{"title":"Soft Casting Silicones","description":"","products":[{"product_id":"dragon-skin-fx-pro","title":"Dragon Skin™ FX‑ Pro™","description":"\u003cp\u003e\u003cstrong\u003eDragon Skin™ FX-Pro™\u003c\/strong\u003e is a soft, stable, high performance platinum silicone rubber specifically designed for creating silicone makeup appliances and skin effects. \u003cstrong\u003eDragon Skin™ FX-Pro™\u003c\/strong\u003e is compatible with \u003cstrong\u003eSkin-Tite™\u003c\/strong\u003e silicone adhesive as well as medical grade pressure sensitive adhesives for adhering silicone appliances temporarily to the skin. Soft and stretchy \u003cstrong\u003eFX-Pro™\u003c\/strong\u003e has a Shore hardness of 2A. \u003cstrong\u003eFX-Pro™ \u003c\/strong\u003ecan be combined with \u003cstrong\u003eSLACKER™\u003c\/strong\u003e deadening agent to create a very soft silicone gel for filling encapsulated silicone pieces. An infinite number of color effects can be achieved by adding \u003cstrong\u003eSilc-Pig™\u003c\/strong\u003e silicone pigments. Cured rubber can also be painted with the \u003cstrong\u003ePsycho Paint™\u003c\/strong\u003e system.\u003c\/p\u003e\r\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shoplightspeed.com\/shops\/606431\/files\/50853708\/dragonskinfxprospecs.png\" alt=\"\" width=\"405\" height=\"657\"\u003e\u003c\/p\u003e\r\n\u003cp\u003eFeatures\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\n\u003cstrong\u003eSoft\u003c\/strong\u003e - Shore 2A hardness allows for softer appliances using less \u003cstrong\u003eSLACKER™\u003c\/strong\u003e deadening agent\u003c\/li\u003e\r\n\u003cli\u003e\n\u003cstrong\u003eLow Viscosity\u003c\/strong\u003e - combined with long working time reduces bubbles and makes pouring easier\u003c\/li\u003e\r\n\u003cli\u003e\n\u003cstrong\u003eCures Dry\u003c\/strong\u003e - will not leach silicone fluid\u003c\/li\u003e\r\n\u003cli\u003e\n\u003cstrong\u003eLong Working Time\u003c\/strong\u003e - 10-12 minute working time is good for larger pours or injections\u003c\/li\u003e\r\n\u003cli\u003e\n\u003cstrong\u003eFast Cure\u003c\/strong\u003e - 40 minute cure time allows for quick turnaround of castings or molds\u003c\/li\u003e\r\n\u003cli\u003e\n\u003cstrong\u003eMore Workable\u003c\/strong\u003e - Do More - has a ‘gel’ stage - slushing the material into prosthetic molds is easier\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003eInstructions Measuring \u0026amp; Mixing\u003c\/p\u003e\r\n\u003cp\u003eBefore you begin, pre-mix Part B thoroughly. After dispensing required amounts of Parts A and B into mixing container (1A:1B by volume or weight), mix thoroughly making sure that you scrape the sides and bottom of the mixing container several times.\u003c\/p\u003e\r\n\u003cp\u003ePouring\u003c\/p\u003e\r\n\u003cp\u003eFor best results, pour your mixture in a single spot at the lowest point of the containment field. Let the rubber seek its own level. A uniform flow will help minimize entrapped air. If using as a mold material, the liquid rubber should level off at least 1\/2” (1.3 cm) over the highest point of the model surface.\u003c\/p\u003e\r\n\u003cp\u003eCuring\u003c\/p\u003e\r\n\u003cp\u003eAllow rubber to cure for 40 minutes at room temperature (73°F \/ 23°C) before demolding. Time to demold can be reduced with mild heat or by adding an appropriate amount of \u003cstrong\u003ePlat-Cat™\u003c\/strong\u003e cure accelerator (See \u003cstrong\u003ePlat-Cat™\u003c\/strong\u003e technical bulletin available at www.smooth-on.com for details). The pot life and cure times can be extended using \u003cstrong\u003eSlo-Jo™\u003c\/strong\u003e cure retarder (see \u003cstrong\u003eSlo-Jo™\u003c\/strong\u003e technical bulletin available at www.smooth-on.com for details). Do not cure rubber where temperature is less than 65°F \/ 18°C.\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/msds\/files\/BD_DS_Eco_Equ_EZB_EZS_Psy_MS_OOMOO_Reb_ST_SS_Soma_Sol_Sorta.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSDS\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/tb\/files\/SkinSafeDocs\/DragonSkinFX-ProSkinSafeCertification071519.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSkin Safety Certification\u003c\/a\u003e\u003c\/p\u003e","brand":"Smooth-On","offers":[{"title":"Trial Kit (2 lbs. \/ 0.91 kg.)","offer_id":48014280786235,"sku":"28744","price":40.99,"currency_code":"USD","in_stock":true},{"title":"2 Gallon Kit (16 lbs. \/ 7.26 kg.)","offer_id":48014280819003,"sku":"28761","price":248.99,"currency_code":"USD","in_stock":true},{"title":"10 Gallon Kit (80 lbs. \/ 36.29 kg.)","offer_id":48014280884539,"sku":"28771","price":1032.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/DragonSkinFX-Pro-combo-1400x1050.jpg?v=1748703725"},{"product_id":"ecoflex-series","title":"Ecoflex™ Series","description":"\u003cp\u003e\u003cstrong\u003eEcoflex™\u003c\/strong\u003e rubbers are platinum-catalyzed silicones that are versatile and easy to use. \u003cstrong\u003eEcoflex™\u003c\/strong\u003e rubbers are mixed 1A:1B by weight or volume and cured at room temperature with negligible shrinkage. Low viscosity ensures easy mixing and de-airing. Cured rubber is very soft, very strong and very “stretchy”, stretching many times its original size without tearing and will rebound to its original form without distortion.\u003c\/p\u003e\n\u003cp\u003e\u003cimg height=\"392\" width=\"950\" alt=\"\" src=\"https:\/\/cdn.shoplightspeed.com\/shops\/606431\/files\/50867618\/ecoflexspecs.png\"\u003e\u003c\/p\u003e\n\u003cp\u003eFeatures\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEcoflex™\u003c\/strong\u003e rubbers are water white translucent and can be color pigmented with \u003cstrong\u003eSilc Pig™\u003c\/strong\u003e pigments for creating a variety of color effects. You can also add Smooth-On’s \u003cstrong\u003eSilicone Thinner™\u003c\/strong\u003e to further lower the viscosity. \u003cstrong\u003eTHI-VEX™\u003c\/strong\u003e silicone thickener can be added by weight to \u003cstrong\u003eEcoflex™\u003c\/strong\u003e silicones for brushable applications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEcoflex™\u003c\/strong\u003e rubbers are suitable for a variety of applications including making prosthetic appliances, cushioning for orthotics and special effects applications (especially in animatronics where repetitive motion is required).