncapso™ K \u003c\/strong\u003ewith Silc Pig™ or \u003cstrong\u003eSilc Pig™ Electric\u003c\/strong\u003e liquid color pigments.\u003c\/p\u003e\r\n\u003cp\u003eInstructions\u003c\/p\u003e\r\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003ePREPARATION...\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eSafety\u003c\/strong\u003e\u003c\/em\u003e - Use in a properly ventilated area (“room size” ventilation). Wear safety glasses, long sleeves and rubber gloves to minimize contamination risk. Wear vinyl gloves only. Latex gloves will inhibit the cure of the rubber. \u003cstrong\u003eDo not apply this product to the skin.\u003c\/strong\u003e \u003cstrong\u003eEncapso™ K\u003c\/strong\u003e may not cure over objects containing sulfur. If compatibility is in question, a small scale test is recommended. Store and use material at room temperature (73°F\/23°C). These products have a limited shelf life and should be used as soon as possible. For Encapsulating Artificial Floral Stems - Arrange \/ position bedding objects (stones, glass beads, etc.) and flowers in vase prior to mixing material.\u003c\/p\u003e\r\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eMEASURING \u0026amp; MIXING... \u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\r\n\u003cp\u003eDispense One Part A and One Part B by volume into mixing container (for example, 1 cup A + 1 cup B). Mix thoroughly for at least five minutes, making absolutely sure that you scrape the sides and bottom of your container several times. Material appears cloudy when first mixed, but will clear after a few minutes.\u003c\/p\u003e\r\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003ePOURING, CURING \u0026amp; PERFORMANCE... \u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003ePouring \u003c\/strong\u003e\u003c\/em\u003e- Push back flower stems and pour mixture directly into the vase until desired level is reached. Do not let mixture touch side of vase. If using a deep vase or pouring at a difficult angle, pouring \u003cstrong\u003eEncapso™ K\u003c\/strong\u003e mixture using a funnel may be beneficial. Reposition flowers to a final arrangement and allow material to cure at least 16 hours at room temperature before handling. \u003cstrong\u003eDo Not Move Vase For At Least 16 Hours Until Rubber Has Cured. \u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eCuring\u003c\/strong\u003e\u003c\/em\u003e - Let cure overnight at room temperature (73°F\/23°C). Do not cure rubber where temperature is less than 65°F \/18°C. You can cure the material faster by applying mild heat (150°F\/60°C).\u003c\/p\u003e\r\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eENCAPSULATION, GLASS \u0026amp; ICE EFFECTS... \u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eFor Encapsulating Objects:\u003c\/strong\u003e\u003c\/em\u003e object must be heavy enough not to float in liquid rubber. Place object in bottom of a container. Use a container that will allow object encapsulated in \u003cstrong\u003eEncapso™ K\u003c\/strong\u003e to be easily removed once rubber has cured. Center object in container, mix and pour \u003cstrong\u003eEncapso™ K\u003c\/strong\u003e around object and let cure.\u003c\/p\u003e\r\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eSuspended Encapsulation:\u003c\/strong\u003e\u003c\/em\u003e object must be heavy enough not to float in liquid rubber. Pour a small amount of \u003cstrong\u003eEncapso™ K\u003c\/strong\u003e in the bottom of your container. Allow material to cure. Position the object to be encapsulated on top of this first cured layer of rubber. Mix and pour a new amount of liquid Encapso™ K over the object. Allow second pour to cure for 16 hours at room temperature. \u003cstrong\u003eEncapso™ K\u003c\/strong\u003e will bond to itself leaving the piece fully encased in a block of clear rubber.\u003c\/p\u003e\r\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eMaking Fake Ice, Diamonds or Broken Glass \u003c\/strong\u003e\u003c\/em\u003e- Fully cured \u003cstrong\u003eEncapso™ K\u003c\/strong\u003e can be crumbled to simulate ice, diamonds or broken glass. Simply crumble cured rubber to desired size or effect.