{"title":"Silicone Adhesives","description":"","products":[{"product_id":"smooth-on-skin-tite-4oz-dropper-kit-with-1oz-thi-v","title":"Skin Tite™ 4oz Dropper Kit With 1oz THI-VEX™","description":"\u003cp\u003eSkin Tite® Silicone Adhesive For Creating Skin F\/X is an ACMI rated skin safe silicone used to create fast wounds, scars and skin effect appliances directly to the skin. Cured material is certified by an independent laboratory to ISO 10993-10, Biological evaluation of medical devices, Part 10: Tests for irritation and skin sensitization. It can be sculpted \"on the fly\", offers maximum control and stays precisely where you put it. Skin Tite® will adhere to the skin and perfectly conforms to all contours. Cured rubber is strong and will bend\/flex with body movement. Wounds and appliances will not come off until you remove them.\u003c\/p\u003e\r\n\u003cp\u003eAn infinite variety of color effects are achieved using Silc-Pig® silicone pigments. Blended Silc Pig® color pigments added to Skin Tite® will create hyper-realistic cuts, scars, slash wounds, bruises, necrotic (dead skin) effects, bullet holes and more.\u003c\/p\u003e\r\n\u003cp\u003eThi-vex® thickener will thicken Skin-Tite® for even greater vertical hang control and is ideal for creating skin pockets, hanging skin, deep cuts \u0026amp; wounds, holes and more.\u003c\/p\u003e\r\n\u003cp\u003eBio-Adhesive: Skin Tite® can also be used to adhere skin effects silicone appliances or silicone masks to the skin even when affixed to hard to hold areas such as elbows, fingers and joints. It is ideal for repetitive motion applications. Skin Tite® requires no release agent, even when applying to hair-covered skin surfaces.\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/msds\/files\/BD_DS_Eco_Equ_EZB_EZS_Psy_MS_OOMOO_Reb_ST_SS_Soma_Sol_Sorta.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSkin Tite SDS\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/tb\/files\/Skin_Tite.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSkin Tite TDS\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/tb\/files\/SkinSafeDocs\/SkinTiteSkinSafeCertification032519.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSkin Tite Skin Safety Certification\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/msds\/files\/PlatCat_Silicone_Thinner_SLO-JO_THI-VEX.pdf\" target=\"_blank\" rel=\"noopener\"\u003eTHI-VEX SDS\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/tb\/files\/Thi-Vex.pdf\" target=\"_blank\" rel=\"noopener\"\u003eTHI-VEX TDS\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/tb\/files\/SkinSafeDocs\/Thi-Vex%20Skin%20Safe%20Certification%20081722.pdf\" target=\"_blank\" rel=\"noopener\"\u003eTHI-VEX Skin Safety Certification\u003c\/a\u003e\u003c\/p\u003e","brand":"Smooth-On","offers":[{"title":"Default","offer_id":48014613676347,"sku":"88202","price":15.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/Skin-Tite-and-Thi-Vex-CS-Hand-1400x1050.jpg?v=1754776663"},{"product_id":"sam-32-silicone-art-medium-and-adhesive-3oz-tube","title":"SAM 32 Silicone Art Medium and Adhesive 3oz Tube","description":"\u003ctable style=\"border-collapse: collapse; width: 100%; max-width: 650px; height: 352.8px;\"\u003e\n\u003cthead\u003e\n\u003ctr style=\"background-color: rgb(68, 68, 68); color: rgb(255, 255, 255); text-align: left; height: 19.6px;\"\u003e\n\u003cth style=\"padding: 8px; height: 19.6px;\"\u003eSpecification\u003c\/th\u003e\n\u003cth style=\"padding: 8px; height: 19.6px;\"\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"border: 1px solid rgb(204, 204, 204); padding: 8px; height: 19.6px;\"\u003eProduct Name\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(204, 204, 204); padding: 8px; height: 19.6px;\"\u003eSAM-32 Silicone Adhesive \u0026amp; Paint Base\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"border: 1px solid rgb(204, 204, 204); padding: 8px; height: 19.6px;\"\u003eType\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(204, 204, 204); padding: 8px; height: 19.6px;\"\u003e1-Part Translucent Tin-Cure Silicone (Acetoxy)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"border: 1px solid rgb(204, 204, 204); padding: 8px; height: 19.6px;\"\u003eHardness\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(204, 204, 204); padding: 8px; height: 19.6px;\"\u003e32 Shore A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"border: 1px solid rgb(204, 204, 204); padding: 8px; height: 19.6px;\"\u003eElongation at Break\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(204, 204, 204); padding: 8px; height: 19.6px;\"\u003e350–500% (increases with softener)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"border: 1px solid rgb(204, 204, 204); padding: 8px; height: 19.6px;\"\u003eTack-Free Time\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(204, 204, 204); padding: 8px; height: 19.6px;\"\u003e12 minutes at room temperature\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39.2px;\"\u003e\n\u003ctd style=\"border: 1px solid rgb(204, 204, 204); padding: 8px; height: 39.2px;\"\u003eAir Cure (Thin Layers)\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(204, 204, 204); padding: 8px; height: 39.2px;\"\u003eLess than 1 hour\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"border: 1px solid rgb(204, 204, 204); padding: 8px; height: 19.6px;\"\u003eFull Cure\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(204, 204, 204); padding: 8px; height: 19.6px;\"\u003eOvernight (Optimum: 72 hours)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"border: 1px solid rgb(204, 204, 204); padding: 8px; height: 19.6px;\"\u003eCuring Accelerators\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(204, 204, 204); padding: 8px; height: 19.6px;\"\u003eHeat + moisture (minutes with hair dryer\/water spray)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39.2px;\"\u003e\n\u003ctd