{"title":"Release Agents","description":"","products":[{"product_id":"price-driscoll-corp-eject-it-e33-12oz-spray-can-pe","title":"Supralease PTR (Formerly E33) 12oz Spray Can","description":"\u003cp\u003e \u003c\/p\u003e\n\u003csection class=\"row w3_bg\"\u003e\n\u003cdiv class=\"spb_content_element col-sm-6 spb_text_column w3_bg\"\u003e\n\u003cdiv style=\"margin-top: 0px; margin-bottom: 0px;\" class=\"spb-asset-content w3_bg\"\u003e\n\u003ch6\u003eDescription\u003c\/h6\u003e\n\u003cp\u003eSupralease PTR is a non-silicone release agent for molding and casting with aluminum, chrome, RTV silicone, epoxy, rubber, and steel molds. Allows molded parts to be painted, plated, hot stamped, adhesive bonded, labelled, or otherwise decorated in most applications. Approved for indirect food contact (21CFR 178.3570). Contains NO Chlorinated Solvents, NO Class I or Class II Ozone Depleting Substances.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"spb_content_element col-sm-6 spb_text_column w3_bg\"\u003e\n\u003cdiv style=\"margin-top: 0px; margin-bottom: 0px;\" class=\"spb-asset-content w3_bg\"\u003e\n\u003ch6\u003eFeatures\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eBroad range release for most molding and casting operations\u003c\/li\u003e\n\u003cli\u003ePaintable, non-silicone release\u003c\/li\u003e\n\u003cli\u003eWill not discolor or stain parts\u003c\/li\u003e\n\u003cli\u003eApproved for indirect food contact\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eRecommended Materials\u003c\/h6\u003e\n\u003cp\u003eMost plastics and rubbers, silicones, rigid, semi-rigid, and flexible urethanes, plaster and ceramics\u003c\/p\u003e\n\u003ch6\u003eRecommended Processes\u003c\/h6\u003e\n\u003cp\u003eMolding and casting with aluminum, chrome, RTV silicone, epoxy, rubber, and steel molds\u003c\/p\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" href=\"http:\/\/clintonb1.sg-host.com\/wp-content\/uploads\/2020\/07\/Supralease_PTR_Aerosol_TDS.pdf\" target=\"_blank\"\u003eTDS\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Price-Driscoll","offers":[{"title":"Default","offer_id":48014563508539,"sku":"70333","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/SupraleasePTR_Grp.png?v=1758762068"},{"product_id":"smooth-on-mann-release-300-12oz-spray-can","title":"Mann Ease Release™ 300 12oz Spray Can (0.75 lbs. \/ 0.34 kg.)","description":"\u003cp\u003eEase Release 300 is a high performance, production proven release agent formulated for polyurethane elastomers and epoxy resins along with excellent release of polyurethane elastomers and microcellular foams. Ease Release 300 leaves very little build-up on the molds resulting from isocyanate or epoxy reactions, while maintaining part cleanability with common degreasing solvents. Cleaned parts molded with Ease Release 300 can be painted or bonded. Ease Release 300 is effective on all mold surfaces such as steel, aluminum, chrome, epoxy, and RTV urethane and silicone mold materials.\u003c\/p\u003e\r\n\u003ch2\u003eFeatures:\u003c\/h2\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eEase Release 300 is easy to apply, fast drying and effective over a broad temperature range from 70°F to 500°F.\u003c\/li\u003e\r\n\u003cli\u003eEase Release 300 provides excellent release with a semi-gloss finish. Precise duplication of mold details, less mold maintenance and down time which results in greater productivity.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003carticle\u003e\r\n\u003ch3\u003eApplication:\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eThoroughly clean your mold with Mold Cleaner 2508 or any suitable cleaner to remove all traces of previous coating and oils.\u003c\/li\u003e\r\n\u003cli\u003eApply Ease Release 300 using aerosol spray for bulk grades. Hold the can or spray gun 6 to 8 inches from the mold surface to ensure a light even coating. When the molds are new or have been blasted with an abrasive “season” the mold by applying a heavy coating of release. Heat the mold to process temperature, then wipe the excess with a rag and reapply a light coating of Ease Release 300 before regular molding.\u003c\/li\u003e\r\n\u003cli\u003eEase Release 300 is fast drying and requires no baking during the normal molding process.\u003c\/li\u003e\r\n\u003cli\u003eReapply a light coating before each molding.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003c\/article\u003e\r\n\u003cdiv class=\"dividerline\"\u003e \u003c\/div\u003e\r\n\u003carticle class=\"finishing\"\u003e\r\n\u003ch4\u003eFinishing:\u003c\/h4\u003e\r\n\u003cp\u003eThorough cleaning of molded parts is required prior to staining, painting or bonding.\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/msds\/files\/er300.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSDS\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shoplightspeed.com\/shops\/606431\/files\/51109011\/er300.pdf\" target=\"_blank\" rel=\"noopener\"\u003eTDS\u003c\/a\u003e\u003c\/p\u003e\r\n\u003c\/article\u003e","brand":"Smooth-On","offers":[{"title":"Default","offer_id":48014577860923,"sku":"70033","price":18.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/er300-hero.png?v=1710974478"},{"product_id":"smooth-on-mann-release-2910-12oz-spray-can","title":"Mann Ease Release™ 2910 12oz Spray Can (0.75 lbs. \/ 0.34 kg.)","description":"\u003cp\u003e\u003c\/p\u003e\u003cdiv class=\"header-container\"\u003e\r\n\u003csection class=\"container product\"\u003e\r\n\u003carticle class=\"one-half\"\u003e\r\n\u003cp\u003eEase Release 2910 is a superior release agent for casting complex designs using polyurethane elastomers. The 2910 is a heavy-duty silicone based product in a solvent carrier that gives a high gloss surface finish on the molded parts. This product also releases compression molded Thiokol rubbers, EPDM and other synthetic elastomers. Ease Release 2910 release agent works on aluminum, chrome, epoxy, and polyurethane molds.\u003c\/p\u003e\r\n\u003ch2\u003eFeatures:\u003c\/h2\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eEase Release 2910 is easy to apply, fast drying and effective over a broad temperature range from 70°F to 500°F.\u003c\/li\u003e\r\n\u003cli\u003eEase Release 2910 provides excellent release, excellent surface finish, precise duplication of mold details and dimensions with minimum mold maintenance and down time for increased productivity.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003c\/article\u003e\r\n\u003c\/section\u003e\r\n\u003c\/div\u003e\r\n\u003csection class=\"product-summary\"\u003e\r\n\u003cdiv class=\"container\"\u003e\r\n\u003carticle\u003e\r\n\u003ch3\u003eApplication:\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eThoroughly clean your mold with Mold Cleaner 2508 or any suitable cleaner to remove all traces of previous coating and oils.\u003c\/li\u003e\r\n\u003cli\u003eApply Ease Release 2910 using aerosol spray for bulk grades. Hold the can or spray gun 6 to 8 inches from the mold surface to ensure a light even coating. When the molds are new or have been blasted with an abrasive, “season” the mold by applying a heavy coating of release. Heat the mold to process temperature, then wipe the excess with a rag and reapply a light coating of Ease Release 2910 before regular molding.\u003c\/li\u003e\r\n\u003cli\u003eEase Release 2910 is fast drying and requires no baking during the normal molding process.\u003c\/li\u003e\r\n\u003cli\u003eReapply a light coating before each molding.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003c\/article\u003e\r\n\u003cdiv class=\"dividerline\"\u003e \u003c\/div\u003e\r\n\u003carticle class=\"finishing\"\u003e\r\n\u003ch4\u003eFinishing:\u003c\/h4\u003e\r\n\u003cp\u003eParts molded with Ease Release 2910 must be sanded or machined to remove the shiny surface before painting or bonding.\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/msds\/files\/ER2910.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSDS\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shoplightspeed.com\/shops\/606431\/files\/51109013\/er2910.pdf\" target=\"_blank\" rel=\"noopener\"\u003eTDS\u003c\/a\u003e\u003c\/p\u003e\r\n\u003c\/article\u003e\r\n\u003c\/div\u003e\r\n\u003c\/section\u003e","brand":"Smooth-On","offers":[{"title":"Default","offer_id":48014583202107,"sku":"70293","price":18.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/er2910-hero.png?v=1710974641"},{"product_id":"smooth-on-mann-release-700-12oz-spray-can","title":"Mann Ease Release™ 700 12oz Spray Can (0.75 lbs. \/ 0.34 kg.)","description":"\u003cp\u003eEase Release 700 is a general purpose release agent. Ease Release 700 is designed to release polystyrene, polyethylene, wax, synthetic rubber, acrylics, phenolic, melamine and metal castings from aluminum, chrome, epoxy, polyester, rubber, and steel molds. Ease Release 700 is also effective as a surface lubricant for assembling plastic and rubber components.\u003c\/p\u003e\r\n\u003ch2\u003eFeatures:\u003c\/h2\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eEasy to apply\u003c\/li\u003e\r\n\u003cli\u003eFast drying\u003c\/li\u003e\r\n\u003cli\u003eEffective over a broad temperature range from 70°F to 500°F\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003eEase Release 700 provides:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eExcellent release\u003c\/li\u003e\r\n\u003cli\u003eExcellent surface finish\u003c\/li\u003e\r\n\u003cli\u003eNo build-up on mold surfaces\u003c\/li\u003e\r\n\u003cli\u003eReduced mold maintenance and down time\u003c\/li\u003e\r\n\u003cli\u003eGreater productivity\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003carticle\u003e\r\n\u003ch3\u003eApplication:\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eThoroughly clean your mold with Mold Cleaner 2508 or any suitable cleaner to remove all traces of previous coating and oils.\u003c\/li\u003e\r\n\u003cli\u003eApply Ease Release 700 using aerosol spray. Hold the can 6 to 8 inches from the mold surface to ensure a light, even coating. When the molds are new or have been blasted with an abrasive, “season” the mold by applying a heavy coating of release. Heat the mold to process temperature, then wipe the excess with a rag and reapply a light coating of Ease Release before a regular molding.\u003c\/li\u003e\r\n\u003cli\u003eEase Release 700 is fast drying and requires no baking during the normal molding process.\u003c\/li\u003e\r\n\u003cli\u003eReapply a light coating before each molding.