\u003c\/p\u003e\r\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eAdding Color To Encapso™ K \u003c\/strong\u003e\u003c\/em\u003e- Add a small amount of \u003cstrong\u003eSilc Pig™\u003c\/strong\u003e or \u003cstrong\u003eSilc Pig™ Electric\u003c\/strong\u003e color pigment to Part A and mix thoroughly. Combine equal amount of Part B. Mix all components and pour.\u003c\/p\u003e\r\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eRemoving Encapso™ K\u003c\/strong\u003e\u003c\/em\u003e - Fully cured Encapso™ K can be removed from flower stems or encapsulated objects. Simply crumble away from encapsulated item. If pouring \u003cstrong\u003eEncapso™ K\u003c\/strong\u003e over a glass object, apply a thin coating of petroleum jelly or \u003cstrong\u003eEase Release™ 200\u003c\/strong\u003e release agent before pouring rubber.\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/msds\/files\/BD_DS_Eco_Equ_EZB_EZS_Psy_MS_OOMOO_Reb_ST_SS_Soma_Sol_Sorta.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSDS\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/tb\/files\/Encapso_K_TB.pdf\" target=\"_blank\" rel=\"noopener\"\u003eTDS\u003c\/a\u003e\u003c\/p\u003e","brand":"Smooth-On","offers":[{"title":"Trial Kit (2.2 lbs. \/ 1 kg.)","offer_id":48015736537403,"sku":"26944","price":39.99,"currency_code":"USD","in_stock":false},{"title":"2 Gallon Kit (16 lbs. \/ 7.26 kg.)","offer_id":48015736570171,"sku":"26961","price":238.99,"currency_code":"USD","in_stock":true},{"title":"10 Gallon Kit (80 lbs. \/ 36.29 kg.)","offer_id":49239959273787,"sku":"26971","price":1003.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/EncapsoK-combo-1400x1050.jpg?v=1748722667"},{"product_id":"rubber-glass","title":"Rubber Glass™","description":"\u003cp\u003e\u003cstrong\u003eRubber Glass™\u003c\/strong\u003e is a platinum-catalyzed silicone rubber product developed specifically for special effects and display applications. Two liquids (1 Part A + 1 Part B) are mixed together and poured into a container.\u003c\/p\u003e\n\u003cdiv class=\"slide-gallery\"\u003e\n\u003cdiv class=\"slider-main slider-main-1\"\u003e\n\u003ca href=\"https:\/\/www.smooth-on.com\/products\/rubber-glass\/#\" class=\"slider-control slider-left slider-1-left\" rel=\"undefined\"\u003e\u003c\/a\u003e\n\u003cdiv style=\"display: inline-block; width: 100%; max-width: 800px;\"\u003e\n\u003cdiv id=\"slider-wistia-mother-1\" class=\"wistia_responsive_padding\" style=\"padding: 56.25% 0 0 0; position: relative;\"\u003e\n\u003cdiv class=\"wistia_responsive_wrapper\" style=\"height: 100%; left: 0; position: absolute; top: 0; width: 100%;\"\u003e\u003ciframe src=\"https:\/\/player.vimeo.com\/video\/839139361?badge=0\u0026amp;autopause=0\u0026amp;title=0\u0026amp;portrait=0\u0026amp;byline=0\u0026amp;player_id=0\u0026amp;app_id=58479\" style=\"position: absolute; top: 0; left: 0; width: 100%; height: 100%;\" frameborder=\"0\" allow=\"autoplay; fullscreen; picture-in-picture\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cimg height=\"133\" width=\"615\" alt=\"\" src=\"https:\/\/cdn.shoplightspeed.com\/shops\/606431\/files\/52055246\/rubberglasscoverage.png\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe mixture cures overnight to a solid water clear rubber that can then be easily broken or “crumbled” into pieces that look exactly like broken glass, ice or diamonds. Vibrant colors are possible by adding \u003cstrong\u003eSilc-Pig™\u003c\/strong\u003e liquid color pigments.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRubber Glass™\u003c\/strong\u003e can be used to create a variety of special effects (i.e. simulated broken glass where human contact is required) and model effects (i.e. simulated ice or water). It can also be used for electronic encapsulation applications.\u003c\/p\u003e\n\u003cp\u003e\u003cimg height=\"636\" width=\"425\" alt=\"\" src=\"https:\/\/cdn.shoplightspeed.com\/shops\/606431\/files\/52055247\/rubberglassspecs.png\"\u003e\u003c\/p\u003e\n\u003cp\u003eInstructions\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eMEASURING \u0026amp; MIXING... \u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eMaterials should be stored and used in a warm environment (73°F\/23°C). This product has a limited shelf life and should be use as soon as possible. Mixing containers and stirring sticks should be made of plastic and must be clean and dry. Wear safety glasses, long sleeves and vinyl gloves to minimize contamination risk.