style=\"border: 1px solid rgb(204, 204, 204); padding: 8px; height: 39.2px;\"\u003eAdhesion\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(204, 204, 204); padding: 8px; height: 39.2px;\"\u003eExcellent on silicones, foam, fabric, metal, glass, porous surfaces, most plastics\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"border: 1px solid rgb(204, 204, 204); padding: 8px; height: 19.6px;\"\u003ePaint Base\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(204, 204, 204); padding: 8px; height: 19.6px;\"\u003eMix with silicone-safe pigments + silicone + solvent if needed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"border: 1px solid rgb(204, 204, 204); padding: 8px; height: 19.6px;\"\u003eRepair Use\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(204, 204, 204); padding: 8px; height: 19.6px;\"\u003eRapid strength build-up when heated; repairs silicone tears quickly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"border: 1px solid rgb(204, 204, 204); padding: 8px; height: 19.6px;\"\u003eOdor\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(204, 204, 204); padding: 8px; height: 19.6px;\"\u003eStrong vinegar odor (releases acetic acid during cure)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"border: 1px solid rgb(204, 204, 204); padding: 8px; height: 19.6px;\"\u003eStorage\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(204, 204, 204); padding: 8px; height: 19.6px;\"\u003eKeep tightly capped, cool, dry place\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39.2px;\"\u003e\n\u003ctd style=\"border: 1px solid rgb(204, 204, 204); padding: 8px; height: 39.2px;\"\u003eSafety\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(204, 204, 204); padding: 8px; height: 39.2px;\"\u003eCan irritate eyes\/skin; use with ventilation; keep out of children’s reach\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/SAM-32_tech_sheet_2025.pdf?v=1756756617\" target=\"_blank\" title=\"TDS\" rel=\"noopener\"\u003eTDS\u003c\/a\u003e\u003c\/p\u003e","brand":"SAM","offers":[{"title":"Default","offer_id":48014767292731,"sku":"788214202","price":42.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/sam-32.jpg?v=1765638534"},{"product_id":"ge-clear-silicone-caulk-98oz","title":"Clear Silicone Caulk Tube","description":"\u003cp\u003ePRODUCT DETAILS:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eMOMENTIVE PERFORMANCE MATERIALS\u003c\/li\u003e\r\n\u003cli\u003eGE012A 9.8 OZ CLEAR GE SILICONE I WINDOW \u0026amp; DOOR\u003c\/li\u003e\r\n\u003cli\u003e100% Silicone Permanently Waterproof Caulk\u003c\/li\u003e\r\n\u003cli\u003eWithstands All Weather Conditions And Will Remain Permanently Flexible \u0026amp; Shrink\/Crack Proof\u003c\/li\u003e\r\n\u003cli\u003eAdheres To Most Wood, Metal, Vinyl Siding, Drywall\/Plaster, Glass \u0026amp; Plastic\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"GE","offers":[{"title":"Default","offer_id":48014911766843,"sku":"37795687","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/077027000122.jpg?v=1710979731"},{"product_id":"ppi-super-solv-remover-dab-on","title":"Super Solv Remover Dab On","description":"\u003cp\u003eSUPER SOLV - Our strongest and most popular adhesive and prosthetic remover.  Hydrocarbon based, mildly scented, SUPER SOLV provides rapid removal of adhesives and prosthetics without damage to appliances and latex foam.  Excellent for use on delicate lace wigs and skin. Non-oily and not harmful to materials.  Our new Dab-on applicator is perfect for one on one applications.\u003c\/p\u003e","brand":"PPI","offers":[{"title":"Default","offer_id":48014991950139,"sku":"21055D","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/supsolvdab-black-500-medium.jpg?v=1710980229"},{"product_id":"ppi-telesis-silicone-adhesive-remover-4oz","title":"Telesis Silicone Adhesive Remover 4oz","description":"\u003cp\u003eTELESIS SILICONE REMOVER is an incredibly fast-acting solvent, designed to remove Telesis 8 Silicone adhesives.  This new odorless, non-oily formula contains vitamins D, E  and Aloe Vera and will not damage silicone or latex appliances or lace pieces.  Most importantly, it is very gentle on the skin and will not irritate your actors at the end of a long day.  It also works exceptionally well on all the other Telesis 5and Telesis 7 adhesives and thinners.\u003c\/p\u003e","brand":"PPI","offers":[{"title":"Default","offer_id":48014992212283,"sku":null,"price":22.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/telesis-8-remover-web-medium.jpg?v=1710980232"},{"product_id":"silicone-adhesive-neo-strong-bond-50ml","title":"Silicone Adhesive NEO Strong Bond 50ml","description":"\u003cp\u003eThe Silicone Adhesive NEO Strong Bond is a high performance skin adhesive for heavy duty special effect purposes. Its solvent is odorless and provides a pleasant feel. The adhesive does not dry while being applied and doesn‘t form webs on the brush. After a drying time of a few seconds, the pressure sensitive adhesive will remain tacky for hours until it is activated by firmly pressing the prosthetic onto the prepared area. Also available as Silicone Adhesive NEO Regular Bond for regular effect purposes. Both adhesives are easily removable with the Silicone Adhesive NEO Thinner \u0026amp; Remover.\u003c\/p\u003e","brand":"Kryolan","offers":[{"title":"Default","offer_id":48015093301563,"sku":"02055\/00\/0","price":79.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/02055-00-prod-default.png?v=1710981195"},{"product_id":"neo-adhesive-remover-and-thinner-100ml","title":"NEO Adhesive Remover and Thinner 100ml","description":"\u003cp\u003eNEO Adhesive Remover \u0026amp; Thinner is an odorless, skin friendly solvent. It works perfectly for diluting Silicone Adhesive Neo and performs great when removing any skin adhesive.