{"title":"Epoxy - High Gloss Coatings","description":"","products":[{"product_id":"105-epoxy-resin","title":"105 Epoxy Resin","description":"\u003cp\u003e105 Epoxy Resin is the base material on which all WEST SYSTEM 105 System epoxy compounds are built. It is a clear, pale yellow, low-viscosity liquid epoxy resin. Blended with hardener at the proper ratio, it cures to a hard, solid plastic with superior physical properties. Based on which hardener you choose, it cures at a wide range of temperatures.  Once cured, it forms a high-strength solid that is functionally waterproof, and highly resistant to moisture vapor.\u003c\/p\u003e\n\u003cp\u003eWe designed 105 Epoxy Resin to wet out and bond with wood fiber, fiberglass, and reinforcing fabrics. It also bonds well with a variety of metals.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/www.westsystem.com\/wp-content\/uploads\/West-System-Product-Selection-Chart.jpg\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eEpoxy vs. Esters\u003c\/p\u003e\n\u003cp\u003eWe’ve formulated 105 Epoxy Resin (and its corresponding hardeners) without volatile solvents. Unlike polyester or vinylester resins, our epoxy virtually does not shrink after curing. With a relatively high flash point and no solvent odor, it’s safer to use than styrenated resins.\u003c\/p\u003e\n\u003cp\u003eThickening Epoxy\u003c\/p\u003e\n\u003cp\u003eModifying this epoxy with WEST SYSTEM fillers creates an excellent structural adhesive or fairing compound. You choose the filler that suits your project. Epoxy thickened with adhesive (high-density) fillers makes structural bonds, bridges gaps, and fills voids. Epoxy thickened with fairing (low-density) fillers is easily sanded and shaped after it cures.\u003c\/p\u003e\n\u003cp\u003eCoating\u003c\/p\u003e\n\u003cp\u003eThis epoxy is also a great coating material.  Applied with a roller, it offers excellent thin-film characteristics. It will flow out and self-level without “fisheyeing.” By combining it with blush-free 207 Special Clear Hardener, you can create a natural finish. You’ll just need to add a couple of coats of varnish for UV protection. This is a good alternative that builds mil thickness quickly, saving time and effort. The results are long-lasting.\u003c\/p\u003e\n\u003cp\u003e105 Resin’s viscosity is approximately 1000 centipoise (cp) at 72 F (22C).\u003c\/p\u003e\n\u003cp\u003eMore Facts about WEST SYSTEM Epoxy \u003cstrong\u003eUsing gel coat over WEST SYSTEM 105 Epoxy Resin and Hardener\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt’s a myth that if you plan to gel coat over a repair, you must make the repair with polyester. We’ve used gel coat over epoxy for decades. It’s in our fiberglass boat repair videos and discussed it our magazine, Epoxyworks.\u003c\/p\u003e\n\u003cp\u003eThere are three key factors for success with gel coat over epoxy:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eMix your epoxy resin and hardener at the proper ratio (Mini Pumps make this a snap).\u003c\/li\u003e\n\u003cli\u003eAllow the epoxy to fully cured.\u003c\/li\u003e\n\u003cli\u003eBefore applying gel coat, remove any amine blush from the cured epoxy surface. Amine blush is simply an easily removed wax-like film that can form as a byproduct of the curing process. WEST SYSTEM 105 Resin\/207 Special Clear Hardener does not blush.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eGel coat manufacturers shy away from approving the use of non-air inhibited gel coat over epoxy because they’re concerned amine blush will interfere with the gel coat’s cure. All you need to do to remove the blush is wash the surface with plain water. It’s then ready for you to prep for paint or gel coat.\u003c\/p\u003e\n\u003cp\u003eThis process is even easier if you use Release fabric. This fabric is applied to uncured epoxy, protecting the surface from contamination. As the epoxy cures, any blush will form on the\u003cem\u003e outside\u003c\/em\u003e of the release fabric. Simply remove the release fabric after cure, and it will take the blush with it. The resulting surface is ready for you to prepare it for paint or gel coat.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEpoxy’s penetration into wood\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEpoxy does more than sit on the surface of the wood. Some epoxy will remain on wood surfaces, and some of it will penetrate into the wood. The amount of penetration depends mostly on how the wood fibers are oriented. Face grain will not absorb nearly as much epoxy as end grain. But since WEST SYSTEM Epoxy is very strong and an excellent adhesive, it strengthens the wood and makes it waterproof.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e105 Epoxy Resin batch size and cure speed\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYou need to know that in larger quantities, epoxy cures much faster. This is because epoxy generates heat as it cures and also cures faster at higher temperatures. This snowball effect increases until the epoxy cures—which in very large batches could take only a couple of minutes. Large pots of mixed epoxy can generate enough heat to cause a runaway exothermic reaction. This can include, smoking, melting the mixing cup or even starting a fire. Spreading epoxy thin allows the heat to dissipate and slows its cure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEpoxy casting \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWEST SYSTEM Epoxy has a very low percentage of shrinkage. In fact, the standards used to calculate shrinkage of other resins (polyester and vinyl ester) aren’t used with WEST SYSTEM because it shrinks so little to measure that way.\u003c\/p\u003e\n\u003cp\u003eWhen epoxy is used to fill holes drilled into wood, it will soak into the end grain. This might look like shrinkage, but it’s not.\u003c\/p\u003e\n\u003cp\u003eBack in the late ’70s and early ’80s, Gougeon Brothers Inc. manufactured over 4,000 wind turbine blades and their molds using WEST SYSTEM Epoxy. It was commonplace to see a 70-foot long mold shrink \u003cem\u003e3\/32″ over the entire 70-foot length\u003c\/em\u003e. That represents shrinkage of just .01% on a laminate consisting of fiberglass and WEST SYSTEM Epoxy.\u003c\/p\u003e\n\u003cp\u003eAvoiding exotherm when casting\u003c\/p\u003e\n\u003cp\u003eWhen casting epoxy, heat buildup can become an issue. Excessive heat can make WEST SYSTEM Epoxy can shrink some. Pouring epoxy in great depths creates the potential for the epoxy to get very hot due to the exothermic reaction resin and hardener have. While exotherm is a normal part of the curing process, you must always keep it under control. Do this by using smaller pours when casting, and working in a cool environment.\u003c\/p\u003e\n\u003cp\u003eAny shrinkage that does occur generally happens while the epoxy is still liquid, but when an intense amount of heat is present, epoxy doesn’t stay liquid for very long. As the heat dissipates, the difference in temperature between the top and bottom of the casting can shock the now solid epoxy and it may crack. To avoid this, make deep castings in layers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdding extra hardener (don’t)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhile adding extra catalyst to polyester resins can lead to a faster cure, you should \u003cstrong\u003enever add extra hardener to epoxy resin\u003c\/strong\u003e. Epoxy reaches cure when the resin molecules cross-link with hardener molecules. When there is too much of either resin or hardener, unlinked molecules are left over. This can result in uncured epoxy or compromised cure strength. Always mix epoxy resin and hardener as close as you can to the recommended ratio.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClamping force\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUnlike traditional wood glues, WEST SYSTEM Epoxy is stronger than wood. Because of this, it is beneficial to have some epoxy between the objects you are gluing together whether they are wood, fiberglass, or other materials. As long as the epoxy is contacting the entire surface of both substrates, no clamping pressure is needed.\u003c\/p\u003e\n\u003cp\u003eThe goal clamping is to simply ensure the epoxy \u003cem\u003econtacts the entire surface for the duration of the cure time\u003c\/em\u003e. Moderating clamp force is all you need. If you aren’t using a filler, and apply too much clamping force, this can result in a glue-starved joint. This makes future joint failure much more likely. Glue starved joints are weaker than their counterparts. Avoid glue-starved joints by following the one- or two-step bonding method.