\u003c\/p\u003e\n\u003cp\u003eDispense One Part A and One Part B by weight or volume into mixing container. Mix thoroughly for at least three minutes, making absolutely sure that you scrape the sides and bottom of your container several times.\u003c\/p\u003e\n\u003cp\u003eDo not whip or agitate material as this may cause air bubbles. If completely bubble free castings are required, vacuum degassing material prior to pouring will eliminate all bubbles.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003ePOURING \u0026amp; CURING... \u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003ePouring\u003c\/strong\u003e\u003c\/em\u003e - Pour mixture into a plastic container or mold (ice cube trays or plastic cups made of polyethylene work well). If pouring into or over other surfaces, be aware that cure inhibition is possible (see section -“\u003cstrong\u003eCure Inhibition\u003c\/strong\u003e”). If casting into silicone molds, a release agent (\u003cstrong\u003eEase Release™ 200\u003c\/strong\u003e available from Smooth-On) is required.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eCuring\u003c\/strong\u003e\u003c\/em\u003e - Let cure overnight at room temperature (73°F\/23°C). Do not cure rubber where temperature is less than 65°F \/18°C. You can cure the material faster by applying mild heat (150°F\/60°C).\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eINHIBITION \u0026amp; PERFORMANCE... \u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eCure Inhibition\u003c\/strong\u003e\u003c\/em\u003e - If compatibility between the rubber and the surface that you are pouring rubber over is a concern, a small scale test is recommended. Materials found to cause cure inhibition include sulfur-based modeling clays and latex rubber. If pouring \u003cstrong\u003eRubber Glass™\u003c\/strong\u003e over a model surface that you think might cause inhibition, apply a “barrier coat” of clear acrylic lacquer sprayed directly over all surfaces that will come in contact with the \u003cstrong\u003eRubber Glass™\u003c\/strong\u003e is usually effective.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eAdhesion:\u003c\/strong\u003e\u003c\/em\u003e \u003cstrong\u003eRubber Glass™\u003c\/strong\u003e may stick to some surfaces such as glass. A coating of \u003cstrong\u003eEase Release™ 200\u003c\/strong\u003e will facilitate release from any surface.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eMaterial Performance\u003c\/strong\u003e\u003c\/em\u003e - Once material has fully cured it can be removed from the container or mold. Cured \u003cstrong\u003eRubber Glass™\u003c\/strong\u003e is now ready to be displayed as is or broken\/crumbled for your specific application.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBecause no two applications are quite the same, a small test application to determine suitability for your project is recommended if performance of this material is in question.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" href=\"https:\/\/www.smooth-on.com\/msds\/files\/BD_DS_Eco_Equ_EZB_EZS_Psy_MS_OOMOO_Reb_ST_SS_Soma_Sol_Sorta.pdf\" target=\"_blank\"\u003eSDS\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" href=\"https:\/\/www.smooth-on.com\/tb\/files\/RUBBER_GLASS_TB.pdf\" target=\"_blank\"\u003eTDS\u003c\/a\u003e\u003c\/p\u003e","brand":"Smooth-On","offers":[{"title":"Trial Kit (2 lbs. \/ 0.91 kg.)","offer_id":48015738732859,"sku":"26914","price":34.99,"currency_code":"USD","in_stock":false},{"title":"2 Gallon Kit (16 lbs. \/ 7.26 kg.)","offer_id":48015738765627,"sku":"26921","price":214.99,"currency_code":"USD","in_stock":false},{"title":"10 Gallon Kit Special Order (80 lbs. \/ 36.29 kg.)","offer_id":48015738798395,"sku":"26951","price":946.