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHazard-determining components of labelling:\u003c\/strong\u003e hexamethyldisiloxane\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHazard statements:\u003c\/strong\u003e \u003cstrong\u003eH400\u003c\/strong\u003e Very toxic to aquatic life. \u003cstrong\u003eH411\u003c\/strong\u003e Toxic to aquatic life with long lasting effects.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrecautionary statements:\u003c\/strong\u003e \u003cstrong\u003eP102\u003c\/strong\u003e Keep out of reach of children. \u003cstrong\u003eP501 \u003c\/strong\u003e Dispose of contents\/container in accordance with local\/regional\/national\/international regulations.\u003c\/p\u003e","brand":"Kryolan","offers":[{"title":"Default","offer_id":48015174631739,"sku":null,"price":16.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/06521-00-prod-default.png?v=1710981864"},{"product_id":"si-tac-textile-adhesive","title":"Si-Tac™ Textile Adhesive","description":"\u003cp\u003e\u003cstrong\u003eSi-Tac\u003c\/strong\u003e™ is a two-part pourable liquid silicone adhesive that is applied to natural or synthetic fabric\/clothing for the purpose of keeping sports or leisure wear in place during exercise. Garments will not shift or fall. \u003cstrong\u003eSi-Tac\u003c\/strong\u003e™ can be mixed and applied by hand, but is also often meter mix dispensed and delivered to the garment surface at strategic points through a narrow static mixing tube before being quickly heat cured. Certified Skin Safe, cured rubber is soft, comfortable and flexes with every movement; never noticed by the wearer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSi-Tac\u003c\/strong\u003e™ silicone performs over a wide temperature range, is very strong, sweat resistant and lasts through many laundering cycles.\u003c\/p\u003e\n\u003cp\u003e\u003cimg height=\"405\" width=\"362\" alt=\"\" src=\"https:\/\/cdn.shoplightspeed.com\/shops\/606431\/files\/51176739\/sitac.png\"\u003e\u003c\/p\u003e\n\u003cp\u003eInstructions\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eSafety \u003c\/strong\u003e\u003c\/em\u003e- Use in a properly ventilated area (“room size” ventilation). Wear safety glasses, long sleeves and rubber gloves to minimize contamination risk. Wear vinyl gloves only. Latex gloves will inhibit the cure of the rubber. Store and use material at room temperature (73°F\/23°C). Warmer temperatures will drastically reduce working time and cure time. Storing material at warmer temperatures will also reduce the usable shelf life of unused material. These products have a limited shelf life and should be used as soon as possible.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eCure Inhibition \u003c\/strong\u003e\u003c\/em\u003e- Addition cured silicone rubber may be inhibited by certain surface contaminants. If surface compatibility is in question, do a small compatibility test before using for an important project.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eMEASURING \u0026amp; MIXING...\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eMixing by Hand\u003c\/strong\u003e\u003c\/em\u003e - Before you begin, pre-mix Part B thoroughly. After dispensing required amounts of Parts A and B into mixing container (1A:1B by volume or weight), mix thoroughly by hand or using a turbine mixer (available at your local Smooth-On distributor). Material should be mixed for 3 minutes before pouring, making sure that you scrape the sides and bottom of the mixing container several times.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eAPPLYING \u0026amp; CURING...\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eApplying by Hand\u003c\/strong\u003e\u003c\/em\u003e - Apply a uniform layer across all surfaces using a scraper tool or brush. If applying in layers (approximately 0.06” \/ 1.5mm per layer), let the first coat cure for 3 hours at room temperature until material becomes “tacky” before adding the next coat. Repeat until the necessary thickness is achieved.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eMeter Mix Dispensing\u003c\/strong\u003e\u003c\/em\u003e - \u003cstrong\u003eSi-Tac™\u003c\/strong\u003e Parts A and B are meter mix dispensed and delivered to the garment surface at strategic points through a narrow static mixing tube. The garment is then run through a heat tunnel and exposed to 200°F \/ 94°C or higher so that the silicone cures in 1 minute or less. For information on meter mix equipment, contact Smooth-On or your nearest Smooth-On distributor.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eCuring\u003c\/strong\u003e\u003c\/em\u003e - Let silicone cure 6 hours at 73°F \/ 23°C.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eHeat Curing \u003c\/strong\u003e\u003c\/em\u003e- Cure time can be reduced to under 1 minute by applying heat (200°F \/ 94°C).\u003c\/p\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" href=\"https:\/\/www.smooth-on.com\/msds\/files\/SI-TAC%20SILICONE%20TEXTILE%20ADHESIVE_A_2_B_2%20SDS.pdf\" target=\"_blank\"\u003eSDS\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" href=\"https:\/\/www.smooth-on.com\/tb\/files\/SkinSafeDocs\/SI-TacSiliconeAdhesiveSkinSafeCertification.pdf\" target=\"_blank\"\u003eSkin Safety Certification\u003c\/a\u003e\u003c\/p\u003e","brand":"Smooth-On","offers":[{"title":"Trial Kit (2 lbs. \/ 0.91 kg.)","offer_id":48015707603259,"sku":"","price":44.99,"currency_code":"USD","in_stock":false},{"title":"2 Gallon Kit (16 lbs. \/ 7.26 kg.)","offer_id":48015707636027,"sku":null,"price":339.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/Si-Tac-combo-1400x1050.jpg?v=1755212535"},{"product_id":"silabond-series","title":"Silabond Series","description":"\u003cp\u003e\u003cem\u003e“Silabond Adhesive is as close to 355 Adhesive from the good old days as you can get. It gives me time to place a piece, be it foam or silicone, without flashing off too quickly, and once it’s down, it stays down all day. It’s a glue I use on every show I Dept. Head on. I dig it!”