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFiller and Epoxy Strength\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhile certain fillers will increase the density of epoxy, this does not correlate to higher physical properties or increased adhesion strength. Epoxy is strongest without filler added to it, but the fillers are necessary to:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncrease the viscosity of the mix\u003c\/li\u003e\n\u003cli\u003eBridge gaps\u003c\/li\u003e\n\u003cli\u003ePrevent the epoxy from soaking too far into the wood\u003c\/li\u003e\n\u003cli\u003ePrevent glue-starved joints\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eEpoxy and Rotted Wood\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRot eats away the cellulose fiber in wood. Cellulose is the structure of the wood. Replacing it is not as simple as brushing on a coat of solvent-thinned epoxy. Solvented epoxy may replace some of the strength, but isn’t a permanent repair—it won’t restore the strength of the wood fibers. To make a permanent repair, replace the entire rotten area with fresh wood and sealed with epoxy. Addressing rot this way will make the repair area stronger than it was before the rot occurred.\u003c\/p\u003e\n\u003cp\u003eWhy remove rot?\u003c\/p\u003e\n\u003cp\u003eRot needs four major components in order to continue growing:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eFood\u003c\/li\u003e\n\u003cli\u003eMoisture\u003c\/li\u003e\n\u003cli\u003eOxygen\u003c\/li\u003e\n\u003cli\u003eWarmth\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eCutting off just one of these components is enough to cause the rot to go dormant. Solvented epoxies are supposed to cut off rot’s food source by encapsulating and contaminating the wood that the rot spores consume. However, the remaining three components: moisture, oxygen, and warmth, can still penetrate wood coated with solvented epoxy.\u003c\/p\u003e\n\u003cp\u003eThis is because solvented epoxy is a poor moisture barrier. Rot spores will remain in the wood, and even when encapsulated in solvented epoxy, they will only go dormant. Un-isolated rot pores will continue devouring the cellulose, causing more rot.\u003c\/p\u003e\n\u003cp\u003eThis is why we recommend removing the rotten wood and replacing it with fresh wood that is sealed with several coats of WEST SYSTEM Epoxy.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.westsystem.com\/wp-content\/uploads\/105-SDS.pdf\" rel=\"noopener\" target=\"_blank\"\u003eSDS\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan id=\"page66R_mcid50\" class=\"markedContent\"\u003e\u003cspan dir=\"ltr\" style=\"left: 299.989px; top: 1104.96px; font-size: 16.6px; font-family: serif; transform: scaleX(1.05122);\" role=\"presentation\"\u003eOver time, 105 Resin will thicken slightly and will therefore require extra care when\u003c\/span\u003e\u003cbr role=\"presentation\"\u003e\u003cspan dir=\"ltr\" style=\"left: 299.989px; top: 1124.96px; font-size: 16.6px; font-family: serif; transform: scaleX(1.03891);\" role=\"presentation\"\u003emixing. Repeated freeze\/thaw cycles during storage may cause crystallization of 105\u003c\/span\u003e\u003cbr role=\"presentation\"\u003e\u003cspan dir=\"ltr\" style=\"left: 299.989px; top: 1144.97px; font-size: 16.6px; font-family: serif; transform: scaleX(1.05128);\" role=\"presentation\"\u003eResin. Warm resin to 125°F and stir to dissolve crystals. Hardener may darken with age,\u003c\/span\u003e\u003cbr role=\"presentation\"\u003e\u003cspan dir=\"ltr\" style=\"left: 299.989px; top: 1164.97px; font-size: 16.6px; font-family: serif; transform: scaleX(1.04419);\" role=\"presentation\"\u003ebut physical properties are not affected by color. Be aware of a possible color shift if very\u003c\/span\u003e\u003cbr role=\"presentation\"\u003e\u003cspan dir=\"ltr\" style=\"left: 299.989px; top: 1184.97px; font-size: 16.6px; font-family: serif; transform: scaleX(1.06285);\" role=\"presentation\"\u003eold and new hardener are used on the same project.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"West System","offers":[{"title":"105A Quart","offer_id":48014329086267,"sku":"105-A","price":70.0,"currency_code":"USD","in_stock":true},{"title":"105B Gallon","offer_id":48014329119035,"sku":"105-B","price":155.0,"currency_code":"USD","in_stock":true},{"title":"105C 5 Gallon","offer_id":48014329184571,"sku":"105-C","price":460.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/105combo.jpg?v=1713649870"},{"product_id":"205-fast-epoxy-hardener","title":"205 Fast Epoxy Hardener","description":"\u003cp\u003e205 Fast Hardener is a medium-viscosity epoxy curing agent. It is useful in a majority of bonding situations, and at lower temperatures. 205 Fast Hardener produces a rapid epoxy cure that develops physical properties quickly at room temperature. Mix it with WEST SYSTEM 105 Resin in a five-part resin to one-part hardener ratio. The resulting cured epoxy is a rigid, high-strength, moisture-resistant solid. The combination of 105 Resin\/205 Fast Hardener has excellent bonding and coating properties.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e205 Fast Hardener is not intended for clear coating.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cbr\u003ePot Life at 72F (22C):\u003c\/strong\u003e 9 to 12 minutes\u003cbr\u003e\u003cstrong\u003eCures to a solid state:\u003c\/strong\u003e 6 to 8 hours\u003cbr\u003e\u003cstrong\u003eCures to maximum strength:\u003c\/strong\u003e 1 to 4 days\u003cbr\u003e\u003cstrong\u003eMinimum recommended temperature:\u003c\/strong\u003e 40°F (4°C)\u003c\/p\u003e\n\u003cp\u003eChoose 205 Fast Hardener for Cold-Weather Bonding\u003c\/p\u003e\n\u003cp\u003eWe’ve formulated 205 Fast Hardener to cure well at temperatures as low as 40°F (4°C). There are several things you can do to ensure a full cure when using epoxy in low temperatures.\u003c\/p\u003e\n\u003cp\u003ePre-Warm the Resin and Hardener\u003c\/p\u003e\n\u003cp\u003eCold temperatures increase an epoxy’s viscosity, making it harder to dispense, mix and apply. Warming resin and hardener reduces their viscosity so they flow easily through their dispensing pumps. To pre-warm, place the resin and hardener containers under a warming lamp or in a warm-water bath. Pre-warmed resins and hardeners will not cling as much to your mixing equipment. They’ll also blend more easily, ensuring thorough mixing. A warmer, lower-viscosity mixture flows smoothly during application and readily penetrates porous surfaces.\u003c\/p\u003e\n\u003cp\u003eDispensing and Mixing Epoxy in Cold Temperatures\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eAlways dispense 105 Resin and 205 Fast Hardener at the proper mixing ratio. Never alter the amount of hardener because this can seriously compromise the epoxy’s ultimate strength. WEST SYSTEM 300 Mini Pumps come ready to dispense the correct ratio of resin and hardener. One full pump-stroke of resin for every one full pump stroke of hardener is all you need to remember.\u003c\/li\u003e\n\u003cli\u003eRemember, cold epoxy resin and hardener are thicker and more difficult to pump. If you can’t pre-warm the resin and hardener, do not force the dispensing pumps up or down. Keep a steady pressure on each pump. Gradually make a full pump stroke downward, then let rise all the way up on its own.  When working with cold epoxy, give the pump head much more time to return to the top of the stroke.\u003c\/li\u003e\n\u003cli\u003eDispense the epoxy into a smaller diameter pot. This will increase the chemical reaction between resin and hardener. This is because a small pot has less surface area, which prevents heat from dissipating too quickly.\u003c\/li\u003e\n\u003cli\u003eStir the resin and hardener thoroughly for at least 2 minutes in a small pot. Scrape the sides and bottom of the pot. Use a mixing stick shaped to reach the pot’s corners. Let the mixed epoxy sit in the pot a little longer before applying.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003ePreparing Surfaces\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eBetween applying coats of epoxy, prepare the cured epoxy surfaces. When coating at cold temperatures, the slower cure can result in a waxy\/greasy film on the surface of the cured epoxy, called amine blush. Remove this byproduct of the curing process before you apply the next coat of epoxy. Amine blush is easy to wash away with plain water and a 3M Scotchbrite pad. Don’t let the water evaporate. Dry the surface with plain white paper towels. Don’t use rags, because they can contaminate the surface with laundry softeners and anti-cling ingredients.