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/Rubber-Glass-combo-1400x1050.jpg?v=1755216279"},{"product_id":"smash-plastic","title":"SMASH! Plastic™","description":"\u003cp\u003e\u003cstrong\u003eSMASH! Plastic™\u003c\/strong\u003e is a new urethane liquid plastic designed to shatter\/crumble on impact (\"breakaway glass\"). \u003cstrong\u003eSMASH! Plastic™\u003c\/strong\u003e is water clear and, once fully cured, shatters like glass. It can be cast solid in thin sections to make window panes or rotationally cast to form hollow bottles, jars or other glass-like objects to be used as breakable props for movie and stage productions. Maximum recommended thickness is 1\/8\" (0.33 cm.).\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eCAUTION: NOT FOR HOME USE. THIS PRODUCT IS FOR INDUSTRIAL USE ONLY. With adequate local exhaust ventilation, respiratory protection is not normally required when using this product. Where risk assessment shows air-purifying respirators are appropriate, follow OSHA respirator regulations and European Standards EN 141, 143 and 371. Protective clothing (gloves and long sleeves) is required to minimize the risk of dermal sensitization. If breathing is affected or a dermal rash develops, immediately cease using this product and seek medical attention. Read SDS before using.\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003e\u003cimg src=\"https:\/\/cdn.shoplightspeed.com\/shops\/606431\/files\/52055549\/smashspecs.png\" alt=\"\" width=\"407\" height=\"585\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eFeatures\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eRoom temperature cure system that is easy to use - mixed 1A: 1B by volume (1 cup + 1 cup)\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cp\u003e90 minute demold time - can be broken after 6 hours\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eLow viscosity ensures easy mixing and pouring.\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eCured castings are UV RESISTANT.\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eVibrant colors and color effects are achieved by adding pigment dispersions.\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003eInstructions\u003c\/p\u003e\r\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eSelecting A Mold Rubber - \u003c\/strong\u003e\u003c\/em\u003eCasting into a silicone mold made with Smooth-On \u003cstrong\u003eMold Max™\u003c\/strong\u003e Silicone or \u003cstrong\u003eMold Star™ 15, 16 or 30\u003c\/strong\u003e platinum cured silicone (\u003cstrong\u003enot Mold Star™ T Series\u003c\/strong\u003e) is recommended. Do not use other silicone products. If you are unsure about surface compatibility, a trial casting should be made. To prevent cure inhibition, post-cure newly made \u003cstrong\u003eMold Max™\u003c\/strong\u003e silicones for 8 hours at 150°F\/60°C and let cool prior to casting resin.\u003c\/p\u003e\r\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eMeasuring\u003c\/strong\u003e \u003c\/em\u003e- Materials should be stored and used in a warm environment (73°F\/23°C). This product has a limited shelf life and should be used as soon as possible. The proper mixing ratio is 100A:100B by weight or volume.\u003c\/p\u003e\r\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eMixing\u003c\/strong\u003e \u003c\/em\u003e- Dispense equal amounts of Parts A and B into a mixing container and mix thoroughly for 90 seconds, making sure you scrape the sides and bottom of the container several times. If coloring or adding filler, add filler or tint to Part B and pre-mix thoroughly before adding Part A.\u003c\/p\u003e\r\n\u003cp\u003eIf vacuum degassing prior to pouring, subject mixture to 29 h.i.g. mercury in a suitable vacuum chamber for 2 - 3 minutes or until mixture rises, breaks and falls. Allow for 3 to 4 times volume expansion in mixing container. Do not vacuum too long, as this material gels quickly. Apply \u003cstrong\u003eUniversal™ Mold Release \u003c\/strong\u003eto mold surface prior to casting to ensure easy demold of fragile castings.\u003c\/p\u003e\r\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eCuring - Important: \u003c\/strong\u003e\u003c\/em\u003eUse this product with at least room size ventilation or in proximity to a forced outlet air vent and do not inhale\/breath fumes. Fumes, which may be visible with a significant mass concentration, will quickly dissipate with adequate ventilation. Castings with significant mass may be hot to the touch and irritate skin immediately following cure. Let casting cool to room temperature before handling.