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003c\/article\u003e\r\n\u003cdiv class=\"dividerline\"\u003e \u003c\/div\u003e\r\n\u003carticle class=\"finishing\"\u003e\r\n\u003ch4\u003eFinishing:\u003c\/h4\u003e\r\n\u003cp\u003eThorough cleaning of molded parts with Isopropyl Alcohol may be required prior to staining, painting, or bonding.\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/msds\/files\/er700.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSDS\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shoplightspeed.com\/shops\/606431\/files\/51109012\/er700.pdf\" target=\"_blank\" rel=\"noopener\"\u003eTDS\u003c\/a\u003e\u003c\/p\u003e\r\n\u003c\/article\u003e","brand":"Smooth-On","offers":[{"title":"Default","offer_id":48014583333179,"sku":"70073","price":17.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/er700-hero.png?v=1710974644"},{"product_id":"artmolds-moldez-alginate-hair-release","title":"MoldEZ Alginate Hair Release","description":"\u003cp\u003eMoldEZ Hair and Mold Release Water soluble! This gem of a product is a \"must have\" for every lifecaster Avoid the hassle and win your model over with MoldEZ. Use this water-based release cream instead of petroleum jelly on the skin and all body hair. Washes out the first time unlike petroleum-based jellies. Work a generous amount into the hair and then comb. You can cast an entire head of hair. Also great to fill pin holes in your MoldGel and alginate molds prior to casting. Another handy idea - use it to hold your MoldGel or alginate mold to the mother mold around the edges. Hypoallergenic, all natural ingredients. Smells great, too.\u003c\/p\u003e","brand":"ArtMolds","offers":[{"title":"Default","offer_id":48014589985083,"sku":"SM300101W","price":18.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/moldez-1000px.jpg?v=1710974836"},{"product_id":"polytek-pol-ease-2300-12oz-spray-can","title":"Pol-Ease 2300 12oz Spray Can","description":"\u003cdiv class=\"commerce-product-field commerce-product-field-commerce-price field-commerce-price node-142-product-commerce-price\"\u003e\n\u003cdiv class=\"table-responsive\"\u003e\n\u003cdiv class=\"commerce-product-field commerce-product-field-commerce-price field-commerce-price node-142-product-commerce-price\"\u003e\n\u003cdiv class=\"table-responsive\"\u003ePol-Ease\u003csup\u003e®\u003c\/sup\u003e 2300 Release Agent is a multi-purpose, silicone-based release agent in a convenient aerosol spray can.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFor Mold Making:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eApply to non-porous or sealed models when making\u003cspan\u003e \u003c\/span\u003epolyurethane rubber\u003cspan\u003e \u003c\/span\u003eor plastic molds (do not use with liquid silicone rubber).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFor Casting:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eApply to cured polyurethane molds when casting a variety of materials, including polyurethane liquid plastics, rubber or epoxies.\u003c\/p\u003e\n\u003cp\u003eAfter spraying, brush out this release agent with a soft brush to help improve results. No drying time necessary.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFOR INDUSTRIAL\/PROFESSIONAL USE ONLY. \u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch4\u003eMore Information\u003c\/h4\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003ca class=\"sds\" href=\"https:\/\/polytek.com\/content\/pdf\/SDS\/Polytek_SDS_Ease-2300-2500-14_03-07-2014.pdf\" target=\"_blank\"\u003eSafety Data Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca class=\"tds\" href=\"https:\/\/polytek.com\/content\/pdf\/other\/SealerandReleaseAgent_SelectionGuide_0.pdf\" target=\"_blank\"\u003eRelease Agent \u0026amp; Sealer Selection Guide\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Polytek","offers":[{"title":"Default","offer_id":48014601388347,"sku":"2300","price":21.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/polease2300.png?v=1710975142"},{"product_id":"eti-polyester-mold-release-and-conditioner-4oz","title":"Mold Release And Conditioner 4oz","description":"\u003cp\u003eAll molds require mold release when casting with Clear Polyester Casting Resin. We recommend Mold Release\/Conditioner as a release agent and to clean, condition and extend the life of your molds. Convenient 4 oz. spray pump for easy of application. Odorless, solvent free. 4 oz\/118 ml.\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/eti-usa.com\/content\/pdfs\/Castin%27_Craft_Mold_Release_Conditioner.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSDS\u003c\/a\u003e\u003c\/p\u003e","brand":"ETI","offers":[{"title":"Default","offer_id":48014602109243,"sku":"62809","price":11.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/eti-castincraft-mold-release-33900-4oz-front-24631.jpg?v=1710975176"},{"product_id":"geiss-destin-and-dunn-castor-oil-4oz","title":"Castor Oil 4oz","description":"","brand":"Geiss, Destin and Dunn","offers":[{"title":"Default","offer_id":48014696448315,"sku":"VJ00093A","price":5.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/vj00093.jpg?v=1710976752"},{"product_id":"geiss-destin-and-dunn-mineral-oil-16oz","title":"Mineral Oil 16oz","description":"","brand":"Geiss, Destin and Dunn","offers":[{"title":"Default","offer_id":48014709424443,"sku":"VJ00168","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/ai00168.jpg?v=1710976897"},{"product_id":"pol-ease-2500-12oz-spray-can","title":"Pol-Ease 2500 12oz Spray Can","description":"\u003cp\u003ePol-Ease\u003csup\u003e®\u003c\/sup\u003e\u003cspan\u003e \u003c\/span\u003e2500 is an \u003ca\u003eaerosol spray\u003c\/a\u003e release agent that can be washed off of models and castings. It is the preferred choice when castings need to be painted.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFor Mold Making:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eApply to non-porous or sealed models when making silicone rubber molds (not recommended for use with liquid polyurethane rubbers).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFor Casting:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e1) Apply to silicone rubber molds when casting liquid silicone rubber. 2) To extend mold life, apply to silicone molds when casting materials such as polyurethane plastics, rubbers or epoxies (release agent is not needed for this process, but can extend mold life). 3) Apply to polyurethane molds before casting polyurethane liquid plastics (The molds will not last as long as they would if Pol-Ease\u003csup\u003e®\u003c\/sup\u003e\u003cspan\u003e \u003c\/span\u003e2300 Release Agent was used. The main reason for using Pol-Ease\u003csup\u003e®\u003c\/sup\u003e\u003cspan\u003e \u003c\/span\u003e2500 in a polyurethane mold would be to cast a part that can be cleaned more easily than a part covered with Pol-Ease\u003csup\u003e®\u003c\/sup\u003e\u003cspan\u003e \u003c\/span\u003e2300. This is beneficial when painting cast parts).\u003c\/p\u003e\n\u003cp\u003eAfter spraying, brush out this release agent with a soft brush to help improve results. No drying time necessary.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFOR INDUSTRIAL\/PROFESSIONAL USE ONLY. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"flex flex-top bg-grey custom-fields\"\u003e\n\u003cdiv class=\"flex-75 more-info container\" style=\"padding-left: 0; padding-right: 0;\"\u003e\n\u003ch4\u003eMore Information\u003c\/h4\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003ca class=\"sds\" href=\"https:\/\/polytek.com\/content\/pdf\/SDS\/Polytek_SDS_Ease-2300-2500-14_03-07-2014.pdf\" target=\"_blank\"\u003eSafety Data Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca class=\"tds\" href=\"https:\/\/polytek.com\/content\/pdf\/other\/SealerandReleaseAgent_SelectionGuide_0.pdf\" target=\"_blank\"\u003eRelease Agent \u0026amp; Sealer Selection Guide\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Polytek","offers":[{"title":"Default","offer_id":48014766506299,"sku":"2500spray","price":22.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/polease2500.png?v=1710977944"},{"product_id":"smooth-on-aquacon-gallon","title":"AquaCon™ Gallon (8.3 lbs. \/ 3.76 kg.)","description":"\u003cdiv class=\"info\"\u003e\n\u003cp\u003e\u003cstrong\u003eAquaCon™\u003c\/strong\u003e is a water based concrete release agent that aids in releasing concrete castings from Smooth-On rubber molds and other surfaces such as melamine, metal and non-porous (sealed) wood. It provides a clean, positive release, does not interfere with color or surface detail and helps minimize bug holes and air bubbles in finished castings.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCoverage – \u003c\/strong\u003eApplied in a thin film (.0005 in \/ .013 mm), 1 gallon (undiluted) covers 3,200 square feet \/ 297 square meters.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"features\"\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLow Cost – Use straight or dilute with water (up to 8 parts with water. See dilution recommendation below).\u003c\/li\u003e\n\u003cli\u003eWater Based, Eco-Friendly – Contains no VOC’s, carcinogens or oils harmful to the environment.\u003c\/li\u003e\n\u003cli\u003eDoes Not Stain Concrete, affect color surface detail or finishing.\u003c\/li\u003e\n\u003cli\u003eMinimizes “Bug Holes” and air bubbles.\u003c\/li\u003e\n\u003cli\u003eContains No Oils that will cause rubber molds to soften, shrink or swell.\u003c\/li\u003e\n\u003cli\u003eKeeps Molds Clean - Does not build up.\u003c\/li\u003e\n\u003cli\u003eExtends Mold Life\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"instructions\"\u003e\n\u003ca name=\"instructions\"\u003e\u003c\/a\u003e\n\u003ch2\u003eInstructions\u003c\/h2\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003ePREPARATION... Safety \u003c\/strong\u003e\u003c\/em\u003e- Wear safety glasses to minimize contamination risk. Store and use at room temperature (73°F\/23°C). Do not use below 45°F\/8°C.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003ePre-Mixing -\u003c\/strong\u003e\u003c\/em\u003e Before dispensing, shake container or stir thoroughly with a paddle or drill mixer set on a slow speed to a uniform consistency.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eDiluting AquaCon™\u003c\/em\u003e \u003c\/strong\u003e- \u003cstrong\u003eAquaCon™\u003c\/strong\u003e can be used straight or diluted with up to 8 parts water. The dilution ratio depends on your concrete mix design. Finding the right balance between \u003cstrong\u003eAquaCon™\u003c\/strong\u003e and water can affect bug holes. If using on a new rubber mold, it is recommended that \u003cstrong\u003eAquaCon™\u003c\/strong\u003e be used straight (undiluted) for each casting for the first 10 castings. 