\u003cbr\u003e\u003c\/em\u003e\u003cstrong\u003eHoward Berger, Makeup Dept. Head, KNB EFX Group\u003c\/strong\u003e\u003cem\u003e\u003cbr\u003e\u003c\/em\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eDESCRIPTION\u003cbr\u003e\u003c\/strong\u003eSilabond is a silicone based pressure sensitive (PS) adhesive designed to provide superior hold and performance under any conditions. It works especially well with silicone appliances, hair, foam, latex, plastic and rubber. Silabond silicone prosthetic adhesive is nearly odorless making application comfortable for both the makeup artist and model\/actor. Our exclusive formula uses only FDA approved ingredients and is completely free of ethyl acetate, heptane or skin irritants. Silabond uses the fastest evaporating solvents approved for skin use yet it provides enough time to position the appliance in place. Silabond is the favorite silicone prosthetic adhesive of Howard Berger and pro makeup artists in the film and TV industry.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eSILABOND ADVATANTAGE\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eWater and perspiration resistant\u003c\/li\u003e\r\n\u003cli\u003ePressure sensitive (PS)\u003c\/li\u003e\r\n\u003cli\u003eStrong and fast bond\u003c\/li\u003e\r\n\u003cli\u003eSkin safe and odorless\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eREMOVAL\u003cbr\u003e\u003c\/strong\u003eSilabond silicone prosthetic adhesive removes effortlessly, fast and without irritation when EBA \u003cstrong\u003eVapore Makeup Remover\u003c\/strong\u003e is used.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eAPPLICATION \u0026amp; INSTRUCTIONS\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003col\u003e\r\n\u003cli\u003ePour only the needed amount of Silabond into a small cup. Add more as necessary. In order to avoid product evaporation and cross contamination from one person to another, do not use Silabond directly from the original container provided by EBA.\u003c\/li\u003e\r\n\u003cli\u003eIt is highly recommended to use Silabond along with \u003cstrong\u003eSB Thinner\u003c\/strong\u003e in order to thin down the adhesive to a desired working level and replenish any solvents that may evaporate during the application.\u003c\/li\u003e\r\n\u003cli\u003eNext, make sure surfaces are completely clean. Apply Silabond in thin layers onto both surfaces to be adhered.\u003c\/li\u003e\r\n\u003cli\u003eLastly, press the surfaces together firmly. IMPORTANT: To achieve proper bond and performance it is essential to let the solvents evaporate completely from the surfaces before pressing the two surfaces together. This typically takes only a minute or less pending the amount of adhesive.\u003c\/li\u003e\r\n\u003c\/ol\u003e\r\n\u003cp\u003e\u003cstrong\u003eHint:\u003c\/strong\u003e The adhesive becomes tackier as the solvents evaporate. The longer you give it the better bond will be achieved. Do not adhere surfaces if the adhesive is feeling wet.  Do not apply too much adhesive, brushing in thin layers is highly recommended.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eSilicone Adhesive Thinner\u003cbr\u003eAdd Thinner to Silabond adhesive at 10:1 ratio (Silabond:Thinner) or as desired. Adding SB Thinner to Silabond will reduce drying time.\u003c\/strong\u003e\u003c\/p\u003e","brand":"European Body Art","offers":[{"title":"Adhesive 2oz","offer_id":48015708422459,"sku":null,"price":54.0,"currency_code":"USD","in_stock":false},{"title":"Thinner 2oz","offer_id":48015708455227,"sku":null,"price":22.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/silabondcombo.png?v=1713996792"},{"product_id":"skin-tite","title":"Skin Tite™","description":"\u003cp\u003e\u003cstrong\u003eSkin Tite™\u003c\/strong\u003e is a skin safe silicone used to create fast wounds, scars and to adhere silicone appliances directly to the skin. It can be sculpted “on the fly”, offers maximum control and stays precisely where you put it. \u003cstrong\u003eSkin Tite™\u003c\/strong\u003e will adhere to the skin and perfectly conforms to all contours. Cured rubber is strong and will flex with body movement. Wounds and appliances will not come off until you remove them. Material is skin safe and certified by an independent laboratory.\u003c\/p\u003e\r\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shoplightspeed.com\/shops\/606431\/files\/52082668\/skintitespecs.png\" alt=\"\" width=\"498\" height=\"408\"\u003e\u003c\/p\u003e\r\n\u003cp\u003eAn infinite variety of color effects are achieved using \u003cstrong\u003eSilc Pig™ \u003c\/strong\u003esilicone pigments. Blended \u003cstrong\u003eSilc Pig™\u003c\/strong\u003e color pigments added to \u003cstrong\u003eSkin Tite™\u003c\/strong\u003e will create hyper-realistic cuts, scars, slash wounds, bruises, necrotic (dead skin) effects, bullet holes and more. \u003cstrong\u003eTHI-VEX™\u003c\/strong\u003e thickener will thicken \u003cstrong\u003eSkin Tite™\u003c\/strong\u003e for even greater vertical hang control and is ideal for creating skin pockets, hanging skin, deep cuts \u0026amp; wounds, holes and more.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eBio-Adhesive:\u003c\/strong\u003e \u003cstrong\u003eSkin Tite™\u003c\/strong\u003e can also be used to adhere skin effects silicone appliances or silicone masks to the skin even when affixed to hard to hold areas such as elbows, fingers and joints. It is ideal for repetitive motion applications. \u003cstrong\u003eSkin Tite™\u003c\/strong\u003e will release from closely cropped hair-covered skin surfaces (short arm hair, beards, moustaches and eyebrows). \u003c\/p\u003e\r\n\u003cp\u003eInstructions\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eStore and use all products at room temperature (72° F \/ 22°C).