\u003c\/li\u003e\n\u003cli\u003eFinally, sand any remaining glossy areas with medium-grit sandpaper.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eAllow the Epoxy Extra Time to Cure\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eAllow the epoxy additional time to cure before you remove clamps or stress the joints. As a general rule, \u003cem\u003edouble the cure time for every 18°F (10°C) drop in temperature\u003c\/em\u003e. Allow even more cure time when for bonding pre-stressed joints, bent laminations, or joints that will undergo high loads.\u003c\/li\u003e\n\u003cli\u003eElevate the temperature of the partially cured epoxy. This can help the resin and hardener complete their cross-linking. It’s a good way to boost the epoxy’s physical properties, even after a week at cold temperatures.\u003c\/li\u003e\n\u003cli\u003eTo prevent thermal shock, elevate the temperature of the epoxied surface \u003cem\u003egradually\u003c\/em\u003e. Although any temperature increase will improve cross-linking, for best results, boost the temperature to 72°F (22°C) or warmer.\u003c\/li\u003e\n\u003cli\u003eFinal cure time depends on the hardener speed and the temperature the epoxy is exposed to. Generally, higher temperatures require shorter cure times. When applying heat to cure epoxy, don’t exceed 140°F (60°C).  Leave clamps in place until the epoxy has cooled.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eRead more about Cold-Temperature Bonding in Epoxy Basics, or at Epoxyworks.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.westsystem.com\/wp-content\/uploads\/205-SDS.pdf\" rel=\"noopener\" target=\"_blank\"\u003eSDS\u003c\/a\u003e\u003c\/p\u003e","brand":"West System","offers":[{"title":"205A 7oz","offer_id":48014369227067,"sku":"205-A","price":46.99,"currency_code":"USD","in_stock":true},{"title":"205B 27.5oz","offer_id":48014369259835,"sku":"205-B","price":94.99,"currency_code":"USD","in_stock":true},{"title":"205C 121oz","offer_id":48014369292603,"sku":"205-C","price":259.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/205combo.jpg?v=1713649899"},{"product_id":"206-slow-epoxy-hardener","title":"206 Slow Epoxy Hardener","description":"\u003cp\u003e206 Slow Hardener is a low-viscosity epoxy curing agent for use when extended working time or a longer cure time is needed. It also provides adequate working time at higher shop temperatures. When combined with 105 Resin in a five-part epoxy resin to one-part hardener ratio, the cured resin\/206 Slow Hardener mixture yields a rigid, high-strength, moisture-resistant solid with excellent bonding and barrier coating properties. 206 Slow Hardener is not intended for clear coating.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePot life at 72°F (22°C): 20 to 25 minutes\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eCure to a solid state: 10 to 15 hours\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eCure to maximum strength: 1 to 4 days\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eMinimum recommended temperature: 60°F (16°C)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNo Need for Excessive Clamping Force\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUnlike traditional wood glues, WEST SYSTEM 105 Resin-based epoxy mixtures including 105 Resin and 206 Slow Hardener are stronger than wood or many other substrates. Because of this, it is beneficial to have some epoxy between the objects you are gluing together. As long as the parts are held in place and epoxy is contacting the entire surface of both substrates, no clamping pressure is needed. With epoxy, the goal clamping is to simply ensure the epoxy contacts the entire surface for the duration of the cure time. Moderating clamp force is all that is required.\u003c\/p\u003e\n\u003cp\u003eIf an epoxy filler is not used and a high clamping force is used, the result can be a glue-starved joint which will make bond failure much more likely. Glue starved joints are weaker than their counterparts. Avoid glue-starved joints by following the one- or two-step bonding method.\u003c\/p\u003e\n\u003cp\u003eRead more about glue-starved joints and other epoxy considerations at Epoxyworks.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.westsystem.com\/wp-content\/uploads\/206-SDS.pdf\" rel=\"noopener\" target=\"_blank\"\u003eSDS\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"West System","offers":[{"title":"206A 7oz","offer_id":48014369521979,"sku":"206-A","price":39.99,"currency_code":"USD","in_stock":true},{"title":"206B 27.5oz","offer_id":48014369554747,"sku":"206-B","price":89.99,"currency_code":"USD","in_stock":true},{"title":"206C 121oz","offer_id":48014369587515,"sku":"206-C","price":249.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/206combo.jpg?v=1713649921"},{"product_id":"207-special-clear-hardener","title":"207 Special Clear Hardener","description":"\u003cp\u003eBlush-free 207 Special Clear Hardener was developed for coating and fiberglass cloth application where an exceptionally clear, moisture-resistant, natural wood finish is desired. Blended with 105 Epoxy Resin, 207 Hardener will not blush or turn cloudy in humid conditions. Thin film applications roll out and tip off smoothly, requiring less sanding in preparation for finish coatings.\u003c\/p\u003e\n\u003cp\u003eProfessional and first-time builders like 207 Special Clear Hardener because it is reliable, easy to use, as does not blush. Three coats or more can be applied in one day without additional surface preparation. Fewer coats are required to fill fiberglass weave and in most cases, the final coating can be sanded the following day. Boats can be built faster. Builders also appreciate the excellent fiberglass wet-out characteristics achieved with 105 Resin\/207 Special Clear Hardener, yet it won’t drain from vertical surfaces like the very slow curing, low-viscosity epoxies.\u003c\/p\u003e\n\u003cp\u003e105\/207 Epoxy has strong physical properties, so it can be used as a structural adhesive for gluing and laminating. It has excellent compatibility with paints and varnishes. An ultraviolet inhibitor in 207 Special Clear Hardener helps provide a beautiful, long-lasting finish when used with quality UV filtering varnish. 105\/207 cures clear and colorless.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMix Ratio: \u003c\/strong\u003e3 parts resin : 1 part hardener\u003cbr\u003e\u003cstrong\u003ePot life at 72°F (22°C):\u003c\/strong\u003e 20 to 26 minutes\u003cbr\u003e\u003cstrong\u003eCure to a solid state:\u003c\/strong\u003e 10 to 15 hours\u003cbr\u003e\u003cstrong\u003eCure to maximum strength:\u003c\/strong\u003e 4 to 7 days\u003cbr\u003e\u003cstrong\u003eMinimum recommended temperature:\u003c\/strong\u003e 60°F (16°C)\u003c\/p\u003e\n\u003cp\u003elear Casting Table Tops with 207 Special Clear Hardener\u003c\/p\u003e\n\u003cp\u003ePouring a thick coating or casting onto a table top, bar or counter top creates a popular effect. 207 Special Clear Hardener is especially well suited to these applications. A ¼” thick coating of 105 Resin and 207 Hardener is deep enough to cast objects such as memorabilia into the epoxy for decorative accents. Here is what you need to know when casting a clear epoxy coat over flat surfaces.\u003c\/p\u003e\n\u003cp\u003ePreparation for Casting 105 Epoxy Resin \/ 207 Special Clear Hardener\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSmall, solid objects like coins, bottle caps, mosaic tiles, pebbles, guitar picks, buttons, seashells, and sea glass, are great choices for casting into a layer of epoxy.\u003c\/li\u003e\n\u003cli\u003ePhotographs or postcards will darken and curl when wetted with the epoxy. To prevent this, first coat them with a craft decoupage glue like Mod Podge™.\u003c\/li\u003e\n\u003cli\u003ePorous materials such as burlap can trap a lot of air bubbles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBefore you get started, dam the perimeter of the surface you plan to coat. Duct tape around the bottom edge of the surface to prevent the epoxy from dripping. For coatings ¼” thick, tack a piece of stock molding with 6 mil plastic under it around the table’s perimeter. Make sure the surface is level and the temperature of the substrate is stable before pouring epoxy.