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: Ecoflex™ 00-10 cures with a “tacky” surface. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstructions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eSafety\u003c\/strong\u003e\u003c\/em\u003e – Use in a properly ventilated area (“room size” ventilation). Wear safety glasses, long sleeves and rubber gloves to minimize contamination risk. Wear vinyl gloves only. Latex gloves will inhibit the cure of the rubber. \u003cstrong\u003eStore and use material at room temperature (73°F\/23°C).\u003c\/strong\u003e Warmer temperatures will drastically reduce working time and cure time. Storing material at warmer temperatures will also reduce the usable shelf life of unused material. These products have a limited shelf life and should be used as soon as possible.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eCure Inhibition\u003c\/strong\u003e\u003c\/em\u003e – Addition-cure silicone rubber may be inhibited by certain contaminants in or on the pattern to be molded resulting in tackiness at the pattern interface or a total lack of cure throughout the mold. Latex, tin-cure silicone, sulfur clays, certain wood surfaces, newly cast polyester, epoxy or urethane rubber may cause inhibition. If compatibility between the rubber and the surface is a concern, a small-scale test is recommended. Apply a small amount of rubber onto a non-critical area of the pattern. Inhibition has occurred if the rubber is gummy or uncured after the recommended cure time has passed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBecause no two applications are quite the same, a small test application to determine suitability for your project is recommended if performance of this material is in question.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTo prevent inhibition, one or more coatings of a clear acrylic lacquer applied to the model surface is usually effective. Allow any sealer to thoroughly dry before applying rubber. Note: Even with a sealer, platinum silicones will not work with modeling clays containing heavy amounts of sulfur. Do a small scale test for compatibility before using on your project.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eApplying A Release Agent \u003c\/strong\u003e\u003c\/em\u003e- Although not usually necessary, a release agent will make demolding easier when pouring into or over most surfaces. \u003cstrong\u003eEase Release™ 200\u003c\/strong\u003e is a proven release agent for use with silicone rubber. Mann Ease Release™ products are available from Smooth-On or your Smooth-On distributor.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eIMPORTANT:\u003c\/strong\u003e\u003c\/em\u003e To ensure thorough coverage, lightly brush the release agent with a soft brush over all surfaces of the model. Follow with a light mist coating and let the release agent dry for 30 minutes.\u003c\/p\u003e\n\u003cp\u003eIf there is any question about the effectiveness of a sealer\/release agent combination, a small-scale test should be made on an identical surface for trial.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMEASURING \u0026amp; MIXING - \u003c\/strong\u003eBefore you begin, pre-mix Part B thoroughly. After dispensing required amounts of Parts A and B into mixing container (1A:1B by volume or weight), \u003cstrong\u003emix thoroughly for 3 minutes making sure that you scrape the sides and bottom of the mixing container several times.\u003c\/strong\u003e After mixing parts A and B, vacuum degassing is recommended to eliminate any entrapped air in liquid rubber. Your vacuum pump must pull a minimum of 29 inches of mercury (or 1 Bar \/ 100 KPa). Leave enough room in container for material expansion. Vacuum material until it rises, breaks and falls. Vacuum for 1 minute after material falls.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003ePouring \u003c\/strong\u003e\u003c\/em\u003e- For best results, pour your mixture in a single spot at the lowest point of the containment field. Let the rubber seek its level up and over the model. \u003cstrong\u003eA uniform flow will help minimize entrapped air.\u003c\/strong\u003e The liquid rubber should level off at least 1\/2” (1.3 cm) over the highest point of the model surface.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eCuring \/ Post Curing\u003c\/strong\u003e\u003c\/em\u003e - Allow rubber to cure as prescribed at room temperature (73°F\/23°C) before demolding. Do not cure rubber where temperature is less than 65°F\/18°C. \u003cstrong\u003eOptional:\u003c\/strong\u003e Post curing the mold will aid in quickly attaining maximum physical and performance properties. After curing at room temperature, expose the rubber to 176°F\/80°C for 2 hours and 212°F\/100°C for one hour. Allow mold to cool to room temperature before using.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eIf Using As A Mold\u003c\/strong\u003e\u003c\/em\u003e - When first cast, silicone rubber molds exhibit natural release characteristics. Depending on what is being cast into the mold, mold lubricity may be depleted over time and parts will begin to stick. No release agent is necessary when casting wax or gypsum. Applying a release agent such as \u003cstrong\u003eEase Release™ 200\u003c\/strong\u003e (available from Smooth-On) prior to casting polyurethane, polyester and epoxy resins is recommended to prevent mold degradation.