{"product_id":"solaristrial","title":"Solaris™ w\/ Bonding Primer Trial Size","description":"\u003cdiv class=\"info\"\u003e\n\u003cp\u003e\u003cstrong\u003eSolaris™ \u003c\/strong\u003eis a low viscosity, clear and colorless liquid platinum cure silicone rubber compound designed for use in protecting of electronic components and other assemblies. It will protect components against shock, vibration, moisture, ozone, dust, chemicals and other environmental hazards.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shoplightspeed.com\/shops\/606431\/files\/52783318\/solarisspecs.png\" alt=\"\" width=\"360\" height=\"851\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"features\"\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe optical clarity of Solaris™ makes it suitable for potting solar cells\u003c\/strong\u003e for maximum light transmission or electronic assemblies where component identification is necessary. For best results, use with \u003cstrong\u003eSolaris™ Bonding Primer™\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUltra-transparent \u003cstrong\u003eSolaris™\u003c\/strong\u003e provides excellent UV resistance yet allows maximum transmission of light.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolaris™\u003c\/strong\u003e features a low viscosity which allows easy flow in and around complex shapes, providing excellent electrical insulation and shock resistance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolaris™\u003c\/strong\u003e will cure in deep sections or enclosed assemblies without exotherm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolaris™\u003c\/strong\u003e encapsulant contains no solvents and has no VOC’s.\u003c\/li\u003e\n\u003cli\u003eThe hydrolytic stability of \u003cstrong\u003eSolaris™ \u003c\/strong\u003emakes it suitable in high humidity environments and at elevated temperatures.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstructions\u003c\/h2\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eSafety \u003c\/strong\u003e\u003c\/em\u003e– Use in a properly ventilated area (“room size” ventilation). Wear safety glasses, long sleeves and rubber gloves to minimize contamination risk. Wear vinyl gloves only. Latex gloves will inhibit the cure of the rubber.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStore and use material at room temperature (73°F\/23°C).\u003c\/strong\u003e Storing material at warmer temperatures will reduce the usable shelf life of unused material. These products have a limited shelf life and should be used as soon as possible.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eFOR MAXIMUM ADHESION TO GLASS - USE SOLARIS™ BONDING PRIMER...\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAll glass surfaces must be clean before applying Solaris™ Bonding Primer™\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eGlass surface preparation:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStep 1\u003c\/strong\u003e- Wipe glass surfaces using Isopropyl Alcohol applied with lintfree paper towels. Let dry for 10 minutes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStep 2\u003c\/strong\u003e - Wipe the glass surfaces with ammonia-based glass cleaner applied with lint-free paper towels. Let dry for 10 minutes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: \u003c\/strong\u003eDo not touch glass surface after cleaning.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhen glass surface is clean, apply one coat of Solaris™ Bonding Primer™ using a clean, dry paint brush and let dry for 10 minutes.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA hazy film will form on the glass surface. Wipe away film using a lintfree cloth until surface is clear.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApply a second coat of Solaris™ Bonding Primer™, let dry for 10 minutes and wipe surface until clear.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYou are now ready to apply the \u003cstrong\u003eSolaris™\u003c\/strong\u003e Silicone Encapsulant to the prepared glass surface.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eCURE INHIBITION...\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSolaris™\u003c\/strong\u003e silicone rubber compound will cure in contact with most clean, dry surfaces. However, certain materials, such as butyl and chlorinated rubber, materials containing sulfur, amines, and non-platinum RTV silicone rubber compounds will cause cure inhibition and rubber will not cure.\u003c\/p\u003e\n\u003cp\u003eIf compatibility between the rubber and the surface is in question, a smallscale test is recommended. Inhibition has occurred if the rubber is gummy or uncured after the recommended cure time has passed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBecause no two applications are quite the same, a small test application to determine suitability for your project is recommended if performance of this material is in question.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eMEASURING \u0026amp; MIXING...\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eBefore you begin, pre-mix Part B thoroughly. After dispensing required amounts of Parts A and B into mixing container (1A:1B by volume or weight), \u003cstrong\u003emix thoroughly for 3 minutes\u003c\/strong\u003e making sure that you scrape the sides and bottom of the mixing container several times. After mixing thoroughly for 3 minutes, empty the contents of your mixing container into a \u003cstrong\u003esecond clean mixing container and mix again for another 2 to 3 minutes\u003c\/strong\u003e before pouring. This technique is your best bet for successful mixing.\u003c\/p\u003e\n\u003cp\u003eFor best results, vacuum degassing is recommended to help eliminate any entrapped air. Subject mixture to 29” of mercury in a vacuum chamber until mixture rises, breaks and falls. Allow for 3 to 4 times volume expansion in mixing container. Be aware of pot life so that material does not set up in mixing container.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003ePouring\u003c\/em\u003e - \u003c\/strong\u003eFor best results, pour your mixture in a single spot at the lowest point of the containment field. Let the rubber seek its own level. \u003cstrong\u003eA uniform flow will help minimize entrapped air.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eCuring\u003c\/strong\u003e\u003c\/em\u003e - Allow rubber to cure for 24 hours at room temperature (73°F\/23°C) before demolding. Do not cure rubber where temperature is less than 65°F\/18°C.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/msds\/files\/BD_DS_Eco_Equ_EZB_EZS_Psy_MS_OOMOO_Reb_ST_SS_Soma_Sol_Sorta.pdf\" rel=\"noopener\" target=\"_blank\"\u003eSDS\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/msds\/files\/Solaris_Primer.pdf\" rel=\"noopener\" target=\"_blank\"\u003ePrimer SDS\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/tb\/files\/Solaris_TB.pdf\" rel=\"noopener\" target=\"_blank\"\u003eTDS\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Smooth-On","offers":[{"title":"Default","offer_id":48015136391483,"sku":"28340","price":86.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/Solaris-Kit-hand-1400x1050.jpg?v=1754768889","url":"https:\/\/maacaffestore.com\/products\/solaristrial","provider":"The Compleat Sculptor, Inc","version":"1.0","type":"link"}