\u003c\/p\u003e\n\u003cp\u003eTo prevent bubbles “outgassing” from the surface this, brush one or two thin coats of epoxy onto the surfaces. Allow this to reach gelation (about 6 hours at room temperature) before pouring epoxy. If you wait more than 18 hours before pouring your deeper layer of epoxy, be sure to sand the seal coating before pouring the epoxy mixture.\u003c\/p\u003e\n\u003cp\u003ePierce a hole in the bottom of a mixing pot. Cover this hole with duct tape. This will be your pouring vessel.\u003c\/p\u003e\n\u003cp\u003ePouring Epoxy\u003c\/p\u003e\n\u003cp\u003eWarming the resin and hardener to about 80°F before dispensing will the epoxy’s viscosity, enhancing 207 Special Clear Hardener’s good flow characteristics. Epoxy resin and hardener cans may be safely warmed in a water bath. To reduce bubbling, seal the surface before pouring the deeper coating.\u003c\/p\u003e\n\u003cp\u003eMix the 105 Resin and 207 Special Clear Hardener thoroughly in the pierced and taped mixing cup. Allow this mixture to stand for about one minute to allow the bubbles time to reach the surface so the epoxy is deaerated.  Peel back the duct tape covering the hole and allow this deaerated epoxy to flow onto the table surface. Pour close to the surface so the epoxy won’t splash and introduce air into the mixture.  Stop the hole with tape when the container is nearly empty so bubbly epoxy isn’t poured onto the surface.\u003c\/p\u003e\n\u003cp\u003eLimit the depth of the pour to ¼”. If a thicker layer is desired, allow the lower layer to set up before adding a new layer. Casting epoxy too thickly in a single pour, or casting more epoxy over a layer that has not set up can cause uncontrolled exotherm. This will ruin your project and could possibly destroy pieces of memorabilia you’ve placed in the casting.\u003c\/p\u003e\n\u003cp\u003eConsider the temperature of your work area when deciding how deep to pour. At warmer ambient temperatures, the epoxy will cure faster and generate more heat. Again, limit the depth of each pour, especially when working in warm conditions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRemoving Bubbles from a casting before cure\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA handheld propane torch or heat gun can be used to break the epoxy’s surface tension and help remove air bubbles. First, give the poured epoxy a couple of minutes to self-level. The bubbles should rise to the surface. Then move the heat source rapidly over the area (at roughly one foot per second) to avoid overheating the epoxy. You don’t want the heat source to make the epoxy gel or smoke.\u003c\/p\u003e\n\u003cp\u003eA Beautiful Finish\u003c\/p\u003e\n\u003cp\u003eAllow the final epoxy pour to cure for 24 hours before sanding the surface. When fully cured, the epoxy will sand to a dust. 105 Epoxy Resin with 207 Special Clear Hardener is compatible with many varnishes and polyurethanes. If your clear coated surface will be exposed to sunlight, add a topcoat of the UV protective varnish or a high-quality 2-part polyurethane.\u003c\/p\u003e\n\u003cp\u003eRead more about pouring 105\/207epoxy on a custom bar top in Epoxyworks.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.westsystem.com\/wp-content\/uploads\/207-SDS.pdf\" rel=\"noopener\" target=\"_blank\"\u003eSDS\u003c\/a\u003e\u003c\/p\u003e","brand":"West System","offers":[{"title":"207SA 10.6oz","offer_id":48014369980731,"sku":"207-SA","price":79.99,"currency_code":"USD","in_stock":false},{"title":"207SB 42.2oz","offer_id":48014370013499,"sku":"207-SB","price":149.99,"currency_code":"USD","in_stock":true},{"title":"207SC 185.6oz","offer_id":48014370046267,"sku":"207-SC","price":409.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/207combo.jpg?v=1713649939"},{"product_id":"eti-ex-88-2-gallon-kit","title":"EX-88 General Purpose Epoxy Coating 2 Gallon Kit","description":"\u003cdiv class=\"max-height--inner\"\u003e\n\u003cdiv class=\"max-height--inner-content rte product-short-description\"\u003e\n\u003cp\u003eAlumilite EX-88 is an extremely clear, tough, high gloss surface coating formulated to produce a deep glass like appearance in a single layer on a sealed surface.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eWaterproof\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eHeat resistant\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAlcohol resistant\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe EX-88 has an open time of 25 minutes if poured immediately after mixing (70F). Warmer temperature will reduce open time, therefore it is recommended to pour immediately to allow for self-leveling of the epoxy and maximum bubble release.\u003c\/p\u003e\n\u003cdiv id=\"ProductAccordion-collapsible_tab_JKgF4i-template--24188852306204__main-product\" class=\"collapsible__content accordion__content rte\"\u003e\n\u003cp\u003e✅ \u003cstrong\u003eWaterproof:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eProvides a durable, moisture-resistant finish.\u003c\/p\u003e\n\u003cp\u003e✅ \u003cstrong\u003eHeat Resistant:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWithstands exposure to heat without compromising integrity.\u003c\/p\u003e\n\u003cp\u003e✅ \u003cstrong\u003eSelf-Leveling Formula:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEnsures a smooth, even surface with minimal effort.\u003c\/p\u003e\n\u003cp\u003e✅ \u003cstrong\u003e25-Minute Open Time:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAllows ample working time for adjustments before curing.\u003c\/p\u003e\n\u003cp\u003e✅ \u003cstrong\u003eBubble Release:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDesigned for maximum bubble release when poured immediately.\u003c\/p\u003e\n\u003cdiv id=\"ProductAccordion-collapsible_tab_NeMdia-template--24188852306204__main-product\" class=\"collapsible__content accordion__content rte\"\u003e\n\u003cp\u003e\u003cstrong\u003eHow long do I have to work with EX-88 before it starts to set?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e⏳ \u003c\/strong\u003eYou have an open time of approximately 25 minutes at 70°F. Warmer temperatures will reduce this time, so it's best to pour immediately after mixing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need to seal my surface before applying EX-88?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e🛠️ \u003c\/strong\u003eYes, sealing the surface beforehand ensures better adhesion, prevents air bubbles, and helps achieve a flawless, glass-like finish.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes EX-88 self-level?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003e🌊 \u003c\/strong\u003eYes! EX-88 naturally self-levels when poured immediately after mixing, allowing for a smooth, even coat.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow can I minimize bubbles when using EX-88?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e🫧\u003cstrong\u003e \u003c\/strong\u003ePour immediately after mixing, as this allows for maximum bubble release. You can also use a torch or heat gun to pop any remaining bubbles on the surface.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e Can I use EX-88 for deep pours?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e⚡\u003c\/strong\u003eEX-88 is best suited for surface coatings rather than deep pours. For thicker applications, a deep-pour epoxy may be a better option.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long does EX-88 take to cure?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e⏲️ \u003c\/strong\u003eCure times vary depending on temperature and humidity, but it typically reaches full cure within 24-72 hours.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow should I store my resin to keep it in the best condition?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e❄️ Store your resin in a cool, dark place away from direct sunlight and high temperatures, ideally between 60°F and 75°F (15°C to 24°C). Keep the container tightly sealed to prevent moisture and air from affecting the formula. Wiping the container tops before sealing can help prevent stuck caps.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat are the best conditions for pouring and displaying resin projects?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e☀️For the best results, pour resin in a well-ventilated, temperature-controlled environment with humidity below 60% to prevent cloudiness and bubbles. Once cured, keep finished projects out of direct sunlight to prevent yellowing or warping. If you need extra UV protection, consider using \u003cstrong\u003eAmazing Clear Cast Plus\u003c\/strong\u003e to help maintain color and clarity.