\u003c\/strong\u003e This product has a limited shelf life and should be used as soon as possible.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eWe recommend that you do a small scale test on the back of your hand to ensure that you have no allergic reaction to silicone.\u003c\/strong\u003e If you notice any type of skin reaction, do not use product.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eImportant: \u003c\/strong\u003eWarmer temperatures will reduce pot life and accelerate the cure time of \u003cstrong\u003eSkin Tite™\u003c\/strong\u003e.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eSkin Tite™\u003c\/strong\u003e is a platinum-cure silicone. Platinum-cure silicone rubber may be inhibited by certain contaminants such as latex, skin oils, aloe vera, sulfur based clays, urethane rubber and tin-cured silicone rubber resulting in tackiness at the mold interface or a total lack of cure throughout the piece. If compatibility between the rubber and a surface is a concern, a small-scale test is recommended.Inhibition has occurred if the rubber remains uncured after the recommended cure time has passed.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eBecause no two applications are quite the same, a small test application to determine suitability for your project is recommended if performance of this material is in question.\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eAdding Color\u003c\/em\u003e -\u003c\/strong\u003e \u003cstrong\u003eSilc Pig™\u003c\/strong\u003e silicone pigments can added and mixed thoroughly into \u003cstrong\u003eSkin Tite™\u003c\/strong\u003e for matching a skin color, etc.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eMixing \u003c\/em\u003e-\u003c\/strong\u003e \u003cstrong\u003eSkin Tite™\u003c\/strong\u003e can be hand mixed. Aggressively hand mix for 30 seconds, making sure that you scrape the sides and bottom of your mixing container several times.\u003c\/p\u003e\r\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003e1. Using As A Bio-Adhesive\u003c\/strong\u003e\u003c\/em\u003e - \u003cstrong\u003eSkin Tite™\u003c\/strong\u003e can be used to temporarily adhere a previously made platinum silicone prosthetic appliance to human skin.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eHere’s How To Do It:\u003c\/strong\u003e Clean the skin to remove any oils which may affect the curing of the \u003cstrong\u003eSkin Tite™\u003c\/strong\u003e adhesive. Mix the \u003cstrong\u003eSkin Tite™\u003c\/strong\u003e thoroughly (1A:1B). After mixing, brush a small amount of \u003cstrong\u003eSkin Tite™\u003c\/strong\u003e onto the appliance or surface of the skin. Hold the appliance to the skin until the \u003cstrong\u003eSkin Tite™\u003c\/strong\u003e is cured. This should occur in approximately 5 minutes or less, dependant on body temperature. A higher temperature will cause the \u003cstrong\u003eSkin Tite™\u003c\/strong\u003e to cure faster. Once the \u003cstrong\u003eSkin Tite™\u003c\/strong\u003e is cured, it will remain tacky. Use a small amount of \u003cstrong\u003eSkin Tite™\u003c\/strong\u003e to carefully blend the edges of the appliance if needed. After \u003cstrong\u003eSkin Tite™\u003c\/strong\u003e is fully cured, theatrical makeup can be used to further blend and color the piece. To remove the appliance from the skin, slowly peel the piece away from the skin. Using baby oil or make-up remover can assist in removal.\u003c\/p\u003e\r\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003e2. Using To Make Appliances Directly On The Skin\u003c\/strong\u003e \u003c\/em\u003e- \u003cstrong\u003eSkin Tite™\u003c\/strong\u003e can be combined with \u003cstrong\u003eSilc-Pig™\u003c\/strong\u003e silicone pigments and a small amount of \u003cstrong\u003eTHI-VEX™\u003c\/strong\u003e thixotropic additive to create on skin silicone appliances.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eHere’s How To Do It: \u003c\/strong\u003eMix the \u003cstrong\u003eSkin Tite™\u003c\/strong\u003e 1A:1B by weight or volume as normal, add a small amount of pigment and mix again. After the desired color is achieved, add a small amount of \u003cstrong\u003eTHI-VEX™\u003c\/strong\u003e and continue mixing until the desired thickness is achieved. The \u003cstrong\u003eSkin Tite™\u003c\/strong\u003e can now be applied directly to the skin to create scars, cuts, and other appliances. Use a small brush dipped in alcohol to feather the edges of the appliance. After the appliance is fully cured, theatrical makeup can be used to further blend and color the piece. To remove the appliance from the skin, slowly peel the piece away from the skin. Using baby oil or make-up remover can assist in removal.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eHair Covered Skin Surfaces\u003c\/strong\u003e - \u003cstrong\u003eSkin Tite™\u003c\/strong\u003e will release from closely cropped hair-covered skin surfaces (short arm hair, beards, moustaches and eyebrows). If hair is too long, it will become encapsulated in rubber and careful cutting of the hair may be necessary to remove.\u003c\/p\u003e\r\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003e3. Using Skin Tite™ To Cast Into A Mold To Make An Appliance\u003c\/strong\u003e\u003c\/em\u003e - \u003cstrong\u003eSkin Tite™\u003c\/strong\u003e can be combined with \u003cstrong\u003eSilc-Pig™\u003c\/strong\u003e silicone pigments and poured into a mold which will create a re-useable silicone appliance.