1 – 10 castings, use undiluted. After 10 castings, dilute 1 part \u003cstrong\u003eAquaCon™\u003c\/strong\u003e : 4 Parts Water After 20 castings, dilute 1 part \u003cstrong\u003eAquaCon™\u003c\/strong\u003e : 8 Parts Water Mix only amount needed for one day. Mixture may separate in the container after a few hours. Before dispensing, pre-mix before to a uniform consistency.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eApplying\u003c\/em\u003e \u003c\/strong\u003e- Coat mold surface with a very thin film (.0005 in \/ .013 mm). Apply with a brush, roller, HVLP gun or \u003cstrong\u003eKwikee™ Sprayer\u003c\/strong\u003e. Do not allow release agent to pool in the mold. Wipe over mold surface using a clean, soft cloth.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCaution: Do Not Over Apply.\u003c\/strong\u003e Applying too much release agent will cause air bubbles “wormtracks”, “bugholes” or pitting on surfaces. After applying \u003cstrong\u003eAquaCon™\u003c\/strong\u003e to mold surface, you can mix and cast concrete immediately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMixture may separate after 24 hours.\u003c\/strong\u003e If mixture separates, re-mix to a uniform consistency and apply. Because no two applications are quite the same, a small test application to determine suitability for your project is recommended if performance of this material is in question.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/msds\/files\/AquaCon.pdf\" rel=\"noopener\" target=\"_blank\"\u003eSDS\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/tb\/files\/AQUACON_TB_ECO.pdf\" rel=\"noopener\" target=\"_blank\"\u003eTDS\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Smooth-On","offers":[{"title":"Default","offer_id":48014767849787,"sku":"72091","price":26.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/Aquacon-gallon-1400x1050.jpg?v=1748698293"},{"product_id":"pam-original-no-stick-cooking-spray-12oz","title":"Pam Original No-Stick Cooking Spray 12oz","description":"\u003cp\u003eNo-Stick Cooking Spray, Original, made with Canola Oil Blend\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp\u003eIngredients\u003c\/p\u003e\r\n\u003cp\u003eCanola Oil*\u003ci class=\"ListItem__Chevron-plxinm-3 clVVtK fa fa-chevron-right\"\u003e \u003c\/i\u003eCoconut Oil*\u003ci class=\"ListItem__Chevron-plxinm-3 clVVtK fa fa-chevron-right\"\u003e \u003c\/i\u003ePalm Oil*\u003ci class=\"ListItem__Chevron-plxinm-3 clVVtK fa fa-chevron-right\"\u003e \u003c\/i\u003eSoy Lecithin (Prevents Sticking)\u003ci class=\"ListItem__Chevron-plxinm-3 clVVtK fa fa-chevron-right\"\u003e \u003c\/i\u003eDimethyl Silicone (Anti Foaming Agent)\u003ci class=\"ListItem__Chevron-plxinm-3 clVVtK fa fa-chevron-right\"\u003e \u003c\/i\u003eAlso Contains Propellant To Dispense Spray\u003c\/p\u003e","brand":"PAM","offers":[{"title":"Default","offer_id":48015195078971,"sku":null,"price":10.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/pam.png?v=1710982348"},{"product_id":"palmolive-liquid-dish-soap-126-oz","title":"Palmolive Liquid Dish Soap 12.6 oz","description":"\u003cp\u003eGreat release for gypsums and cements as well as releasing your prosthetics. Not to mention it is easy on the hands and can clean your dishes...\u003c\/p\u003e","brand":"The Compleat Sculptor, Inc","offers":[{"title":"Default","offer_id":48015396176187,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/palmolive-12.jpg?v=1710984996"},{"product_id":"mann-ease-release-200","title":"Mann Ease Release™ 200","description":"\u003cp\u003e\u003cstrong\u003eEase Release™ 200\u003c\/strong\u003e is an excellent general purpose release agent for making molds and casting parts. This product will release polyurethane elastomers, epoxy resin, polyester resins, RTV silicones, rubber, and thermoplastic polymers. \u003cstrong\u003eEase Release™ 200\u003c\/strong\u003e is effective on aluminum, chrome, RTV silicone, epoxy, rubber, and steel molds.\u003c\/p\u003e\n\u003cp\u003eFeatures\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEasy to apply\u003c\/li\u003e\n\u003cli\u003eFast drying\u003c\/li\u003e\n\u003cli\u003eEffective over a broad temperature range from 70°F to 500°F\u003c\/li\u003e\n\u003cli\u003eExcellent release\u003c\/li\u003e\n\u003cli\u003ePrecise duplication of mold details\u003c\/li\u003e\n\u003cli\u003eLess rejects, faster production\u003c\/li\u003e\n\u003cli\u003eMatte finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shoplightspeed.com\/shops\/606431\/files\/51053141\/easerelease200205.png\" alt=\"\" width=\"600\" height=\"320\"\u003e\u003c\/p\u003e\n\u003cp\u003eInstructions\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eSafety\u003c\/strong\u003e\u003c\/em\u003e - Use in a properly ventilated area (“room size” ventilation). Wear safety glasses, long sleeves and rubber gloves to minimize contamination risk. Skin contact may cause dryness.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStore and use material at room temperature (73°F\/23°C).\u003c\/strong\u003e This product has a limited shelf life and should be used as soon as possible.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSHAKE WELL BEFORE USING\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eApplying\u003c\/em\u003e\u003c\/strong\u003e - Thoroughly clean your mold with \u003cstrong\u003eMold Cleaner 2508\u003c\/strong\u003e or any suitable cleaner to remove all traces of previous coatings and oils. Apply \u003cstrong\u003eEase Release™ 200\u003c\/strong\u003e using aerosol spray or spray equipment for bulk grades. Hold the can (or spray gun) 6 to 8 inches from the mold surface to ensure a light, even coating. When the molds are new or have been blasted with an abrasive, “season” the mold by applying a heavy coating of release. Heat the mold to process temperature, then wipe the excess with a rag and reapply a light coating of \u003cstrong\u003eEase Release™ 200\u003c\/strong\u003e before a regular molding. \u003cstrong\u003eEase Release™ 200\u003c\/strong\u003e is fast drying and requires no baking during the normal molding process. Reapply a light coating before each molding.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eFinishing\u003c\/strong\u003e\u003c\/em\u003e - Thorough cleaning of molded parts is required prior to staining, painting, or bonding.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/msds\/files\/ER200.pdf\" rel=\"noopener\" target=\"_blank\"\u003eSDS\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/tb\/files\/er200.pdf\" rel=\"noopener\" target=\"_blank\"\u003eTDS\u003c\/a\u003e\u003c\/p\u003e","brand":"Smooth-On","offers":[{"title":"12oz Spray Can (0.75 lbs. \/ 0.34 kg.)","offer_id":48015692398907,"sku":null,"price":18.99,"currency_code":"USD","in_stock":true},{"title":"Case of 12 Spray Cans (9 lbs. \/ 4.08 kg.)","offer_id":48015692431675,"sku":"70023","price":166.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/man-ease-release-200-12cs-533x400.jpg?v=1710988074"},{"product_id":"mann-ease-release-205","title":"Mann Ease Release™ 205","description":"\u003cp\u003e\u003cstrong\u003eEase Release™ 205\u003c\/strong\u003e is a versatile liquid release agent that is used for a variety mold making and casting applications. This product will release liquid urethane rubber from cured urethane rubber and a variety of surfaces. It will also release silicone rubber from itself and a variety of surfaces.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEase Release™ 205\u003c\/strong\u003e can also be used to release epoxy, and urethane resins as well as thermoplastics. \u003cstrong\u003eEase Release™ 205\u003c\/strong\u003e is effective on a variety of substrates including steel, aluminum, chrome, epoxy, urethane rubber and plastics, sealed plasters, sealed concrete and wax.  \u003c\/p\u003e\n\u003cp\u003eFeatures\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEasy to apply\u003c\/li\u003e\n\u003cli\u003eFast drying\u003c\/li\u003e\n\u003cli\u003eEffective over a broad temperature range from 70°F to 500°F\u003c\/li\u003e\n\u003cli\u003eExcellent release\u003c\/li\u003e\n\u003cli\u003eWill not interfere with detail reproduction\u003c\/li\u003e\n\u003cli\u003eMatte finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shoplightspeed.com\/shops\/606431\/files\/51053141\/easerelease200205.png\" alt=\"\" width=\"600\" height=\"320\"\u003e\u003c\/p\u003e\n\u003cp\u003eInstructions\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eModel Preparation –\u003c\/strong\u003e\u003c\/em\u003e if making molds using urethane or silicone rubber, the model surface may need to be sealed (using a sealing agent) before applying release agent. Read the technical bulletin for the mold rubber you are using before proceeding.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eAPPLYING EASE RELEASE™ 205\u003c\/em\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafety First – \u003c\/strong\u003eDo not smoke or use ignition sources when using sealing or release agents. Use only with good ventilation. Store and use at room temperature.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eShake well before using\u003c\/li\u003e\n\u003cli\u003eHold spritzer pump 6 in.\/ 15 cm. from surface to be sprayed.\u003c\/li\u003e\n\u003cli\u003eApply a light mist coating to all surfaces that will contact the rubber or casting material including model or mold surface and surrounding forms. \u003cstrong\u003eDO NOT OVER APPLY. \u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eUsing a soft brush, brush the release agent over all surfaces. Allow to dry for 10 minutes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eImportant -\u003c\/strong\u003e this product has a limited shelf life and should be used as soon as possible.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEase Release™ 205\u003c\/strong\u003e is available in an easy-to-use aerosol called \u003cstrong\u003eEase Release™ 200\u003c\/strong\u003e. For additional information, safety recommendations, or technical assistance please contact us at 610-252-5800.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eAVAILABILITY\u003c\/em\u003e -\u003c\/strong\u003e \u003cstrong\u003eEase Release™ 205\u003c\/strong\u003e, along with the entire line of release agents and mold cleaners, are available through our network of quality distributors located throughout the world.