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/eti-usa.com\/content\/pdfs\/EX-88_Resin_Hardener_Combined.pdf\" title=\"SDS\" rel=\"noopener\" target=\"_blank\"\u003eSDS\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/eti-usa.com\/content\/pdfs\/ETI_TDS_EX-88_11-09-2000.pdf\" title=\"TDS\" rel=\"noopener\" target=\"_blank\"\u003eTDS\u003c\/a\u003e\u003c\/p\u003e","brand":"ETI","offers":[{"title":"Default","offer_id":48014564065595,"sku":"62088","price":168.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/EX-88_2_Gal_Kit_copy__49298.1713813643.1280.1280-290516.jpg?v=1752618874"},{"product_id":"tarbender-clear-epoxy","title":"Tarbender™ Clear Epoxy","description":"\u003cp\u003e\u003cstrong\u003eTarbender\u003c\/strong\u003e™ is a clear liquid epoxy that can be poured or brushed over a variety of surfaces to provide a strong, high gloss coating. Parts A and B mix together and flow easily. \u003cstrong\u003eTarbender™\u003c\/strong\u003e epoxy cures at room temperature and offers high impact resistance.  It can be applied over wood, plaster, concrete, foam, fabrics, paper, etc. can be used to encapsulate 2-D or 3-D objects. \u003cstrong\u003eTarbender™\u003c\/strong\u003e is certified “aquarium safe” and used by aquariums to create hyperrealistic coral and other aquarium displays.  It is also used by zoos around the world as a coating for themed elements and displays. \u003c\/p\u003e\n\u003cdiv class=\"slide-gallery\"\u003e\n\u003cdiv class=\"slider-main slider-main-1\"\u003e\n\u003ca href=\"https:\/\/www.smooth-on.com\/products\/tarbender\/#\" class=\"slider-control slider-left slider-1-left\" rel=\"undefined\"\u003e\u003c\/a\u003e\n\u003cdiv style=\"display: inline-block; width: 100%; max-width: 800px;\"\u003e\n\u003cdiv id=\"slider-wistia-mother-1\" class=\"wistia_responsive_padding\" style=\"padding: 56.25% 0 0 0; position: relative;\"\u003e\n\u003cdiv class=\"wistia_responsive_wrapper\" style=\"height: 100%; left: 0; position: absolute; top: 0; width: 100%;\"\u003e\u003ciframe src=\"https:\/\/player.vimeo.com\/video\/847046992?badge=0\u0026amp;autopause=0\u0026amp;title=0\u0026amp;portrait=0\u0026amp;byline=0\u0026amp;player_id=0\u0026amp;app_id=58479\" style=\"position: absolute; top: 0; left: 0; width: 100%; height: 100%;\" frameborder=\"0\" allow=\"autoplay; fullscreen; picture-in-picture\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cimg height=\"407\" width=\"334\" alt=\"\" src=\"https:\/\/cdn.shoplightspeed.com\/shops\/606431\/files\/52816714\/taberbenderspecs.png\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg height=\"137\" width=\"754\" alt=\"\" src=\"https:\/\/cdn.shoplightspeed.com\/shops\/606431\/files\/52816713\/tarbendercoverage.png\"\u003e\u003c\/p\u003e\n\u003cp\u003eFeatures\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUV resistant\u003c\/li\u003e\n\u003cli\u003eOptically clear\u003c\/li\u003e\n\u003cli\u003e2A:1B by volume mix ratio - no scale needed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eInstructions\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eProduct and Work Area Preparation\u003c\/strong\u003e \u003c\/em\u003e– \u003cstrong\u003eTarbender™\u003c\/strong\u003e containers should be stored and used at room temperature (73° F\/23° C). Wear long sleeve garments, disposable gloves and safety glasses. Mixing containers should have straight sides and a flat bottom. Mixing sticks should be flat and stiff with defined edges for scraping the sides and bottom of your mixing container. Have all materials and tools on site before you begin.\u003c\/p\u003e\n\u003cp\u003eMixing containers should be made of plastic, metal or wax coated paper. Due to very high temperature potential (exotherm) of \u003cstrong\u003eTarbender™\u003c\/strong\u003e, do not use glass or foam containers.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eVentilation\u003c\/strong\u003e \u003c\/em\u003e– Use only in a well ventilated area and avoid breathing fumes. Wearing a NIOSH approved respirator is recommended.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eMixing\u003c\/em\u003e \u003c\/strong\u003e– Mix using a flat edge mixing stick for 2 minutes. Scrape the sides and bottom of the mixing container with the edge several times. Pour contents into a new, clean mixing container and mix again for 2 minutes. If using a drill mixer, use a variable speed mixer set to low rpm and mix for 2 minutes. Creating a vortex will introduce air. Follow with hand mixing for 2 minutes. A large mass concentration of epoxy will reduce pot life and may become too hot to handle. If concentrated mass of epoxy begins to get very hot, move outside to open air. To extend working time, reduce mass by pouring mixture into a flat baking pan and pour onto bar top from there.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003ePre-Mixing\u003c\/strong\u003e \u003c\/em\u003e– Stir or shake Part A and Part B thoroughly before dispensing.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eMeasuring\u003c\/strong\u003e \u003c\/em\u003e– Accurately measure 2A:1B by volume into a plastic, metal or wax-free mixing container.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003ePouring Tarbender™ To Coat Flat Surfaces\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eUsage Overview\u003c\/strong\u003e\u003c\/em\u003e – Most bar tops, tabletops and other flat surfaces require 2 – 3 layers of \u003cstrong\u003eTarbender™\u003c\/strong\u003e with a 4-hour cure time in between layers. You can apply as many ¼” (6.4mm) layers as needed.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eEstimating Coverage\u003c\/strong\u003e – \u003cstrong\u003eHow Much Will You Need?\u003c\/strong\u003e\u003c\/em\u003e you can correlate the square inch (cm) area of your surface with the yield of mixed \u003cstrong\u003eTarbender™\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTarbender\u003c\/strong\u003e™\u003cstrong\u003e Coverage Rates\u003c\/strong\u003eAmountPoured at 1\/16”(1.6mm)Poured at 1\/8” (3.2mm)Poured at 1\/4” (6.4mm)1 oz. \/ 28.3 grams25.4 in² \/ 164 cm²12.7 in² \/ 82 cm²6.4 in² \/ 41 cm²Trial Unit (2.83 lbs. \/1.28 kg)8 ft² \/ 0.74 m²4 ft² \/ 0.37 m²2 ft² \/ 0.19 m²Gallon Unit (11.2 lbs. \/5.08 kg)32 ft² \/ 2.97 m²16 ft² \/ 1.48 m²8 ft² \/ 0.74 m²5 Gallon Unit (56.5 lbs. \/ 25.62 kg)160 ft² \/ 15 m²80 ft² \/ 7.5 m²40 ft² \/ 3.75 m²\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eSurface Preparation\u003c\/strong\u003e\u003c\/em\u003e – Surface to be coated with liquid epoxy should be level in all directions. Surface must be free of dust, oils or other contaminants. \u003cstrong\u003eTarbender™\u003c\/strong\u003e should not be used on surfaces coated with oil-based stain, as it will delaminate. Water based stains are compatible.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eSealing Porous Surfaces\u003c\/strong\u003e\u003c\/em\u003e – unfinished wood surfaces, stone, marble, concrete, etc. should be sealed with a thin layer of \u003cstrong\u003eTarbender™\u003c\/strong\u003e. See “\u003cem\u003e\u003cstrong\u003ePouring and Spreading Tarbender™\u003c\/strong\u003e\u003c\/em\u003e” section below.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eDo Not Vacuum\u003c\/em\u003e – Subjecting mixture to vacuum will introduce air.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003ePouring Tarbender™\u003c\/strong\u003e\u003c\/em\u003e - After mixing, pour a thin stream along the entire length of the surface. Do not exceed 1\/16” (1.6 mm) for this layer. Your goal is to obtain an even coating. Let \u003cstrong\u003eTarbender™\u003c\/strong\u003e cure for 4 hours before applying another layer. Note; do not exceed ¼” (6.4 mm) thickness per pour. If greater thicknesses are desired, pour in layers of ¼” (6.4 mm) with 4 hours minimum between layers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFor coating bar tops, a minimum thickness of 1\/8” (3.2 mm) or two layers is recommended.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNon-Porous Surfaces do not require a sealing coat. Mix and pour \u003cstrong\u003eTarbender™ \u003c\/strong\u003eas directed to ¼” (6.4 mm) thickness. Look for bubbles and lightly pass propane torch over surface to dissipate. Let cure for 4 hours.