{"product_id":"skin-tite","title":"Skin Tite™","description":"\u003cp\u003e\u003cstrong\u003eSkin Tite™\u003c\/strong\u003e is a skin safe silicone used to create fast wounds, scars and to adhere silicone appliances directly to the skin. It can be sculpted “on the fly”, offers maximum control and stays precisely where you put it. \u003cstrong\u003eSkin Tite™\u003c\/strong\u003e will adhere to the skin and perfectly conforms to all contours. Cured rubber is strong and will flex with body movement. Wounds and appliances will not come off until you remove them. Material is skin safe and certified by an independent laboratory.\u003c\/p\u003e\r\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shoplightspeed.com\/shops\/606431\/files\/52082668\/skintitespecs.png\" alt=\"\" width=\"498\" height=\"408\"\u003e\u003c\/p\u003e\r\n\u003cp\u003eAn infinite variety of color effects are achieved using \u003cstrong\u003eSilc Pig™ \u003c\/strong\u003esilicone pigments. Blended \u003cstrong\u003eSilc Pig™\u003c\/strong\u003e color pigments added to \u003cstrong\u003eSkin Tite™\u003c\/strong\u003e will create hyper-realistic cuts, scars, slash wounds, bruises, necrotic (dead skin) effects, bullet holes and more. \u003cstrong\u003eTHI-VEX™\u003c\/strong\u003e thickener will thicken \u003cstrong\u003eSkin Tite™\u003c\/strong\u003e for even greater vertical hang control and is ideal for creating skin pockets, hanging skin, deep cuts \u0026amp; wounds, holes and more.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eBio-Adhesive:\u003c\/strong\u003e \u003cstrong\u003eSkin Tite™\u003c\/strong\u003e can also be used to adhere skin effects silicone appliances or silicone masks to the skin even when affixed to hard to hold areas such as elbows, fingers and joints. It is ideal for repetitive motion applications. \u003cstrong\u003eSkin Tite™\u003c\/strong\u003e will release from closely cropped hair-covered skin surfaces (short arm hair, beards, moustaches and eyebrows). \u003c\/p\u003e\r\n\u003cp\u003eInstructions\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eStore and use all products at room temperature (72° F \/ 22°C).\u003c\/strong\u003e This product has a limited shelf life and should be used as soon as possible.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eWe recommend that you do a small scale test on the back of your hand to ensure that you have no allergic reaction to silicone.\u003c\/strong\u003e If you notice any type of skin reaction, do not use product.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eImportant: \u003c\/strong\u003eWarmer temperatures will reduce pot life and accelerate the cure time of \u003cstrong\u003eSkin Tite™\u003c\/strong\u003e.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eSkin Tite™\u003c\/strong\u003e is a platinum-cure silicone. Platinum-cure silicone rubber may be inhibited by certain contaminants such as latex, skin oils, aloe vera, sulfur based clays, urethane rubber and tin-cured silicone rubber resulting in tackiness at the mold interface or a total lack of cure throughout the piece. If compatibility between the rubber and a surface is a concern, a small-scale test is recommended.Inhibition has occurred if the rubber remains uncured after the recommended cure time has passed.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eBecause no two applications are quite the same, a small test application to determine suitability for your project is recommended if performance of this material is in question.\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eAdding Color\u003c\/em\u003e -\u003c\/strong\u003e \u003cstrong\u003eSilc Pig™\u003c\/strong\u003e silicone pigments can added and mixed thoroughly into \u003cstrong\u003eSkin Tite™\u003c\/strong\u003e for matching a skin color, etc.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eMixing \u003c\/em\u003e-\u003c\/strong\u003e \u003cstrong\u003eSkin Tite™\u003c\/strong\u003e can be hand mixed. Aggressively hand mix for 30 seconds, making sure that you scrape the sides and bottom of your mixing container several times.\u003c\/p\u003e\r\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003e1. Using As A Bio-Adhesive\u003c\/strong\u003e\u003c\/em\u003e - \u003cstrong\u003eSkin Tite™\u003c\/strong\u003e can be used to temporarily adhere a previously made platinum silicone prosthetic appliance to human skin.