{"product_id":"ws-series-matting-powder","title":"WS-Series Matting Powder","description":"\u003cp\u003eWS-Series Matting Powder is a unique blend of water-based matting agents designed to eliminate the shine from painted silicone surfaces, resulting in a flat matt finish with little or no sheen. \u003cbr\u003eWS Matting Powder residue washes off clean with a little soap and warm water, dries clear, and does not leave a \"blue\" tint to the surface, unlike Cabosil. In fact WS Matting Powder contains NO Amorphous silica or Cabosil. \u003c\/p\u003e\r\n\u003cp\u003eWS Matting Powder  is normally used in conjunction with FuseFX M\/F-110 Clear. A very thin layer of M\/F-110 Clear  is applied to the piece and, while the piece is still wet, WS Matting Powder is sprinkled over the surface. The M\/F-110 Clear thus acts as a binding agent, bonding the matting powder to the surface. After curing, excess matt powder is washed away with soap and water.\u003cbr\u003eBecause of this partnership, WS Matting Powder is available on its own OR in kit form, accompanied by M\/F-110 Clear.\u003c\/p\u003e\r\n\u003cp\u003eSizes\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e60g (2 oz)\u003c\/li\u003e\r\n\u003cli\u003e150g (8oz by volume)\u003c\/li\u003e\r\n\u003cli\u003e60g (2 oz) Kit with 30g (1oz) M\/F-110 Clear\u003c\/li\u003e\r\n\u003cli\u003e150g (8oz by volume) Kit with 30g (1oz) M\/F-110 Clear\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003eFuseFX WS-Series Matting Powder is a unique blend of water base matting agents\u003cbr\u003edesigned to eliminate the shine off of silicone painted surfaces, giving it a flat matt finish with\u003cbr\u003elittle to no sheen.\u003cbr\u003eFuseFX WS-Series Matting Powders must be used with M\/F-110 Clear and both should be\u003cbr\u003ecatalyzed together for best results.\u003cbr\u003eFuseFX WS-Series Matting Powders contains NO Amorphous Silica and NO Cabosil.\u003cbr\u003ePlease use an appropriate dust mask when using this product.\u003cbr\u003eHow to use:\u003cbr\u003eAfter completing the final coat, touch-ups or airbrushed painting, mix equal amounts of Part A\u003cbr\u003eand Part B of M\/F-110 Clear. Apply a thin coat of M\/F-110 Clear to the piece and let cure or\u003cbr\u003eforce dry with a hair dryer. Apply a second coat of M\/F-110 Clear, this time very lightly, just\u003cbr\u003eenough to “wet” the surface. Go over the surface with a “dry” brush to pick up any extra blobs\u003cbr\u003eof paint making the surface even. The surface must be just moist otherwise it will leave little\u003cbr\u003especks of white powder. In this case you can touch it up the white spots by carefully\u003cbr\u003escrapping off or touching up with a little color.\u003cbr\u003eWhile the M\/F-110 Clear is still wet, loosely apply the FuseFX Matting Powder by sprinkling\u003cbr\u003eor using a dry “fluff” brush stippling the surface as you go, do not rub. A small Make-up Artist\u003cbr\u003e“Blush Brush” works great. You don’t have to apply lots of powder just a little stippling to\u003cbr\u003ecover the surface. A little goes a long way.\u003cbr\u003eOnce the surface is fully covered, use a hair dryer to force catalyzed the Clear and Powder\u003cbr\u003etogether for MINIMUM of 3 to 5 minutes or let cure for about 3 hours. You may also place\u003cbr\u003ethe powdered piece IN A WARM OVER ONLY. Too hot may cause the powder to crystallize,\u003cbr\u003ecreating an uneven surface.\u003cbr\u003eOnce cured, you can wash the prosthesis under warm to hot water and a little soap, pat dry\u003cbr\u003eand the surface is now ready.\u003cbr\u003eIf you missed any spots, simply apply a thin coat of M\/F-110 Clear to the shiny areas and\u003cbr\u003eadd a little FuseFX Matting Powder.\u003cbr\u003eAgain, use a hair dryer to force cure the clear and powder together for MINIMUM of 3 to 5\u003cbr\u003eminutes.\u003cbr\u003eOnce cured, you can wash the prosthesis under warm water and a little soap and pat dry.\u003cbr\u003eIf you find that the surface is too matt, you can always add a little sheen back to your already\u003cbr\u003ematt surface by stippling a very light thin coat of M\/F-110 Clear.\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/www.fusefx.ca\/_files\/ugd\/80ab92_a5ce83b1a24842829810d65ee6f7ba37.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSDS\u003c\/a\u003e\u003c\/p\u003e","brand":"FUSEFX","offers":[{"title":"2oz","offer_id":48016121135419,"sku":"WS2oz","price":9.99,"currency_code":"USD","in_stock":true},{"title":"8oz","offer_id":48016121168187,"sku":"WS8oz","price":18.99,"currency_code":"USD","in_stock":false},{"title":"Small Kit WSK-2","offer_id":48016121200955,"sku":"WSK2","price":49.99,"currency_code":"USD","in_stock":true},{"title":"Large Kit WSK-8","offer_id":48016121233723,"sku":"WSK8","price":54.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/7539\/6411\/files\/mattingpowder2oz_af823dd3-01bd-41cd-8ec1-70a0adc19c5d.png?v=1713650720","url":"https:\/\/maacaffestore.com\/products\/ws-series-matting-powder","provider":"The Compleat Sculptor, Inc","version":"1.0","type":"link"}