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eDissipating Bubbles from Surface Using a Propane Torch\u003c\/strong\u003e\u003c\/em\u003e - After \u003cstrong\u003eTarbender™\u003c\/strong\u003e is poured, pass a propane torch (available at any hardware or DIY store) back and forth lightly over surface to dissipate bubbles. Be careful when handling the torch and do not get closer to the surface than 3” (7.62 cm). If pouring multiple layers, use a propane torch to dissipate bubbles after pouring each layer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eIf Encapsulating 3-D Objects\u003c\/em\u003e \u003c\/strong\u003e– Apply a 1\/16” (1.6 mm) coating to bar top as directed above. Dissipate bubbles with torch. Let cure for 4 hours. Place objects on top of cured layer. Mix a small amount of \u003cstrong\u003eTarbender™\u003c\/strong\u003e and pour directly over and around objects to break surface tension.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eIf Encapsulating Paper, Cardboard, etc.\u003c\/strong\u003e\u003c\/em\u003e – Laminate paper before encapsulating. You can also seal surface with white glue (such as Elmer’s Glue) mixed 4 parts glue to 1 part water). Allow to dry for 16 hours before encapsulating in \u003cstrong\u003eTarbender™\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eBrushing Tarbender™ Onto Surfaces\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApply In Thin Layers\u003c\/strong\u003e - two thin layers of \u003cstrong\u003eTarbender™\u003c\/strong\u003e are recommended for a smooth, uniform coating. Using chip brush, apply 1st thin layer to surface and let epoxy partially cure until “tacky hard”. Apply 2nd thin layer. Allow both layers to fully cure.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eAdding Color\u003c\/strong\u003e\u003c\/em\u003e – You can add \u003cstrong\u003eUVO™\u003c\/strong\u003e or \u003cstrong\u003eIGNITE™\u003c\/strong\u003e colorants or \u003cstrong\u003eCast Magic™\u003c\/strong\u003e Effects Fillers. Pre-mix color or filler into \u003cstrong\u003eTarbender™\u003c\/strong\u003e Part A thoroughly and then add Part B.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eAdding New to Old\u003c\/strong\u003e \u003c\/em\u003e- If too much time passes (72 hours or more) between applying layers of\u003cstrong\u003e Tarbender™\u003c\/strong\u003e, delaminating may occur if you try to add more. For Best Results; lightly sand cured epoxy surface with 220 grit sand paper and wipe clean with denatured alcohol before mixing and applying new \u003cstrong\u003eTarbender™\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eReleasing Tarbender™ From Surfaces\u003c\/strong\u003e\u003c\/em\u003e – if you do not want \u003cstrong\u003eTarbender™\u003c\/strong\u003e to adhere to a surface, apply two coats of \u003cstrong\u003eSonite\u003c\/strong\u003e\u003cem\u003e\u003cstrong\u003e™\u003c\/strong\u003e\u003c\/em\u003e\u003cstrong\u003e Wax\u003c\/strong\u003e. Allow wax to dry 1 hour and buff before pouring epoxy.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eClean Up\u003c\/strong\u003e\u003c\/em\u003e – 90% Isopropyl Alcohol will remove uncured Tarbender™ from most surfaces. It can also be used to clean the surface of cured \u003cstrong\u003eTarbender™\u003c\/strong\u003e epoxy. Alcohol is flammable. Follow all safety precautions for handling flammable liquids and provide adequate ventilation.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003ePerformance\u003c\/strong\u003e\u003c\/em\u003e – Unpainted \u003cstrong\u003eTarbender™\u003c\/strong\u003e will yellow after being exposed to outdoor UV light or excessive heat above 115°F\/46°C for extended periods. \u003cstrong\u003eTarbender™\u003c\/strong\u003e can be displayed outdoors after priming and painting with an aliphatic urethane clear coat (such as Axalta Imron 3.5 Plus High Gloss Polyurethane Topcoat\u003c\/p\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" href=\"https:\/\/www.smooth-on.com\/msds\/files\/Tarbender.pdf\" target=\"_blank\"\u003eSDS\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" href=\"https:\/\/www.smooth-on.com\/tb\/files\/TARBENDER_TB.pdf\" target=\"_blank\"\u003eTDS\u003c\/a\u003e\u003c\/p\u003e","brand":"Smooth-On","offers":[{"title":"Trial Kit (2.83 lbs. \/ 1.28 kg.)","offer_id":48015764750651,"sku":"19644","price":41.99,"currency_code":"USD","in_stock":false},{"title":"2 Gallon Kit (11.3 lbs. \/ 5.13 kg.)","offer_id":48015764783419,"sku":"19661","price":143.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/tarbendercombo.jpg?v=1748637773"},{"product_id":"xtc-3d-coating","title":"XTC-3D™ Coating","description":"\u003cp\u003e\u003cstrong\u003eXTC-3D™ is a protective coating for smoothing and finishing 3D printed parts.\u003c\/strong\u003e Two liquids are mixed together and brushed onto any 3D print. Coating self-levels and wets out uniformly without leaving brush strokes. Working time is 10 minutes and cure time is about 4 hours (depending on mass and temperature). \u003cstrong\u003eXTC-3D™\u003c\/strong\u003e cures to a hard, impact resistant coating that can be sanded, primed and painted. Adding colors and metal effects is easy.\u003c\/p\u003e\r\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shoplightspeed.com\/shops\/606431\/files\/52866651\/xtcspecs.png\" alt=\"\" width=\"405\" height=\"555\"\u003e\u003c\/p\u003e\r\n\u003cp\u003eFeatures\u003c\/p\u003e\r\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eInexpensive to Use\u003c\/strong\u003e\u003c\/em\u003e – 1 oz covers 100+ square inches (see coverage information below).\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003e90% Time \u0026amp; Labor Savings: XTC-3D™\u003c\/strong\u003e fills in 3D print striations and creates a smooth, high gloss finish. The need to post finish is almost eliminated.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eCoat any 3D Print Surface - XTC-3D™\u003c\/strong\u003e can be applied to both SLA and SLS prints. It works with PLA, ABS, Laywoo, Powder Printed Parts and other rigid media. It also can be used to coat EPS, EPDM and urethane foam as well as wood, plaster, fabric, cardboard and paper.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eXTC-3D™\u003c\/strong\u003e does not contain VOC’s, phthalates or phosphates.\u003c\/p\u003e\r\n\u003cp\u003eInstructions\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003ePreparation – \u003c\/strong\u003eMaterials should be stored and used in a room temperature environment (73°F\/23°C). Elevated temperatures will reduce Pot Life. \u003cstrong\u003eXTC-3D™\u003c\/strong\u003e Part A resin and Part B Hardener must be properly measured and thoroughly mixed to achieve full, high-strength, solid-cure properties. \u003cem\u003e\u003cstrong\u003eBecause no two applications are quite the same, a small test application to determine suitability for your project is recommended if performance of this material is in question. \u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\r\n\u003cp\u003eAvoid eye and skin contact. Avoid breathing fumes - use in a well ventilated area. NIOSH approved respirator is recommended. Wear safety glasses, long sleeves and rubber gloves to minimize skin contact. This material has a high exotherm (generates heat). Do not mix components in glass or foam containers.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eCoverage \u003c\/em\u003e–\u003c\/strong\u003e A very small amount of \u003cstrong\u003eXTC-3D™\u003c\/strong\u003e is needed to coat an average size 3D print. 1 oz \/ 28.3 grams of mixed material will cover 101 in2 (651 cm2 ) applied at 1\/64” (.04 cm) thickness. Pre-Mix Part B: Before using, shake container vigorously.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eMeasuring and Dispensing\u003c\/em\u003e –\u003c\/strong\u003e You need to be accurate in measuring for \u003cstrong\u003eXTC-3D™\u003c\/strong\u003e to cure properly. Parts A and B can be measured by either volume or weight. Dispense proper proportions of parts A and B into clean plastic, metal or wax-free paper containers (do not use foam or glass cups).\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eExtending Working Time \u003c\/em\u003e-\u003c\/strong\u003e If left in a mixing cup with a concentrated mass, pot life will be short and material may cure in your cup due to exotherm. Important - Reduce the mass of the mixture to increase working time. Example: layer two sheets of aluminum foil together and create a single-use flat tray with vertical sides to contain the liquid resin. After mixing parts A and B, pour mixture into the aluminum foil to reduce the mass. Your working time will be significantly increased.