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eThickening Ecoflex™ Silicones\u003c\/strong\u003e\u003c\/em\u003e - \u003cstrong\u003eTHI-VEX™\u003c\/strong\u003e is made especially for thickening Smooth-On’s silicones for vertical surface application (making brush-on molds). Different viscosities can be attained by varying the amount of \u003cstrong\u003eTHI-VEX™. See the THI-VEX™ technical bulletin\u003c\/strong\u003e (available from Smooth-On or your Smooth-On distributor) for full details.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eThinning Ecoflex™ Silicones\u003c\/strong\u003e\u003c\/em\u003e - Smooth-On’s \u003cstrong\u003eSilicone Thinner™\u003c\/strong\u003e will lower the viscosity of \u003cstrong\u003eEcoflex™\u003c\/strong\u003e silicones for easier pouring and vacuum degassing. \u003cstrong\u003eA\u003c\/strong\u003e \u003cstrong\u003edisadvantage\u003c\/strong\u003e is that ultimate tear and tensile are reduced in proportion to the amount of \u003cstrong\u003eSilicone Thinner™\u003c\/strong\u003e added.\u003cstrong\u003e It is not recommended to exceed 10% by weight of total system (A+B).\u003c\/strong\u003e See the \u003cstrong\u003eSilicone Thinner™\u003c\/strong\u003e technical bulletin (available from Smooth-On or your Smooth-On distributor) for full details.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eMold Performance \u0026amp; Storage\u003c\/strong\u003e\u003c\/em\u003e - The physical life of the mold depends on how you use it (materials cast, frequency, etc.). Casting abrasive materials such as concrete can quickly erode mold detail, while casting non-abrasive materials (wax) will not affect mold detail. Before storing, the mold should be cleaned with a soap solution and wiped fully dry. Two part (or more) molds should be assembled. Molds should be stored on a level surface in a cool, dry environment.\u003c\/p\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" href=\"https:\/\/www.smooth-on.com\/msds\/files\/BD_DS_Eco_Equ_EZB_EZS_Psy_MS_OOMOO_Reb_ST_SS_Soma_Sol_Sorta.pdf\" target=\"_blank\"\u003eSDS\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" href=\"https:\/\/www.smooth-on.com\/tb\/files\/SkinSafeDocs\/EcoFlex00-10SkinSafeCertification021919.pdf\" target=\"_blank\"\u003e00-10 Skin Safety Certification\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" href=\"https:\/\/www.smooth-on.com\/tb\/files\/SkinSafeDocs\/EcoFlex00-20SkinSafeCertification021919.pdf\" target=\"_blank\"\u003e00-20 Skin Safety Certification\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" href=\"https:\/\/www.smooth-on.com\/tb\/files\/SkinSafeDocs\/EcoFlex00-30SkinSafeCertification070819.pdf\" target=\"_blank\"\u003e00-30 Skin Safety Certification\u003c\/a\u003e\u003c\/p\u003e","brand":"Smooth-On","offers":[{"title":"00-10 Trial Kit (2 lbs. \/ 0.91 kg.)","offer_id":48033076609339,"sku":"87744","price":36.99,"currency_code":"USD","in_stock":false},{"title":"00-10 2 Gallon Kit (16 lbs. \/ 7.26 kg.)","offer_id":48033076642107,"sku":"87761","price":223.99,"currency_code":"USD","in_stock":false},{"title":"00-20 Trial Kit (2 lbs. \/ 0.91 kg.)","offer_id":48033076674875,"sku":"16844","price":34.99,"currency_code":"USD","in_stock":false},{"title":"00-20 2 Gallon Kit (16 lbs. \/ 7.26 kg.)","offer_id":48033076707643,"sku":"16861","price":206.99,"currency_code":"USD","in_stock":true},{"title":"00-20 10 Gallon Kit (80 lbs. \/ 36.29 kg.)","offer_id":48033076740411,"sku":"16871","price":851.99,"currency_code":"USD","in_stock":true},{"title":"00-20 FAST Trial Kit (2 lbs. \/ 0.91 kg.)","offer_id":48033076773179,"sku":"126344","price":34.99,"currency_code":"USD","in_stock":false},{"title":"00-20 FAST 2 Gallon Kit (16 lbs. \/ 7.26 kg.)","offer_id":48033076805947,"sku":"126361","price":210.99,"currency_code":"USD","in_stock":true},{"title":"00-20 FAST 10 Gallon Kit (80 lbs. \/ 36.29 kg.)","offer_id":50108774285627,"sku":"126371","price":867.99,"currency_code":"USD","in_stock":true},{"title":"00-30 Trial Kit (2 lbs. \/ 0.91 kg.)","offer_id":48033076838715,"sku":"86344","price":34.99,"currency_code":"USD","in_stock":false},{"title":"00-30 2 Gallon Kit (16 lbs. \/ 7.26 kg.)","offer_id":48033076871483,"sku":"86361","price":204.99,"currency_code":"USD","in_stock":true},{"title":"00-30 10 Gallon Kit (80 lbs. \/ 36.29 kg.)","offer_id":48033076904251,"sku":"86371","price":841.99,"currency_code":"USD","in_stock":true},{"title":"00-50 Trial Kit (2 lbs. \/ 0.91 kg.) Special Order","offer_id":49287824212283,"sku":"89844","price":34.99,"currency_code":"USD","in_stock":false},{"title":"00-50 2 Gallon Unit (16 lbs. \/ 7.26 kg.) Special Order","offer_id":51478181970235,"sku":null,"price":215.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/ecoflexsupercombo_09c6b4d0-9e19-4e87-a42a-d50137c76d6c.jpg?v=1711298688"},{"product_id":"ecoflex-near-clear-series","title":"Ecoflex™ Near Clear™ Series","description":"\u003cp\u003e\u003cstrong\u003eEcoflex™ 00-31 Near Clear™ \u003c\/strong\u003eand \u003cstrong\u003eEcoflex™ 00-45 Near Clear™ \u003c\/strong\u003eare very soft, platinum silicones that are clearer than other \u003cstrong\u003eEcoflex™ \u003c\/strong\u003esilicones. Versatile and easy to use,\u003cstrong\u003e Ecoflex™ Near Clear™\u003c\/strong\u003e rubbers are mixed 1A:1B by weight or volume and cures at room temperature with negligible shrinkage. Low viscosity ensures easy mixing and de-airing. Cured material is skin safe and certified by an independent laboratory.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shoplightspeed.com\/shops\/606431\/files\/50868805\/ecoflexnearclearspecs.png\" alt=\"\" width=\"961\" height=\"301\"\u003e\u003c\/p\u003e\n\u003cp\u003eFeatures\u003c\/p\u003e\n\u003cp\u003eCured rubber is very soft, very strong and very “stretchy”, stretching many times its original size without tearing and will rebound to its original form without distortion. \u003cstrong\u003eEcoflex™ Near Clears\u003c\/strong\u003e™ can be color pigmented with \u003cstrong\u003eSilc Pig™\u003c\/strong\u003e pigments for creating a variety of color effects. You can also add Smooth-On’s \u003cstrong\u003eSilicone Thinner™\u003c\/strong\u003e to further lower the viscosity.