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eHere’s How To Do It:\u003c\/strong\u003e You can cast \u003cstrong\u003eSkin Tite™\u003c\/strong\u003e into either a platinum silicone mold or a rigid plaster mold. Apply a soap solution (1 part dish soap to 2 parts isopropyl alcohol works well) as a mold release and let dry at least 30 minutes. Mix \u003cstrong\u003eSkin Tite™\u003c\/strong\u003e 1A:1B by weight or volume and cast into the mold. After the casting is fully cured, the mold release should be washed off with warm water and allowed to dry. \u003cstrong\u003eSkin Tite™\u003c\/strong\u003e can be used to temporarily adhere the piece to the skin. Theatrical makeup can be used to further blend and color the piece. After use, remove the piece slowly. Using baby oil or makeup remover can assist in removal.\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/msds\/files\/BD_DS_Eco_Equ_EZB_EZS_Psy_MS_OOMOO_Reb_ST_SS_Soma_Sol_Sorta.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSDS\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/tb\/files\/Skin_Tite.pdf\" target=\"_blank\" rel=\"noopener\"\u003eTDS\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/tb\/files\/SkinSafeDocs\/SkinTiteSkinSafeCertification032519.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSkin Safety Certification\u003c\/a\u003e\u003c\/p\u003e","brand":"Smooth-On","offers":[{"title":"8oz Kit (0.5 lbs. \/ 0.23 kg.)","offer_id":48015740371259,"sku":"88222","price":25.99,"currency_code":"USD","in_stock":false},{"title":"Pint Kit (2 lbs. \/ 0.91 kg.)","offer_id":48015740404027,"sku":"88244","price":50.99,"currency_code":"USD","in_stock":false},{"title":"2 Gallon Kit (16 lbs. \/ 7.26 kg.)","offer_id":48015740436795,"sku":"88261","price":346.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/Skin-Tite-combo-1400x1050_4cb27735-faf5-4629-9ae0-1dce92ee9a82.jpg?v=1754776750"},{"product_id":"sil-poxy-silicone-adhesive","title":"Sil-Poxy™ Silicone Adhesive","description":"\u003cp\u003e\u003cstrong\u003eSil-Poxy™\u003c\/strong\u003e is a one component adhesive made specifically for bonding Smooth-On RTV moldmaking silicone rubbers to silicone rubber and other substrates including some plastics (urethane), plasters\/ceramics, fabrics, etc.\u003cbr\u003e\u003cstrong\u003eSil-Poxy™\u003c\/strong\u003e will work with Smooth-On tin or platinum cure moldmaking silicones and provides a strong, flexible bond between silicone parts with high elongation. Can be colored with \u003cstrong\u003eSilc-Pig™\u003c\/strong\u003e silicone pigments. Cured adhesive resists weathering, moisture, UV and high temperatures. \u003cstrong\u003eSil-Poxy™\u003c\/strong\u003e can be used repairing torn silicone rubber molds. Other applications include bonding silicone for prosthetics and animatronics.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCured\u003c\/strong\u003e \u003cstrong\u003eSil-Poxy™\u003c\/strong\u003e is certified skin safe. \u003cstrong\u003eIMPORTANT - Do not apply to skin in liquid form.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg src=\"https:\/\/cdn.shoplightspeed.com\/shops\/606431\/files\/52780185\/silpoxyspecs.png\" alt=\"\" width=\"406\" height=\"565\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFeatures\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCan be used repairing torn silicone rubber molds.\u003c\/li\u003e\n\u003cli\u003eWill work with tin- or platinum-cure silicones\u003c\/li\u003e\n\u003cli\u003eProvides a strong, flexible bond\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eInstructions\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eSafety \u003c\/em\u003e- \u003c\/strong\u003eUse in a properly ventilated area (“room size” ventilation). Wear safety glasses, long sleeves and rubber gloves to minimize contamination risk.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStore and use material at room temperature (73°F\/23°C).\u003c\/strong\u003e This product has a limited shelf life and should be used as soon as possible.\u003c\/p\u003e\n\u003cp\u003eA clean, dry surface is essential for successful adhesive bonding. If possible, abrade surface and follow with solvent wipe before applying.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBecause no two applications are quite the same, a small test application to determine suitability for your project is recommended if performance of this material is in question. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eDispensing \u003c\/em\u003e- \u003c\/strong\u003eSqueeze tube, taking care not allow air to enter tube before replacing cap. Unused product in tube exposed to air will cure quickly. Replace cap immediately after dispensing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eApplying \u003c\/em\u003e-\u003c\/strong\u003e Apply adhesive to surface and mate parts. Material will begin to cure in about 5 minutes. Pieces can be handled after 1 hour depending on temperature and humidity. Full cure is attained after 24 hours.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eClean Up - \u003c\/strong\u003e\u003c\/em\u003eUncured \u003cstrong\u003eSil-Poxy™\u003c\/strong\u003e can be removed from surfaces using isopropyl alcohol. Do not allow isopropyl alcohol to pool on silicone rubber surfaces.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/msds\/files\/Sil-Poxy.pdf\" rel=\"noopener\" target=\"_blank\"\u003eSDS\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/tb\/files\/Sil_Poxy_Silicone_Adhesive.pdf\" rel=\"noopener\" target=\"_blank\"\u003eTDS\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/tb\/files\/SkinSafeDocs\/Sil-PoxySkinSafeCertification071219.pdf\" rel=\"noopener\" target=\"_blank\"\u003eSkin Safety Certification\u003c\/a\u003e\u003c\/p\u003e","brand":"Smooth-On","offers":[{"title":"0.5oz Tube (0.03 lbs. \/ 0.01 kg.)","offer_id":48015763505467,"sku":"95342","price":14.99,"currency_code":"USD","in_stock":false},{"title":"3oz Tube (0.19 lbs. \/ 0.09 kg.)","offer_id":48015763538235,"sku":"95310A","price":34.