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eMixing \u003c\/em\u003e–\u003c\/strong\u003e Be sure mixing utensils have a square edge and are clean. Combine and mix proper amounts of Parts A and B. Mix thoroughly for at least 1 minute. Aggressively scrape the sides and bottom of mixing container several times. Use the square edge of mixing stick to bring material off of the sides and bottom of container and blend.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eImportant - Mixed XTC-3D™ Resin is exothermic, meaning it generates heat. A large, concentrated mass of mixed material in a container can generate enough heat to melt a plastic cup, burn your skin or ignite combustible materials. If material begins to exotherm, move it outside to an open air environment.\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eAdding Color\u003c\/em\u003e -\u003c\/strong\u003e \u003cstrong\u003eXTC-3D™\u003c\/strong\u003e can be colored with \u003cstrong\u003eUVO™\u003c\/strong\u003e or\u003cstrong\u003e IGNITE™ \u003c\/strong\u003ecolorants. Pre-mix color with Part A before combining with Part B.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eAdding Fillers\u003c\/em\u003e -\u003c\/strong\u003e A variety of dry fillers can be added such as \u003cstrong\u003eCast Magic™\u003c\/strong\u003e or bronze or other metal powders, \u003cstrong\u003eGlow Worm™\u003c\/strong\u003e, \u003cstrong\u003eQuarry Tone™\u003c\/strong\u003e or \u003cstrong\u003eUre-Fil™\u003c\/strong\u003e powders. The maximum filler load is an amount equal to Part A by volume. Pre-mix filler with Part A before combining with Part B.\u003c\/p\u003e\r\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eApplying XTC-3D\u003c\/strong\u003e™\u003c\/em\u003e - Use a disposable chip brush or foam brush to apply \u003cstrong\u003eXTC-3D™\u003c\/strong\u003e. To achieve the thinnest coating possible we recommend applying material with a foam brush. Brushing on one thin layer of mixed material is recommended for most prints to create a smooth, uniform coating: less than 1\/64“(.039 cm). To avoid drips and runs, continue brushing and working the surface until the resin begins to set up. For particularly complicated prints with intricate detail you may want to coat one a section at a time for better control. \u003cstrong\u003eXTC-3D™\u003c\/strong\u003e bonds to itself.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eIf Adding More Layers\u003c\/em\u003e - \u003c\/strong\u003eallow first layer to partially cure until “tacky hard” before applying the next layer. For best results, each layer should be applied thinly: less than 1\/64“(.039 cm).\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eCuring\u003c\/em\u003e -\u003c\/strong\u003e One layer will cure tack free in about 2 hours at room temperature (73°F\/23°C). Mild heat (150° F\/60° C) will cure material within 15 minutes. \u003cstrong\u003eBe careful: \u003c\/strong\u003esome 3D print media will melt at temperatures above 200°F. Fully cured material will be hard and unable to penetrate with a finger nail.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003ePost Finishing \u003c\/em\u003e–\u003c\/strong\u003e Cured material can be machined or sanded (wear NIOSH approved respirator mask to prevent inhalation).\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003ePainting\u003c\/em\u003e –\u003c\/strong\u003e \u003cstrong\u003eXTC-3D™\u003c\/strong\u003e can be painted and\/or primed and then painted with acrylic enamel paints. For best results, lightly sand surface prior to painting.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eThinning XTC-3D™ for Coating Starch \/ Powder Printed Parts - \u003c\/em\u003e\u003c\/strong\u003eViscosity can be lowered with acetone or denatured alcohol to penetrate porous parts.\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eMix Ratio\u003c\/strong\u003e \u003cstrong\u003eCure Time\u003c\/strong\u003e \u003cstrong\u003eThin:\u003c\/strong\u003e Mix 200 Parts A + 100 Parts B + 25 Parts Solvent. 12 Hours \u003cstrong\u003eThinner:\u003c\/strong\u003e Mix 200 Parts A + 100 Parts B + 50 Parts Solvent. 24 Hours\u003c\/p\u003e\r\n\u003cp\u003eThe more solvent added, the longer \u003cstrong\u003eXTC-3D™\u003c\/strong\u003e will take to cure. Cured material will be more flexible.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eSmoothing Surface\u003c\/em\u003e –\u003c\/strong\u003e granular surface texture can be smoothed by applying a second coat of \u003cstrong\u003eXTC-3D™\u003c\/strong\u003e (for glossy finish) or lightly sanding for matte finish.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eApplying a Release Agent \u003c\/em\u003e–\u003c\/strong\u003e For applications where adhesion is not desired, a spray release \u003cstrong\u003eEase Release™ 200\u003c\/strong\u003e available from Smooth-On may be used.\u003c\/p\u003e\r\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eRemoving Uncured Material -\u003c\/strong\u003e\u003c\/em\u003e Scrape as much material as possible from the surface using a scraper. Clean the residue with \u003cstrong\u003eE-POX-EE KLEENER™\u003c\/strong\u003e available from Smooth-On, lacquer thinner, acetone or alcohol. Follow safety warnings pertaining to solvents and provide adequate ventilation.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eMaking Molds of Models Coated with XTC-3D™\u003c\/em\u003e:\u003c\/strong\u003e Liquid mold making rubbers will adhere to cured\u003cstrong\u003e XTC-3D™\u003c\/strong\u003e. Before mixing and applying Smooth-On silicone or urethane mold making rubbers, apply a thorough coating of \u003cstrong\u003eEase Release™ 200 or 205\u003c\/strong\u003e release agent over cured \u003cstrong\u003eXTC-3D™\u003c\/strong\u003e and let dry.\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/msds\/files\/XTC-3D.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSDS\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/tb\/files\/XTC3D_TB.pdf\" target=\"_blank\" rel=\"noopener\"\u003eTDS\u003c\/a\u003e\u003c\/p\u003e","brand":"Smooth-On","offers":[{"title":"6oz (0.4 lbs. \/ 0.18 kg.)","offer_id":48015767404859,"sku":"69624","price":14.99,"currency_code":"USD","in_stock":false},{"title":"24oz (1.42 lbs. \/ 0.64 kg.)","offer_id":48015767437627,"sku":"69642","price":35.99,"currency_code":"USD","in_stock":false},{"title":"Gallon Kit (11.4 lbs. \/ 5.17 kg.)","offer_id":48015767470395,"sku":"69661","price":192.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/XTC-3D-kit-boxes-1400-1050.jpg?v=1754767320"},{"product_id":"ex-74-epoxy","title":"EX-74 Epoxy","description":"\u003cdiv class=\"collapsible__content accordion__content rte\" id=\"ProductAccordion-collapsible_tab_NeMdia-template--24188852273436__main-product\"\u003e\n\u003cp\u003e EX-74 Resin is a durable, 2-part epoxy resin designed for table tops, countertops, and more. Its high-performance formula delivers a crystal-clear, high-gloss finish, perfect for enhancing the beauty of your surfaces. With easy application and long-lasting results, EX-74 is ideal for both beginners and professionals. \u003c\/p\u003e\n\u003cdiv class=\"collapsible__content accordion__content rte\" id=\"ProductAccordion-collapsible_tab_JKgF4i-template--24188852273436__main-product\"\u003e\n\u003cp\u003e✅ \u003cstrong\u003eCrystal-Clear Finish\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003eAchieve a stunning, high-gloss surface that makes your tabletops and countertops pop.\u003c\/p\u003e\n\u003cp\u003e✅ \u003cstrong\u003eBuilt to Last\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003eScratch-resistant, impact-resistant, and made to handle everyday wear and tear.\u003c\/p\u003e\n\u003cp\u003e✅ \u003cstrong\u003eUV Protection\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003eFormulated with enhanced UV resistance, EX-74 resists yellowing over time, keeping your projects looking fresh and clear even in sunlight.\u003c\/p\u003e\n\u003cp\u003e✅ \u003cstrong\u003eQuick Cure Time\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003eTack-free in just 4-6 hours with a full cure in 7 days, so your surfaces are ready for use in no time.\u003c\/p\u003e\n\u003cp\u003e✅ \u003cstrong\u003eVersatile Use\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003ePerfect for wood, concrete, and custom resin designs—ideal for tabletops, bars, and countertops.\u003c\/p\u003e\n\u003cp\u003e🚫 \u003cstrong\u003eNo More Dull Surfaces\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003eGet a durable, professional finish that stays strong and beautiful for years to come.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the maximum pour depth for EX-74?