\u003c\/p\u003e\n\u003cp\u003eInstructions\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eSafety\u003c\/strong\u003e\u003c\/em\u003e – Use in a properly ventilated area (“room size” ventilation). Wear safety glasses, long sleeves and rubber gloves to minimize contamination risk. Wear vinyl gloves only. Latex gloves will inhibit the cure of the rubber. Store and use material at room temperature (73°F\/23°C). Warmer temperatures will drastically reduce working time and cure time. Storing material at warmer temperatures will also reduce the usable shelf life of unused material. These products have a limited shelf life and should be used as soon as possible.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eCure Inhibition\u003c\/strong\u003e\u003c\/em\u003e – Addition-cure silicone rubber may be inhibited by certain contaminants in or on the pattern to be molded resulting in tackiness at the pattern interface or a total lack of cure throughout the mold. Latex, tin-cure silicone, sulfur clays, certain wood surfaces, newly cast polyester, epoxy, tin cure silicone rubber or urethane rubber may cause inhibition. If compatibility between the rubber and the surface is a concern, a small-scale test is recommended. Apply a small amount of rubber onto a non-critical area of the pattern. Inhibition has occurred if the rubber is gummy or uncured after the recommended cure time has passed.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eBecause no two applications are quite the same, a small test application to determine suitability for your project is recommended if performance of this material is in question.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eTo prevent inhibition, one or more coatings of a clear acrylic lacquer applied to the model surface is usually effective. Allow any sealer to thoroughly dry before applying rubber. Note: Even with a sealer, platinum silicones will not work with modeling clays containing heavy amounts of sulfur. Do a small scale test for compatibility before using on your project.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eApplying A Release Agent \u003c\/strong\u003e\u003c\/em\u003e- Although not usually necessary, a release agent will make demolding easier when pouring into or over most surfaces. \u003cstrong\u003eEase Release™ 200\u003c\/strong\u003e is a proven release agent for use with silicone rubber. Mann Ease Release™ products are available from Smooth-On or your Smooth-On distributor.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eIMPORTANT:\u003c\/strong\u003e\u003c\/em\u003e To ensure thorough coverage, lightly brush the release agent with a soft brush over all surfaces of the model. Follow with a light mist coating and let the release agent dry for 30 minutes.\u003c\/p\u003e\n\u003cp\u003eIf there is any question about the effectiveness of a sealer\/release agent combination, a small-scale test should be made on an identical surface for trial.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eMEASURING \u0026amp; MIXING...\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eBefore you begin, pre-mix Part B thoroughly. After dispensing required amounts of Parts A and B into mixing container (1A:1B by volume or weight), mix thoroughly for 3 minutes making sure that you scrape the sides and bottom of the mixing container several times. After mixing parts A and B, vacuum degassing is recommended to eliminate any entrapped air. Vacuum material for 2-3 minutes (29 inches of mercury), making sure that you leave enough room in container for product volume expansion.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003ePOURING, CURING \u0026amp; MOLD PERFORMANCE...\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eFor best results, pour your mixture in a single spot at the lowest point of the containment field. Let the rubber seek its level up and over the model. A uniform flow will help minimize entrapped air. The liquid rubber should level off at least 1\/2” (1.3 cm) over the highest point of the model surface.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eCuring \/ Post Curing \u003c\/strong\u003e\u003c\/em\u003e- Allow rubber to cure as prescribed at room temperature (73°F\/23°C) before demolding. Do not cure rubber where temperature is less than 65°F\/18°C. Time to demold can be reduced with mild heat. \u003cstrong\u003eIMPORTANT: Rubber will darken considerably when exposed to heat. \u003c\/strong\u003eNote: Allow mold to cool to room temperature before handling.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOptional: \u003c\/strong\u003ePost curing the mold will aid in quickly attaining maximum physical and performance properties. After curing at room temperature, expose the rubber to 176°F\/80°C for 2 hours and 212°F\/100°C for one hour. Allow mold to cool to room temperature before using. \u003cstrong\u003eIMPORTANT: Rubber will darken considerably when exposed to heat.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eIf Using As A Mold\u003c\/strong\u003e\u003c\/em\u003e - When first cast, silicone rubber molds exhibit natural release characteristics. Depending on what is being cast into the mold, mold lubricity may be depleted over time and parts will begin to stick. No release agent is necessary™when casting wax or gypsum. Applying a release agent such as \u003cstrong\u003eEase Release™ 200 \u003c\/strong\u003e(available from Smooth-On) prior to casting polyurethane, polyester and epoxy resins is recommended to prevent mold degradation.