\u003c\/p\u003e\r\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003ePouring\u003c\/strong\u003e \u003c\/em\u003e- Do not spill on skin. Pour material in the lowest spot of mold cavity and let material rise and seek its level.\u003c\/p\u003e\r\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eRotationally Casting\u003c\/strong\u003e\u003c\/em\u003e - Pour material into mold and rotationally cast for 7 – 10 minutes. Estimating the amount of material you need to build 1\/8” – 0.33 cm thickness on your rotationally cast piece may take some practice \u0026amp; experimentation.\u003c\/p\u003e\r\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eDemold \u003c\/strong\u003e\u003c\/em\u003e- After 90 minutes, plastic is cured enough to be removed from the mold. Plastic is very fragile, so be careful removing your casting from the mold. Applying \u003cstrong\u003eUniversal™ Mold Release\u003c\/strong\u003e to mold surface before casting should aid in removing the casting from your mold. The longer this material cures the more brittle it becomes, reaching full “brittleness” in 24 hours.\u003c\/p\u003e\r\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eCreating a Glossy Surface - \u003c\/strong\u003e\u003c\/em\u003eApplying a fine mist of denatured alcohol using a sprayer (such as the \u003cstrong\u003eKWIKEE™ Sprayer\u003c\/strong\u003e) over the surface of a cast SMASH! Plastic™ piece will cause the surface to become glossy\/shiny and enhance the glass-like appearance of a breakaway prop. Applying denatured alcohol will cause the surface to become temporarily sticky or tacky. Allow denatured alcohol to dry thoroughly until the surface of the casting is no longer tacky before using prop.\u003c\/p\u003e\r\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eTemperature\u003c\/strong\u003e \u003c\/em\u003e- When castings are exposed to temperatures above 80°F\/26°C, they may soften and warp. Store castings at or below room temperature for 24 hours prior to use.\u003c\/p\u003e\r\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eUsage\u003c\/strong\u003e \u003c\/em\u003e- Inanimate Object: Let material cure for \u003cstrong\u003eat least six hours\u003c\/strong\u003e prior to “smashing” against inanimate object (for example, on the floor, a wall, etc.).\u003c\/p\u003e\r\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eUsage\u003c\/strong\u003e \u003c\/em\u003e- On A Person: Before “smashing” a cast piece over someone’s head, make sure that the wall thickness in all directions is not more than 1\/8” – 0.33 cm. Also, let the material cure for \u003cstrong\u003eat least 16 hours\u003c\/strong\u003e at room temperature to become fully “brittle”.\u003c\/p\u003e\r\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eWarning:\u003c\/strong\u003e\u003c\/em\u003e \u003cstrong\u003eSmashing a cast piece that is not fully cured or has a wall thickness greater than 1\/8” – 0.33 cm against a body part may result in serious physical injury\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/msds\/files\/SMASH_Plastic.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSDS\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/tb\/files\/Smash!_Plastic.pdf\" target=\"_blank\" rel=\"noopener\"\u003eTDS\u003c\/a\u003e\u003c\/p\u003e","brand":"Smooth-On","offers":[{"title":"Trial Kit (2 lbs. \/ 0.9 kg.)","offer_id":48015739584827,"sku":"44344","price":64.99,"currency_code":"USD","in_stock":true},{"title":"2 Gallon Kit (16 lbs. \/ 7.26 kg.)","offer_id":48015739617595,"sku":"44361","price":297.99,"currency_code":"USD","in_stock":false},{"title":"10 Gallon Kit (80 lbs. \/ 36.29 kg.)","offer_id":48015739650363,"sku":"44371","price":1216.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/Smash-Plastic-trial-new-1400x1050.jpg?v=1754775799"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/collections\/rubberglasslinehero.png?v=1710255438","url":"https:\/\/maacaffestore.com\/collections\/fake-glass-effects.oembed","provider":"The Compleat Sculptor, Inc","version":"1.0","type":"link"}