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCAUTION -\u003c\/strong\u003e Use adequate protection when handling any release solvent system. Skin contact may cause dryness. Wear safety glasses or their equivalent to prevent eye injury. Avoid inhalation of excessive amounts of solvent vapor. Do not smoke or use ignition sources when using any solvent system. \u003cstrong\u003eAlways consult Material Safety Data Sheet before using any sealer or release agent. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/msds\/files\/ER205.pdf\" rel=\"noopener\" target=\"_blank\"\u003eSDS\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/tb\/files\/ER205.pdf\" rel=\"noopener\" target=\"_blank\"\u003eTDS\u003c\/a\u003e\u003c\/p\u003e","brand":"Smooth-On","offers":[{"title":"Pint (0.75 lbs. \/ 0.34 kg.)","offer_id":48033078149435,"sku":"71285","price":22.99,"currency_code":"USD","in_stock":true},{"title":"Gallon (6 lbs. \/ 2.72 kg.)","offer_id":48429433356603,"sku":"71286","price":69.99,"currency_code":"USD","in_stock":false},{"title":"5 Gallon (30.1 lbs. \/ 13.65 kg.)","offer_id":48429433389371,"sku":"71287","price":299.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/ease-release-205-combo-533x400-1-1_6452a30a-a065-4e27-a9d4-f6050ce5f248.jpg?v=1711298737"},{"product_id":"mann-ease-release-2831","title":"Mann Ease Release™ 2831","description":"\u003cp\u003e\u003cstrong\u003eEase Release™ 2831 \u003c\/strong\u003eis a wax-based non-silicone release agent. It has proven to be effective when used to release polyurethane foams elastomers. \u003cstrong\u003eEase Release™ 2831\u003c\/strong\u003e works with aluminum, steel, and elastomeric mold construction.\u003c\/p\u003e\r\n\u003cp\u003eFeatures\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eExcellent Release\u003c\/li\u003e\r\n\u003cli\u003eNon-Silicone\u003c\/li\u003e\r\n\u003cli\u003eContains no chlorinated or CFC solvents\u003c\/li\u003e\r\n\u003cli\u003eLow wax build-up\u003c\/li\u003e\r\n\u003cli\u003eIncreased productivity\u003c\/li\u003e\r\n\u003cli\u003eExcellent cleanability\u003c\/li\u003e\r\n\u003cli\u003eLow environmental hazards\u003c\/li\u003e\r\n\u003cli\u003eLow mold maintenance\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shoplightspeed.com\/shops\/606431\/files\/51053142\/easerelease2831.png\" alt=\"\" width=\"600\" height=\"320\"\u003e\u003c\/p\u003e\r\n\u003cp\u003eInstructions\u003c\/p\u003e\r\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eSafety\u003c\/strong\u003e\u003c\/em\u003e - Use in a properly ventilated area (“room size” ventilation). Wear safety glasses, long sleeves and rubber gloves to minimize contamination risk. Skin contact may cause dryness.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eStore and use material at room temperature (73°F\/23°C).\u003c\/strong\u003e This product has a limited shelf life and should be used as soon as possible.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eSHAKE WELL BEFORE USING\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eApplying\u003c\/strong\u003e\u003c\/em\u003e - Apply a coat of \u003cstrong\u003eEase Release™ 2831\u003c\/strong\u003e with a spray or brush, and allow to dry. Rub \u003cstrong\u003eEase Release™ 2831\u003c\/strong\u003e into mold surface with a clean cloth. Repeat two or three times to seal the mold surface. Start molding and reapply a light coat of \u003cstrong\u003eEase Release™ 2831\u003c\/strong\u003e after each molding cycle.\u003c\/p\u003e\r\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eFinishing\u003c\/strong\u003e\u003c\/em\u003e - Thorough cleaning of the molded parts is recommended prior to bonding or any other post mold finishing.\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/msds\/files\/ER2831.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSDS\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/tb\/files\/ER2831.pdf\" target=\"_blank\" rel=\"noopener\"\u003eTDS\u003c\/a\u003e\u003c\/p\u003e","brand":"Smooth-On","offers":[{"title":"Pint (0.8 lbs. \/ 0.36 kg.)","offer_id":48015693381947,"sku":"71195","price":22.99,"currency_code":"USD","in_stock":false},{"title":"Gallon (6 lbs. \/ 2.72 kg.)","offer_id":48015693414715,"sku":"71196","price":52.99,"currency_code":"USD","in_stock":true},{"title":"5 Gallon (30 lbs. \/ 13.61 kg.)","offer_id":51570761924923,"sku":null,"price":229.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/ease-release-2831-combo.jpg?v=1710988092"},{"product_id":"in-out-ii","title":"In \u0026 Out™ II","description":"\u003cp\u003e\u003cstrong\u003eIN \u0026amp; OUT™ II\u003c\/strong\u003e water soluble release agent will aid in releasing concrete or gypsum plaster castings from Smooth-On rubber molds. \u003cstrong\u003eIN \u0026amp; OUT™ II \u003c\/strong\u003eprovides a clean, positive release and does not interfere with or affect surface detail and helps minimize air bubbles in finished castings.\u003c\/p\u003e\n\u003cp\u003eFeatures\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWill Not Stain \/ Soften Concrete Surfaces\u003c\/li\u003e\n\u003cli\u003eMix with Water - Economical\u003c\/li\u003e\n\u003cli\u003eWill Not Affect Color Pigmenting of Cast Concrete\u003c\/li\u003e\n\u003cli\u003eMinimizes “Bug Holes” In Concrete and Air Bubbles in Gypsum Castings\u003c\/li\u003e\n\u003cli\u003eKeeps Molds Clean - Does Not Build Up\u003c\/li\u003e\n\u003cli\u003eSignificantly Extends Mold Life\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eInstructions\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIN \u0026amp; OUT™ II IS DILUTED WITH WATER.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMeasuring \u0026amp; Mixing -\u003c\/strong\u003e Mix 4 parts water to 1 part In \u0026amp; Out II. Mixing can be done by hand or slow speed mixer. Do not shake or agitate as this may cause product to foam.\u003c\/p\u003e\n\u003cp\u003eHow you dilute \u003cstrong\u003eIN \u0026amp; OUT II™\u003c\/strong\u003e (amount mixed with water, coverage and frequency of application) will depend on the concrete aggregate mix and the form material you are casting into. For example, when casting concrete with a low grit\/high sand content (minimal abrasion) into a polyurethane mold, the mix ratio of water to \u003cstrong\u003eIN \u0026amp; OUT II™\u003c\/strong\u003e can be 4 : 1. High grit content may call for a dilution ratio of 2 parts water to 1 part release agent.\u003c\/p\u003e\n\u003cp\u003eMix only amount needed for one day. Mixture may separate after 24 hours. Re-mix to a uniform consistency and apply.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplication - \u003c\/strong\u003eApply \u003cstrong\u003eIN \u0026amp; OUT™ II \u003c\/strong\u003ethoroughly with brush, roller or spray. If pressure spraying, pressure should be 25 psi (172 kPa) or higher. For uniform spray applications of release agent, flat spray tips are suggested. Do not allow release agent to puddle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCaution: Do Not Over Apply.\u003c\/strong\u003e Applying too much release agent will cause air bubbles “wormtracks”, “bugholes” or pitting on surfaces.\u003c\/p\u003e\n\u003cp\u003eBecause no two applications are quite the same, a small test application to determine suitability for your project is recommended if performance of this material is in question.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/msds\/files\/In_And_Out_II.pdf\" rel=\"noopener\" target=\"_blank\"\u003eSDS\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/tb\/files\/IN_\u0026amp;_OUT_II_TB.pdf\" rel=\"noopener\" target=\"_blank\"\u003eTDS\u003c\/a\u003e\u003c\/p\u003e","brand":"Smooth-On","offers":[{"title":"8oz Trial Size (0.46 lbs. \/ 0.21 kg.)","offer_id":48015693775163,"sku":"66MR4","price":14.99,"currency_code":"USD","in_stock":true},{"title":"Gallon (7.4 lbs. \/ 3.36 kg.)","offer_id":48015693807931,"sku":"89661","price":78.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/inandout-ii-4gal-cs-hand-533x400-1.jpg?v=1713393553"},{"product_id":"universal-mold-release","title":"Universal™ Mold Release","description":"\u003cp\u003e\u003cstrong\u003eUniversal™ Mold Release\u003c\/strong\u003e Agent is formulated especially for mold making and casting, and works well with most liquid rubber and liquid plastic products. It will release mold rubbers (such as polyurethanes and polysulfides) from properly prepared models. Sealing porous models (wood, plaster, concrete) or certain modeling clays (containing water or sulfur) with Smooth-On \u003cstrong\u003eSuperSeal™ \u003c\/strong\u003eor other sealer may be necessary.\u003cstrong\u003e Universal™ Mold Release\u003c\/strong\u003e is effective over a broad temperature range from 70°F to 500°F.\u003c\/p\u003e\n\u003cp\u003eFeatures\u003c\/p\u003e\n\u003cp\u003eIf using silicone rubber, seal model surface with \u003cstrong\u003eSuperSeal™ \u003c\/strong\u003eonly. Do not use\u003cstrong\u003e Universal™ Mold Release. Universal™ Mold Release\u003c\/strong\u003e also easily releases a variety of casting materials (epoxies, Smooth-On liquid plastics, etc.) from cured rubber molds. This product has a limited shelf life and should be used as soon as possible. Properly used,\u003cstrong\u003e Universal™ Mold Release\u003c\/strong\u003e improves molding efficiency for a variety of casting applications and will actually lengthen the life of your production mold.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUniversal™ Mold Release\u003c\/strong\u003e is available in aerosol spray or economical liquid form (one gallon, 5 gallon and 55 gallon drum.)\u003c\/p\u003e\n\u003cp\u003e\u003cimg height=\"520\" width=\"680\" alt=\"\" src=\"https:\/\/cdn.shoplightspeed.com\/shops\/606431\/files\/51053143\/universallinehero.png\"\u003e\u003c\/p\u003e\n\u003cp\u003eInstructions\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAerosol USE ONLY WITH ADEQUATE VENTILATION:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eShake well before using.\u003c\/li\u003e\n\u003cli\u003eHold can 12 in.\/30cm. from surface to be sprayed.\u003c\/li\u003e\n\u003cli\u003eApply a continuous light mist coating to model or mold surface and surrounding forms.\u003c\/li\u003e\n\u003cli\u003eUsing a soft brush, brush the release agent over entire surface of model or mold in order to break the surface tension and minimize air entrapment.\u003c\/li\u003e\n\u003cli\u003eApply another light mist coating of release agent and let stand for 5 minutes.\u003c\/li\u003e\n\u003cli\u003eYou are now ready to apply mold rubber or cast into a cured rubber mold.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eLiquid Application:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThis product has a limited shelf life and should be used as soon as possible.