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eThinning Ecoflex™ 00-45 Near Clear™ Silicone \u003c\/strong\u003e\u003c\/em\u003e- Smooth-On’s \u003cstrong\u003eSilicone Thinner™\u003c\/strong\u003e will lower the viscosity of \u003cstrong\u003eEcoflex 00-45 Near Clear™\u003c\/strong\u003e silicones for easier pouring and vacuum degassing. A disadvantage is that ultimate tear and tensile are reduced in proportion to the amount of \u003cstrong\u003eSilicone Thinner™\u003c\/strong\u003e added. \u003cem\u003e\u003cstrong\u003eIt is not recommended to exceed 10% by weight of total system (A+B)\u003c\/strong\u003e\u003c\/em\u003e. See the \u003cstrong\u003eSilicone Thinner™\u003c\/strong\u003e technical bulletin (available from Smooth-On or your Smooth-On distributor) for full details.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eMold Performance \u0026amp; Storage\u003c\/strong\u003e\u003c\/em\u003e - The physical life of the mold depends on how you use it (materials cast, frequency, etc.). Casting abrasive materials such as concrete can quickly erode mold detail, while casting non-abrasive materials (wax) will not affect mold detail. Before storing, the mold should be cleaned with a soap solution and wiped fully dry. Two part (or more) molds should be assembled. Molds should be stored on a level surface in a cool, dry environment.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/msds\/files\/ECOFLEX%2000-31_A_2_B_2%20SDS.pdf\" rel=\"noopener\" target=\"_blank\"\u003e00-31 SDS\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/msds\/files\/ECOFLEX%2000-45%20A_2_B_2%20SDS.pdf\" rel=\"noopener\" target=\"_blank\"\u003e00-45 SDS\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/tb\/files\/SkinSafeDocs\/Ecoflex00-31NearClearSkinSafeCertification102621.pdf\" rel=\"noopener\" target=\"_blank\"\u003e00-31 Skin Safety Certification\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/tb\/files\/SkinSafeDocs\/Ecoflex00-45NearClearSkinSafeCertification102621.pdf\" rel=\"noopener\" target=\"_blank\"\u003e00-45 Skin Safety Certification\u003c\/a\u003e\u003c\/p\u003e","brand":"Smooth-On","offers":[{"title":"00-31 Trial Kit (2 lbs. \/ 0.91 kg.)","offer_id":48033075462459,"sku":"117144","price":40.99,"currency_code":"USD","in_stock":false},{"title":"00-31 2 Gallon Kit (16 lbs. \/ 7.26 kg.)","offer_id":48033075495227,"sku":"117161","price":252.99,"currency_code":"USD","in_stock":true},{"title":"00-31 10 Gallon Kit Special Order (80 lbs. \/ 36.29 kg.)","offer_id":48429210927419,"sku":"117171","price":1047.99,"currency_code":"USD","in_stock":false},{"title":"00-45 Trial Kit (2 lbs. \/ 0.91 kg.)","offer_id":48033075527995,"sku":"113342","price":39.99,"currency_code":"USD","in_stock":true},{"title":"00-45 2 Gallon Kit (16 lbs. \/ 7.26 kg.)","offer_id":48033075560763,"sku":"113361","price":249.99,"currency_code":"USD","in_stock":false},{"title":"00-45 10 Gallon Kit Special Order (80 lbs. \/ 36.29 kg.)","offer_id":48429210960187,"sku":"113371","price":1039.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/ecoflexnearclearcombo.jpg?v=1711298669"},{"product_id":"ecoflex-gel-special-order","title":"Ecoflex™ GEL","description":"\u003cp\u003e\u003cstrong\u003ePLEASE CALL US TO ORDER IF NOT IN STOCK\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEcoflex™ GEL\u003c\/strong\u003e is an extremely soft, platinum silicone rubber gel specifically designed for creating silicone makeup appliances, for cushioning, creating gaskets, encapsulation, and other applications requiring a very soft silicone material.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCertified Skin Safe - \u003c\/strong\u003eCured \u003cstrong\u003eEcoflex™ GEL\u003c\/strong\u003e is skin safe and is certified by an independent laboratory. \u003c\/p\u003e\n\u003cp\u003e\u003cimg height=\"689\" width=\"425\" alt=\"\" src=\"https:\/\/cdn.shoplightspeed.com\/shops\/606431\/files\/50870883\/ecoflexgelspecs.png\"\u003e\u003c\/p\u003e\n\u003cp\u003eFeatures\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEcoflex™ GEL\u003c\/strong\u003e \u003cstrong\u003ehas a Shore hardness of 000-35,\u003c\/strong\u003e this is below the Shore 00 hardness scale. Because \u003cstrong\u003eEcoflex™ GEL\u003c\/strong\u003e is so soft, it works very well as a silicone gel for filling encapsulated silicone makeup appliances and prosthetics. An infinite number of color effects can be achieved by adding \u003cstrong\u003eSilc Pig™ silicone pigments. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAs \u003cstrong\u003eEcoflex™ GEL\u003c\/strong\u003e is very tacky when cured, in some situations, it is recommended that \u003cstrong\u003eEcoflex™ GEL\u003c\/strong\u003e be encapsulated with another non-tacky platinum silicone such as \u003cstrong\u003eDragon Skin™ FX Pro\u003c\/strong\u003e, or another suitable membrane. \u003cstrong\u003eEcoflex™ GEL\u003c\/strong\u003e is mixed 1A:1B by weight or volume. Rubber cures at room temperature (73°F \/ 23°C) with negligible shrinkage.\u003c\/p\u003e\n\u003cp\u003eInstructions\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003ePreparation\u003c\/strong\u003e\u003c\/em\u003e - Materials should be stored in and used at room temperature (73°F \/ 23°C). These products have a limited shelf life and should be used as soon as possible. Rubber may be inhibited by sulfur based clays resulting in tackiness at the surface interface or a total lack of cure throughout the mold.\u003c\/p\u003e\n\u003cp\u003eIf compatibility between the rubber and the surface is a concern, a small-scale test is recommended. Apply a small amount of rubber onto a non-critical area. Inhibition has occurred if the rubber is gummy or uncured after the recommended cure time has passed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eUSING ECOFLEX™ GEL FOR MAKING SILICONE PROSTHETIC MAKEUP APPLIANCES \u003c\/em\u003e-\u003c\/strong\u003e \u003cstrong\u003eEcoflex™ GEL\u003c\/strong\u003e can be used as a gel filler for creating silicone prosthetic appliances. In most cases, \u003cstrong\u003eEcoflex™ GEL \u003c\/strong\u003eshould be encapsulated. For example, \u003cstrong\u003eDragon Skin™ FX-Pro\u003c\/strong\u003e can be stippled onto a mold surface (e.g. \u003cstrong\u003eShell Shock™\u003c\/strong\u003e released with \u003cstrong\u003eEase Release™ 200\u003c\/strong\u003e) to create a membrane. \u003cstrong\u003eEcoflex™ GEL\u003c\/strong\u003e can then be poured or injected into the mold to create a soft gel prosthetic encapsulated with strong, non-tacky \u003cstrong\u003eDragon Skin™ FX-Pro\u003c\/strong\u003e silicone.