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/Sil-Poxy-hand-tube-1400x1050.jpg?v=1755212224"},{"product_id":"derma-tac™-1oz","title":"Derma-tac™ Adhesive","description":"\u003cp\u003e\u003cstrong\u003eDerma-tac™\u003c\/strong\u003e silicone prosthetic adhesive is a pressure sensitive adhesive designed for temporarily adhering silicone and latex makeup prosthetic appliances to the skin.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDerma-tac™\u003c\/strong\u003e is skin safe and certified by an independent laboratory. This is a low odor formulation which is cosmetic grade and non-irritating.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: \u003c\/strong\u003eIf adhering appliances created without a cap plastic membrane and made using \u003cstrong\u003eEcoflex™\u003c\/strong\u003e silicone, using \u003cstrong\u003eSkin Tite™\u003c\/strong\u003e skin safe silicone adhesive will produce a better bond.\u003c\/p\u003e","brand":"Smooth-On","offers":[{"title":"1oz","offer_id":49801515991355,"sku":"106722","price":19.99,"currency_code":"USD","in_stock":false},{"title":"4oz","offer_id":49801516024123,"sku":"106732","price":64.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/derma-tac-adhesive-combo-1400x1050.jpg?v=1748699875"},{"product_id":"derma-tac™-remover-4oz","title":"Derma-tac™ Remover","description":"\u003cdiv class=\"value\"\u003e\n\u003cp\u003eApply Derma-tac™ Remover using a cotton swab, cotton ball or suitable makeup brush. Work the Derma-tac™ remover under the edges of the appliance and onto the skin. work the appliance away from the skin slowly, taking particular care around the eyes, nose and mouth. Once the Derma-tac™ has been removed, the skin should be cleaned and moisturized using a cosmetic cleanser and moisturizer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUse to remove Derma-tac™ prosthetic adhesive\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Smooth-On","offers":[{"title":"4oz","offer_id":49801501802811,"sku":"106822","price":7.99,"currency_code":"USD","in_stock":true},{"title":"16oz","offer_id":49801501835579,"sku":"106842","price":23.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/derma-tac-remover-combo-1400x1050.jpg?v=1748699936"},{"product_id":"si-tac™-ii","title":"Si-Tac™ II","description":"\u003cdiv class=\"info\"\u003e\n\u003cp\u003eSi-Tac™ II is a skin-safe silicone adhesive applied to natural or synthetic fabrics for the purpose of holding garments in place during normal wear or heavy exercise. It features exceptional adhesive properties, very high tensile strength and wear resistance. Withstands repeated laundering. Si-Tac II can be hand mixed, mechanically mixed and applied or dispensed through meter-mix equipment in production.\u003c\/p\u003e\n\u003ch2\u003eTechnical Data\u003c\/h2\u003e\n\u003ch3 class=\"primary-trim\"\u003eData At-A-Glance\u003c\/h3\u003e\n\u003ctable id=\"specs-table\"\u003e\n\u003ctbody\u003e\n\u003ctr class=\"primary-trim\"\u003e\n\u003ctd class=\"spec-label\"\u003e\u003cspan class=\"bold-label\"\u003ePot Life\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e6 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"primary-trim\"\u003e\n\u003ctd class=\"spec-label\"\u003e\u003cspan class=\"bold-label\"\u003eCure Time @ 180 °F \/ 82 °C\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e5 minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"primary-trim\"\u003e\n\u003ctd class=\"spec-label\"\u003e\u003cspan class=\"bold-label\"\u003eCure Time @ 250 °F \/ 121 °C\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e20 seconds\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"primary-trim\"\u003e\n\u003ctd class=\"spec-label\"\u003e\u003cspan class=\"bold-label\"\u003eMix Ratio By Volume\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e1A:1B\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"primary-trim\"\u003e\n\u003ctd class=\"spec-label\"\u003e\u003cspan class=\"bold-label\"\u003eMix Ratio By Weight\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e1A:1B\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"primary-trim\"\u003e\n\u003ctd class=\"spec-label\"\u003e\u003cspan class=\"bold-label\"\u003eColor\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003eTranslucent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"primary-trim\"\u003e\n\u003ctd class=\"spec-label\"\u003e\u003cspan class=\"bold-label\"\u003eSpecific Gravity\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e1.1 g\/cc\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"primary-trim\"\u003e\n\u003ctd class=\"spec-label\"\u003e\u003cspan class=\"bold-label\"\u003eShore Hardness\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e30 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"primary-trim\"\u003e\n\u003ctd class=\"spec-label\"\u003e\u003cspan class=\"bold-label\"\u003eElongation @ Break\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e750 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"primary-trim\"\u003e\n\u003ctd class=\"spec-label\"\u003e\u003cspan class=\"bold-label\"\u003eTensile Strength\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e900 psi\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"primary-trim\"\u003e\n\u003ctd class=\"spec-label\"\u003e\u003cspan class=\"bold-label\"\u003eDie B Tear Strength\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e220 pli\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"primary-trim\"\u003e\n\u003ctd class=\"spec-label\"\u003e\u003cspan class=\"bold-label\"\u003eUseful Temperature (min)\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e-65 °F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"primary-trim\"\u003e\n\u003ctd class=\"spec-label\"\u003e\u003cspan class=\"bold-label\"\u003eUseful Temperature (max)\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e450 °F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"primary-trim\"\u003e\n\u003ctd class=\"spec-label\"\u003e\u003cspan class=\"bold-label\"\u003eMixed Viscosity\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e350,000 cps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"features\"\u003e\n\u003ca name=\"features\"\u003e\u003c\/a\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBonds to Activewear\/Shapewear Fabrics Including Nylon, Spandex™ \u0026amp; Lycra™\u003c\/li\u003e\n\u003cli\u003eStrongest, Longest Lasting Garment Adhesive Available Anywhere\u003c\/li\u003e\n\u003cli\u003eWaterproof, Sweatproof and Wear Resistant\u003c\/li\u003e\n\u003cli\u003eNo-Slip Formula to Hold Garments in Place\u003c\/li\u003e\n\u003cli\u003eMoves Comfortably with the Body\u003c\/li\u003e\n\u003cli\u003eRemains Flexible at -65°F to 450°F (-53°C to 232°C)\u003c\/li\u003e\n\u003cli\u003eCertified Skin-Safe\u003c\/li\u003e\n\u003cli\u003eResists UV, Ozone and Pool Chlorine\u003c\/li\u003e\n\u003cli\u003eWithstands Hundreds of Laundry Cycles\u003c\/li\u003e\n\u003cli\u003eCustom Colors Available\u003c\/li\u003e\n\u003cli\u003eEco-friendly - Vegan and No VOCs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"instructions\"\u003e\n\u003ca name=\"instructions\"\u003e\u003c\/a\u003e\n\u003ch2\u003eInstructions\u003c\/h2\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003ePREPARATION...\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eSafety -\u003c\/strong\u003e\u003c\/em\u003e Use in a properly ventilated area (“room size” ventilation). Wear safety glasses, long sleeves and gloves to minimize contamination risk. Wear vinyl gloves only. Latex gloves will inhibit the cure of the rubber. Store and use material at room temperature 73°F (23°C). Warmer temperatures will drastically reduce working time and cure time. Storing material at warmer temperatures will also reduce the usable shelf life of unused material. This product has a limited shelf life and should be used as soon as possible.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eCure Inhibition - \u003c\/strong\u003e\u003c\/em\u003eAddition cured silicone rubber may be inhibited by certain surface contaminants. If surface compatibility is in question, do a small compatibility test before using for an important project.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eMIXING \u0026amp; CURING...\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eMix by Hand -\u003c\/strong\u003e\u003c\/em\u003e Dispense equal amounts of Part A and Part B into a mixing container. Mix thoroughly for at least 5 minutes using a flat edge mixing paddle. Scrape sides and bottom of mixing container several times using flat edge of paddle. Vacuum Degas - place mixing container in vacuum chamber and subject mixture to 29 inHg vacuum until mixture rises and falls. Remove from vacuum chamber and apply. Heat cure as directed below.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eMechanical Mixing - \u003c\/strong\u003e\u003c\/em\u003eDispense equal amounts of Part A and Part B into a mixing container. Using a drill with attached mechanical mixer (such as a Turbine Mixer), mix thoroughly for at least 3 minutes on medium speed. Avoid high speeds and creating a vortex as this will entrain air into the silicone. Follow with 2 minutes of hand mixing using a flat edge mixing paddle. Scrape sides and bottom of mixing container several times. Vacuum Degas - place mixing container in vacuum chamber and subject mixture to 29 inHg vacuum until mixture rises and falls. Remove from vacuum chamber and apply. Heat cure as directed below.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eMeter Mix Dispensing - \u003c\/strong\u003e\u003c\/em\u003eWhen meter mix dispensing, contact meter mix equipment manufacturer for instructions on proper equipment setup and usage.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eHeat Curing -\u003c\/strong\u003e\u003c\/em\u003e Si-Tac II must be heat cured to achieve optimal properties. Standard Cure: 20 seconds at 250°F (121°C). Alternatively, it can be cured at 180°F (82°C) for 5 minutes.\u003c\/p\u003e\n\u003cp\u003eCure times may vary slightly depending on part thickness, substrate, and oven performance. If the fabric or bonded assembly is at room temperature when entering the oven, a longer post-cure may be necessary to ensure a full cure throughout.\u003c\/p\u003e\n\u003cul class=\"docslist\"\u003e\n\u003cli\u003e\n\u003ch3\u003eTechnical and Related Documents\u003c\/h3\u003e\n\u003cdiv\u003e\u003ca class=\"primary-trim\" href=\"https:\/\/www.smooth-on.com\/tb\/files\/SI-TAC%20II_TB.pdf\" target=\"_blank\"\u003eTechnical Bulletin\u003c\/a\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch3\u003eSafety Data Sheets\u003c\/h3\u003e\n\u003cdiv data-reg=\"US\" data-lang=\"EN\"\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/documents\/?doc=all#si-tac-ii\" target=\"_blank\"\u003eSi-Tac II SDS \u003cspan class=\"sdslang\"\u003e| English\u003c\/span\u003e\u003c\/a\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Smooth-On","offers":[{"title":"Trial Kit (2 lbs. \/ 0.91 kg.)","offer_id":50442063380795,"sku":"142144","price":36.99,"currency_code":"USD","in_stock":false},{"title":"2 Gallon Kit (16 lbs. \/ 7.26 kg.)","offer_id":50442063413563,"sku":"142161","price":216.99,"currency_code":"USD","in_stock":false},{"title":"10 Gallon Kit (80 lbs. \/ 36.29 kg.)","offer_id":50442063446331,"sku":"142171","price":1022.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/Si-Tac-II-combo-1400x1050.jpg?v=1752788167"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/collections\/smooth-on-sil-poxy-silicone-adhesive.jpg?v=1710044037","url":"https:\/\/maacaffestore.com\/collections\/silicone-adhesives.oembed","provider":"The Compleat Sculptor, Inc","version":"1.0","type":"link"}