\u003c\/li\u003e\n\u003cli\u003eCan be put into non-aerosol plant sprayer, deck sprayer, or applied with soft brush.\u003c\/li\u003e\n\u003cli\u003eApply thorough thin coating over entire surface of model or mold.\u003c\/li\u003e\n\u003cli\u003eAllow surface solvents to evaporate for 5 minutes.\u003c\/li\u003e\n\u003cli\u003eCompressed air or hair dryer may be used to blow off any excess that has pooled.\u003c\/li\u003e\n\u003cli\u003eRepeat application and allow to dry.\u003c\/li\u003e\n\u003cli\u003eYou are now ready to apply mold rubber or cast into a cured rubber mold.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBecause no two applications are quite the same, a small test application to determine suitability is recommended if performance of this material is in question.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePainting A Finished Casting…\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOne method for applying paint to a casting is to remove release agent from casting with a solvent such as isopropyl alcohol or acetone. Next, apply one to two coats of auto body primer (available at most auto parts stores) and let dry. Finally, apply acrylic or similar base paint.\u003c\/p\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" href=\"https:\/\/www.smooth-on.com\/msds\/files\/Universal_Mold_Release_Aerosol.pdf\" target=\"_blank\"\u003eSDS Aerosol\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" href=\"https:\/\/www.smooth-on.com\/msds\/files\/Universal_Mold_Release_Liquid.pdf\" target=\"_blank\"\u003eSDS Liquid\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" href=\"https:\/\/www.smooth-on.com\/tb\/files\/UNIVERSAL_MOLD_RELEASE.pdf\" target=\"_blank\"\u003eTDS\u003c\/a\u003e\u003c\/p\u003e","brand":"Smooth-On","offers":[{"title":"12oz Spray Can (0.75 lbs. \/ 0.34 kg.)","offer_id":48429676101947,"sku":"66MR1","price":18.99,"currency_code":"USD","in_stock":true},{"title":"Case of 12 Spray Cans (9 lbs. \/ 4.08 kg.)","offer_id":48429676134715,"sku":"70013","price":174.99,"currency_code":"USD","in_stock":true},{"title":"Gallon (6.1 lbs. \/ 2.77 kg.)","offer_id":48033082573115,"sku":"84660A","price":70.99,"currency_code":"USD","in_stock":false},{"title":"5 Gallon (30.5 lbs. \/ 13.83 kg.)","offer_id":48429676167483,"sku":"84670A","price":284.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/universalcombo.jpg?v=1748564480"},{"product_id":"sonite-wax","title":"Sonite™ Wax","description":"\u003cp\u003e\u003cstrong\u003eSonite™ Wax\u003c\/strong\u003e is a soft paste wax suitable for sealing porous surfaces prior to applying Smooth-On mold rubber. \u003cstrong\u003eSonite™ Wax\u003c\/strong\u003e will aid in releasing mold rubber from a variety of model surfaces and can be used for other industrial applications. Application of a mold release agent may be necessary after\u003cstrong\u003e Sonite™ Wax\u003c\/strong\u003e has dried. Consult technical bulletin of mold rubber product for complete details.\u003c\/p\u003e\r\n\u003cp\u003eFeatures\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eLess Solvent – Higher % Solids\u003c\/li\u003e\r\n\u003cli\u003eLow Odor\u003c\/li\u003e\r\n\u003cli\u003eEasy To Apply\u003c\/li\u003e\r\n\u003cli\u003eFast Drying\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shoplightspeed.com\/shops\/606431\/files\/51052038\/sonitelinehero.png\" alt=\"\" width=\"680\" height=\"520\"\u003e\u003c\/p\u003e\r\n\u003cp\u003eInstructions\u003c\/p\u003e\r\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eSafety\u003c\/strong\u003e\u003c\/em\u003e - \u003cstrong\u003eCONTENTS FLAMMABLE: \u003c\/strong\u003eKeep product away from flame and all ignition sources. Use in a properly ventilated area (“room size” ventilation). Wear safety glasses, long sleeves and rubber gloves to minimize contamination risk.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eStore and use material at room temperature (73°F\/23°C). \u003c\/strong\u003eThis product has a limited shelf life and should be used as soon as possible.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eAPPLYING... \u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eFor surfaces with smooth contours, \u003cstrong\u003eSonite™ Wax\u003c\/strong\u003e can be applied by wiping on with a soft, lint-free cloth. Any excess should be removed. For porous surfaces, apply wax and let dry. Repeat and let dry. After applying final coat, let dry 20-30 minutes before buffing with a clean soft cloth or brush to produce a glossy surface (optional). If applying urethane mold rubber (\u003cstrong\u003eVytaFlex™\u003c\/strong\u003e, \u003cstrong\u003eReoFlex™\u003c\/strong\u003e or \u003cstrong\u003eBrush-On™ 40\u003c\/strong\u003e), follow application of \u003cstrong\u003eSonite™ Wax\u003c\/strong\u003e with a thorough coating of \u003cstrong\u003eUniversal™ Mold Release\u003c\/strong\u003e or \u003cstrong\u003eEase Release™ 200\u003c\/strong\u003e (available from Smooth-On).\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eBecause no two applications are quite the same, a small test application to determine suitability for your project is recommended if performance of this material is in question.\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/msds\/files\/Sonite_Wax.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSDS\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/tb\/files\/SONITE_WAX_TB.pdf\" target=\"_blank\" rel=\"noopener\"\u003eTDS\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Smooth-On","offers":[{"title":"1oz (0.06 lbs. \/ 0.03 kg.)","offer_id":48015695020347,"sku":"91522","price":7.99,"currency_code":"USD","in_stock":false},{"title":"Quart (1.75 lbs. \/ 0.79 kg.)","offer_id":48015695053115,"sku":"91552","price":24.0,"currency_code":"USD","in_stock":false},{"title":"Gallon (7 lbs. \/ 3.18 kg.)","offer_id":48015695085883,"sku":"91560A","price":75.0,"currency_code":"USD","in_stock":true},{"title":"5 Gallon (35 lbs. \/ 15.88 kg.)","offer_id":50218304536891,"sku":"91570A","price":245.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/Sonite-Wax-combo-1400x1050.jpg?v=1754768338"},{"product_id":"green-soap-tincture","title":"Green Soap Tincture","description":"\u003cp\u003eGreen Soap (Potter's Soap)-A soap suspension, for releasing a variety of castings.\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eConcentrated formula\u003c\/li\u003e\r\n\u003cli\u003e30% alcohol by volume\u003c\/li\u003e\r\n\u003cli\u003ePleasant odor\u003c\/li\u003e\r\n\u003cli\u003eExternal use only\u003c\/li\u003e\r\n\u003cli\u003eBiodegradable\u003c\/li\u003e\r\n\u003cli\u003eSkin prepping\u003c\/li\u003e\r\n\u003cli\u003eStencil application\u003c\/li\u003e\r\n\u003cli\u003eGlycerin and potassium soap\u003c\/li\u003e\r\n\u003cli\u003eAvailable in 2 sizes:\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"The Compleat Sculptor, Inc","offers":[{"title":"8oz","offer_id":48015696134459,"sku":"88011","price":9.99,"currency_code":"USD","in_stock":true},{"title":"Gallon","offer_id":48015696167227,"sku":"88012","price":42.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/greensoapgallon.jpg?v=1710988124"},{"product_id":"poly-pva-solution","title":"Poly PVA Solution","description":"\u003cp\u003ePoly PVA Solution is a water-soluble, removable sealer and release agent. Poly PVA Solution is available in both colorless and green varieties. The green option is typically used if it is difficult to see where the liquid has already been applied on the model. If green Poly PVA Solution is used, test to make sure that no staining occurs on the model.\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFOR INDUSTRIAL\/PROFESSIONAL USE ONLY. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFor Mold Making:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003ePoly PVA Solution can be brushed lightly over any porous surface that needs to be sealed. It dries to the touch within an hour (depending upon coating thickness and workshop humidity). The advantage of Poly PVA Solution is that is can be removed with water once the mold making process is complete. It is suitable for use with both silicone and polyurethane mold rubbers; however, additional release agent (i.e., Pol-Ease\u003csup\u003e®\u003c\/sup\u003e\u003cspan\u003e \u003c\/span\u003e2300 Release Agent) must be applied when working with liquid polyurethane rubbers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFor Casting:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ePoly PVA Solution can also be applied to cured polyurethane rubber molds as a “barrier coat” (in conjunction with Pol-Ease\u003csup\u003e®\u003c\/sup\u003e\u003cspan\u003e \u003c\/span\u003e2300 Release Agent) and is most often used when casting polyester resin (some resins, such as polyurethane, do not require a barrier coat). PVA Solution should be allowed to completely dry before pouring any casting material into the mold. Generally, Poly PVA Solution needs to be reapplied before each use, as it often comes out of the mold when removing the casting. NOTES: Words of caution: Even though Poly PVA Solution can be removed, do not expect the model to look exactly the same after the mold making process as before. Removable PVA is helpful when a customer needs a model returned to as close to original as possible; however, residual PVA, release agent (if used over the PVA) or the application of water to a model may change its physical appearance (e.g., color, texture) to some extent. If the PVA is left on the model (not washed off with water), it should continue to act as a sealer the next time a mold is made. Do not use a water-based release agent on a PVA-sealed model as this will dissolve the PVA, negating its ability to seal the surface of the model. If the model is to be washed with water, it obviously must be made of a material compatible with this process.\u003c\/p\u003e\n\u003ch4\u003eMore Information\u003c\/h4\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003ca class=\"sds\" href=\"https:\/\/polytek.com\/content\/pdf\/SDS\/Polytek_SDS_PVA_09-04-2014.pdf\" target=\"_blank\"\u003eSafety Data Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca class=\"tds\" href=\"https:\/\/polytek.com\/content\/pdf\/other\/SealerandReleaseAgent_SelectionGuide_0.pdf\" target=\"_blank\"\u003eRelease Agent \u0026amp; Sealer Selection Guide\u003c\/a\u003e\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit Sizes\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2-lb Unit of Poly PVA Solution is approximately 1 quart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e35-lb Unit of Poly PVA Solution is approximately 5 gallons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"Polytek","offers":[{"title":"Clear 2lb Quart","offer_id":48015696593211,"sku":"PVACLR","price":25.0,"currency_code":"USD","in_stock":true},{"title":"Green 2lb Quart","offer_id":48015696625979,"sku":"PVA","price":25.