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eApplying a Release Agent\u003c\/strong\u003e\u003c\/em\u003e - Although not always necessary, a release agent will make demolding easier when casting into most surfaces. \u003cstrong\u003eEase Release™ 200\u003c\/strong\u003e available from Smooth-On is a proven release agent for releasing silicone from silicone or other surfaces.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBecause no two applications are quite the same, a small test application to determine suitability for your project is recommended if performance of this material is in question.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eMEASURING \u0026amp; MIXING \u003c\/em\u003e- \u003c\/strong\u003eBefore you begin, pre-mix Part B thoroughly. After dispensing required amounts of Parts A and B into mixing container (1A:1B by volume or weight), \u003cstrong\u003emix thoroughly\u003c\/strong\u003e making sure that you \u003cstrong\u003escrape the sides and bottom of the mixing container several times.\u003c\/strong\u003e For best results, ‘double mix’ the material by pouring the mixture into a new container, then continuing to mix until material is thoroughly blended.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003ePouring\u003c\/strong\u003e\u003c\/em\u003e - For best results, pour your mixture in a single spot at the lowest point of the containment field or mold. Let the rubber seek its own level. \u003cstrong\u003eA uniform flow will help minimize entrapped air.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eCuring\u003c\/strong\u003e\u003c\/em\u003e - Allow rubber to cure for 2 hours at room temperature (73°F\/23°C) before demolding. Time to demold can be reduced with mild heat. Do not cure rubber where temperature is less than 65°F\/18°C.\u003c\/p\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" href=\"https:\/\/www.smooth-on.com\/msds\/files\/BD_DS_Eco_Equ_EZB_EZS_Psy_MS_OOMOO_Reb_ST_SS_Soma_Sol_Sorta.pdf\" target=\"_blank\"\u003eSDS\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" href=\"https:\/\/www.smooth-on.com\/tb\/files\/SkinSafeDocs\/EcoflexGelSkinSafeCertificate13018.pdf\" target=\"_blank\"\u003eSkin Safety Certification\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Smooth-On","offers":[{"title":"Trial Kit (2 lbs. \/ 0.91 kg.)","offer_id":48015679717691,"sku":"33544","price":37.99,"currency_code":"USD","in_stock":true},{"title":"2 Gallon Kit (16 lbs. \/ 7.26 kg.)","offer_id":48015679750459,"sku":"33561","price":236.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/Ecoflex-Gel-combo-1400x1050.jpg?v=1748720402"},{"product_id":"platsil-gel-10","title":"PlatSil® Gel-10","description":"\u003cp\u003ePlatSil® Gel-10 Silicone Rubber is a two-part, platinum-catalyzed, liquid silicone system that cures (RTV) to a milky white, Shore A10 rubber. This silicone is most often used to make prosthetic appliances (in conjunction with Smith's Theatrical Prosthetic Deadener or PlatSil® Deadener LV), for lifecasting and mold making.\u003c\/p\u003e\n\u003cp\u003ePlatSil® Gel-10 has been tested by an independent laboratory and was found to comply with \u003cstrong\u003e21 CFR 177.2600 (as published in the Code of Federal Regulations)\u003c\/strong\u003e for rubber articles intended for repeated use \u003cstrong\u003efood contact\u003c\/strong\u003e surfaces when accurately measured, thoroughly mixed, and fully cured.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlatSil® Gel-10 has been independently certified as skin safe.\u003c\/strong\u003e It complies with the requirements of applicable sections U.S. Federal Hazardous Substance Act (FHSA) Regulations (16 CFR 1500), LHAMA (16 CFR 1500.14), ASTM D4236, Sections 201(s) and 409 of the Federal Food, Drug, and Cosmetic Act and requirements for Toxicology Risk Assessments.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFOR INDUSTRIAL\/PROFESSIONAL USE ONLY. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"flex-50\"\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cdiv\u003eMix Ratio by Volume:1A:1B\u003c\/div\u003e\n\u003cdiv\u003eMix Ratio by Weight:1A:1B\u003c\/div\u003e\n\u003cdiv\u003eShore Hardness:A10\u003c\/div\u003e\n\u003cdiv\u003ePour Time: 6 min.\u003c\/div\u003e\n\u003cdiv\u003eDemold Time: 30 min.\u003c\/div\u003e\n\u003cdiv\u003eCured Color: Milky White\u003c\/div\u003e\n\u003cdiv\u003eMixed Viscosity: 15,000 cP\u003c\/div\u003e\n\u003cdiv\u003eSpecific Volume: 25 in³\/lb\u003c\/div\u003e\n\u003cdiv\u003eSpecific Gravity: 1.1\u003c\/div\u003e\n\u003cdiv\u003eElongation: 970 %\u003c\/div\u003e\n\u003cdiv\u003eTensile Strength: 228 psi\u003c\/div\u003e\n\u003cdiv\u003eDie B Tear Strength: 80 pli\u003c\/div\u003e\n\u003cdiv\u003eDie T Tear Strength: 27 pli\u003c\/div\u003e\n\u003cdiv\u003eCure Inhibition: Contamination from sulfur (e.g., sulfur-based clay), amines, tin compounds, cured polyester resin, some paints and some silicone rubbers may inhibit surface cure of platinum-cured rubbers.