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e✨ EX-74 is designed for pours up to 1\/4 inch per layer. For thicker projects, it’s recommended to pour in multiple layers to prevent overheating.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long does it take for EX-74 to fully cure?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e⌛EX-74 reaches a tack-free state in about \u003cstrong\u003e4-6 hours\u003c\/strong\u003e and is fully cured within \u003cstrong\u003e7 days\u003c\/strong\u003e at room temperature (72°F\/22°C).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs EX-74 resistant to scratches and impacts?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e🔨 Yes, once cured, EX-74 provides a durable, scratch-resistant surface ideal for tabletops, countertops, and other high-use surfaces.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes EX-74 yellow over time?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e🪄 EX-74 includes \u003cstrong\u003eUV stabilizers\u003c\/strong\u003e to reduce yellowing, ensuring long-lasting clarity, even in areas exposed to sunlight.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat surfaces can I use EX-74 on?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e🌟 EX-74 works great on wood, concrete, and custom resin designs, making it perfect for creating beautiful tabletops, bar tops, and countertops.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs EX-74 food-safe?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e🥕 While EX-74 is durable and long-lasting, it is not certified as food-safe, so we recommend using it for decorative and functional surfaces rather than direct food contact.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan EX-74 be used outdoors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e⛅ EX-74 is designed for indoor use. Although it has UV stabilizers, prolonged exposure to outdoor conditions could affect its performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow should I store my resin to keep it in the best condition?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e❄️ Store your resin in a cool, dark place away from direct sunlight and high temperatures, ideally between 60°F and 75°F (15°C to 24°C). Keep the container tightly sealed to prevent moisture and air from affecting the formula. Wiping the container tops before sealing can help prevent stuck caps.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat are the best conditions for pouring and displaying resin projects?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e☀️For the best results, pour resin in a well-ventilated, temperature-controlled environment with humidity below 60% to prevent cloudiness and bubbles. Once cured, keep finished projects out of direct sunlight to prevent yellowing or warping.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/eti-usa.com\/content\/pdfs\/EX-74_Resin_Hardener_Combined.pdf\" title=\"SDS\" rel=\"noopener\" target=\"_blank\"\u003eSDS\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/eti-usa.com\/content\/pdfs\/ETI_TDS_EX-74_06-2009.pdf\" title=\"TDS\" rel=\"noopener\" target=\"_blank\"\u003eTDS\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/eti-usa.com\/content\/pdfs\/ETI_instructions_ex74_10-27-2020.pdf\" title=\"Instructions\" rel=\"noopener\" target=\"_blank\"\u003eInstructions\u003c\/a\u003e\u003c\/p\u003e\n\u003cdiv id=\"shopify-section-template--24188852273436__spacer_6U8z6x\" class=\"shopify-section section-spacer\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"small-12 columns\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"shopify-section-template--24188852273436__image_with_text_PYj37d\" class=\"shopify-section section-image-with-text\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"small-12 columns\"\u003e\n\u003cdiv class=\"image-with-text column-spacing--medium grid--image-medium image_first text-left section-spacing section-spacing--disable-top\" style=\"--color-bg: #ffffff; --color-text: #2c2d2e; --color-text-rgb: 44,45,46; --solid-button-background: #2c2d2e; --solid-button-background-hover: #1b1b1c; --solid-button-label: #ffffff; --bg-body: #ffffff; --color-border: #e2e2e2;\"\u003e\n\u003cdiv class=\"image-with-text--image image-with-text--inner\"\u003e\n\u003cdiv class=\"image-with-text--image-media aspect-ratio aspect-ratio--large\" style=\"--ratio-percent: 100%;\"\u003e\n\u003cdiv class=\"rte\"\u003e\n\u003cp\u003eEX-74 is the upgrade your table-top projects have been waiting for! With its \u003cstrong\u003ecrystal-clear\u003c\/strong\u003e, \u003cstrong\u003ehigh-gloss\u003c\/strong\u003e finish and tough \u003cstrong\u003edurability\u003c\/strong\u003e, your surfaces will stand out and stand strong.\u003c\/p\u003e\n\u003cp\u003ePerfect for tables, countertops, and more, EX-74 adds both beauty and long-lasting strength. It’s easy to use, resists yellowing with \u003cstrong\u003eUV protection,\u003c\/strong\u003e and ensures professional-quality results every time. Transform your projects with a resin that brings out the best in both form and function!\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"image-with-text--content image-with-text--inner\"\u003e\n\u003cdiv class=\"image-with-text--content--inner\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"ETI","offers":[{"title":"2 Gallon Kit","offer_id":48015848833339,"sku":"AL23500","price":199.99,"currency_code":"USD","in_stock":true},{"title":"10 Gallon Kit","offer_id":48015848866107,"sku":"AL23510","price":799.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/EX-74_2_Gal_Kit_copy__97804.1713813685.1280.1280-659728.jpg?v=1752617654"},{"product_id":"claritypro-tabletop-epoxy","title":"ClarityPro Tabletop Epoxy","description":"\u003cp\u003eA crystal-clear, UV-resistant tabletop epoxy engineered for glass-like pours, flawless clarity, and professional-grade durability—perfect for tables, charcuterie boards, deep finishes, and high-end resin work.\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEasy 2:1 mixing ratio\u003c\/li\u003e\n\u003cli\u003eUltra-high clarity formula for glass-like pours\u003c\/li\u003e\n\u003cli\u003eUV-resistant and non-yellowing—ideal for bright woods \u0026amp; clear finishes\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat’s Included?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1 Gallon Kit:\u003cbr\u003e\u003c\/strong\u003e- (1) Part A – Resin (2\/3 gal)\u003cbr\u003e- (1) Part B – Hardener (1\/3 gal)\u003c\/p\u003e\n\u003cp style=\"box-sizing: inherit; margin-bottom: 12px; margin-top: 12px; color: rgb(102, 102, 102); font-family: 'Instrument Sans', sans-serif; font-size: 15px; font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-weight: 500; letter-spacing: normal; orphans: 2; text-align: start; text-indent: 0px; text-transform: none; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; white-space: normal; background-color: rgb(255, 255, 255); text-decoration-thickness: initial; text-decoration-style: initial; text-decoration-color: initial;\"\u003e\u003cstrong style=\"box-sizing: inherit;\"\u003e3 Gallon Kit:\u003cbr style=\"box-sizing: inherit;\"\u003e\u003c\/strong\u003e- (1) Part A – Resin (2 gal)\u003cbr style=\"box-sizing: inherit;\"\u003e- (1) Part B – Hardener (1 gal)\u003c\/p\u003e\n\u003cp style=\"box-sizing: inherit; margin-bottom: 0px; margin-top: 12px; color: rgb(102, 102, 102); font-family: 'Instrument Sans', sans-serif; font-size: 15px; font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-weight: 500; letter-spacing: normal; orphans: 2; text-align: start; text-indent: 0px; text-transform: none; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; white-space: normal; background-color: rgb(255, 255, 255); text-decoration-thickness: initial; text-decoration-style: initial; text-decoration-color: initial;\"\u003e\u003cstrong style=\"box-sizing: inherit;\"\u003eBoth kits include:\u003cbr style=\"box-sizing: inherit;\"\u003e\u003c\/strong\u003e- Mixing instructions \u0026amp; safety guide\u003c\/p\u003e","brand":"Starbond","offers":[{"title":"Gallon","offer_id":51199124308283,"sku":"000126821015","price":140.0,"currency_code":"USD","in_stock":false},{"title":"3 Gallon","offer_id":51199124341051,"sku":"ClarityPro-3G","price":300.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/C3_clarity_pro_launch_1080x1080a-2.webp?v=1776797123"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/collections\/highglosscollection.png?v=1699741107","url":"https:\/\/maacaffestore.com\/collections\/high-gloss-epoxy-coating.oembed","provider":"The Compleat Sculptor, Inc","version":"1.0","type":"link"}