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/pvaclear.png?v=1710988128"},{"product_id":"royal-jel-e","title":"Royal Jel-E","description":"\u003cp\u003eRoyal JeL-E is an excellent water based mold release developed especially for casting silicone into silicone.\u003cbr\u003e\u003cbr\u003eThis unique solution is applied by lightly brushing Royal JeL-E into your silicone mold, creating a film over the entire surface. Use a hairdryer to speed-up the drying process. After demolding Royal JeL-E rinses off clean with warm water leaving your cured silicone piece clean of contaminants and residue.\u003cbr\u003e\u003cbr\u003eIt's also great for floating clay sculptures off plaster lifecasts! Apply 2 coats, drying between each, before sculpting. When ready, soak the lifecast in warm water for a few hours till the Royal Jel-E softens, then float the sculpture off.\u003cbr\u003e\u003cbr\u003eUse Vinyl or Nitrile gloves when working with Royal JeL-E.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.fusefx.ca\/_files\/ugd\/80ab92_46786114bc4146f2a6454826023a38e3.pdf\" rel=\"noopener\" target=\"_blank\"\u003eSDS\u003c\/a\u003e\u003c\/p\u003e","brand":"FUSEFX","offers":[{"title":"115g","offer_id":48015698690363,"sku":"43457051","price":17.99,"currency_code":"USD","in_stock":true},{"title":"250g","offer_id":48015698723131,"sku":"43457052","price":25.99,"currency_code":"USD","in_stock":true},{"title":"500g","offer_id":48015698755899,"sku":"43457053","price":42.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/jeleesmall.png?v=1713650685"},{"product_id":"body-double-release-cream","title":"Body Double™ Release Cream","description":"\u003cp\u003e\u003cstrong\u003eBody Double\u003c\/strong\u003e™\u003cstrong\u003e Release Cream\u003c\/strong\u003e is a non-toxic skin conditioner that will aid in releasing \u003cstrong\u003eBody Double™\u003c\/strong\u003e mold rubber from skin surfaces with or without hair. \u003cstrong\u003eBody Double™ Release Cream\u003c\/strong\u003e is skin safe and certified by an independent laboratory. It washes off with soap and water. It is highly concentrated, so a little goes a long way. To use, wash intended body section with soap and water and dry thoroughly. Liberally apply \u003cstrong\u003eBody Double™ Release Cream\u003c\/strong\u003e to all skin surfaces (bare and hair covered) that will contact \u003cstrong\u003eBody Double™\u003c\/strong\u003e mold rubber. Take special care to aggressively message and work the cream into and over body hair.\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/msds\/files\/Body_Double_Release_Cream.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSDS\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/tb\/files\/SkinSafeDocs\/BodyDoubleReleaseCreamSkinSafeCertification111919.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSkin Safety Certification\u003c\/a\u003e\u003c\/p\u003e","brand":"Smooth-On","offers":[{"title":"1oz (0.06 lbs. \/ 0.03 kg.)","offer_id":48015699149115,"sku":"84222","price":4.99,"currency_code":"USD","in_stock":false},{"title":"3.5oz (0.22 lbs. \/ 0.1 kg.)","offer_id":48015699181883,"sku":"84242","price":13.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/BodyDoubleCream-combo-1400x1050.jpg?v=1748698463"},{"product_id":"frekote-lifft","title":"Frekote Lifft","description":"\u003cdiv class=\"product__features\"\u003eSilicone, solvent based, sacrificial mold release agent offering a high gloss finish with excellent part detail and mold geometry retention.\u003c\/div\u003e\n\u003cdiv class=\"product__features\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"product__descriptionText\" data-original-html=\"LOCTITE® FREKOTE® LIFFT is a silicone, solvent based, sacrificial mold release agent that offers a high gloss finish with excellent part detail and mold geometry retention. This product can be applied to steel, aluminum, epoxy, ceramic and flexible mold surfaces. This product was developed for use with polyurethane foam and cast elastomers.\"\u003eLOCTITE® FREKOTE® LIFFT is a silicone, solvent based, sacrificial mold release agent that offers a high gloss finish with excellent part detail and mold geometry retention. This product can be applied to steel, aluminum, epoxy, ceramic and flexible mold surfaces. This product was developed for use with polyurethane foam and cast elastomers.\u003c\/div\u003e\n\u003cdiv class=\"product__descriptionText\" data-original-html=\"LOCTITE® FREKOTE® LIFFT is a silicone, solvent based, sacrificial mold release agent that offers a high gloss finish with excellent part detail and mold geometry retention. This product can be applied to steel, aluminum, epoxy, ceramic and flexible mold surfaces. This product was developed for use with polyurethane foam and cast elastomers.\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"product__descriptionText\" data-original-html=\"LOCTITE® FREKOTE® LIFFT is a silicone, solvent based, sacrificial mold release agent that offers a high gloss finish with excellent part detail and mold geometry retention. This product can be applied to steel, aluminum, epoxy, ceramic and flexible mold surfaces. This product was developed for use with polyurethane foam and cast elastomers.\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/DOSDB_SDS_000000000001857659_000000466463_MSDS_UT_US_EN.PDF?v=1750439081\" target=\"_blank\" title=\"SDS\" rel=\"noopener\"\u003eSDS\u003c\/a\u003e\u003c\/div\u003e","brand":"Loctite","offers":[{"title":"9.5oz Spray Can","offer_id":48015699640635,"sku":"4390111","price":36.99,"currency_code":"USD","in_stock":true},{"title":"Case of 12 Spray Cans","offer_id":48015699673403,"sku":"4390112","price":399.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/loctite-lifft-1857659-frekote-9oz.webp?v=1710988163"},{"product_id":"sepr-8-release","title":"SEPR-8 Release","description":"\u003cp\u003eA release agent appropriate for both Aqua-Resin and plaster.\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/static1.squarespace.com\/static\/57a37c9d03596ee87a251dab\/t\/60fc5706094a930b5884de9b\/1627150087163\/A%E2%80%A2R.SEPR-8.instructions-2.pdf\" target=\"_blank\" rel=\"noopener\"\u003eINSTRUCTIONS\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/static1.squarespace.com\/static\/57a37c9d03596ee87a251dab\/t\/5cf94322620f4c000185fb30\/1559839523534\/SDS+AQUA-RESIN+SEPR-8+6.6.19.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSDS\u003c\/a\u003e\u003c\/p\u003e","brand":"Aquaresin","offers":[{"title":"8oz","offer_id":48015700132155,"sku":"40003","price":19.99,"currency_code":"USD","in_stock":true},{"title":"64oz","offer_id":48015700164923,"sku":"40004","price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/sepr8combo.png?v=1710988169"},{"product_id":"stamp-and-roller-release","title":"Stamp and Roller Release","description":"\u003cp\u003eBuddy Rhodes Stamp and Roller Release is a bubble gum scented solvent release agent that aids in texturing Buddy Rhodes™ Vertical Mix by preventing the concrete sticking to texture stamps or rollers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBenefits\/Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCreates a good barrier between tools and concrete\u003c\/li\u003e\n\u003cli\u003eEvaporates and leaves behind no residue\u003c\/li\u003e\n\u003cli\u003eEconomical\u003c\/li\u003e\n\u003cli\u003eEasy to use\u003c\/li\u003e\n\u003cli\u003ePleasant bubble gum scent\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eUsage\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhile the mix is in the plastic state, Buddy Rhodes Vertical Mix can be easily stamped or textured. Pour Stamp and Roller Release into a clean spray bottle or pump sprayer. Apply a fine mist of release directly to texture stamp or roller prior to pressing into the soft concrete surface. It can be used with both silicone and polyurethane stamps. Stamp and Roller Release may damage the spray mechanisms in some spray bottles. Test to ensure suitability. Clean texture tools with dishwashing soap and water after use to prevent damage, especially to polyurethanes. Do not attempt to thin Buddy Rhodes Stamp and Roller Release with other materials.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConditions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor best results store and use at 73ºF\/23ºC.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli class=\"doc\"\u003e\n\u003cdiv data-count=\"1\"\u003e\n\u003cdiv\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/msds\/files\/BUDDY%20RHODES%20STAMP%20AND%20ROLLER%20RELEASE_REV.1.pdf\" class=\"infodoc\" target=\"_blank\"\u003e\u003cspan\u003eDownload SDS\u003c\/span\u003e\u003c\/a\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli class=\"doc\"\u003e\n\u003cdiv data-count=\"2\"\u003e\n\u003cdiv\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/tb\/files\/BUDDY_RHODES_STAMP_AND_ROLLER_RELEASE_TDS.pdf\" class=\"infodoc\" target=\"_blank\"\u003e\u003cspan\u003eTechnical Bulletin\u003c\/span\u003e\u003c\/a\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Buddy Rhodes","offers":[{"title":"Pint","offer_id":48015700918587,"sku":"10029410","price":15.0,"currency_code":"USD","in_stock":true},{"title":"Gallon","offer_id":48015700951355,"sku":"10029461","price":34.0,"currency_code":"USD","in_stock":true},{"title":"5 Gallon","offer_id":48015700984123,"sku":"10029462","price":127.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/stamp-and-roller-release-1000x1000-grouped-1.jpg?v=1713544208"},{"product_id":"par-nc-release-agent","title":"Zep-Par NC Silicone Release Agent","description":"\u003cp\u003ePar NC is a silicone lubricant and release agent that reduces friction between moving parts and releases plastics and resins from molds. It removes from surfaces with the use of a general purpose degreaser, allowing for problem-free painting, coating and bonding of molded parts. The colorless lubricant is excellent for aluminum die casting and other high-temperature applications; renews rubber and vinyl trim; and lubricates locks, hinges and window channels. Par NC is packaged in a convenient aerosol form.