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003ca class=\"tds\" href=\"https:\/\/polytek.com\/content\/pdf\/TDS\/PlatSilGels_TechnicalBulletin_Polytek_ALL_SkinSafe.pdf\" target=\"_blank\"\u003eTechnical Bulletin\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca class=\"sds\" href=\"https:\/\/polytek.com\/content\/pdf\/SDS\/Polytek_SDS_PlatSil-NonHaz-AB_11-07-2019.pdf\" target=\"_blank\"\u003eSafety Data Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ctable\u003e\n\u003ccaption\u003e\u003cstrong\u003eKit Components\u003c\/strong\u003e\u003c\/caption\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003ePlatSil® Gel-10\u003c\/th\u003e\n\u003cth\u003eComponents\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2-lb kit includes:\u003c\/td\u003e\n\u003ctd\u003e1 lb of PlatSil® Gel-10 Part A (~1 pint)\u003cbr\u003e1 lb of PlatSil® Gel-10 Part B (~1 pint)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e16-lb kit includes:\u003c\/td\u003e\n\u003ctd\u003e8 lb of PlatSil® Gel-10 Part A (~1 gallon)\u003cbr\u003e8 lb of PlatSil® Gel-10 Part B (~1 gallon)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e80-lb kit includes:\u003c\/td\u003e\n\u003ctd\u003e40 lb of PlatSil® Gel-10 Part A (~5 gallons)\u003cbr\u003e40 lb of PlatSil® Gel-10 Part B (~5 gallons)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Polytek","offers":[{"title":"Trial Kit","offer_id":48015688958267,"sku":"GEL10U2","price":85.0,"currency_code":"USD","in_stock":true},{"title":"2 Gallon Kit","offer_id":48015688991035,"sku":"GEL10U16","price":322.0,"currency_code":"USD","in_stock":true},{"title":"10 Gallon Kit","offer_id":48015689023803,"sku":"GEL10U80","price":1680.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/gel10supercombo.png?v=1713885190"},{"product_id":"platsil-gel-oo-series","title":"PlatSil® Gel-OO Series","description":"\u003cp\u003e\u003cstrong\u003ePLEASE NOTE THAT SMALLER SIZES OF THESE RUBBERS ARE DISCONTINUED AND NO LONGER AVAILABLE.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePlatSil® Gel-OO Silicone Rubber is a two-part, platinum-catalyzed, liquid silicone system that cures (RTV) to a milky white, Shore OO30 rubber. This silicone is most often used to make prosthetic appliances (in conjunction with Smith's Theatrical Prosthetic Deadener) and in other special effects applications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlatSil® Gel-OO has been independently certified as skin safe.\u003c\/strong\u003e It complies with the requirements of applicable sections U.S. Federal Hazardous Substance Act (FHSA) Regulations (16 CFR 1500), LHAMA (16 CFR 1500.14), ASTM D4236, Sections 201(s) and 409 of the Federal Food, Drug, and Cosmetic Act and requirements for Toxicology Risk Assessments.\u003c\/p\u003e\n\u003cp\u003ePlatSil\u003csup\u003e®\u003c\/sup\u003e Gel-OO20 Silicone Rubber is a two-part, platinum-catalyzed, liquid silicone system that cures (RTV) to a milky white, Shore OO20 rubber. This silicone is most often used to make hyper-realistic silicone masks, prosthetic appliances, animatronics, medical models and training aids and other special effects applications.\u003c\/p\u003e\n\u003cp\u003ePlatSil\u003csup\u003e®\u003c\/sup\u003e Gel-OO30 Silicone Rubber is a two-part, platinum-catalyzed, liquid silicone system that cures (RTV) to a milky white, Shore OO30 rubber. This silicone is most often used to make hyper-realistic silicone masks, prosthetic appliances, animatronics, medical models and training aids and other special effects applications.\u003c\/p\u003e\n\u003cp\u003e\u003cimg height=\"374\" width=\"637\" alt=\"\" src=\"https:\/\/cdn.shoplightspeed.com\/shops\/606431\/files\/51910016\/gel00seriesspecs.png\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca class=\"tds\" href=\"https:\/\/polytek.com\/content\/pdf\/TDS\/PlatSilGels_TechnicalBulletin_Polytek_ALL_SkinSafe.pdf\" target=\"_blank\"\u003eTechnical Bulletin 00\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca class=\"sds\" href=\"https:\/\/polytek.com\/content\/pdf\/SDS\/Polytek_SDS_PlatSil-NonHaz-AB_11-07-2019.pdf\" target=\"_blank\"\u003eSafety Data Sheet 00\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca class=\"tds\" href=\"https:\/\/polytek.com\/content\/pdf\/TDS\/PlatSilGels_TechnicalBulletin_Polytek%20Std%20Prods%20SkinSafe.pdf\" target=\"_blank\"\u003eTechnical Bulletin  0020\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca class=\"sds\" href=\"https:\/\/polytek.com\/content\/pdf\/SDS\/Polytek_SDS_PlatSil-NonHaz-AB_11-07-2019.pdf\" target=\"_blank\"\u003eSafety Data Sheet  0020\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca class=\"tds\" href=\"https:\/\/polytek.com\/content\/pdf\/TDS\/PlatSilGels_TechnicalBulletin_Polytek%20Std%20Prods%20SkinSafe.pdf\" target=\"_blank\"\u003eTechnical Bulletin  0030\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca class=\"sds\" href=\"https:\/\/polytek.com\/content\/pdf\/SDS\/Polytek_SDS_PlatSil-NonHaz-AB_11-07-2019.pdf\" target=\"_blank\"\u003eSafety Data Sheet  0030\u003c\/a\u003e\u003c\/p\u003e","brand":"Polytek","offers":[{"title":"00 80lb Kit 10 Gallons","offer_id":48015727001915,"sku":"GEL00U80","price":1680.0,"currency_code":"USD","in_stock":false},{"title":"0020 80lb Kit 10 Gallons","offer_id":48015727034683,"sku":"GEL0020U80","price":1680.0,"currency_code":"USD","in_stock":false},{"title":"0030 80lb Kit 10 Gallons","offer_id":48015727067451,"sku":"GEL0030U80","price":1680.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/gel00pail.png?v=1710988495"},{"product_id":"zafx-silicone","title":"ZAFX Silicone","description":"\u003cp\u003e \u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eZhermack SFX 00-20\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eA colorless, very soft and stretchable silicone ideally suited for masks, robotics and similar projects.\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eColourless\u003c\/li\u003e\r\n\u003cli\u003eLow shrinkage \u0026lt;0.1%.\u003c\/li\u003e\r\n\u003cli\u003eGood fluidity\u003c\/li\u003e\r\n\u003cli\u003eSelf-ventilating\u003c\/li\u003e\r\n\u003cli\u003eUsable on the skin\u003c\/li\u003e\r\n\u003cli\u003eVery soft\u003c\/li\u003e\r\n\u003cli\u003eExtremely stretchy 770%\u003c\/li\u003e\r\n\u003cli\u003eMixing of components 1:1 according to weight ratios\u003c\/li\u003e\r\n\u003cli\u003every high level of detail\u003c\/li\u003e\r\n\u003cli\u003eexcellent non-stick effect for easy release of models\u003c\/li\u003e\r\n\u003cli\u003every good mechanical properties\u003c\/li\u003e\r\n\u003cli\u003ecan be used with Deadner to achieve gel consistency\u003c\/li\u003e\r\n\u003cli\u003eBreaking load 1.2 N\/mm²\u003c\/li\u003e\r\n\u003cli\u003eTensile strength 3.5 N\/mm²\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eZhermack SFX 00-30\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eA colorless, very soft and stretchable silicone ideally suited for masks, robotics and similar projects.