{"product_id":"equinox-series","title":"Equinox™ Series","description":"\u003cp\u003e\u003cstrong\u003eEquinox™\u003c\/strong\u003e Silicone Putty Products are new silicone compounds (platinum catalyst) that can be easily mixed and applied by hand to a variety of surfaces. \u003cstrong\u003eEquinox™\u003c\/strong\u003e Putty is mixed in equal amounts (1A:1B) by volume.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shoplightspeed.com\/shops\/606431\/files\/50880575\/equinoxspecs.png\" alt=\"\" width=\"970\" height=\"317\"\u003e\u003c\/p\u003e\n\u003cp\u003eFeatures\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEquinox™ 38\u003c\/strong\u003e has a pot life of 4 minutes with a cure time of 30 minutes.  \u003cstrong\u003eEquinox™\u003c\/strong\u003e \u003cstrong\u003e40 \u003c\/strong\u003eis a slow version with a 30 minute pot life and 5 hour demold time. Shrinkage is low and cured rubber is exceptionally strong (very high tensile strength), durable and will resist high temperatures (for casting low-temperature melt metal alloys). They also resist cure inhibition. \u003cstrong\u003eEquinox™\u003c\/strong\u003e Silicones are also \u003cstrong\u003eFOOD SAFE\u003c\/strong\u003e and can be used for culinary applications.\u003c\/p\u003e\n\u003cp\u003eApplications include making fast mold impressions from almost any surface, orthotics \/ orthopedic, equine hoof repair, jewelry making and more.\u003c\/p\u003e\n\u003cp\u003eInstructions\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eSafety\u003c\/em\u003e \u003c\/strong\u003e– Use in a properly ventilated area (“room size” ventilation). Wear safety glasses, long sleeves and rubber gloves to minimize contamination risk. Wear vinyl gloves only. Latex gloves will inhibit the cure of the rubber.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStore and use material at room temperature (73°F\/23°C).\u003c\/strong\u003e Warmer temperatures will drastically reduce working time and cure time. Storing material at warmer temperatures will also reduce the usable shelf life of unused material. These products have a limited shelf life and should be used as soon as possible.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eCure Inhibition\u003c\/strong\u003e\u003c\/em\u003e – Addition-cure silicone rubber may be inhibited by certain contaminants in or on the pattern to be molded resulting in tackiness at the pattern interface or a total lack of cure throughout the mold. Latex, tin-cure silicone, sulfur clays, certain wood surfaces, newly cast polyester, epoxy or urethane rubber may cause inhibition. If compatibility between the rubber and the surface is a concern, a small-scale test is recommended. Apply a small amount of rubber onto a non-critical area of the pattern. Inhibition has occurred if the rubber is gummy or uncured after the recommended cure time has passed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBecause no two applications are quite the same, a small test application to determine suitability for your project is recommended if performance of this material is in question.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTo prevent inhibition, one or more coatings of a clear acrylic lacquer applied to the model surface is usually effective. Allow any sealer to thoroughly dry before applying rubber. Note: Even with a sealer, platinum silicones will not work with modeling clays containing heavy amounts of sulfur. Do a small scale test for compatibility before using on your project.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eAPPLYING A RELEASE AGENT \u003c\/em\u003e-\u003c\/strong\u003e Although not usually necessary, a release agent will make demolding easier when pouring into or over most surfaces. \u003cstrong\u003eEase Release™ 200\u003c\/strong\u003e is a proven release agent for making molds with silicone rubber. Mann Ease Release™ products are available from Smooth-On or your Smooth-On distributor.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT:\u003c\/strong\u003e To ensure thorough coverage, lightly brush the release agent with a soft brush over all surfaces of the model. Follow with a light mist coating and let the release agent dry for 30 minutes.\u003c\/p\u003e\n\u003cp\u003eIf there is any question about the effectiveness of a sealer\/release agent combination, a small-scale test should be made on an identical surface for trial.