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eREDUCES FRICTION: Silicone lubricant and release agent that reduces friction between moving parts to decrease wear\u003c\/li\u003e\n\u003cli\u003eEASY REMOVAL: Removes from surfaces with the use of a general purpose degreaser, allowing for problem-free painting, coating and bonding of molded parts\u003c\/li\u003e\n\u003cli\u003eVERSATILE APPLICATION: Perfect for tables, sewing machines, needles and zippers and hand irons in apparel manufacturers, accessory manufacturers, automotive repair shops, vehicle manufacturers, and paper goods facilities\u003c\/li\u003e\n\u003cli\u003eExcellent for aluminum die casting and other high-temperature applications; renews rubber and vinyl trim; and lubricates locks, hinges and window channels\u003c\/li\u003e\n\u003cli\u003eApproved for use in federally inspected meat and poultry plants where there is no possibility of food contact and is an alternative to chlorinated solvents\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSafety Items:\u003c\/strong\u003e Gloves; Glasses; Mask; Ventilation\u003c\/p\u003e","brand":"ZEP","offers":[{"title":"Default","offer_id":48015790407995,"sku":"690858010704","price":27.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/10701.webp?v=1735932281"},{"product_id":"foam-latex-mold-release","title":"Foam Latex Mold Release","description":"\u003cp\u003eThis is our standard stearate based mold release included with every Monster Makers Theatrical Foam Latex Kit. Also, popular for use in releasing gel filled appliances.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.monstermakers.com\/content\/pdfs\/SDS%20MFMR%20-%20Monster%20Makers%20Mold%20Release.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSDS\u003c\/a\u003e\u003c\/p\u003e","brand":"Monster Makers","offers":[{"title":"Size : 4oz","offer_id":48016682352955,"sku":"MFMR4","price":10.0,"currency_code":"USD","in_stock":true},{"title":"Size : 16oz","offer_id":48016682385723,"sku":"MFMR16","price":19.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/mfmr.jpg?v=1710999768"},{"product_id":"mann-ease-release-400-12oz-spray-can-075lbs-034kg","title":"Mann Ease Release™ 400 12oz Spray Can (0.75 lbs. \/ 0.34 kg.)","description":"\u003cp\u003e  Ease Release™ 400\u003c\/p\u003e\n\u003cp\u003eEase Release 400 is a highly efficient release agent designed to release polyurethane elastomers, Thiokol rubbers, EPDM and other synthetic elastomers from aluminum, chrome, epoxy, polyester, rubber and steel molds.\u003c\/p\u003e\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEase Release 400 is easy to apply, fast drying and effective over a broad temperature range from 70°F to 500°F.\u003c\/li\u003e\n\u003cli\u003eEase Release 400 provides excellent release and surface finish to molded parts. Ease Release 400 also provides multiple release in many instances. Precise duplication of mold detail and dimension with minimum mold maintenance and down time resulting in greater productivity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e Application:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThoroughly clean your mold with Mold Cleaner 2508 or any suitable cleaner to remove all traces of previous coating and oils.\u003c\/li\u003e\n\u003cli\u003eApply Ease Release 400 using aerosol spray for bulk grades. Hold the can or spray gun 6 to 8 inches from the mold surface to ensure a light even coating. When the molds are new or have been blasted with an abrasive, “season” the mold by applying a heavy coating of release. Heat the mold to process temperature, then wipe the excess with a rag and reapply a light coating of Ease Release 400 before regular molding.\u003c\/li\u003e\n\u003cli\u003eEase Release 400 is fast drying and requires no baking during the normal molding process.\u003c\/li\u003e\n\u003cli\u003eReapply a light coating before each molding.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFinishing:\u003c\/p\u003e\n\u003cp\u003eFinished parts must be abraded prior to any post mold finishing such as bonding or painting. For suggested cleaning procedures, consult a technical representative.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/msds\/files\/er400.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSDS\u003c\/a\u003e\u003c\/p\u003e","brand":"Smooth-On","offers":[{"title":"Default","offer_id":48016713548091,"sku":"70043","price":17.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/er400-hero.png?v=1711000536"},{"product_id":"pol-ease-2650-release-agent-15lb","title":"Pol-Ease® 2650 Release Agent 1.5lb","description":"\u003cp\u003ePol-Ease® 2650 is a silicone-free release agent designed for use when casting concrete or plaster into polyurethane rubber molds. Brush or spray as light of a coating as possible into the mold. Casting can be done immediately as no drying time is needed. \u003cstrong\u003eNOTE:\u003c\/strong\u003e Shake or stir before use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFOR INDUSTRIAL\/PROFESSIONAL USE ONLY. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/polytek.com\/content\/pdf\/SDS\/Polytek_SDS_Pol-Ease-2650_02-10-2015.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSDS\u003c\/a\u003e\u003c\/p\u003e","brand":"Polytek","offers":[{"title":"Default","offer_id":48016900915515,"sku":"2650","price":23.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/polease2650.png?v=1711001891"},{"product_id":"supralease-crn-wax-based-release-12oz-spray-can","title":"Supralease CRN Wax Based Release 12oz Spray Can","description":"\u003cp\u003eSupralease CRN is a pure carnauba wax release, ideal for thermoset encapsulation molding.\u003c\/p\u003e","brand":"Price-Driscoll","offers":[{"title":"Default","offer_id":48019406979387,"sku":null,"price":24.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/supralease-crn.png?v=1711031710"},{"product_id":"uninhibited-spray-12oz","title":"Uninhibited Spray 12oz","description":"\u003cp\u003e\u003cstrong\u003eUninhibited \u003c\/strong\u003eis a solvent based resin coating that dries to a non-reactive finish in just 2 hours. This opaque coating is the best way to seal your surfaces for making a platinum-based silicone mold. It works on sulfurated clay, HDU and many more troublesome surfaces.\u003c\/p\u003e\n\u003cp\u003eNo More Inhibitions!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDIRECTIONS: \u003c\/strong\u003eAs with all sprays use in a well-ventilated area with the proper safety equipment: goggles or a face shield, vapor respirator, protective clothing and gloves when handling product. Store in temperatures between 50-90°F. \u003cstrong\u003eSHAKE WELL BEFORE USING.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e1)    Clean the surface from dust and try not to touch the piece with bare hands. Moisture may interfere with the Coating. It may manifest itself as a cloudy finish and\/or as a possible bonding problem.\u003c\/p\u003e\n\u003cp\u003e2)    Shake can well for a few minutes prior to using.\u003c\/p\u003e\n\u003cp\u003e3)    Spray on thin coats and build up to get the desired thickness\u003c\/p\u003e\n\u003cp\u003e4)    Allow 30 min between coats - Typically, spray should be 8-12 inches away to achieve a smooth coating.\u003c\/p\u003e\n\u003cp\u003e5)    Reapply as needed to achieve a contiguous coat (Usually 2-3)\u003c\/p\u003e\n\u003cp\u003e6)    Allow 2 hours minimum before applying silicone to the surface\u003c\/p\u003e\n\u003cp\u003ePlease note this is considered to be a permanent finish.\u003c\/p\u003e","brand":"TCS Uninhibited","offers":[{"title":"Copper","offer_id":48019423068475,"sku":null,"price":26.99,"currency_code":"USD","in_stock":true},{"title":"Grey","offer_id":48019423101243,"sku":null,"price":26.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/uninhibitedcollection.png?v=1711031863"},{"product_id":"vaseline-petroleum-jelly","title":"Vaseline\/Petroleum Jelly","description":"\u003cp\u003eVaseline\/Petroleum Jelly is a great inexpensive release for bodycasting materials and silicone rubbers. \u003c\/p\u003e\r\n\u003cp\u003eIt also works well for chapped lips, protecting minor scrapes and preventing rashes and chafing due to incontinence... (For any medical application consult your doctor!) \u003c\/p\u003e\r\n\u003cp\u003eActive Ingredients WHITE PETROLATUM USP 100%\u003c\/p\u003e","brand":"Geiss, Destin and Dunn","offers":[{"title":"3.75oz","offer_id":48019429261627,"sku":"VH00689","price":3.69,"currency_code":"USD","in_stock":true},{"title":"13oz","offer_id":48019429294395,"sku":"VH00686","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/petrojell375oz.webp?v=1713997743"},{"product_id":"pva-mold-release","title":"PVA Mold Release 8oz","description":"\u003cp\u003eA water soluble, film forming coating useful as a barrier coat on certain rubber molds to allow resins to be cast in them without sticky surfaces. While urethane molds do not cause sticky surfaces on resin castings, PVA may be used as a barrier coat in some cases to prevent resin attack on the mold. Also may be useful as a removable sealer for porous surfaces alone or in conjunction with paste wax. The green film of PVA can be washed off with water. Available in clear or colors. The green and purple may stain some porous surfaces.\u003c\/p\u003e","brand":"Sculpt Nouveau","offers":[{"title":"Clear","offer_id":49522559582523,"sku":"","price":7.5,"currency_code":"USD","in_stock":false},{"title":"Purple","offer_id":49522559615291,"sku":"","price":7.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/FullSizeRender_02394167-a87d-4b64-bdb9-25f8a04f7ea5.jpg?v=1758832646"},{"product_id":"ease-release™-500-spray-can","title":"Mann Ease Release™ 500 Spray Can","description":"\u003cdiv class=\"header-container\"\u003e\n\u003csection class=\"container product\"\u003e\n\u003carticle class=\"one-half\"\u003e\n\u003cp\u003eEase Release 500 is a TEFLON™-like dry film mold release (and dry lubricant) that contains no silicones, oils or wax. Ease Release 500 is non-migrating and non-staining. It is effective and improves efficiency in many molding processes including injection, compression, transfer, vacuum form and die cast molding.