{"product_id":"urecoat","title":"UreCoat™","description":"\u003cp\u003e\u003cstrong\u003eUreCoat™\u003c\/strong\u003e is a two component urethane (A+B) that can be mixed and brushed onto a variety of surfaces to provide a flexible, tough and impact resistant coating. Mix ratio is 100A:10B by weight (gram scale required), pot life is 8 minutes, re-coat time is 30 minutes, tack free time is 2 hours and full cure is 16 hours at 73°F\/23°C. \u003cstrong\u003eUreCoat™\u003c\/strong\u003e contains no phthalates or VOC's.\u003c\/p\u003e\r\n\u003cp\u003eFeatures\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\n\u003cstrong\u003eAdhesive\u003c\/strong\u003e - \u003cstrong\u003eUreCoat™\u003c\/strong\u003e will bond to many surfaces and can be used as a flexible coating for expanded polystyrene (EPS foam), fabric, some metals and plastics, wood, rope and more.\u003c\/li\u003e\r\n\u003cli\u003e\n\u003cstrong\u003eStrong\u003c\/strong\u003e - Cured rubber is tough and UV resistant. \u003cstrong\u003eUreCoat™\u003c\/strong\u003e has been used to repair damaged or deteriorated latex animatronic skins, masks, etc.\u003c\/li\u003e\r\n\u003cli\u003e\n\u003cstrong\u003eColor Neutral\u003c\/strong\u003e - \u003cstrong\u003eUse as a Flexible Paint Base:\u003c\/strong\u003e \u003cstrong\u003eUreCoat™\u003c\/strong\u003e is easily colored with \u003cstrong\u003eSO-Strong™\u003c\/strong\u003e, \u003cstrong\u003eUVO™\u003c\/strong\u003e or \u003cstrong\u003eIgnite™\u003c\/strong\u003e colorants to create a permanent paint for coating cured Smooth-On urethane rubbers or flexible foams. Cured \u003cstrong\u003eUreCoat™\u003c\/strong\u003e will bend and flex with the rubber or foam part.\u003c\/li\u003e\r\n\u003cli\u003e\n\u003cstrong\u003eCreate a Matte Surface\u003c\/strong\u003e - You can create a matte finish using UreCoat™ Matting Powder\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shoplightspeed.com\/shops\/606431\/files\/52866554\/urecoatspecs.png\" alt=\"\" width=\"400\" height=\"711\"\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shoplightspeed.com\/shops\/606431\/files\/52866553\/urecoatcoverage.png\" alt=\"\" width=\"524\" height=\"264\"\u003e\u003c\/p\u003e\r\n\u003cp\u003eInstructions\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eAmount to Mix and Apply at One Time\u003c\/strong\u003e - Because this is a coating, a small amount goes a long way. Mix only what you can comfortably brush on to your target surface in 8 minutes before material sets up.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eMeasuring and Mixing\u003c\/strong\u003e - Before you begin, pre-mix Part B thoroughly to re-disperse components that may have settled. A gram scale is required to accurately measure 100 Parts A to 10 Parts B. After dispensing into a mixing container, mix thoroughly for 2 - 3 minutes using a square edged mixing stick. Aggressively scrape the sides and bottom of the mixing container several times. Use the square edge of the stick to bring material off of the sides of the container and blend.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eExtending Working Time\u003c\/strong\u003e - Reduce the mass of the mixture to increase working time. Example: layer two sheets of aluminum foil together and create a single-use flat tray with vertical sides to contain the liquid. After mixing parts A and B, pour mixture into the aluminum foil to reduce the mass. Your working time will be significantly increased. Applying - Apply a thin layer to the surface, making sure there are no brush strokes. Wait 30 minutes for material to partially cure and apply a second layer. Subsequent layers can be added as desired.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eThinning\u003c\/strong\u003e - To thin \u003cstrong\u003eUreCoat™\u003c\/strong\u003e, the recommended mix ratio is 100 Parts A + 10 Parts B + 25 or more Parts of 99% isopropyl alcohol or acetone depending on the application. Pre-mix solvent into Part A before adding Part B. Observe all safety precautions when handling solvents. Mix thoroughly to a uniform color (no streaks).\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eThickening\u003c\/strong\u003e - \u003cstrong\u003eUreCoat™\u003c\/strong\u003e can be thickened to a paste-like consistency for brushing or troweling onto surfaces. \u003cstrong\u003eUre-Fil™ 11\u003c\/strong\u003e is an effective filler for thickening this material. The recommended maximum filler load when using \u003cstrong\u003eUre-Fil™ 11\u003c\/strong\u003e is 100 parts \u003cstrong\u003eUreCoat™\u003c\/strong\u003e Part A to 10 parts \u003cstrong\u003eUreCoat™\u003c\/strong\u003e Part B to 15 parts filler by weight. Ensure filler is dry, and pre-mix filler with Part A before combining with Part B.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eSurface Finish\u003c\/strong\u003e - \u003cstrong\u003eUreCoat™\u003c\/strong\u003e UreCoat™ will cure with a high gloss surface finish. If a matte surface finish is desired, we recommend using \u003cstrong\u003eUreCoat™ Matting Powder\u003c\/strong\u003e to create a permanent matte finish. UreCoat™ Matting Powder is combined with solvent and UreCoat™ which results in a long-lasting matte surface once the UreCoat™ is cured. See the UreCoat™ Matting Powder TB for more information.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eCuring\u003c\/strong\u003e - Allow \u003cstrong\u003eUreCoat™\u003c\/strong\u003e to cure overnight (at least 16 hours) at room temperature (73°F\/23°C) before handling. Full cure time can be reduced heating the material 150°F\/60°C for 4 hours. Allow \u003cstrong\u003eUreCoat™\u003c\/strong\u003e to come to room temperature before handling. Clean Up - Gently scrape as much uncured material from surface as possible with flat edge tool. Remove remaining uncured \u003cstrong\u003eUreCoat™\u003c\/strong\u003e with alcohol.\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/msds\/files\/1146A_1-1146B_1.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSDS\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/tb\/files\/URECOAT_TB.pdf\" target=\"_blank\" rel=\"noopener\"\u003eTDS\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/msds\/files\/URECOAT%20MATTING%20POWDER_REV_1%20SDS.pdf\" target=\"_blank\" rel=\"noopener\"\u003eMatting Powder SDS\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/www.smooth-on.com\/tb\/files\/URECOAT_MATTING_POWDER_TB.pdf\" target=\"_blank\" rel=\"noopener\"\u003eMatting Powder TDS\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e","brand":"Smooth-On","offers":[{"title":"Trial Kit (1.1 lbs. \/ 0.5 kg.)","offer_id":48015767142715,"sku":"73644","price":21.99,"currency_code":"USD","in_stock":true},{"title":"Gallon Kit (8.8 lbs. \/ 3.99 kg.)","offer_id":48015767175483,"sku":"73661","price":81.99,"currency_code":"USD","in_stock":true},{"title":"Matting Powder (0.66 lbs. \/ 0.3 kg.)","offer_id":48015767208251,"sku":"127760","price":32.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/urecoat-combo-533x400-1-1.jpg?v=1710989147","url":"https:\/\/maacaffestore.com\/products\/urecoat","provider":"The Compleat Sculptor, Inc","version":"1.0","type":"link"}