\u003c\/p\u003e\n\u003cp\u003eThis product is mixed by hand. If you choose to wear gloves, wear vinyl gloves only. Latex gloves will inhibit the cure of the rubber.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eMeasuring\u003c\/strong\u003e\u003c\/em\u003e - \u003cstrong\u003eEquinox™\u003c\/strong\u003e Series Putty comes as two parts. Dispense equal amounts (golf ball size, for example) of Part A and Part B. These products have a limited shelf life and should be used as soon as possible.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eMixing\u003c\/strong\u003e\u003c\/em\u003e - Knead parts together aggressively to a uniform color and apply quickly.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eApplying\u003c\/strong\u003e\u003c\/em\u003e - Putty can be applied directly to almost any model surface (see preparation above).\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eCuring\u003c\/strong\u003e\u003c\/em\u003e - Allow the rubber to cure at room temperature (73°F\/23°C) before removing from model surface. Applying heat (heat gun, hair dryer, heat lamp, etc.) will cause the rubber to cure faster. Because no two applications are quite the same, a small test application to determine suitability for your project is recommended if performance of this material is in question.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eApplying a Support Shell\u003c\/strong\u003e\u003c\/em\u003e - Usually, Putty molds will be too thin to support themselves during casting. A support shell made of \u003cstrong\u003ePlasti-Paste II™\u003c\/strong\u003e or \u003cstrong\u003eMatrix™ NEO™\u003c\/strong\u003e and chopped fiber can be applied over the mold surface.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003ePost Curing \u003c\/em\u003e- \u003c\/strong\u003eDo not cure rubber where temperature is less than 65°F\/18°C. \u003cstrong\u003eOptional:\u003c\/strong\u003e Post curing the mold will aid in quickly attaining maximum physical and performance properties. After curing at room temperature, expose the rubber to 176°F\/80°C for 2 hours and 212°F\/100°C for one hour. Allow mold to cool to room temperature before using.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eUsing The Mold\u003c\/strong\u003e\u003c\/em\u003e - When first cast, silicone rubber molds exhibit natural release characteristics. Depending on what is being cast into the mold, mold lubricity may be depleted over time and parts will begin to stick. No release agent is necessary when casting wax or gypsum. Applying a release agent such as \u003cstrong\u003eEase Release™ 200\u003c\/strong\u003e (available from Smooth-On) prior to casting polyurethane, polyester and epoxy resins is recommended to prevent mold degradation.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eMold Performance \u0026amp; Storage\u003c\/strong\u003e\u003c\/em\u003e - The physical life of the mold depends on how you use it (materials cast, frequency, etc.). Casting abrasive materials such as concrete can quickly erode mold detail, while casting non-abrasive materials (wax) will not affect mold detail. Before storing, the mold should be cleaned with a soap solution and wiped fully dry. Two part (or more) molds should be assembled. Molds should be stored on a level surface in a cool, dry environment.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/www.smooth-on.com\/msds\/files\/BD_DS_Eco_Equ_EZB_EZS_Psy_MS_OOMOO_Reb_ST_SS_Soma_Sol_Sorta.pdf\" rel=\"noopener\" target=\"_blank\"\u003eSDS\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/tb\/files\/FOOD_SAFE_SILICONES.pdf\" rel=\"noopener\" target=\"_blank\"\u003eFood Safe Tech Bulletin\u003c\/a\u003e\u003c\/p\u003e","brand":"Smooth-On","offers":[{"title":"38 MEDIUM Trial Kit (2 lbs. \/ 0.91 kg.)","offer_id":48015681356091,"sku":"29744","price":49.99,"currency_code":"USD","in_stock":false},{"title":"38 MEDIUM 2 Gallon Kit (16 lbs. \/ 7.26 kg.)","offer_id":48015681388859,"sku":"29761","price":297.99,"currency_code":"USD","in_stock":false},{"title":"40 SLOW Trial Kit (2 lbs. \/ 0.91 kg.)","offer_id":48015681421627,"sku":"87844","price":49.99,"currency_code":"USD","in_stock":false},{"title":"40 SLOW 2 Gallon Kit (16 lbs. \/ 7.26 kg.)","offer_id":48015681454395,"sku":"87861","price":297.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/equinoxcombo.jpg?v=1713390773","url":"https:\/\/maacaffestore.com\/products\/equinox-series","provider":"The Compleat Sculptor, Inc","version":"1.0","type":"link"}