\u003c\/p\u003e\n\u003ch2\u003eFeatures:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFast drying\u003c\/li\u003e\n\u003cli\u003eEffective over a broad temperature range from 70°F to 400°F\u003c\/li\u003e\n\u003cli\u003eEasy to apply\u003c\/li\u003e\n\u003cli\u003eNon staining, non migrating\u003c\/li\u003e\n\u003cli\u003eInert with outstanding thermal and chemical stability\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eEase Release 500 provides:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExcellent release\u003c\/li\u003e\n\u003cli\u003eMatte surface finish on molded parts\u003c\/li\u003e\n\u003cli\u003eEase of post finishing molded parts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/article\u003e\n\u003carticle class=\"one-half\"\u003e\u003cbr\u003e\u003c\/article\u003e\n\u003c\/section\u003e\n\u003c\/div\u003e\n\u003csection class=\"product-summary\"\u003e\n\u003cdiv class=\"container\"\u003e\n\u003carticle\u003e\n\u003ch3\u003eApplication - Processing Using Metal Molds\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThoroughly clean your mold with Mold Cleaner 2508 or any suitable cleaner to remove all traces of previous coating and oils.\u003c\/li\u003e\n\u003cli\u003eApply Ease Release 500 using aerosol spray for bulk grades. Hold the can or spray gun 6 to 8 inches from the mold surface to ensure a light even coating. When the molds are new or have been blasted with an abrasive, “season” the mold by applying a heavy coating of release. Heat the mold to process temperature, then wipe the excess with a rag and reapply a light coating of Ease Release 500 before regular molding.\u003c\/li\u003e\n\u003cli\u003eEase Release 500 is fast drying and requires no baking during the normal molding process.\u003c\/li\u003e\n\u003cli\u003eReapply a light coating before each molding.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCAUTION:\u003c\/strong\u003e Heating this product to temperatures above 500°F will create fumes that can cause flu like systems. \u003cstrong\u003eUse with adequate ventilation.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/article\u003e\n\u003cdiv class=\"dividerline\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003carticle class=\"finishing\"\u003e\n\u003ch4\u003eFinishing:\u003c\/h4\u003e\n\u003cp\u003eThorough cleaning of molded parts with Isopropyl Alcohol may be required prior to staining, painting, or bonding. For suggested cleaning procedures, consult a technical representative.\u003c\/p\u003e\n\u003c\/article\u003e\n\u003cdiv class=\"dividerline\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003carticle class=\"product-properties\"\u003e\n\u003ch3\u003eApplication – Room temperature processing using below variables\u003c\/h3\u003e\n\u003cdiv class=\"product-properties-table\"\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003eUrethane Rubber\u003c\/td\u003e\n\u003ctd\u003eUrethane Resin\u003c\/td\u003e\n\u003ctd\u003eSilicone Rubber\u003c\/td\u003e\n\u003ctd\u003eEpoxy Resin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"even\"\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003ctd\u003eDoes not work\u003c\/td\u003e\n\u003ctd\u003eGood Release\u003c\/td\u003e\n\u003ctd\u003eGood Release\u003c\/td\u003e\n\u003ctd\u003eGood Release\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUrethane Rubber\u003c\/td\u003e\n\u003ctd\u003eGood Release\u003c\/td\u003e\n\u003ctd\u003eGood Release\u003c\/td\u003e\n\u003ctd\u003eGood Release\u003c\/td\u003e\n\u003ctd\u003eDoes not work\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"even\"\u003e\n\u003ctd\u003eSilicone Rubber\u003c\/td\u003e\n\u003ctd\u003eGood Release\u003c\/td\u003e\n\u003ctd\u003eGood Release\u003c\/td\u003e\n\u003ctd\u003eGood Release\u003c\/td\u003e\n\u003ctd\u003eGood Release\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003cdiv class=\"dividerline\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003carticle class=\"product-properties\"\u003e\n\u003ch5\u003eProperties:\u003c\/h5\u003e\n\u003cdiv class=\"product-properties-table\"\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr class=\"singles\"\u003e\n\u003cth\u003eEase Release\u003c\/th\u003e\n\u003cth\u003eWeight\/Gallon\u003c\/th\u003e\n\u003cth\u003eSolvent Carrier\u003c\/th\u003e\n\u003cth\u003eDrying Rate\u003c\/th\u003e\n\u003cth\u003eFlammable\u003c\/th\u003e\n\u003cth\u003eWetting Quality\u003c\/th\u003e\n\u003cth\u003eSafety Data Sheet\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEase Release 500 (aerosol)\u003c\/td\u003e\n\u003ctd\u003e*\u003c\/td\u003e\n\u003ctd\u003eDichloromonofluoroethane, Dimethylmethane Butane\u003c\/td\u003e\n\u003ctd\u003eVery Fast\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eExcellent\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/msds\/files\/72148.PDF\" class=\"product-properties\"\u003eDownload SDS \u003cimg src=\"https:\/\/www.mann-release.com\/images\/pdfdlicon.svg\"\u003e\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e","brand":"Smooth-On","offers":[{"title":"Default Title","offer_id":50043842298171,"sku":"70053","price":20.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/er500-hero.webp?v=1740178266"},{"product_id":"pol-ease®-2450-release-agent-1-5lb","title":"Pol-Ease® 2450 Release Agent 1.5lb","description":"\u003cp\u003e\u003cspan\u003ePol-Ease\u003c\/span\u003e\u003csup\u003e®\u003c\/sup\u003e\u003cspan\u003e 2450 is a solvent and silicone-based release agent. Fast drying, but flammable. For Mold Making: Apply to sealed or non-porous models when making polyurethane rubber molds (not recommended for use with liquid silicones). For Casting: Can be applied to cured polyurethane rubber molds when casting liquid polyurethane. Use of a soft brush to evenly distribute this product or dispense with a Sure Shot Atomizer. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFOR INDUSTRIAL\/PROFESSIONAL USE ONLY. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/polytek.com\/content\/pdf\/SDS\/Polytek_SDS_Pol-Ease-2650_02-10-2015.pdf\" rel=\"noopener\" target=\"_blank\"\u003eSDS\u003c\/a\u003e\u003c\/p\u003e","brand":"Polytek","offers":[{"title":"Default","offer_id":50485888778555,"sku":"2450-1.5","price":38.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/polease2450.png?v=1754599349"},{"product_id":"ultralease-pet-formerly-polyester-parfilm","title":"UltraleasePET Liquid (Formerly Parfilm)","description":"\u003ch2\u003eSemi-Permanent Release Agent\u003c\/h2\u003e\n\u003cp class=\"prod-desc\"\u003eUltralease PET (formerly Polyester Parfilm\u003csup\u003e™\u003c\/sup\u003e) is an industrial semi-permanent mold release that creates a micro-thin parting film for releasing polyester, urethane, and epoxy polymers from a variety of substrates. It also excels in releasing polyethylene, polypropylene and other thermoplastics from metal molds without build-up. UltraleasePET cures quickly with a gloss finish and is effective across a wide temperature range of 50°F – 600°F (10°C - 315°C).\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul class=\"prod-features\"\u003e\n\u003cli\u003eRapid air drying and curing at room temperature, can be further accelerated with heat\u003c\/li\u003e\n\u003cli\u003eHeat stable to 600°F (315°C)\u003c\/li\u003e\n\u003cli\u003eIncreases production efficiency and extends mold life\u003c\/li\u003e\n\u003cli\u003eNO Chlorinated Solvents, NO Class I or Class II Ozone Depleting Substances\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"prod-docs\"\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/tb\/files\/UltraleasePET_TDS.pdf\" target=\"_blank\"\u003eDownload TDS\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/documents\/?doc=all#ultraleasepet\" target=\"_blank\"\u003eDownload SDS\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Price-Driscoll","offers":[{"title":"Liquid Pint","offer_id":50522122977595,"sku":null,"price":21.99,"currency_code":"USD","in_stock":false},{"title":"Liquid Gallon","offer_id":50522123010363,"sku":"74126","price":74.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/UltraleasePET_Grp.png?v=1755650228"},{"product_id":"ultraleasepet-spray-formerly-parfilm","title":"UltraleasePET Spray (Formerly Parfilm)","description":"\u003ch2\u003eSemi-Permanent Release Agent\u003c\/h2\u003e\n\u003cp class=\"prod-desc\"\u003eUltralease PET (formerly Polyester Parfilm\u003csup\u003e™\u003c\/sup\u003e) is an industrial semi-permanent mold release that creates a micro-thin parting film for releasing polyester, urethane, and epoxy polymers from a variety of substrates. It also excels in releasing polyethylene, polypropylene and other thermoplastics from metal molds without build-up. UltraleasePET cures quickly with a gloss finish and is effective across a wide temperature range of 50°F – 600°F (10°C - 315°C).\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul class=\"prod-features\"\u003e\n\u003cli\u003eRapid air drying and curing at room temperature, can be further accelerated with heat\u003c\/li\u003e\n\u003cli\u003eHeat stable to 600°F (315°C)\u003c\/li\u003e\n\u003cli\u003eIncreases production efficiency and extends mold life\u003c\/li\u003e\n\u003cli\u003eNO Chlorinated Solvents, NO Class I or Class II Ozone Depleting Substances\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"prod-docs\"\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/tb\/files\/UltraleasePET_TDS.pdf\" target=\"_blank\"\u003eDownload TDS\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/documents\/?doc=all#ultraleasepet\" target=\"_blank\"\u003eDownload SDS\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Price-Driscoll","offers":[{"title":"12oz Can","offer_id":50884326883643,"sku":null,"price":19.99,"currency_code":"USD","in_stock":true},{"title":"Case of 12 Cans","offer_id":50884327014715,"sku":"070323","price":199.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/UltraleasePET_Grp.png?v=1755650228"},{"product_id":"mr-150-release-agent","title":"MR-150 Release Agent","description":"\u003cp\u003eMR-150 is a Parting Agent used to aid in the de-molding of Silicone and Urethane RTV molds from porous masters made of wood, plaster, or stone. **Use when making multi-part Silicone molds. \u003c\/p\u003e","brand":"Silpak","offers":[{"title":"Default Title","offer_id":51388044509499,"sku":"SPMR150CAN","price":18.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/IMG-1919.jpg?v=1782408433"},{"product_id":"zip-me-301s-release-spray","title":"ZIP ME-301S Release Spray","description":"\u003cp\u003eA silicone-oil free release spray for silicone to silicone applications.\u003c\/p\u003e","brand":"Silpak","offers":[{"title":"Default Title","offer_id":51388237316411,"sku":"AM214","price":34.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/3ACB8F15-3089-436D-8B9D-920F5B97A017.jpg?v=1782409334"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/collections\/easerelease200205.png?v=1703634901","url":"https:\/\/maacaffestore.com\/collections\/release-agents.oembed?page=3","provider":"The Compleat Sculptor, Inc","version":"1.0","type":"link"}