\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eColourless\u003c\/li\u003e\r\n\u003cli\u003eLow shrinkage \u0026lt;0.1%.\u003c\/li\u003e\r\n\u003cli\u003eGood fluidity\u003c\/li\u003e\r\n\u003cli\u003eSelf-ventilating\u003c\/li\u003e\r\n\u003cli\u003eUsable on the skin\u003c\/li\u003e\r\n\u003cli\u003eVery soft\u003c\/li\u003e\r\n\u003cli\u003eExtremely stretchy 850%\u003c\/li\u003e\r\n\u003cli\u003eMixing of components 1:1 according to weight ratios\u003c\/li\u003e\r\n\u003cli\u003every high level of detail\u003c\/li\u003e\r\n\u003cli\u003eexcellent non-stick effect for easy release of models\u003c\/li\u003e\r\n\u003cli\u003every good mechanical properties\u003c\/li\u003e\r\n\u003cli\u003ecan be used with Deadner to achieve gel consistency\u003c\/li\u003e\r\n\u003cli\u003eBreaking load 1.2 N\/mm²\u003c\/li\u003e\r\n\u003cli\u003eTensile strength 3.5 N\/mm²\u003c\/li\u003e\r\n\u003cli\u003eDensity 0.95 g\/cm3\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e \u003c\/p\u003e","brand":"Zhermack","offers":[{"title":"00-20 2kg","offer_id":48019467239739,"sku":null,"price":95.0,"currency_code":"USD","in_stock":true},{"title":"00-20 10kg","offer_id":48019467272507,"sku":null,"price":405.0,"currency_code":"USD","in_stock":true},{"title":"00-30 2kg","offer_id":48019467305275,"sku":null,"price":95.0,"currency_code":"USD","in_stock":true},{"title":"00-30 10kg","offer_id":48019467338043,"sku":null,"price":405.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/002010kg.jpg?v=1711032205"},{"product_id":"silskin-10-silicone-2kg","title":"Silskin 10 Silicone 2kg","description":"\u003ctable data-mce-fragment=\"1\"\u003e\n\u003cthead data-mce-fragment=\"1\"\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003cth data-mce-fragment=\"1\"\u003eName\u003c\/th\u003e\n\u003cth data-mce-fragment=\"1\"\u003eChemical\u003c\/th\u003e\n\u003cth data-mce-fragment=\"1\"\u003eColour\u003c\/th\u003e\n\u003cth data-mce-fragment=\"1\"\u003eMixing ratio\u003c\/th\u003e\n\u003cth data-mce-fragment=\"1\"\u003eHardness\u003c\/th\u003e\n\u003cth data-mce-fragment=\"1\"\u003eWT (@ 23°C)\u003c\/th\u003e\n\u003cth data-mce-fragment=\"1\"\u003eST (@ 23°C)\u003c\/th\u003e\n\u003cth data-mce-fragment=\"1\"\u003eTear (N\/mm)\u003c\/th\u003e\n\u003cth data-mce-fragment=\"1\"\u003eVisc (cP)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody data-mce-fragment=\"1\"\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\"\u003eSilskin 10\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\"\u003eRTV-2 Platinum cure\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\"\u003etranslucid\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\"\u003e1 : 1\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\"\u003e10 ShA\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\"\u003e7'\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\"\u003e30'\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\"\u003e11\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\"\u003e4500\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Zhermack","offers":[{"title":"Default Title","offer_id":48033133068603,"sku":null,"price":95.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/Silskin10Silicone2kg.png?v=1711300283"},{"product_id":"za-22-thixo-body-silicone-50kg","title":"ZA-22 Silicone 50kg","description":"\u003ctable data-mce-fragment=\"1\" style=\"width: 100%;\"\u003e\n\u003cthead data-mce-fragment=\"1\"\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003cth data-mce-fragment=\"1\" style=\"width: 8.94454%;\"\u003eName\u003c\/th\u003e\n\u003cth data-mce-fragment=\"1\" style=\"width: 16.8157%;\"\u003eChemical\u003c\/th\u003e\n\u003cth data-mce-fragment=\"1\" style=\"width: 9.30233%;\"\u003eColour\u003c\/th\u003e\n\u003cth data-mce-fragment=\"1\" style=\"width: 11.6279%;\"\u003eMixing ratio\u003c\/th\u003e\n\u003cth data-mce-fragment=\"1\" style=\"width: 16.1002%;\"\u003eHardness\u003c\/th\u003e\n\u003cth data-mce-fragment=\"1\" style=\"width: 7.15564%;\"\u003eWT (@ 23°C)\u003c\/th\u003e\n\u003cth data-mce-fragment=\"1\" style=\"width: 10.0179%;\"\u003eST (@ 23°C)\u003c\/th\u003e\n\u003cth data-mce-fragment=\"1\" style=\"width: 10.5546%;\"\u003eTear (N\/mm)\u003c\/th\u003e\n\u003cth data-mce-fragment=\"1\" style=\"width: 6.79785%;\"\u003eVisc\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody data-mce-fragment=\"1\"\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 8.94454%;\"\u003eZA-22 \u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 16.8157%;\"\u003eRTV-2 Platinum cure\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 9.30233%;\"\u003eblue\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 11.6279%;\"\u003e1 : 1\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 16.1002%;\"\u003e20 ShA\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 7.15564%;\"\u003e15min\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 10.0179%;\"\u003e90min\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 10.5546%;\"\u003e4.5\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 6.79785%;\"\u003e4500\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Zhermack","offers":[{"title":"Default Title","offer_id":48033150894395,"sku":"DT23343","price":1520.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/Photoroom-20250104_100541.png?v=1736003645"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/collections\/silicone-faces-2.jpg?v=1710021383","url":"https:\/\/maacaffestore.com\/collections\/soft-casting-silicones.oembed","provider":"The Compleat Sculptor, Inc","version":"1.0","type":"link"}