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eHere’s How To Do It:\u003c\/strong\u003e Clean the skin to remove any oils which may affect the curing of the \u003cstrong\u003eSkin Tite™\u003c\/strong\u003e adhesive. Mix the \u003cstrong\u003eSkin Tite™\u003c\/strong\u003e thoroughly (1A:1B). After mixing, brush a small amount of \u003cstrong\u003eSkin Tite™\u003c\/strong\u003e onto the appliance or surface of the skin. Hold the appliance to the skin until the \u003cstrong\u003eSkin Tite™\u003c\/strong\u003e is cured. This should occur in approximately 5 minutes or less, dependant on body temperature. A higher temperature will cause the \u003cstrong\u003eSkin Tite™\u003c\/strong\u003e to cure faster. Once the \u003cstrong\u003eSkin Tite™\u003c\/strong\u003e is cured, it will remain tacky. Use a small amount of \u003cstrong\u003eSkin Tite™\u003c\/strong\u003e to carefully blend the edges of the appliance if needed. After \u003cstrong\u003eSkin Tite™\u003c\/strong\u003e is fully cured, theatrical makeup can be used to further blend and color the piece. To remove the appliance from the skin, slowly peel the piece away from the skin. Using baby oil or make-up remover can assist in removal.\u003c\/p\u003e\r\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003e2. Using To Make Appliances Directly On The Skin\u003c\/strong\u003e \u003c\/em\u003e- \u003cstrong\u003eSkin Tite™\u003c\/strong\u003e can be combined with \u003cstrong\u003eSilc-Pig™\u003c\/strong\u003e silicone pigments and a small amount of \u003cstrong\u003eTHI-VEX™\u003c\/strong\u003e thixotropic additive to create on skin silicone appliances.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eHere’s How To Do It: \u003c\/strong\u003eMix the \u003cstrong\u003eSkin Tite™\u003c\/strong\u003e 1A:1B by weight or volume as normal, add a small amount of pigment and mix again. After the desired color is achieved, add a small amount of \u003cstrong\u003eTHI-VEX™\u003c\/strong\u003e and continue mixing until the desired thickness is achieved. The \u003cstrong\u003eSkin Tite™\u003c\/strong\u003e can now be applied directly to the skin to create scars, cuts, and other appliances. Use a small brush dipped in alcohol to feather the edges of the appliance. After the appliance is fully cured, theatrical makeup can be used to further blend and color the piece. To remove the appliance from the skin, slowly peel the piece away from the skin. Using baby oil or make-up remover can assist in removal.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eHair Covered Skin Surfaces\u003c\/strong\u003e - \u003cstrong\u003eSkin Tite™\u003c\/strong\u003e will release from closely cropped hair-covered skin surfaces (short arm hair, beards, moustaches and eyebrows). If hair is too long, it will become encapsulated in rubber and careful cutting of the hair may be necessary to remove.\u003c\/p\u003e\r\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003e3. Using Skin Tite™ To Cast Into A Mold To Make An Appliance\u003c\/strong\u003e\u003c\/em\u003e - \u003cstrong\u003eSkin Tite™\u003c\/strong\u003e can be combined with \u003cstrong\u003eSilc-Pig™\u003c\/strong\u003e silicone pigments and poured into a mold which will create a re-useable silicone appliance.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eHere’s How To Do It:\u003c\/strong\u003e You can cast \u003cstrong\u003eSkin Tite™\u003c\/strong\u003e into either a platinum silicone mold or a rigid plaster mold. Apply a soap solution (1 part dish soap to 2 parts isopropyl alcohol works well) as a mold release and let dry at least 30 minutes. Mix \u003cstrong\u003eSkin Tite™\u003c\/strong\u003e 1A:1B by weight or volume and cast into the mold. After the casting is fully cured, the mold release should be washed off with warm water and allowed to dry. \u003cstrong\u003eSkin Tite™\u003c\/strong\u003e can be used to temporarily adhere the piece to the skin. Theatrical makeup can be used to further blend and color the piece. After use, remove the piece slowly. Using baby oil or makeup remover can assist in removal.\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/msds\/files\/BD_DS_Eco_Equ_EZB_EZS_Psy_MS_OOMOO_Reb_ST_SS_Soma_Sol_Sorta.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSDS\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/tb\/files\/Skin_Tite.pdf\" target=\"_blank\" rel=\"noopener\"\u003eTDS\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/tb\/files\/SkinSafeDocs\/SkinTiteSkinSafeCertification032519.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSkin Safety Certification\u003c\/a\u003e\u003c\/p\u003e","brand":"Smooth-On","offers":[{"title":"8oz Kit (0.5 lbs. \/ 0.23 kg.)","offer_id":48015740371259,"sku":"88222","price":25.99,"currency_code":"USD","in_stock":false},{"title":"Pint Kit (2 lbs. \/ 0.91 kg.)","offer_id":48015740404027,"sku":"88244","price":50.99,"currency_code":"USD","in_stock":false},{"title":"2 Gallon Kit (16 lbs. \/ 7.26 kg.)","offer_id":48015740436795,"sku":"88261","price":346.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/Skin-Tite-combo-1400x1050_4cb27735-faf5-4629-9ae0-1dce92ee9a82.jpg?v=1754776750","url":"https:\/\/maacaffestore.com\/products\/skin-tite","provider":"The Compleat Sculptor, Inc","version":"1.0","type":"link"}